GovChime
Notice ID: 1c76268eab8d44738020fb93aaa23868Combined Synopsis/Solicitation

Metal Utility Shed

Archived on September 6, 2021. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:00 PM UTC−05:00
Posted
August 17, 2021
Notice type
Combined Synopsis/Solicitation
NAICS
238190: Other Foundation, Structure, and Building Exterior Contractors
Agency
Department of Homeland SecurityUS COAST GUARD

Notice details

Office
BASE NEW ORLEANS(00029)
Place of performance
Colfax, LA, 71417
Last updated
Dec 4, 2025

Identifiers

Solicitation number
70Z02921QPMW09800
Notice ID
1c76268eab8d44738020fb93aaa23868

Description

This is a combined synopsis/solicitation for non-commercial items prepared in accordance with the format in FAR Part 36 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and no other written solicitation will not be issued. Instructions to offerors, (FAR Part 36) evaluation criteria, and all applicable FAR Provisions and Clauses are attached. The solicitation number is 70Z02921QPMW09800. The solicitation document and incorporated provisions and clauses. Federal Acquisition Regulation (FAR) Clauses and Department of Labor Wage Rates for Construction are included in this order and are applicable. Where Federal Acquisition Regulation clause language is inconsistent with FAR Part 36, Legal Effect of Quotations, that language is hereby tailored in accordance with FAR Part 36 to be consistent with a request for quotations. This tailoring includes, but is not limited to the following: In accordance with FAR Part 36, a quotation is not an offer, and any clause provision to the contrary is hereby modified to be consistent with FAR Part 36. Where the word "offer/offeror" or a derivative of that word appears, it is changed to "quote/quoter" or a derivative of that word. This is a small business set aside, the applicable NAICS code is 238190. This solicitation will result in a Firm-Fixed Price Construction Contract awarded to the offeror with the Lowest Price. Offerors must be actively registered in System for Award Management - https://www.sam.gov. The US Coast Guard ANT Colfax has a requirement to replace a metal utility shed, to include: 1.1 The Contractor shall remove all debris, materials pertaining to the remains of the old shed. Contractor shall sweep parking lot and area for any metal nails, screws or hardware that could be a hazard to personnel or equipment. Contractor shall use a rolling magnet to pick up any roofing screws or nails. 1.2 Installation of New Shed The Contractor shall install a replacement metal shed 26 L x 20 W x 13 H and anchor to the ground. The new shed shall be installed in same location as the old shed. Shed is to be insulated inside with a 12 W x 12 H Mechanical Roll up door and a walk-in door 36 x 80 . Contractor shall install the shed on the governments property. The COR will provide guidance on the exact location for the shed and the limits of the governments property. Please see the attached Statement of Work for specifications of work. 38 Calendar Day ARO FOB Destination to: U.S. Coast Guard ANT Colfax 350 Control House Rd. Colfax, LA 71417 FAR 52.237-1 -- Site Visit (Apr 1984). Offerors or quoters are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award. Date and place of delivery and acceptance is on or before September 29, 2021. Principle Place of Performance: U.S. Coast Guard ANT Colfax 350 Control House Rd. Colfax, LA 71417 The Government Point of Contact (POC) for this work is MK1 Thomas Dedinsky @ Thomas.J.Dedinsky@uscg.mil or by phone @ (318) 627-2783. All work shall be coordinated through the POC. All quotes are due at USCG Base New Orleans by 4:00pm CST on August 22, 2021. Submit quotes to the following e-mail address(es): Brandon.R.Thompson@uscg.mil Any and all questions regarding this solicitation shall be submitted in writing to the Contract Specialist at Brandon.R.Thompson@uscg.mil no later than August 22, 2021, 4:00pm CST or the question may not be answered. Any and all questions regarding this solicitation shall be submitted in writing to the Contract Specialist at Brandon.R.Thompson@uscg.mil no later than 22 June 2021, 4:00PM Eastern Standard Time or the question may not be answered.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:70Z02921QPMW09800
  1. Combined Synopsis
  1. 7×
    Combined SynopsisCurrentApr 15, 2021

