GovChime
Notice ID: f2c1ae5447347a41bf2f9780d052b2a8Award NoticeAwarded

Sewr Line Jetter Equipment

Awarded on September 19, 2014. Full description on SAM.gov.

Awarded tounder 70LART18PPPFB00035 (source: SAM.gov award notice)• $40.0K

Overview

Posted
November 15, 2018
Notice type
Award Notice
NAICS
333318: Classification Not Available
Agency
Department of Homeland SecurityFEDERAL LAW ENFORCEMENT TRAINING CENTER

Notice details

Office
FLETC ARTESIA PROCUREMENT OFFICE
Place of performance
1300 W. Richey Ave. , Artesia, NM, 88210
PSC
45: PLUMBING, HEATING, WASTE DISPOSAL
Last updated
Dec 2, 2025
Award date
Sep 19, 2014
Award amount (SAM.gov award notice)
$40.0K

Identifiers

Solicitation number
70LART18QPFB00024
Notice ID
f2c1ae5447347a41bf2f9780d052b2a8
Award number (PIID)
70LART18PPPFB00035

Description

This is a combined synopsis/solicitation for commercial its prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation constitutes the only solicitation: quotations are being requested and a written solicitation will not be issued. The solicitation document and incorporated provisions and clauses are those in effect through the Federal Acquisition Circular 2005-82. The reference number is 70LARTQPFB00024 and is issued as a Request for Quotes (RFQ) unless otherwise indicated herein. This requirement is 100% set-aside for small business concerns. The associated North American Industry Classification System (NAICS) code 333318. The size standard is 1000. The DHS Federal Law Enforcement Training Center, located at 1300 W. Richey Ave., Artesia, New Mexico 88210 has a requirement for: Complete Hot water, DOT approved, Trailer Mounter Hydro-Jetting System such as Hot Jet 1, item number HJ1SA1038HW sewer line jetter, or equivalent per requirement on Statement of Work, all applicable Federal, State and local taxes. Requirement FOB. Please see the attached Statement of Work. Delivery Location: Federal Law Enforcement Training Centers, 94 Gunpowder Road, Artesia, New Mexico 88203. Note: To receive an award resulting from this solicitation, offerors must be registered in the system for Award Management (SAM) database at https://www.sam.gov. Offerors are encouraged to, and must upon request, present their representations and certifications through the SAM data base at https://www.sam.gov. The following commercial item terms and conditions apply: Please see attached for applicable terms and conditions. To view clauses in full text, visit https://www.acquisition.gov/?q+browsefar. Questions are to submitted NLT 2:00 p.m. MST on, September, 11th,2018 and all questions and responses must be in writing. Send questions and responses to filipita.dennis@dhs.gov, or mail to address: Federal Law Enforcement Training Center, Bldg. 4, Artesia, New Mexico 88210, or Fax: 575-748-8002. Close date for bid: September 12th, 2018, 10:00 am, Mountain Standard Time.

Full description on SAM.gov

Award Overview

Award Number

70LART18PPPFB00035

Award Amount (SAM.gov award notice)

$40.0K

Award Date

Sep 19, 2014

Awardee

Awardee UEI

EMDJWAEBNUE5

Original Solicitation

Notice ID: f2c1ae5447347a41bf2f9780d052b2a8

Posted Date: Nov 15, 2018

Original Response Deadline: Not specified

Contract Details

Contract data not yet available

Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.

Contacts

Documents

Select documents to download

Showing 2 of 2 items

Document
Source
Agency
Posted Date
File Size
Actions
Combined Synopsis/SolicitationFEDERAL LAW ENFORCEMENT TRAINING CENTERNov 15, 2018-
Combined Synopsis/SolicitationFEDERAL LAW ENFORCEMENT TRAINING CENTERNov 15, 2018-

Lifecycle

Solicitation:70LART18QPFB00024
  1. Combined Synopsis
  2. Awarded

This opportunity has been awarded.

