GovChime
Notice ID: 05308ec09f920e8fd632f80c18c3a8faCombined Synopsis/Solicitation

Simulator Seats

Archived on April 2, 2019. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
11:00 AM UTC−05:00
Posted
July 20, 2018
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
336413: Other Aircraft Parts and Auxiliary Equipment Manufacturing
Agency
Department of Homeland SecurityTRANSPORTATION SECURITY ADMINISTRATION

Notice details

Office
CONTRACTING AND PROCUREMENT
Place of performance
Nationwide
PSC
16: AEROSPACE CRAFT COMPONENTS AND ACCESSORIES
Last updated
Dec 4, 2025

Identifiers

Solicitation number
70T05018Q9NFDO041
Notice ID
05308ec09f920e8fd632f80c18c3a8fa

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation number 70T05018Q9NFDO041 is hereby issued as a request for quote (RFQ) in accordance with FAR Parts 12 and 13.5. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-97, effective January 24, 2018. This requirement is 100% set-aside for small business concerns. The NAICS code is 336413, and the small business size standard is 1,250 employees. The Government reserves the right to make multiple awards. 1.0 General Requirement Information The Transportation Security Administration (TSA) has a requirement for an Indefinite Delivery Indefinite Quantity (IDIQ) contract for engineered cockpit seats delivered and installed to TSA CONUS locations only. The minimum contract value is $30,000.00 and the maximum contract value is $800,000.00. The IDIQ will have a base period of one year with two (2) one-year option periods. (a) TSA warranted Contracting Officers are authorized to place orders against this IDIQ, limited to their delegation of authority. (b) Delivery tickets. All shipments under the contract shall be accompanied by delivery tickets or sales slip that shall contain the following minimum information: (i) Name of supplier. (ii) IDIQ contract number. (iii) Date of purchase. (iv) Purchase number. (v) Itemized list of supplies furnished. (vii) Date of delivery or shipment. Order Acknowledgment: The Contract holder shall: • Provide a receipt to acknowledge the order. • Notify the ordering activity if an item is out of stock. Under no circumstance is the Contractor permitted to make unauthorized substitutions. • Seek approval for partial shipments, prior to ordering, from the CO, Contracting Officer's Representative (COR), or authorized purchaser. • Indicate unfilled orders and partial shipments on the order acknowledgement. Contractors must inform ordering organizations of the availability dates for unfilled and partial shipment orders. • Provide a shipping notification. • Provide an automatic tax exemption, where applicable, for all purchases covered under this IDIQ. 2.0 Technical Requirements TSA requires engineered cockpit seats for use in Government-owned flight simulators. The contractor shall provide and routinely maintain, as applicable by agreement and/or warranty, multiple engineered seats to be utilized in a mat room or a Flight Deck Simulator (FDS) environment. 2.1 The seats shall include the following specifications: a) Equipped with functional 5-point harness buckle congruent to 737 airframe pilot seatbelt b) All seats should be able to accommodate the opening for yoke c) Seats must pose no hazards to users including those of cutting, scratching or pinch points d) Flip up, functional armrests e) The seats shall be covered with tear resistance material that can be easily wiped with a wet cloth for cleaning and disinfecting. Material shall not absorb sweat, blood, bodily fluids, etc. f) Headrest molded with back of the seat, non-removable. Dimensions of the headrest must replicate the size and dimensions of a 737 pilot seat headrest. g) Seats shall both fit the Captain and First Officer positions, interchangeably. h) Capable of being secured to plywood or concrete flooring. i) Construction of the seats should be of a steel frame with all exterior areas padded for user protection during dynamic self-defense movements. 2.2 The following specifications may have a variance of up to one inch: a) Seats must replicate the size and dimensions of a 737 pilot seat or an equivalent plane's pilot seat. 2.3 Additional requirements: a) 3-year warranty covering manufacturers defects on materials and workmanship, improper installation, breakage, fit and finish, including the padding. b) Contractor shall install new seats and dispose of old seats. 2.4 Pricing Table Quantities in the table below are PER SEAT. Estimated quantities are for evaluation purposes only. The price shall include installation at the specified delivery location and removal of replaced seat-if any. Base Year CLINS FOB Destination Base Year Estimated Quantities Unit Price Extended Price 00001 seats to Artesia, New Mexico 7 00002 seats to Dallas, Texas 5 00003 seats to Atlanta, Georgia 5 00004 seats to Atlantic City, New Jersey 6 Option Year 1 CLINS FOB Destination Option Year 1 Estimated Quantities Unit Price Extended Price 10001 seats to Artesia, New Mexico 7 10002 seats to Dallas, Texas 5 10003 seats to Atlanta, Georgia 5 10004 seats to Atlantic City, New Jersey 6 Option Year 2 CLINS FOB Destination Option Year 2 Estimated Quantities Unit Price Extended Price 20001 seats to Artesia, New Mexico 7 20002 seats to Dallas, Texas 5 20003 seats to Atlanta, Georgia 5 20004 seats to Atlantic City, New Jersey 6 Firm fixed price to include FOB Destination shipping. TSA is a tax exempt. 