GovChime
Notice ID: cd09fd6b80cbc25aa634e43ac754c51fCombined Synopsis/Solicitation

CGC ALEX HAILEY BOILER REPAIR

Archived on November 23, 2019. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
7:00 AM UTC−08:00
Posted
October 25, 2019
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
336611: Ship Building and Repairing
Agency
Department of Homeland SecurityUS COAST GUARD

Notice details

Office
SFLC PROCUREMENT BRANCH 2(00085)
Place of performance
CGC ALEX HALEY C/O ISC KODIAK RECEIVING OFFICER BLDG 26 KODIAK, AK 99619 US , Kodiak, AK, 99619
PSC
20: SHIP AND MARINE EQUIPMENT
Last updated
Dec 5, 2025

Identifiers

Solicitation number
70Z08520QP4528700
Notice ID
cd09fd6b80cbc25aa634e43ac754c51f

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This Request for Quotations incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-84 dated Nov 1, 2015. All responsible sources may submit proposals that will be considered by the agency. The contract will be awarded on a firm-fixed-price basis using simplified acquisition procedures in accordance with FAR Part 13.5. Past performance will be considered in the selection of the awarded vendor. The United States Coast Guard Surface Force Logistics Center has a requirement for the following: TECHNICAL SERVICES FOR SHIPS SERVICE BOILER REPAIRS FOR CGC ALEX HALEY (WMEC-39) 1. Background. NR1 and NR2 ship service boilers (SSBs) are inoperable due to damaged fire tubes. The damage has allowed water to seep into the fire tubes and prevent fuel from lighting off. The cutter is unable to generate its own steam for heating. 2. References. a. ASME Boiler and Pressure Vessel Code b. Auxiliary Boiler Cyclotherm MC-2500 Type II Tech. Manual (CGTP 0951-018-8010) c. Code of Federal Regulations (CFR) Title 46, Part 61, Periodic Tests and Inspections d. SFLC Technical Standard 074-1; Welding and Allied Processes e. SFLC Technical Standard 517; Auxiliary Boilers 3. Scope. Provide services of a commercial boiler inspector certified by the National Board of Boiler and Pressure Vessel Inspectors to perform an inspection of both auxiliary boilers and recommend repairs. The contractor shall provide services to repair/renew boiler fire tubes and other repairs authorized by the Coast Guard inspector. Repair/renewal shall be performed exclusively by contractors. The contractor shall supply all equipment, expendable parts and consumable materials necessary for performing repairs or renewal, and pressure test both boilers upon completion of repairs. The scope of this work is to be performed onboard USCGC ALEX HALEY while moored in Kodiak, AK at USCG Base Kodiak. 4. Objective. The objective of service is to inspect and repair damage in the SSB fire tubes. Each SSB requires renewal of approximately ten fire tube(s). 5. Tasks. The contractor shall provide all equipment, expendable parts and consumable materials, necessary to inspect and repair fire tubes in the SSBs, with the exception of government furnished materials listed below. Specific tasks to complete are: a. Perform internal and external inspection in accordance with the National Board Inspection Code (NBIC) of each boiler and make recommendations for repair. b. Clean all fire tubes in accordance with reference (b). c. Renew an estimated ten (10) fire tubes in each boiler following guidance in reference (b) and (d). d. Hydrotest in the presence of the Coast Guard Inspector using reference (c) as guidance. Contractor is responsible for safety during repairs. S/F will provide contractor with knowledge of SSB components/operation procedures explained in reference (b). 6. Government furnished Equipment: Approximately 30 fire tubes. 7. Security Requirements: Send name, birthday and SSN of each contractor to CWO Jason Speth (Jason.W.Speth@uscg.mil) prior to arrival to gain access to Base Kodiak. Provide ID upon entry. 8. Place of performance: USCGC ALEX HALEY, USCG Base Kodiak, Kodiak, AK. 9. Period of performance: ASAP a. Primary: 11 Nov - 15 Nov 2019 b. Secondary: 18 Nov - 22 Nov 2019 Location of work to be performed: CGC ALEX HALEY C/O ISC KODIAK RECEIVING OFFICER BLDG 26 KODIAK, AK 99619 US Period of Performance: a. Primary: 11 Nov - 15 Nov 2019 b. Secondary: 18 Nov - 22 Nov 2019 INTERESTED VENDORS PLEASE SEND OFFICIAL QUOTE, WITH A SAM.GOV REGISTERED DUNS NUMBER, AND EMAIL TO ANTHONY.J.ANDALUZ@USCG.MIL

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:70Z08520QP4528700
  1. Combined Synopsis
  1. Combined SynopsisCurrentOct 25, 2019