  1. Combined SynopsisSep 4, 2018

    Hot Water Hrdro Jetting System Self Contained

    Notice 7beed41149e0fdd86a7a18b24ce3b960 on SAM.gov

  2. AwardedCurrentNov 15, 2018

    Sewr Line Jetter Equipment

    Notice f2c1ae5447347a41bf2f9780d052b2a8 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
A gigapixel camera that captures three-dimensional images in a single shot Creating 3D images usually requires multiple cameras or repeated measurements. GigaPic-3D can capture a gigapixel image in a single exposure. The camera uses light-field imaging, a technique that records both the amount of light and the direction it travels, allowing software to reconstruct 3D images and refocus them after they have been captured. The same camera architecture can also be configured for imaging across a broad range of wavelengths, including visible light and X-rays. This flexibility allows one platform to support scientific, industrial, security and medical applications. Overview GigaPic-3D combines many image sensors into a single camera. Together, these sensors produce images containing billions of pixels. Most gigapixel imaging systems create a final image by collecting many separate photographs and stitching them together. GigaPic-3D captures the entire scene in a single shot, reducing image collection time and eliminating the need to align multiple images before processing. Unlike a conventional camera that records only the brightness of light, GigaPic-3D’s light-field imaging also records the direction that light travels. Its software uses this information to create 3D images and adjust the focus after the image has been captured. The modular design can be adapted for visible light, ultraviolet light, infrared light or X-ray imaging by selecting different optical components and radiation-conversion materials. Advantages Captures gigapixel images in a single shot Produces 3D images from a single exposure Allows images to be refocused after they are captured Eliminates the need to stitch together multiple photographs Built primarily from commercially available components Configurable for imaging from visible light through X-rays Modular design supports different sensors, optics and camera configurations Integrated processing reconstructs images directly from the collected data Technology Description GigaPic-3D uses several layers that work together to capture and process an image. Light first passes through an optical layer that directs it onto an array of image sensors. For X-ray imaging, the system includes materials that convert X-rays into visible light that conventional image sensors can detect. Instead of relying on one large image sensor, the camera combines many smaller commercial sensors into a single array. Because the sensors remain in fixed positions, they work together as one imaging system, eliminating the repeated alignment required when combining images from separate cameras. The camera records both the brightness and direction of incoming light. Reconstruction software then creates a high-resolution image, generates 3D views and allows users to refocus the image after it has been captured. Because the system is modular, different image sensors, optical components and detector materials can be combined to meet the needs of different applications while using the same overall camera design. Market Applications Scientific and Research Imaging (astronomy and space imaging, fusion diagnostics) Industrial and Manufacturing (inspection, non-destructive testing, machine vision, advanced manufacturing) Medical and Biomedical (imaging, gigamacro applications) Environmental and Agricultural Monitoring (remote sensing, observation) Cultural Heritage and Preservation (high-resolution imaging, museum-grade digitization) Technology Readiness Level 3 LA-UR-26-28965 US Patent No. 12,574,655
-Special Notice03/06/2027
The True Silicone DLP Printing Platform from Los Alamos National Laboratory allows for more geometries in producing genuine silicone parts, gaskets, lattices, prosthetic components or microfluidic devices on an off-the-shelf desktop printer typically required by specialty extrusion equipment. The result is a material whose polymer backbone is built entirely of silicon-oxygen bonds rather than the carbon-based linkages that quietly compromise so-called silicones on the market today. The True Silicone DLP Printing Platform unlocks that capability through a precursor resin and a paired printing workflow that together deliver real silicone parts free of metal catalyst residues, with tunable porosity, geometric complexity and the aging stability that demanding applications require. How it Works The platform begins with a printable resin that blends a polymerizable scaffold with a curable siloxane component, along