3.0 Delivery and Shipping The Contractor will ensure that all parts, assemblies, materials, and components necessary for a complete installation are delivered, no more than 60 calendar days after the award of the order. The Contractor will ensure that all parts, assemblies, materials, and components are delivered to the project location before onsite work begins. Coordination of delivery shall take place through the COR at least ten (10) business days in advance of delivery. Facilities leased by the FAMS may have specific requirements and/or restrictions concerning delivery and installation of the seats that must be coordinated through the COR and the local building management. In addition, some locations will require the Contractor to utilize the building's freight elevator to the final assembly location. The Contractor shall ensure that a valid registration and proof of insurance is inside each vehicle employed in this effort, whether in the delivery of parts, assemblies, materials, components and systems, or the transport of tools and/or equipment or personnel. The project location is a secure facility and an escort will be provided at all times. The Contractor will remove all debris generated from the installation of the FDS and dispose of them off-site in accordance with all Federal, State, and local applicable regulations. DHS/TSA/OLE-FAMS Delivery/installation Addresses: 1. Atlantic City, NJ (ACY) 200 West Parkway Drive- Suite 300 Egg Harbor Township, NJ 08234 Attn: Jim Galvin 2. FLETC - Artesia, New Mexico FLETC Artesia Facility 1300 W. Richey Avenue Artesia, NM 88210 Attn: Matt Lear 3. FFDO Dallas Training Center 500 Airline Drive - Suite 40 Coppell, Texas 75019 Attn: David Murphy 4. FFDO Training Center Atlanta 1075 South Inner Loop Rd College Park GA 30337 Attn: Marc Smith Shipment Notification The Contract Holder shall send notification to the email address specified by the purchaser. This email must include the order number, shipping method, i.e., Fed-Ex, USPS, etc., and tracking information (where applicable). 3.0 Contract Administration Data G.5200. 242.001 CONTRACTING OFFICER'S REPRESENTATIVE (COR) AND TECHNICAL MONITORS (JUL 2015) 1. The principle role of the COR is to support the Contracting Officer in managing the contract. This is done through furnishing technical direction within the confines of the contract, monitoring performance, ensuring requirements are met within the terms of the contract, and maintaining a strong relationship with the Contracting Officer. As a team the Contracting Officer and COR must ensure that program requirements are clearly communicated and that the agreement is performed to meet them. The principle role of the Technical Monitor (TM) is to support the COR on all work orders, tasks, deliverables and actions that require immediate attention relating to the approved scope and obligated funding of the contract action. 2. The Contracting Officer hereby designates the individual(s) named below as the Contracting Officer's Representative(s) and Technical Monitor(s). Such designations(s) shall specify the scope and limitations of the authority so delegated. TSA CORs: NAME: Rajesh Sabharwal PHONE NUMBER: 703-487-0089 EMAIL: Rajesh.Sabharwal@tsa.dhs.gov 3. The COR(s) and TM(s) may be changed at any time by the Government without prior notice to the Contractor, but notification of the change, including the name and phone number of the successor COR, will be promptly provided to the Contractor by the Contracting Officer in writing. 4. The responsibilities and limitations of the COR are as follows: • The COR is responsible for the technical aspects of the project and technical liaison with the Contractor. The COR is also responsible for the final inspection and acceptance of all reports and such other responsibilities as may be specified in the contract. • The COR may designate assistant COR(s) to act for him/her by naming such assistant in writing and transmitting a copy of such designation through the Contracting Officer to the Contractor. • The COR will maintain communications with the Contractor and the Contracting Officer. The COR must report any observed fraud, waste, or opportunities to improve performance of cost efficiency to the Contracting Officer. • The COR will immediately alert the Contracting Officer to any possible Contractor deficiencies or questionable practices so that corrections can be made before the problems become significant. • The COR is not authorized to make any commitments or otherwise obligate the Government or authorize any changes which affect the contract's price, terms or conditions. Any Contractor request for changes shall be referred to the Contracting Officer directly or through the COR. No such changes shall be made without the expressed prior authorization of the Contracting Officer. • The COR is not authorized to direct the Contractor on how to perform the work. • The COR is not authorized to issue stop-work orders. The COR may recommend the authorization by the Contracting Officer to issue a stop work order, but the Contracting Officer is the only official authorized to issue such order. • The COR is not authorized to discuss new proposed efforts or encourage the Contractor to perform additional efforts on an existing contract or order. 