    Metal Utility Shed

    Notice 1c76268eab8d44738020fb93aaa23868 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
THIS IS A REQUEST FOR INFORMATION (RFI) ONLY AND YOUR RESPONSE IS NOT AN OFFER. SERIOUS INQUIRIES ONLY AND SUBMISSIONS MUST BE FROM A US-BASED CONTRACTOR. THIS IS NOT A REQUEST FOR QUOTES (RFQ). NO SOLICITATION IS AVAILABLE AT THIS TIME. THIS REQUEST FOR INFORMATION DOES NOT COMMIT THE GOVERNMENT TO PAY ANY COSTS INCURRED IN PREPARATION OF ANY SUBMISSION TO THIS NOTICE, OR TO CONTRACT FOR ITEMS/SERVICES. This Request for Information (RFI) is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI marked Proprietary will be handled accordingly. Responses to the RFI will not be returned. Information provided in response to this RFI will be used to assess tradeoffs and alternatives available for determining how to proceed in the acquisition process for a solution. In accordance with RFO 15.101(c)(2), responses to this RFI are not offers and cannot be accepted by the Government to form a binding contract. BACKGROUND/PURPOSE: The U.S. Army Corps of Engineers (USACE) Engineer Research and Development Center (ERDC) is conducting market research to determine sources’ competencies and capabilities to execute the on-site fabrication and final assembly of a three-bay, monolithic reinforced concrete High-Performance Magazine (HPM) structure. This is for a test structure for experimental purposes only and in the course of testing the structure will be completely destroyed and the site will be retrograded. The scope requires the full, in-situ assembly of the HPM structure at a designated Government test range at Fort Polk, LA. The process involves mobilizing all materials and equipment to the site, erecting temporary formwork systems, installing reinforcing steel cages, and placing concrete to form the final test structure according to the attached Description of Requirement (DOR). This is not a pre-cast or modular system; the final deliverable is the fully assembled and cured structure fabricated at its final location. The primary materials to be procured and processes to be performed are listed below. Reinforcing Steel (Rebar): Procure, deliver, and install prefabricated steel reinforcement into a intergrated cage within the formwork Cast-in-Place Concrete: Procure and received ready-mix concrete; place material into the erected formwork; perform consolidation, finishing and curing. Structural Sand Fill: Procure, deliver, and install sand into desiginated wall cavities post-concrete. Concrete Formwork: Fabricate or procure formwork panels; perform on-site erection, bracing, and subsequent stripping of the complete system for walls, slabs, and doors. Reinforced Concrete Doors: Perform on-site formwork erection, rebar installation, and concrete placement for three separate door components. Embedded Items: Procure and install all required embeds, sleeves, and plates within the formwork prior to concrete placement. A DRAFT Description of Requirement (DOR), which includes a detailed description of the structure, is attached. Please note this is subject to change. The purpose of this Request for Information (RFI) is to obtain information on the availability and capability of vendors to procure the necessary raw materials, provide shipping of materials and equipment to Fort Polk, LA, and perform the complete on-site fabrication and assembly of the structure to specification. Additionally, this RFI seeks to determine industry interest in participation for market research purposes before a Request for Quote (RFQ) is released for these requirements. Not responding to this RFI does not preclude participation in any future RFQ or RFP, if any is issued. If a solicitation is released, it will be synopsized on the SAM.gov website. It is the responsibility of the potential offerors to monitor this site for additional information pertaining to this requirement. Respondents are requested to review the attached DRAFT DOR and submit responses to the following questions: 1. Contact information: Interested organizations should respond by providing the Government the following information: Company name, Address, Point of Contact, business title, Telephone number, Email address, Company Cage Code, Primary NAICS, Business Size, i.e., Large, Small (if small, state your category). Current Registration in SAM, Webpage address. 2. Capabilities Statement: A description of capabilities in providing 1) the minimum required items and capabilities described in the RFI and Draft DOR to the specified location(s) and 2) Experience. Previous procurement information, including contract numbers and customers, is recommended. 3. Business Status (based on NAICS 238120): Please indicate the business status of your company (Socio-Economic Factors: 8(a), HUBZone, Service-Disabled Veteran-Owned Business, Small Disadvantaged Business etc.). 