Notice ID: 3e262e127175416eb00d74416a8fff7dSolicitation
Forensics Document Examiner
Archived on October 1, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM UTC−04:00
- Posted
- September 5, 2023
- Notice type
- Solicitation
- NAICS
- 541990: All Other Professional, Scientific, and Technical Services
- Agency
- Department of Homeland SecurityUS SECRET SERVICE
Notice details
- Office
- U.S.SECRET SERVICE
- Place of performance
- Washington, DC, 20223
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- 70US0923R70093579
- Notice ID
- 3e262e127175416eb00d74416a8fff7d
Description
The purpose of this procurement is to obtain one (1) Document Analyst for quality forensic document examination support services. The contractor (Forensic Document Examiner) must possess experience with scientific examinations, comparisons, and analyses of documents to establish genuineness, expose forgery, or to reveal alterations, additions, or deletions. The analyst must have experience identifying or eliminating persons as the source of handwriting or relative evidence and writing reports or give testimony to aid the users of the examiners services in understanding the examiners findings. Finally, the analyst must be able to conduct scientific examinations of handwriting, signatures, and alterations. The analyst must be able to assess individualizing characteristics of handwriting and signatures to compare characteristics with known and unknown specimens. The analyst must be qualified to write reports for use by the judiciary, administrative and executive officers, law enforcement agencies, boards, commissions, lawyers, and individuals. Please see attached Solicitation letter for all information on how to propose. Questions due no later than 09/07/2023 at 12pm. Please see revised attachements 1,5,6. To answer the vendor question regarding indemnification the governments reponse is the government shall not indemnify the document analysts. Quotes due 09/13/2023 at 5PM EST. This effort is related to the Presolicitation notice that was published on July 26, 2023 RFP 70US0923R70093579. This effort is a remote position.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
70US0923R70093579- Pre-Solicitation
- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- 2×Pre-SolicitationJul 26, 2023
Forensics Document Examiner
- SolicitationSep 1, 2023
Forensics Document Examiner
- Pre-SolicitationSep 1, 2023
Forensics Document Examiner
- 3×SolicitationCurrentSep 1, 2023
Forensics Document Examiner
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. This RFI is issued solely for information and market research planning purposes. This RFI shall not be construed as an obligation on the part of the Government. This is NOT a Request for Quotations or Proposals. No solicitation document exists, and the Government may or may not issue a formal solicitation as a result of the responses received to this RFI. The Government will not pay for any response or demonstration expenses. All costs incurred responding to this RFI will be solely at the interested party's expense. Failure to respond to this RFI will not preclude participation in any future solicitation. Any information received will become the property of the Government and will not be returned to the submitter. Interested parties are responsible for adequately marking proprietary or sensitive information. The Government’s explicit intent, in this RFI , is to not receive from respondents any proprietary data, trade secrets, business sensitive information, or information considered CONFIDENTIAL under 18 U.S.C. §1905. The Government’s constraint does not in any way relieve interested parties from their responsibility to properly mark proprietary data when it is provided, nor does it alleviate any requirement for the Government to protect marked data. The Government is not obligated to protect unmarked data. The information provided in this RFI is subject to change and is not binding on the Government. All submissions become the property of the Federal Government and will not be returned. Important Notice: Please read attached document for complete instructions on how to respond to this RFI. Interested parties can request a copy of the DRAFT Statement of Work for this requirement by emailing the point of contacts listed below. | - | Special Notice | 11/13/2026 |