    CGC ALEX HAILEY BOILER REPAIR

    Notice cd09fd6b80cbc25aa634e43ac754c51f on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
DESCRIPTION OF WORK: The contractor to provide all necessary materials, equipment, personnel as necessary to perform Drydock repairs to the U.S. Coast Guard Cutter USCGC PATOKA (WLB 203) FY27 Drydock Availability 225’ Buoy Tender homeported in Greenville, MS, all in exact accordance with this solicitation and the attached specification. See Attachment 2. Your quotation must arrive no later than 04 January, 2027 at 2:00 pm Eastern Time; Quotations should be sent via electronic mail (e-mail) to Jayne.gluck@uscg.mil Contract Specialist and Sandra.a.martinez@uscg.mil. Contracting Officer.
70%
Combined Synopsis01/04/2027
CGC ANVIL - See attached documents CUTTER's Home Port: 196 Tradd St Street, Charleston, SC QUOTATION DUE DATE: Your quotation must arrive no later than November 13, 2026 at 10:00 am Eastern Time; Quotations should be sent via electronic mail (e-mail) to delarue.s.shelton@uscg.mil and Sandra.a.martinez@uscg.mil. Quotes must be valid for 120 days.
70%
Combined Synopsis11/16/2026
Sources Sought Title: USCGC PATOKA (WLR-75408) FY27 DD Repairs The U.S. Coast Guard is looking for sources which would be interested in performing Drydock repairs for Coast Guard Cutter USCGC PATOKA (WLR-75408) USCGC PATOKA (WLR-75408 ) is a 75 ft. river buoy tender USCGC PATOKA HOMEPORT ADDRESS: 1797 HARBOR FRONT ROAD, GREENVILLE, MS 38701 ANTICIPATED PERIOD OF PERFORMANCE IS 04/13/2027 to 06/22/2027. (Subject to change) (Subject to Availability of Funds) PLACE OF PERFORMANCE: Contractors Facility The scope of this acquisition is for the drydock repairs of various work items for USCGC PATOKA work will include, but is not limited to: WORK ITEM 1: Fire Prevention Requirements DRYDOCK WORK ITEM 2: Hull Plating, U/W Body, Inspect - Tender WORK ITEM 3: Hull Plating, U/W Body, Ultrasonic Testing - Tender WORK ITEM 4: Hull Plating, Freeboard, Ultrasonic Testing - Tender WORK ITEM 5: U/W Body, Preserve, 100 percent - Tender WORK ITEM 6: Hull Plating Freeboard, Preserve, 100 Percent- Tender WORK ITEM 7: Appendages, U/W, Leak Test – Tender WORK ITEM 8: Propulsion Shaft Rope Guards, Inspect WORK ITEM 9: Appendages, U/W, Internal, Preserve - Tender WORK ITEM 10: Voids, Non-Accessible, Leak Test - Tender WORK ITEM 11: Voids, Non-Accessible, Internal Surfaces, Preserve WORK ITEM 12: Tanks, MP Fuel Service, Clean and Inspect - Tender WORK ITEM 13: Tanks, Potable Water, Clean and Inspect - Tender WORK ITEM 14: Tanks, Ballast, Clean and Inspect - Tender WORK ITEM 15: Voids, Accessible, Clean and Inspect WORK ITEM 16: Propulsion Shafting, Straighten WORK ITEM 17: Propulsion Shaft Seals, Mechanical Overhaul and Inflatable Renew WORK ITEM 18: Propulsion Shafting, Remove, Inspect, and Reinstall WORK ITEM 19: Propulsion Shaft Bearings (External), Renew WORK ITEM 20: Stern Tube Interior Surfaces, Preserve, 100 Percent WORK ITEM 21: Propeller, Perform Minor Repairs and Reconditioning WORK ITEM 22: Propellers, Remove, Inspect, and Reinstall WORK ITEM 23: Keel Coolers, Clean, Inspect and Hydro WORK ITEM 24: Fathometer Transducer, General Maintenance WORK ITEM25: Sea Valves and Waster Pieces, Overhaul Or Renew WORK ITEM26: Sea Strainers, Duplex, All Sizes, Overhaul WORK ITEM 27: Rudder Assembly, Remove, Inspect And Reinstall WORK ITEM 28: Rudders, Preserve, 100 Percent WORK ITEM 29: Rudder Stock Housing, Lower, Renew WORK ITEM 30: Rudder Stock Housing, Upper, Renew WORK ITEM 31: Rudder Stock, Rebuild WORK ITEM 32: Spuds, Overhaul – Tender WORK ITEM 33: Spud Wells, Preserve - Tender WORK ITEM 34: Spud Wells, Inspect - Tender WORK ITEM 35: Sewage Holding Tanks, Clean and Inspect - Tender WORK ITEM 36: Tanks (Sewage Holding), Preserve, 100 percent - Tender WORK ITEM 37: Accessible Voids, Preserve, 100 Percent - Tender WORK ITEM 38: Tanks, Ballast, Preserve, 100 Percent – Tender WORK ITEM 39: Tanks, Fuel, Preserve, 100 Percent - Tender WORK ITEM 40: Tanks, Potable Water Preserve, 100 Percent - Tender WORK ITEM 41: Decks - Exterior, Preserve, Non-Skid