Notice ID: 4c4b2f1cce3446a38107f29487f512abSpecial Notice
: Notice of Intent to Solicit and Contract with Werres Corporation
Archived on September 6, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 1:00 PM UTC−04:00
- Posted
- August 17, 2023
- Notice type
- Special Notice
- NAICS
- 811310: Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Agency
- Department of Homeland SecurityUS COAST GUARD
Notice details
- Office
- SFLC PROCUREMENT BRANCH 3(00040)
- Place of performance
- Curtis Bay, MD, 21226
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- 70Z04023QALDV0001
- Notice ID
- 4c4b2f1cce3446a38107f29487f512ab
Description
NOTICE OF INTENT TO SOLICIT AND AWARD A SOLE SOURCE CONTRACT: The United States Coast Guard (USCG), Surface Forces Logistics Center, Shared Services Procurement Division intends to award a contract on a sole source basis to Werres Corporation, the Original Equipment Manufacturer (OEM) Raymond Corporations only authorized service provider for Maryland, Virginia, and DC. Raymond Forklift Trucks are maintained and updated through the OEMs proprietary software known as Forklift Firmware. The statutory authority for this acquisition is 41 U.S.C 1901(c), as implemented in FAR 13.106-1 (b) (1). In accordance with FAR 13.106-1(b) (1), the services listed below are available from only one source. The North American Industry Classification System Code (NAICS) is 811310 with a size standard of $12.5M. The Product Service Code (PSC) is J039. The small business set aside has been dissolved. This requirement is unrestricted. Preventative Maintenance Services for twelve (12) Raymond Forklift Trucks are for a base plus four years, to commence 7 September 2023. Solicitation number 70Z04023QALDV0001 is assigned. This notice of intent is not a request for competitive proposals; however, all responsible sources may submit a quotation to Carol.L.Dreszer@uscg.mil with 70Z03823QALDV0001 in the subject line which will be considered by the agency if received no later than 1:00 P.M., (EST) on August 22, 2023. A determination by the Government not to compete the proposed procurement is based on responses to Sources Sought Notice posted on December 30, 2022. This notice is solely within the discretion of the Government. Award will be made upon determination of fair and reasonable pricing.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
70Z04023QALDV0001- Special NoticeCurrentAug 17, 2023
: Notice of Intent to Solicit and Contract with Werres Corporation
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Notice of Intent to Sole Source to Phillips Corporation for updating software and preventative maintenance on a Haas UMC-750SS. GENERAL INFORMATION: Notice Type: Special Notice Contracting Office: 673d Contracting Squadron, JBER, AK Title: Notice of Intent to Sole Source to Phillips Corporation Response Deadline: 2:00PM AKST (6:00PM EST) on 17 Nov 2026 NAICS: 811310 PSC: J036 DESCRIPTION: The 673d Contracting Squadron on Joint Base Elmendorf-Richardson, AK has concluded their market research and intends to solicit, negotiate, and award a sole source firm-fixed price (FFP) contract under RFO 12, Acquisition of Commercial Products and Commercial Services, statutory authority of 10 U.S.C. 3204(a)(1), as implemented by RFO 6.103-1, Only one (1) responsible source and no other supplies or services will satisfy agency requirements to Phillips corporation, CAGE 3MPQ0. The proposed North American Industry Classification System (NAICS) code for this acquisition is 811310, with a small business size standard of $12.5 Million. REQUIREMENT DESCRIPTION: This FFP contract is for a non-personal service to provide technical and human machine interaction programming and preventative maintenance to the Metals Technology Maintenance Squadron shop’s 5th axis vertical milling machine. This service is required to restore the complete functionality of the Haas UMC-750SS that is used in the manufacturing and repairing of non-procurable aircraft and support equipment parts (See Attachment 1 - Haas UMC-750SS Statement of Work_Redacted). REASON FOR SOLE SOURCE: Based on concluded Market Research only Phillips Corporation can fulfill the entire requirement, to include software/firmware updates. SUBMISSION DETAILS: The anticipated award date is 18 November 2026. This notice is not a request for competitive proposals or quotes. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete this proposed contract action based upon responses to this notice is solely within the discretion of the Government. Responses must be received no later than 17 November at 2:00 PM (6:00PM EST) AKST. Responses must be submitted via email to the POCs indicated below.. POINTS OF CONTACT (POC): Contract Specialist: Mr. Jarod Lemke, jarod.lemke.1@us.af.mil Contracting Officer: Mr. Joseph Ford, joseph.ford.21@us.af.mil | 75% | Special Notice | 11/17/2026 |