THIS IS A REQUEST FOR INFORMATION (RFI) ONLY. This RFI is for planning purposes only and shall not be construed as an obligation on the part of the Government. This is NOT a Request for Quotations or Proposals. No solicitation document exists, and a formal solicitation may or may not be issued by the Government as a result of the responses received to this RFI. The Government will not pay for any response or demonstration expenses. Interested parties are responsible for adequately marking proprietary or competition sensitive information contained in their response. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Those who respond to this RFI should not anticipate feedback concerning their submission. All submissions will become the property of the Government and will not be returned. Responding to the RFI is completely voluntary and will not enhance or adversely affect responses to any resulting solicitation if such solicitation is issued at a later date. There is no competitive advantage gained by any of the respondents to this RFI. DESCRIPTION The Office of Biometric Identity Management (OBIM) is the Congressionally designated lead entity within the Department of Homeland Security (DHS), responsible for biometric identity services. The capability to match, store, share, and analyze biometric identity information includes OBIM’s operation, maintenance, and improvement of the central DHS biometric repository which is currently the Automated Biometric Identification System (IDENT), and in the future the in-development replacement system for IDENT, Homeland Advanced Recognition Technology (HART). OBIM provides DHS and its mission partners with biometric identity services that enable national security and public safety decision making. As one of the world’s largest biometric repositories, OBIM’s biometric system contains the identities of over 300 million individuals. OBIM Identity Operations Division (IOD) is seeking professional services to provide biometric examiners, multimodal biometric examiners and identity services to support OBIM with multimodal biometric accuracy and identity services expertise for the Biometric Accuracy Analysis Team (BAAT) and Biometric Support Center (BSC), to support OBIM’s current and future biometric capabilities. OBIM’s biometric system currently utilizes fingerprints, latent prints, face, and iris to support its biometric mission needs but expects the capabilities to expand to meet stakeholder needs in the future. The contractor shall provide multimodal biometric accuracy and identity services expertise to include: • Biometric examination services • Identity management capabilities and biometric support services • Biometric accuracy and quality analysis • Data analysis Government provided software will be used in support of this work effort. Software used may change during the course of the contract; however, the type of work will remain the same. The contractor shall provide multimodal biometric accuracy and identity services expertise to include: Biometric examination services for all modalities Identity management capabilities and biometric support services Biometric accuracy and quality analysis Data analysis In addition, as part of this effort, the Government expects: Innovative approaches to staffing in order to ensure resources are applied in the most efficient manner Application of industry best practices across all tasks Collaboration across BAAT and BSC teams to ensure mission needs are met and opportunities for efficiency improvements are identified The contractor is responsible for providing oversight of the work performed in accordance with the Project Management Plan and for establishing/maintaining a Quality Assurance program. Biometric Examiner and Identity Management Services Although OBIM’s biometric system is very accurate and executes hundreds of thousands of biometric services each day, BSC biometric examiners and analysts are needed to supplement the automated capabilities of the system, respond to stakeholder requests for biometrics identity services, and to maintain and improve the accuracy of the system through identity management tasks and in support of the BAAT accuracy activities. The contractor shall provide qualified personnel to support the Biometric Support Center (BSC) with the following duties: Analyze and compare biometric images to render identity decisions when the automated matchers are unable Resolve candidate lists generated by the automated system when biometrics are searched Prepare reports as needed to support examiner identity decision conclusions Correct biometric capture issues so that future matching is improved Maintain the identities within IDENT/HART through record reviews and analysis of biometric identity conflicts, errors, etc. Support stakeholder biometric service requests for those stakeholders who are not able to execute these requests through automated capabilities Provide subject matter expertise and technical support in support of BSC operations Note: The BSC is not a forensic laboratory; therefore, the scope of this work does not include the handling/processing of physical evidence. Biometric Accuracy and Data Analysis Additionally, the contractor shall provide data accuracy and quality analysis to manage the accuracy of biometric identity information. The government is expecting support for the Biometric Accuracy Analysis Team (BAAT) which is dedicated to the monitoring, analysis, reporting, and