5. The responsibilities and limitations of the TM are as follows: • Coordinating with the COR on all work orders, task, deliverables and actions that require immediate attention relating to the approved scope and obligated funding of the contract action. • Monitoring the Contractor's performance in relation to the technical requirements of the assigned functional area of the contract to ensure that the Contractor's performance is strictly within the contract's scope and obligated funding. • Ensuring that all recommended changes in any work under the contract are coordinated and submitted in writing to the COR for consideration. • Informing the COR if the Contractor is not meeting performance, cost, schedule milestones. • Performing technical reviews of the Contractor's proposals as directed by the COR. • Performing acceptance of the Contractor's deliverables as directed by the COR. • Reporting any threats to the health and safety of persons or potential for damage to Government property or critical national infrastructure which may result from the Contractor's performance or failure to perform the contract's requirements. (End of clause) G.5200.242.003 SUBMISSION OF INVOICES (JUL 2015) "SUBMISSION OF INVOICES" (a) Background: The Transportation Security Administration (TSA) partners with the United States Coast Guard Finance Center for financial services in support of TSA operations, including the payment of contractor invoices. Therefore, all contractor invoices must be submitted to, and will be paid by, the U.S. Coast Guard Finance Center (FinCen). (b) Invoice Submission Method: Invoices may be submitted via facsimile, U.S. Mail, or email. Contractors shall utilize ONLY ONE method per invoice submission. The submission information for each of the methods is as follows in order of preference: 1) Facsimile number is: 757-413-7314 The facsimile number listed above shall be used by contractors for ORIGINAL invoice submission only. If facsimile submission is utilized, contractors shall not submit hard copies of invoices via the U.S. mail. It is the responsibility of the contractor to verify that invoices are received, regardless of the method of submission used. Contractors may inquire regarding the receipt of invoices by contacting the U.S. Coast Guard Finance Center via the methods listed in subparagraph (d) of this clause. 2) U.S. Mail: United States Coast Guard Finance Center TSA Commercial Invoices P.O. Box 4111 Chesapeake, VA 23327-4111 (FIN-SMB-TSAInvoices@uscg.mil or www.fincen.uscg.mil ) (c) Invoice Process: Upon receipt of contractor invoices, FinCen will electronically route invoices to the appropriate TSA Contracting Officer's Representative and/or Contracting Officer for review and approval. Upon approval, the TSA will electronically route the invoices back to FinCen. Upon receipt of certified invoices from an Authorized Certifying Official, FinCen will initiate payment of the invoices. Note for discounts offered: Discounts on invoices. If desired, the Contractor should offer discounts directly upon the invoice submitted, clearly specifying the terms of the discount. Contractors can structure discounted amounts for payment for any time period less than the usual thirty-day payment period specified under Prompt Payment requirements; however, the Contractor should not structure terms for payment of net amounts invoiced any sooner than the standard period required under FAR Subpart 32.9 regarding prompt payments for the specified deliverables under contract. Discounts offered after invoice submission. If the Contractor should wish to offer a discount on a specific invoice after its submission for payment, the Contractor should submit a letter to the Finance Center identifying the specific invoice for which a discount is offered and specify the exact terms of the discount offered and what time period the Government should make payment by in order to receive the discount. The Contractor should clearly indicate the contract number, invoice number and date, and the specific terms of the discount offered. Contractors should not structure terms for net amount payments any sooner than the standard period required under FAR Subpart 32.9 regarding prompt payments for the specified deliverables under contract. (d) Payment Status: Contractors may inquire on the payment status of an invoice by any of the following means: (1) Via the internet: https://www.fincen.uscg.mil Contacting the FinCen Customer Service Section via telephone at 1-800-564-5504 or (757) 523-6940 (Voice Option #1). The hours of operation for the Customer Service line are 8:00 AM to 5:00 PM Eastern Time, Monday through Friday. However, the Customer Service line has a voice-mail feature that is available 24 hours per day, 7 days per week. (2) Via the Payment Inquiry Form: https://www.fincen.uscg.mil/secure/payment.htm (e) Invoice Elements: Invoices will automatically be rejected if the information required in subparagraph (a)(2) of the Prompt Payment Clause, contained in this Section of the Contract, including EFT banking information, Taxpayer Identification Number (TIN), and DUNS number are not included in the invoice. All invoices must clearly correlate invoiced amounts to the corresponding contract line item number and funding citation. The Contractor shall work with the Government to mutually refine the format, content and method of delivery for all invoice submissions during the performance of the Contract. (f) Supplemental Invoice Documentation: Contractors shall submit all supplemental invoice documentation (e.g. copies of subcontractor invoices, travel vouchers, etc.) necessary to approve an invoice along with the original invoice. The Contractor invoice must contain the information stated in the Prompt Payment Clause in order to be received and processed by FinCen. Supplemental invoice documentation required for review and approval of invoices may, at the written direction of the Contracting Officer, be submitted directly to either the Contracting Officer, or the Contracting Officer's Representative. Note for "time-and-material" type contracts: The Contractor must submit the following statement with each invoice for labor hours invoiced under a "time-and-materials" type contract, order, or contract line item: "The Contractor hereby certifies in accordance with paragraph (c) of FAR 52.232-7, that each labor hour has been performed by an employee (prime or subcontractor) who meets the contract's specified requirements for the labor category invoiced." (g) Additional Invoice Preparation Instructions for Software Development and/or Hardware. The Contractor shall clearly include a separate breakdown (by CLIN) for any software development activities (labor costs, subcontractor costs, etc.) in accordance with Federal Accounting Standards Advisory Board Statement of Federal Financial Accounting Standards Number 10 (Preliminary design costs, Development costs and post implementation costs) and cite payment terms. The contractor shall provide make and model descriptions as well as serial numbers for purchases of hardware and software (where applicable.) (h) Frequency of Invoice Submission. Invoices shall be submitted after the acceptance of each delivery order. (End of clause) G. 5200.243.001 CONTRACTING OFFICER (CO) (JUL 2015) The Contracting Officer is the only person authorized to make any changes, approve any changes in the requirements of this contract, issue orders, obligate funds and authorize the expenditure of funds, and notwithstanding any term contained elsewhere in this contract, such authority remains vested solely in the Contracting Officer. (For further information, the Contracting Officer is a federal government employee who is specifically authorized and appointed in writing under specified agency procedures and granted the authority to enter into, administer, and/or terminate contracts and make related determinations and findings.) In the event, the Contractor makes any changes at the direction of any person other than the Contracting Officer, the change will be considered to have been without authority and no adjustment will be made in the contract price to cover any increase in costs incurred as a result thereof. The following Primary Contracting Officer is assigned to this contract. Alternate Contracting Officers may be assigned: TSA Contracting Officer: NAME: Stacey Santhuff PHONE NUMBER: 202-360-7929 EMAIL: Stacey.Santhuff@tsa.dhs.gov (End of clause) H.5200.204.001 MAJOR BREACH OF SAFETY OR SECURITY (DEC 2015) (a) Safety is the freedom from those conditions that can cause death, injury, occupational illness, damage to or loss of equipment or property, or damage to the environment. Safety is essential to TSA and compliance with safety standards and practices is a material part of this contract. A major breach of safety may constitute a breach of contract that entitles the Government to exercise any of its rights and remedies applicable to material parts of this agreement, including termination for default. A major breach of safety must be related directly to the work on the agreement. A major breach of safety is an act or omission of the Contractor that consists of an accident, incident, or exposure resulting in a fatality, serious injury, or mission failure; or in damage to equipment or property equal to or greater than $1 million; or in any "willful" or "repeat" violation cited by the Occupational Safety and Health Administration (OSHA) or by a state agency operating under an OSHA approved plan. (b) Security is the condition of safeguarding against espionage, sabotage, crime (including computer