with a photoinitiator and a small amount of a light-absorbing dye to control polymerization depth. A standard DLP printer cures the acrylic scaffold layer by layer to lock the geometry in place, after which the part is heated so the siloxane oligomers crosslink into a continuous silicone network alongside the scaffold. A wash in ethanol, water or ammonium hydroxide then dissolves the sacrificial scaffold, leaving behind a pure silicone object whose polymer backbone consists solely of silicon–oxygen bonds and retains a porous structure where the sacrificial scaffold was removed. Technology Description At its core, the True Silicone DLP Printing Platform relies on a printable resin that combines two chemistries chosen to work in tandem: an acrylic component that polymerizes quickly under light to hold the printed geometry, and a silicone component that cures more slowly into the final material. During printing, these two phases remain mixed but separate into interwoven networks, an arrangement that lets the silicone retain the intended shape once the acrylic is later removed. A small amount of light-absorbing dye keeps polymerization confined to the intended pattern, and the resin is engineered to flow and cure reliably on standard DLP hardware. After printing, the part is gently heated to complete formation of the silicone network, then soaked in an alcohol or water-based wash, sometimes assisted by UV light or a mild base, to dissolve away the sacrificial acrylic scaffold. What remains is a silicone object whose polymer backbone is built entirely from silicon-oxygen bonds, with mechanical properties and a controllably porous structure whose open pores can be accessed after printing to imbue the silicone with new functionalities, for example by infusing conductive or otherwise active materials. The overall workflow is compatible with inexpensive commodity printers and lends itself to scaling through emerging light-based manufacturing techniques, while the same scaffold-and-wash strategy offers a template for printing other materials that have historically been difficult to fabricate by photopolymer methods. Advantages Produces true silicone with a continuous silicon-oxygen backbone, avoiding the aging and chemical-compatibility weaknesses of pseudo-silicone alternatives Runs on widely available, low-cost DLP printers rather than specialized direct-ink-write equipment Cures whole layers at once, delivering meaningfully higher throughput than extrusion-based silicone printing Yields parts free of residual metal catalysts, simplifying regulatory and biocompatibility pathways Allows tunable mechanical properties and porosity through resin ratios and porogenic solvent choice Extensible in principle to other material systems that currently resist photopolymer printing through the same sacrificial-scaffold approach Market Applications Medical and Consumer Health (prosthetics, wearable devices, soft implants) Sensing (stretchable circuits, soft robotics components) Microfluidics (lab-on-chip components, custom flow cells) Aerospace and Defense (cushioning foams, vibration-isolation components, sealing parts) Optics and Photonics (soft lenses, light-guiding elements) Consumer and Household Goods (kitchenware, mattresses, apparel components) Development Status: TRL 4 U.S. Patent No. 11,939,415 LA-UR-26-24892 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
-Special Notice01/07/2027
-Awarded07/15/2022
Please review "RELATED NOTICE: W900KK-23-R-LTRaC" posted against NAICS code 332999-All Other Misc. Fabricated Metal Product Manufacturing. Several North American Industry Classification System (NAICS) codes being considered for the LTRaC effort: a) LOT 1 – Full and Open (Target Lifters & TRACR Computers): NAICS 332999 (All Other Misc. Fabricated Metal Product Manufacturing) b) LOT 2 – Small Business Set Aside (FASIT, DRTS, HITS, JPMCR, CTS Tech Refresh): NAICS 333310 (Commercial and Service Industry Machinery Manufacturing) c) LOT 3 – Full and Open (DRTS Tech Refresh): NAICS 333318 (Other Commercial and Service Industry Machinery Manufacturing) d) LOT 4 – Full and Open (CTCs, HITS, STE-LIVE, JPMRC Efforts): NAICS 333310 (Commercial and Service Industry Machinery Manufacturing) Due to SAM.gov software limitations, each Notice published can only be posted against only one NAICS code. The proposed Live Training, Ranges, and Combat Training Centers (LTRaC) solicitation will include the three (3) NAICS codes listed above. Vendors interested in the LTRaC effort are invited to search 'Notice ID' W900KK-23-R-TRaC for the detailed description of the requirement.
-Market Research08/01/2022
-Awarded03/04/2022

Additional Details

Solicitation Number

70LART18QPFB00024

Archive Date

Aug 21, 2019

Office Address

ARTESIA, NM, 88210