correction of the biometric data within the HART database. The contractor is responsible for providing data integrity analysis, reporting services and related analysis services, as required, for OBIM’s IOD. Support includes technical subject matter expertise, project management services as well as audit recommendations and advice on corrective actions and guidance to the field. The contractor shall also provide statistical analysis of system data to support requirements identification. The contractor shall provide qualified personnel to support the Biometric Accuracy Analysis Team (BAAT) with the following duties: Conducting comprehensive testing of biometric data to assess accuracy and quality of stakeholder biometric data, vendor matchers, presentation attack detection tools, and data quality software Supporting the development, implementation and automation of biometric programs Collaborate within OBIM and with stakeholders to ensure alignment with operational goals and standards to improve biometric match response accuracy Create statistically representative biometric data cohorts as authorized to support mission needs Perform ad hoc root-cause-analysis of biometric based anomalies. Enhance existing processes, infrastructure, and architecture to better support operations Support the maintenance and production of Microsoft Power Platform based applications Ensure adherence to record keeping protocols by leveraging existing methods and applying authorized process improvements methods Publish impactful findings to support best practices throughout OBIM and its stakeholders Attend conferences and meetings related to biometric knowledge sharing to support OBIM Establish metrics to enable a notification-based dashboard to support system monitoring Task Order Management The government expects: The establishment and maintenance of a roadmap that aligns the efforts of the BSC and BAAT with the broader Systems Business Operations Branch. The design, development, and integration of Microsoft Power Platform solutions, existing Excel reports, and the Pyramid Business Intelligence application to seamlessly dashboard key performance metrics. Routine coordination and planning between Key Personnel; Biometric Examiner Lead and Biometric Information Technology/Identification Systems Specialist to establish seamless methods of documenting, tracking, reporting, and supporting contractor activity. Ensure biometric examiner contractors are present and capable to sufficiently support specific BSC operations 24/7/365. INDUSTRY DISCUSSIONS DHS representatives may or may not choose to meet with potential offerors. Such discussions would only be intended to get further clarification of potential capability to meet the requirements. REQUEST FOR INFORMATION RESPONSE DHS is asking respondents to submit a Capability Statement responsive to the requirements described within Attachment I - SOW - Biometric Identity Services - Draft. DHS appreciates responses from all capable and qualified sources. Responders are requested to describe in clear and concise language their company's capabilities to meet the requirements of this RFI. Capabilities statements shall not exceed ten (10) pages and general formatting shall be done using single-spaced 12-point font on letter sized (8.5 x 11) pages and submitted as a pdf or Word document. Each response shall contain a Cover Page identifying: RFI Title Name and Address of Company Point of Contact (Name, Title, Email, and Phone) Website Address Business size and Type of Ownership (i.e. 8A, Other than Small, Small, Small Disadvantaged, Woman-owned, Hub-zone, Service-Disabled Veteran, etc.) Contract Vehicle and Contract Number where services are available. i.e. GSA MAS Schedule, GSA Alliant 2, GSA Alliant 3, NASA SEWP, GSA OASIS+, etc. Also, include the applicable North America Industry Classification System (NAICS) code. The Government is considering NAICS Code 541990 Company overview Commercial or non-Commercial Service Description of the products or services a company provides Statement and assurance about what the client can expect from your company Each response shall include a Capability Statement discussing the company’s capabilities to meet the requirements described within attached draft Statement of Work and provide an answer to questions below: 1. Describe your organization’s experience providing biometric examination, identity-management, and biometric data-quality services in large-scale, mission-critical environments. 2. Identify the biometric modalities for which your organization currently provides qualified examiner services, including fingerprint, latent print, face, iris, and any additional modalities. 3. Describe your experience supporting biometric operations that require continuous or 24/7/365 coverage, time-sensitive adjudications, and strict service-level agreements. 