crime), or attack. A major breach of security may constitute a breach of contract that entitles the Government to exercise any of its rights and remedies applicable to material parts of this agreement, including termination for default. A major breach of security may occur on or off Government installations, but must be related directly to the work on the agreement. A major breach of security is an act or omission by the Contractor that results in compromise of classified information or sensitive security information or sensitive but unclassified information, including contractor proprietary information, illegal technology transfer, workplace violence resulting in criminal conviction, sabotage, compromise or denial of information technology services, equipment or property damage from vandalism greater than $250,000, or theft greater than $250,000. NOTE: Breach of Security for the purposes of this definition should not be confused with breach of security in screening operations. (c) In the event of a major breach of safety or security, the Contractor shall report the breach to the Contracting Officer. If directed by the Contracting Officer, the Contractor shall conduct its own investigation and report the results to the Government. The Contractor shall cooperate with the Government investigation, if conducted. (End of clause) H.5200.212.001 COMMERCIAL APPLICABILITY (JUL 2015) This contract 1is/0is not (CO shall select) for commercial item, as defined by FAR 2.1. (End of clause) H.5200.224.001 DISCLOSURE OF INFORMATION (JUL 2015) Information furnished by the Contractor under this contract may be subject to disclosure under the Freedom of Information Act (FOIA). Therefore, all items that are confidential to business, or contain trade secrets, proprietary, or personally-identifiable information must be clearly marked. Any information made available to the Contractor by the Government must be used only for the purpose of carrying out the requirements of this contract and must not be divulged or made known in any manner to any person except as may be necessary in the performance of the contract. In performance of this contract, the Contractor assumes responsibility for protection of the confidentiality of Government records and information and must ensure that all work performed by its Subcontractor(s) shall be under the supervision of the Contractor or the Contractor's employees. (End of clause) L. 5200.233.001 AVAILABILITY OF INTERNAL APPEAL PROCESS PER FAR 33.103 (JUNE 2017) In the event of receipt of the Contracting Officer's final decision of an agency-level protest in accordance with Federal Acquisition Regulation 33.103, the offeror is hereby advised that an appeal process is available from within the agency. The Assistant Administrator of the Office of Contracting and Procurement in the Transportation Security Administration is the independent appeal authority. All appeals must be submitted in writing and signed by a company official who is authorized to commit the company and contain the same elements required in FAR 33.103(d) as well as an explanation of the Contracting Officer's decision (and copy of such decision). Appeals must be sent either in writing or via email to Transportation Security Administration, ATTN: APPEAL OF AGENCY PROTEST, Office of Contracting and Procurement, 601 S. 12th Street, Arlington, VA 20598-6025 , or via email to TSAProcurementPolicy@tsa.dhs.gov. The subject line for the email should clearly indicate "APPEAL OF AGENCY PROTEST". (End of provision) 4.0 Contract Clauses HSAR 3052.212-70 Contract Terms and Conditions Applicable to DHS Acquisition of Commercial Items. (SEP 2012) The Contractor agrees to comply with any provision or clause that is incorporated herein by reference to implement agency policy applicable to acquisition of commercial items or components. The provision or clause in effect based on the applicable regulation cited on the date the solicitation is issued applies unless otherwise stated herein. The following provisions and clauses are incorporated by reference: (a) Provisions None (b) Clauses. 3052.203-70 Instructions for Contractor Disclosure of Violations. 3052.205-70 Advertisement, Publicizing Awards, and Releases. 3052.242-72 Contracting Officer's Technical Representative. 3052.247-72 F.o.B. Destination Only. 3052.209-70 Prohibition on contracts with corporate expatriates (JUN 2006) (a) Prohibitions. Section 835 of the Homeland Security Act, 6 U.S.C. 395, prohibits the Department of Homeland Security from entering into any contract with a foreign incorporated entity which is treated as an inverted domestic corporation as defined in this clause, or with any subsidiary of such an entity. The Secretary shall waive the prohibition with respect to any specific contract if the Secretary determines that the waiver is required in the interest of national security. (b) Definitions. As used in this clause: Expanded Affiliated Group means an affiliated group as defined in section 1504(a) of the Internal Revenue Code of 1986 (without regard to section 1504(b) of such