Removal and placement of attic ventalation fans in accordance with the attached Statement Of Work (SOW) All wages and benefits must be in accordance with the wage rates for the Place of Preformance and Period Of Preformance. Wage rates attached. | 66% | Solicitation | 11/30/2026 |
The U.S. Coast Guard Academy in New London, Connecticut, intends to solicit for preventive maintenance, annual inspection, and corrective maintenance services for Government-owned mobile elevating work platforms (MEWPs), including scissor lifts and boom lifts. The Contractor shall furnish qualified competent personnel, labor, supervision, tools, test equipment, transportation, consumables, and quality control necessary to inspect and maintain the equipment in accordance with applicable U.S. Coast Guard Maintenance Procedure Cards, OSHA requirements, ANSI/SAIA A92 standards, original equipment manufacturer specifications, and all other applicable federal, state, and local requirements. Required services include firm-fixed-price annual preventive inspections for scissor lifts and boom lifts, with corrective maintenance, troubleshooting, repair, replacement, and adjustment services to be ordered on a time-and-materials basis through task orders upon Government approval. | 66% | Combined Synopsis | 11/16/2026 |
The Contractor shall provide all labor, materials, tools, safety equipment, supervision, and specialized machinery necessary to replace approximately 22 one inch bolts at the base of the turntable boom foundation on a BMC Broderson 18 Ton Mobile Crane Model: IC-250-3E See attached Statement of Work. It is anticipated that this procurement is 100% set-aside for Small Businesses using NAICS code of 811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance and a small business size standard of $12.5 million. The Government contemplates award of a Firm-Fixed Price contract resulting from this solicitation. See FAR 52.212-1 for submission instructions & FAR 52.212-2 for evaluation criteria. All quotes must be submitted by 5:00PM Eastern Time on 11/25/2026 via email to Jamie.C.Bridges@uscg.mil. Quotes shall be submitted via the SF-18. Questions about this solicitation must be submitted in writing to the Contracting Officer and Contract Specialist at the email addresses listed above no oral questions will be accepted. Questions must be submitted no later than 12:00PM EST on 11/23/26. All potential quoters are strongly encouraged to visit the site to field verify any/all quantities before submitting quotes. A site visit can schduled the week of 11/16/26. Interested parties must arrange site visits with Jamie Bridges at Jamie.C.Bridges@uscg.mil and Troy VanCleave at Troy.W.Vancleave@uscg.mil. Full name, date of birth, and REALID Driver's License number must be provided. | 66% | Solicitation | 11/25/2026 |
This solicitation is being issued as 100% set-aside for small businesses. The solicitation is for the performance of preventive maintenance (PM) and repair services on Government owned Material Handling Equipment (MHE) as required for the Defense Commissary Agency commissaries located at Richards-Gebaur and Whiteman AFB. The MHE consists of the following: Battery Chargers; Electric Pallet Jacks; Electric/Gas/Propane Forklifts, Walkie Riders, and Walkie Stackers. A Time and Materials contract is contemplated. The RFP will be posted on Beta.SAM.Gov at https://beta.sam.gov. Offerors may obtain a copy of the solicitation at this site. The product service code (PSC) is J039. North American Industry Classification System (NAICS) Code is 811310 and the business size standard is $8 million. All responsible sources may submit an offer, which will be considered by the above agency. By submission of an offer, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award of any contract resulting from this solicitation to include listing NAICS Code 811310 in the database prior to award of any contract resulting from this solicitation. Further information about registration may be found on the Internet at https://sam.gov/SAM. Questions pertaining to this notice and solicitation should be directed to David Mizelle via phone at 804-734-8000 x86489 or e-mail david.mizelle@deca.mil. | 64% | Solicitation | 03/15/2021 |
Additional Details
Solicitation Number
70Z04023QALDV0001
Archive Date
Sep 6, 2023
Office Address
BALTIMORE, MD, 21226