4. Describe your ability to recruit, retain, and deploy qualified biometric examiners who meet the SOW’s minimum experience requirements, including latent print examiners and personnel qualified in multiple modalities. 5. What is the current availability of personnel with: Fingerprint comparison experience Latent print examination experience Facial-comparison experience Iris-comparison experience Multimodal biometric examination experience Biometric identity-management and record-resolution experience 6. Describe the certifications, training programs, proficiency testing, and continuing education your organization uses to maintain examiner qualifications 7. Describe your approach for cross-training examiners across fingerprint, face, iris, and identity-management activities while ensuring personnel only perform functions for which they are qualified. 8. What efficiencies in examiner operations can you recommend? 9. Describe your approach to managing a combined operational and analytical workforce supporting both BSC and BAAT functions. 10. Describe your organization’s experience conducting biometric accuracy testing, matcher evaluations, threshold analysis, statistically representative cohort development, and biometric-data-quality analysis. 11. Describe your capabilities and experience with the analytical, data, and technical environment referenced in the SOW, including Python, R, SQL, Oracle, PostgreSQL, AWS GovCloud, Security-Enhanced Red Hat Enterprise Linux, GitLab, Jira, Confluence, and Pyramid Analytics. 12. Describe your experience designing and maintaining dashboards, data visualizations, automated reports, root-cause analyses, and notification-based monitoring capabilities. 13. Describe your experience developing and sustaining Microsoft Power Platform solutions, including Power Apps, Power Automate, Microsoft Lists, Excel-based workflows, dashboard integrations, and CSV exports to business-intelligence tools. 14. Describe your organization’s experience conducting biometric accuracy testing, matcher evaluations, threshold analysis, statistically representative cohort development, and biometric-data-quality analysis. 15. Describe your capabilities and experience with the analytical, data, and technical environment referenced in the SOW, including Python, R, SQL, Oracle, PostgreSQL, AWS GovCloud, Security-Enhanced Red Hat Enterprise Linux, GitLab, Jira, Confluence, and Pyramid Analytics. 16. Describe your experience designing and maintaining dashboards, data visualizations, automated reports, root-cause analyses, and notification-based monitoring capabilities. 17. Describe your experience developing and sustaining Microsoft Power Platform solutions, including Power Apps, Power Automate, Microsoft Lists, Excel-based workflows, dashboard integrations, and CSV exports to business-intelligence tools. Response due date: no later than Monday, October 26, 2026, at 10:00 AM Eastern Time. Responses to vendor questions may or may not be provided. If the Government answers any vendor questions, all questions and answers will be published via an amendment to this RFI on SAM.gov. Vendor names will not be identified in the amendment. NOTE: This RFI is issued in accordance with Revolutionary FAR Overhaul (RFO) 10.001(c) for market research exchanges with industry. All interested parties, including small businesses, are encouraged to respond. This RFI seeks information only. It is not a request for proposals, a solicitation under GSAR Subpart 538.71, or an obligation to buy. No contract award will result from responses. The Government will not pay for any information or materials submitted. Responses are not offers and cannot form a binding contract if accepted. All responses become Government property and will not be returned. Proprietary information will be handled in accordance with RFO FAR 24.202 and the Freedom of Information Act (5 U.S.C. § 552); mark clearly to request protection. This RFI is posted on www.SAM.gov. Please, submit your response to the POCs listed on this RFI. | - | Market Research | 10/26/2026 |
This amendment only impacts submissions submitted after 6 November. All submissions should be submitted to the Golden Dome Ecosystem Hub at https://hub.goldendome.mil/gateway/ Two distinct submission tracks.Track 1: Optional Pre-Screening via Two-Page Technical Executive Summary (Strongly Encouraged, Not Mandatory) and Track 2: Direct Submission of White Paper. You do not need to resubmit your White Paper, however please ensure your company is registered in the GDA HUB. Office of the Secretary of War, Golden Dome for America (GDA) Commercial Solutions Opening (CSO) HQ0202-26-S-0001 for GDA Technology Development, Deployment and Program Support Commercial Solutions Opening (CSO) Summary HQ0202-26-S-0001 P0001 Title: GDA Technology Development, Deployment and Program Support Open Period: Initiation to 30 September 2035 Opportunity Description: The