Code), except that section 1504 of such Code shall be applied by substituting `more than 50 percent' for `at least 80 percent' each place it appears. Foreign Incorporated Entity means any entity which is, or but for subsection (b) of section 835 of the Homeland Security Act, 6 U.S.C. 395, would be, treated as a foreign corporation for purposes of the Internal Revenue Code of 1986. Inverted Domestic Corporation. A foreign incorporated entity shall be treated as an inverted domestic corporation if, pursuant to a plan (or a series of related transactions)- (1) The entity completes the direct or indirect acquisition of substantially all of the properties held directly or indirectly by a domestic corporation or substantially all of the properties constituting a trade or business of a domestic partnership; (2) After the acquisition at least 80 percent of the stock (by vote or value) of the entity is held- (i) In the case of an acquisition with respect to a domestic corporation, by former shareholders of the domestic corporation by reason of holding stock in the domestic corporation; or (ii) In the case of an acquisition with respect to a domestic partnership, by former partners of the domestic partnership by reason of holding a capital or profits interest in the domestic partnership; and (3) The expanded affiliated group which after the acquisition includes the entity does not have substantial business activities in the foreign country in which or under the law of which the entity is created or organized when compared to the total business activities of such expanded affiliated group. Person, domestic, and foreign have the meanings given such terms by paragraphs (1), (4), and (5) of section 7701(a) of the Internal Revenue Code of 1986, respectively. (c) Special rules. The following definitions and special rules shall apply when determining whether a foreign incorporated entity should be treated as an inverted domestic corporation. (1) Certain stock disregarded. For the purpose of treating a foreign incorporated entity as an inverted domestic corporation these shall not be taken into account in determining ownership: (i) Stock held by members of the expanded affiliated group which includes the foreign incorporated entity; or (ii) Stock of such entity which is sold in a public offering related to an acquisition described in section 835(b)(1) of the Homeland Security Act, 6 U.S.C. 395(b)(1). (2) Plan deemed in certain cases. If a foreign incorporated entity acquires directly or indirectly substantially all of the properties of a domestic corporation or partnership during the 4-year period beginning on the date which is 2 years before the ownership requirements of subsection (b)(2) are met, such actions shall be treated as pursuant to a plan. (3) Certain transfers disregarded. The transfer of properties or liabilities (including by contribution or distribution) shall be disregarded if such transfers are part of a plan a principal purpose of which is to avoid the purposes of this section. (d) Special rule for related partnerships. For purposes of applying section 835(b) of the Homeland Security Act, 6 U.S.C. 395(b) to the acquisition of a domestic partnership, except as provided in regulations, all domestic partnerships which are under common control (within the meaning of section 482 of the Internal Revenue Code of 1986) shall be treated as a partnership. (e) Treatment of Certain Rights. (1) Certain rights shall be treated as stocks to the extent necessary to reflect the present value of all equitable interest's incident to the transaction, as follows: (i) warrants; (ii) options; (iii) contracts to acquire stock; (iv) convertible debt instruments; and (v) others similar interests. (2) Rights labeled as stocks shall not be treated as stocks whenever it is deemed appropriate to do so to reflect the present value of the transaction or to disregard transactions whose recognition would defeat the purpose of Section 835. (f) Disclosure. The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.108-7001 through 3009.108-7003; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.108-7001 through 3009.108-7003, but it has submitted a request for waiver pursuant to 3009.108-7004, which has not been denied; or __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.108-7001 through 3009.108-7003, but it plans to submit a request for waiver pursuant to 3009.108-7004. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal. (End of clause) FAR 52.252-2 Clauses Incorporated by Reference (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): www.aquisition.gov/far FAR 52.212-4 Contract Terms and Conditions - Commercial Items (JAN 2018) FAR 52.247-34 F.o.b. Destination. (NOV 1991) FAR 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items. (JAN 2018) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). (3) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553). (4) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004)(Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: _X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 20...