4. Answer the following Questions: All interested contractors are requested to provide comprehensive written responses to the questions below. Question #1- Project Experience: Provide at least two (2) and no more than four (4) examples of projects completed by your company within the last 7 years that are of a similar scale and complexity to the HPM structure. For each project, provide the following details: Project Name and a brief description. Final concrete compressive strength(s) and total cubic yards placed. Approximate final reinforcing steel density (lbs/CY). A summary of your company's role (e.g., Prime Contractor, Concrete Subcontractor). Question #2- Self-Consolidating Concrete (SCC) Experience: The requirement is for 10,000 PSI SCC. Describe your company's experience with high-strength SCC. Specify your approach to: Mix design submittal and verification. Managing the high fluid pressure of SCC on formwork systems. On-site Quality Control testing Question #3- Formwork Systems: This project requires a robust, engineered formwork system. Does your company have in-house engineering capability to design and develop formwork plans, or is this service subcontracted? Please describe a challenging formwork scenario your company has successfully managed on a past project. Question #4- Reinforcing Steel: The project specifications require continuous, non-spliced rebar in many areas. Describe your company's experience and methods for installing long, heavy, and continuous reinforcing steel in congested, multi-layered wall and slab assemblies. Question #5- Core Competencies (Self-Perform vs. Subcontract): Please indicate which of the following core activities your company typically self-performs versus subcontracts: Heavy Concrete Formwork Design and Erection Reinforcing Steel Installation Concrete Placement and Finishing Earthwork and Site Logistics Materials QC Testing Question #6- Overall Capability: After reviewing the Description of Requirement, does your company have the capability to procure all materials and fully execute the on-site fabrication and assembly of the HPM structure as specified? If not, please specify which items or processes cannot be provided and why. Interested vendors must provide the above information no later than 3:00 PM Central Standard Time (CST) on 04 November 2026. Responses must be emailed to Shinita Jordan at Shinita.M.Jordan@usace.army.mil AND Sonia Boyd at Sonia.J.Boyd@usace.army.mil. Any questions related to this notice must be submitted in writing to Shinita Jordan and Sonia Boyd. Verbal questions will NOT be accepted. The Government will not reimburse companies for any costs associated with the submissions of their responses.
-Market Research11/04/2026
11/09/2026 UPDATE - ADDING RFI RESPONSES. SEE ATTACHED DOCUMENT ______________________________________________________________________________________________________ This posting is for Tinker AFB - MAC BOA Holders ONLY. After review of the project specific documents, if you are a Tinker AFB – MAC BOA Holder, please send an email to the Contracting Points of Contact as an RSVP stating you are interested in attending the Initial Site Visit. Your RSVP email must be received within 5 calendar days from the posting of this project. In your RSVP, please let us know if all personnel that will be attending the Initial Site Visit have base access. If anyone requires base access, you must forward with your RSVP the Entry Access List (EAL) so that we can know how many personnel require base access. ***** ONLY MAC BOA Prime Contractors are to RSVP, Subcontractors are to inform at least one Prime Contractor of their intention to attend and if a Subcontractor requires base access, they must be sponsored by a Prime Contractor. After receipt of your RSVP by October 20, 2026 COB CST and EAL if required, an Initial Site Visit is set for October 22, 2026 @ 10am CST–– B1134. RSVP required for TIME of the inital site visit. A calendar invite will be sent out to those who RSVP. You must attend the Initial Site Visit for the project to be considered eligible to propose. This posting is for Tinker AFB - MAC BOA Holders ONLY.
-Solicitation11/16/2026
The Oklahoma Air National Guard at Will Rogers Air National Guard Base in OKC, OK is hosting an Industry Day. This is to identify novel, commercially viable, and rapid-deployment technologies for structural repair and subgrade stabilization. The purpose of this event is to conduct market research pursuant to FAR Part 10 and assess industry capabilities regarding settlement remediation, void filling, load-bearing upderpinning, and ground improvement for mission-critical facilities and pavement infrastructure.
-Special Notice12/09/2026
EO 14398 - This requirement is for support services for the Earthquake Science Center- 5-YEAR IDIQ SEISMIC STATION CONSTRUCUCTION
-AwardedOpen
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 12445127Q0004 is issued as a Request for Quotation (RFQ) for: There are three (3) garage bay doors at Peaks and four (4) garage bay doors at MLWC for full replacement. Some bay doors shall receive 24 in x 12in clear, insulated, shatter-resistant glass windows. Eight (8) garage bay doors at Peaks will receive a complete general service and lubrication, and three (3) garage bay doors at Peaks need parts replaced or adjusted prior to complete general service and lubrication. The 11 bay doors receiving general service and lubrication will also receive new flexible seal strips. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 238190 Other Foundation, Structure, and Building Exterior Contractors. The small business size standard is $19 This acquisition is a Total Small Business Set- Aside. All responsible sources may submit a quotation which will be considered by the agency.
-Combined Synopsis11/23/2026

Additional Details

Solicitation Number

70Z02921QPMW09800

Archive Date

Sep 6, 2021

Office Address

NEW ORLEANS, LA, 70117