United States homeland faces increasing risk and remains relatively undefended against a new generation of advanced weapons actively being developed by adversaries. GDA’s core mission is to rapidly field defenses that protect Americans and critical infrastructure from this real, complex, and growing threat. These threats include sophisticated ballistic missiles, hypersonic weapons, advanced cruise missiles, and other modern aerial systems. To achieve this unprecedented mission within a compressed timeline, GDA will operate as an agile organization with a mandate to leverage commercial innovation. Rapid and flexible contracting approaches will accelerate the adoption of critical technologies, unconstrained by legacy policy and regulatory limitations. This CSO enables GDA to identify and select vendors whose solutions demonstrate the greatest potential to advance the GDA mission. Submissions will be evaluated through a merit‑based peer review, technical review, or operational review process consistent with 10 U.S.C. § 3458. Under this CSO, GDA has Other Transaction (OT) Authority to partner with nontraditional defense contractors (NDC) and non‑profit research institutions, as well as traditional defense contractors to execute prototype projects directly relevant to enhancing the mission effectiveness of military personnel and the platforms, systems, components, or materials to be acquired or developed by the Department of War. This includes improvements to platforms, systems, components, or materials currently in use by the Armed Forces for GDA’s mission. GDA may also utilize FAR‑based procurement methods for acquiring services. This CSO serves as a competitive mechanism for awarding OT prototype agreements, follow‑on prototype or production agreements, or FAR‑based contracts. The determination of whether an award will be executed as an OT agreement or a FAR‑based contract rests solely with the Government. POINT OF CONTACT: All questions and submissions related to this CSO shall only be sent via e-mail to: osd.pentagon.ousd-r-e.mbx.gda-contracting@mail.mil | - | Solicitation | 04/01/2031 |
This is a Draft Request for Quotation (RFQ) for The National Performance Management Research Data Set (NPMRDS) and Technical and Data-Sharing Support. Please read the draft RFQ carefully and thoroughly. Questions (Q&A) about this draft RFQ must be emailed and received by Agency POC's no later than 12:00 NOON ET Friday, November 6, 2026. Please see attached draft RFQ for Q&A submission instructions. Any questions submitted via SAM.gov will not be considered or answered. Thank you. | - | Pre-Solicitation | 11/06/2026 |
SUBJECT: Request for Information (RFI) for non-personal services to support the Solutions for Intelligence Analysis 4 (SIA 4) Indefinite Delivery Indefinite Quantity (IDIQ) 1. INTRODUCTION It is the Virginia Contracting Activity’s (VaCA’s) policy to foster productive exchanges of information between the Government and vendors before issuing requests for proposals (RFPs). This is a Request for Information (RFI) only. This is not a solicitation or RFP. The Government will not award any contracts based solely on this RFI, nor will the Government pay for any costs incurred in responding to this announcement. No RFP currently exists; therefore, please do not request a copy of the RFP. Due to the intelligence nature of the anticipated requirements, the Solutions for Intelligence Analysis 4 (SIA 4) procurement will be classified. Following the conclusion of this RFI, anticipate all future SIA 4 procurement actions will be released through the National Reconnaissance Office (NRO) Acquisition Resource Center (ARC). The Government anticipates that all vendor proposals will be classified. Vendors desiring to participate in this procurement should prepare now to ensure they have the required access and ability to respond. As part of its market research, VaCA is issuing this RFI to determine if an adequate number of qualified interested vendors exists with the requisite experience and skill sets required to provide intelligence analysis and analytics supporting professional services. Given the complexity and technical nature of Defense Intelligence Enterprise (DIE) requirements, high levels of analytical intelligence expertise, tradecraft, and mission area knowledge are essential to providing the most accurate and highest quality intelligence support possible. In addition to identifying potential sources, vendor input is sought to clarify commercial industry terminology and approach. Responses to this RFI will be assessed for the purpose of market research, information and planning purposes only. As such, industry responses will not be treated as proposals. The Government further reserves the right to terminate this request and change its requirements if needed. Responding to this RFI does not guarantee participation in future Government activities. Responses to this RFI are not considered offers and cannot be accepted by the Government to form binding contracts. Response to this RFI is not mandatory for participation in the SIA 4 solicitation. Vendors should be advised that all submissions become Government property. Responses to this RFI will not be returned. 