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:70T05018Q9NFDO041
  1. Combined Synopsis
  1. 2×
    Combined SynopsisCurrentJul 10, 2018

    Simulator Seats

    Notice 05308ec09f920e8fd632f80c18c3a8fa on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Proposed procurement for NSN 1680014826938 VALVE,DEFUEL,AIRCRA: Line 0001 Qty 14 UI EA Deliver To: DLA DISTRIBUTION CHERRY POINT By: 0158 DAYS ADO This is a source controlled drawing item. Approved sources are 91816 RV99-293; 97499 901-366-326-101. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. The items furnished must meet the requirements of the drawing cited in the solicitation. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/19/2026
Proposed procurement for NSN 1680016825116 MATTRESS,AIRCRAFT: Line 0001 Qty 9 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0125 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/19/2026
Proposed procurement for NSN 1680006007285 LEVER,REMOTE CONTROL: Line 0001 Qty 35 UI EA Deliver To: DLA DISTRIBUTION DEPOT HILL By: 0170 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/19/2026
Proposed procurement for NSN 1615009389754 BRACKET,SUPPORT: Line 0001 Qty 4 UI EA Deliver To: DLA DISTRIBUTION SAN DIEGO By: 0151 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/19/2026
Proposed procurement for NSN 1680015274555 PARTICLE SEPARATOR,: Line 0001 Qty 4 UI EA Deliver To: DLA DISTRIBUTION JACKSONVILLE By: 0559 DAYS ADO This is a source controlled drawing item. Approved sources are 18265 S7080-06001-111; 78286 S7080-06001-111. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. The items furnished must meet the requirements of the drawing cited in the solicitation. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.
-Combined Synopsis11/18/2026

Additional Details

Solicitation Number

70T05018Q9NFDO041

Archive Date

Apr 2, 2019

Office Address

Springfield, VA, 20598