2. PURPOSE This document serves as the RFI of the VaCA vendor community pursuant to RFO 15.101 “Early exchanges with industry.” VaCA is conducting preliminary planning and market research to enable design and release of an SIA 4 RFP. VaCA is issuing this RFI to open the announcement and early participation to the full market so that all high-potential sources of support can be identified across industry. The goal is to identify the portion of the market that can provide the best competition for the SIA 4 follow-on contract, including both established providers and new entrants with relevant capabilities. As this will be a classified procurement, it is the responsibility of the interested parties to monitor the NRO ARC for updates and to prepare now to ensure they have the access and ability to respond through secure channels subsequent to this RFI. Responses to this RFI will be assessed to identify sources that are considered best qualified to meet future requirements. Best qualified sources are those sources which demonstrate the greatest depth and breadth of skills, experiences, and knowledge relevant to the mission, goals, and objectives of the VaCA. 3. BACKGROUND As a follow-on to the current SIA 4 contract vehicle, SIA 4 is planned to be a non-personal services contract for intelligence analytics support to the VaCA and the DIE. Services are anticipated both in CONUS and OCONUS. In some cases, OCONUS services will subject personnel to harsh and hostile conditions in environments designated by the U.S. Government as Imminent Danger and / or Hostile Fire Zones. 4. ANTICIPATED SCOPE OF WORK Once solicitated, the Government intends to award prime contracts to multiple companies, including small businesses. It is the policy of the Government to provide maximum practicable opportunities in its procurements to small and disadvantaged businesses. To support future small business requirements, all prime contract awardees MUST include as part of their team at time of proposal submission small businesses representing the four primary set-aside categories – small disadvantaged business (SDB) (including 8(a)-certified SDB), woman owned small business (WOSB), service-disabled veteran owned small business (SDVOSB), and historically under-utilized business zone (HUBZONE). The planned period of performance (PoP) for the anticipated multiple award IDIQ contracts will be a five (5) year base ordering period with one optional five (5) year ordering period. Executed task orders (TOs) may have up to a one (1) year base period and up to four (4) option periods (no option period will exceed one (1) year in duration). The future SIA 4 vehicle is anticipated to include a Small Business On-Ramp and Small Business / Other than Small Business Off-Ramp provisions. To be considered for award under the anticipated multiple award IDIQ contracts, potential offerors will need to possess and maintain an active Top Secret (TS) level Facility Clearance (FCL) and be able to support work at the Top Secret // Sensitive Compartmented Information (TS//SCI) level. The anticipated multiple award IDIQ contracts will require all supporting contractor personnel to be U.S. citizens who possess and maintain an active TS clearance with SCI access and successful screening by counter-intelligence polygraph. Failure to meet these requirements by the time of the proposal submission will make the offeror ineligible for award. The North American Industry Classification System (NAICS) code for this contract is planned to be 541990: All Other Professional, Scientific, and Technical Services. Offerors submitting as a prime contractor must be registered in the System for Award Management (SAM) with NAICS code 541990 designated at time of proposal submission. Failure to register through SAM and designate this NAICS code by the time of proposal submission will make the offeror ineligible for award. Additionally, the Product Service Code will be R423: Support – Professional: Intelligence. 5. INFORMATION DESIRED Please address the following items in your response: A. Company name, mailing address, phone number, and email of designated primary and alternate points of contact. B. Company website address. C. Unique Entity Identifier (UEI) and Commercial and Government Entity (CAGE) code. D. Level of company facility clearance and company storage authorization. If your company has an active, approved Secure Compartmented Information Facility (SCIF), please provide the number of SCIFs, their location(s), and seating capacity. E. Business size and type (large business or small business including any applicable set-aside category (SDB, WOSB, SDVOSB, or HUBZONE) based upon NAICS code 541990 – All Other Professional, Scientific, and Technical Services. F. For the anticipated prime offeror, when was your company’s most recent DCAA audit? If not previously audited, does your company hold SF-1408 certification of your accounting system? When was the SF-1408 issued, and when was it most recently recertified? G. What quality assurance standard / methods do you think are best for management and surveillance of services provided through this type of procurement? What quality management certifications does your company hold? H. Are there general terms and conditions in Federal contracts that hamper your performance or creativity in bidding for an intelligence support services contract? If yes, briefly describe. I. What recommendations do you have for individual qualifications and skills requirements the Government should consider when designing the Labor Categories for the SIA 4 IDIQ? J. The Government is considering design of the SIA 4 solicitation that will focus heavily upon the offeror’s proven past performance rather than generic technical statements. The concept currently being considered follows the model used for the SIA 3 Small Business On-Ramp (HHM402-26-R-0003) that required up to 25 past performance citations, spread across the IDIQ’s Mission Task Areas and dispersed between the prime offeror and the offeror’s team. On-Ramp past performance citations were required to be not more than three years old, and a minimum of one year on contract was required to qualify. Additional weight was then applied to the dollar value of the contract. As the majority of Small Business On-Ramp offerors successfully cited all 25 requested past performances, for the SIA 3 solicitation, a requirement for as many as 30-35 past performance citations is being considered. Please provide your feedback on the usage of this model for the SIA 4 solicitation. Is it too restrictive? If additional qualifying factors should be applied, what do you recommend? K. Are there any operating locations that your company would not support? L. Please address the following specific topics / questions as applicable to your team. L.1. Innovation and Technology Development Focus L1.1. VaCA requests detailed recommendations on how the follow-on IDIQ and its TO structure can better encourage innovation and technology development without sacrificing mission delivery. Describe contract mechanisms, governance patterns, and delivery practices that have worked in comparable Government environments to accelerate capability upgrades. VaCA is especially interested in practical approaches for rapid technology insertion, secure prototyping, and evaluation (for example, use of test environments, sandboxes, or pilot TOs within accreditation constraints, and scalable transition from pilot to production. L.1.2. Responders should address what the Government can do, within standard Federal contracting constructs, to reduce barriers to innovation. Discuss what terms, conditions, or oversight patterns tend to inhibit experimentation, modernization, or tool adoption, and propose alternative approaches that still protect the Government’s interests. Where relevant, address data and interface considerations that support interoperability and avoid vendor lock-in, including recommendations for open architectures, modular delivery, documentation expectations, and sustainment pathways. L.1.3. Responders are also invited to describe how they incorporate emerging analytic techniques, methodologies, tools, and environments into day-to-day production, and how they institutionalize analytic tradecraft while integrating new technology. Provide concrete examples of how innovation was operationalized in prior programs, including what the Government asked for, what the contractor delivered, how value was measured, and what constraints (security, data access, accreditation, governance) had to be managed. L.2. Quality, Measurement, and Objective-Based Contracting (OBC) L.2.1. VaCA requests recommendations for OBC approaches suitable for intelligence analytic support. Describe how to define outcomes and acceptance criteria that are rigorous and auditable while still reflecting the realities on intelligence activities. Explain what success indicators and failure indicators should be used, how they should be measured and assessed, and what data or artifacts should be collected to support surveillance and continuous improvement. Include views on quality assurance (QA) methods that work well for this type of procurement and how QA should interact with tradecraft standards, mission prioritization, and surge requirements. L2.2. If responders used OBC or outcome-based performance structures in analytic or analytic-adjacent services, describe what worked, what did not, and what you would change if designing the contract from scratch. Include suggestions for performance incentives, including both monetary and non-monetary incentives, that effectively drive high-quality analytic outcomes and modernization behaviors rather than simply staffing levels. L.2.3. VaCA requests specific information on your recent experience delivering intelligence analysis or similar analytic support under Fixed Price (FP) arrangements, including Firm Fixed Price (FFP) or other FP constructs. Describe which work elements were successfully executed on FP, what assumptions were necessary to make FP workable, what the Government did to define scope and acceptance in a measurable way, and what risks required active management by both parties. L.2.4. If you believe intelligence analysis services can be acquired by FFP, describe how you would structure deliverables, objective measures, surge handling, and scope control to maintain mission responsiveness. If you believe certain analytic support elements are not suitable for FP, explain why and propose alternatives, including hybrid approaches within an IDIQ (for example, FP for well-defined products or recurring services, and other structures for inherently variable work). VaCA is also interested in how OBC can be paired with FP TOs to align contractor incentives with mission outcomes and modernization. M. Provide a brief overview of any teaming agreements or arrangements you intend to utilize if selected for the SIA 4 IDIQ. N. If there are additional items not covered above that you believe the Government needs to consider in developing SIA 4, please provide that information. 6. ANTICIPATED PROCUREMENT MILESTONES Should the Government decide to award IDIQ contracts, individual TOs would be subject to the availability of funding during the fiscal year in which each requirement is competed, beginning in FY29. 7. SUBMITTAL INSTRUCTIONS A. The Government will not entertain or respond to telephonic inquiries. Any RFI amendments will be published through the SAM.gov website. Responses to this RFI are due to the appropriate email address shown below NLT 5 P.M. Eastern, Tuesday, 24 November 2026. Responses are requested in PDF format and must not exceed ten (10) pages in length. Any information in excess of the page limit will not be considered. “Times New Roman” font is to be used in responses and will not be smaller than 12-point pitch, in standard and bold weights; no expanded, condensed, or reverse type should be used. Figures in tables, headers / footers, and graphic captions may use 10-point pitch. Sales brochures, videos, and other marketing information materials are not requested and will not be considered. Viable interested parties will demonstrate, in any response submitted, company capabilities to meet the performance objectives and the Government customers’ requirements. The SIA 4 solicitation is anticipated to be a team-based approach between the prime and subcontractors. Any information received in response to this RFI that is marked “Proprietary” will be protected and handled accordingly. Proprietary information, if any, should be minimized and MUST BE CLEARLY MARKED. Interested parties are responsible for adequately marking proprietary or competition sensitive information contained in their response. All responses / submissions become Government property and will not be returned. Responders are solely responsible for all expenses associated with responding to this RFI. The VaCA will not pay for information received in response to this RFI. B. The Government anticipates that the majority of responses to this RFI will be UNCLASSIFIED. All UNCLASSIFIED questions and responses are to be submitted to the SIA 4 PMO and Contracting team at sia3pmo@dodiis.mil and raqeeba.mohammed@dodiis.mil. Any CLASSIFIED questions and responses to this RFI will be submitted to sia3_pmo@coe.ic.gov and raqeeba.t.mohammed@coe.ic.gov. 8. INDUSTRY DAY The Government intends to conduct an Industry Day for the SIA 4 requirement during Q2FY27. Event details will be published to the NRO ARC. 9. POINTS OF CONTACT Contract Specialist: Ms. Raqeeba Mohammed 202.231.6067 raqeeba.mohammed@dodiis.mil or sia3pmo@dodiis.mil raqeeba.t.mohammed@coe.ic.gov or sia3_pmo@coe.ic.gov 10. SUMMARY THIS IS A REQUEST FOR INFORMATION (RFI) ONLY to identify sources that can provide intelligence analytic services. The information provided in the RFI is subject to change and is not binding on the Government. The VaCA has not made a commitment to procure any of the items discussed, and release of this RFI should not be construed as such a commitment or as authorization to incur costs for which reimbursement would be required or sought. All submissions become Government property and will not be returned. | - | Special Notice | 11/24/2026 |
Additional Details
Solicitation Number
70US0923R70093579
Archive Date
Oct 1, 2023
Office Address
WASHINGTON, DC, 20223