Broadcast Grit System-Tender WORK ITEM 42: Cathodic Protection, Magnesium Anodes, Renew, - Tender WORK ITEM 43: Drydock - Tender WORK ITEM 44: Temporary Services, Provide – Tender and Barge WORK ITEM 45: Sea Trial Performance, Support, Provide Tender and Barge WORK ITEM 46: Appendages, U/W, Leak Test - Barge WORK ITEM 47: Appendages, U/W, Internal, Preserve - Barge WORK ITEM 48: Voids, Non-Accessible, Leak Test - Barge WORK ITEM 49: Voids, Non-Accessible, Internal Surfaces, Preserve - Barge WORK ITEM 50: Tanks, MP Fuel Service, Clean and Inspect - Barge WORK ITEM 51: Tanks, Potable Water, Clean and Inspect - Barge WORK ITEM 52: Tanks, Ballast, Clean and Inspect - Barge WORK ITEM 53: Voids, Accessible, Clean and Inspect - Barge WORK ITEM 54: Keel Coolers, Clean, Inspect and Hydro - Barge WORK ITEM 55: Fathometer Transducer, General Maintenance – Barge WORK ITEM 56: Accessible Voids, Preserve, 100 Percent - Barge WORK ITEM 57: Tanks, Ballast, Preserve, 100 Percent - Barge WORK ITEM 58: Tanks, Fuel, Preserve, 100 Percent - Barge WORK ITEM 59: Tanks, Potable Water, Preserve, 100% - Barge WORK ITEM 60: U/W Body, Preserve, 100 percent - Barge WORK ITEM 61: Hull Plating Freeboard, Preserve, 100 Percent - Barge WORK ITEM 62: Cathodic Protection, Magnesium Anodes, Renew - Barge WORK ITEM 63: Sea Valves and Waster Pieces, Overhaul Or Renew - Barge WORK ITEM 64: Sea Strainers, Duplex, All Sizes, Overhaul - Barge WORK ITEM 65: Hull Fittings, Weight Handling Rigging Hardware, Inspect and Test- Barge WORK ITEM 66: Spuds, Overhaul - Barge WORK ITEM 67: Spud Wells, Preserve - Barge WORK ITEM 68: Spud Wells, Inspect - Barge WORK ITEM 69: Buoy And Cargo Crane, Inspect And Service - Barge WORK ITEM 70: Decks – Exterior (Buoy or Construction Deck), Preserve 100% WORK ITEM 71: Drydock - Barge WORK ITEM 72: Boat Davit Winch, Shrink Wrap WORK ITEM 73: Buoy and Cargo Handling Crane, Shrink Wrap WORK ITEM 74: Deck Covering, Wet/ Dry, Seal WORK ITEM 75: Piping Insulation, Renew WORK ITEM 76: Watertight Hatches, External DC Deck and Below, Renew Companies which would be interested in submitting a proposal for this requirement should reply to this Sources Sought Notice noting their business size status such as large business, small business, HUBZone, Service-Disabled Veteran-Owned, Women Owned Small Businesses… Replies should be sent by 06 November 2026, 11:00am Eastern Standard Time to Ms. Jayne Gluck, email: Jayne.Gluck@uscg.mil and Ms. Sandra Martinez, email: Sandra.A.Martinez@uscg.mil Include the following information: Subject Line: Sources Sought Response for Drydock (DD) Repairs. 1. Company Name, Address, and Unique Entity ID: 2. Point of Contact, Phone number, and Email address: 3. Business Size applicable to the NAICS Code: • Please state which of the following applies to your company for Business Size: a. 8(a) Small Business Concern. b. HUBZone Small Business Concern. c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC). d. Veteran Owned Small Business Concern (VOSBC). e. Economically Disadvantaged Woman Owned Small Business Concern (EDWOSB). f. Woman Owned Small Business Concern (WOSBC). g. Small Business Concern. h. Large Business Concern 4. A positive Statement of your intention to submit a bid for this solicitation as a prime contractor 5. Documentation Verifying Small Business Certification. Please provide the following documentation as it applies to your company: If claiming 8(a) status, provide a copy of your 8(a) Certification from the Small Business Administration (SBA). If claiming HUBZone status, provide a copy of your HUBZONE Certificate from the SBA. If claiming SDVOSBC status, provide documentation that shows the Service-Disabled Veteran (SDV) unconditionally owns 51% of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Provide documentation that shows the business is small under the NAICS code 336611. If claiming VOSBC status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million If claiming Woman Owned Small Business status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611. Shortly after receiving responses the Coast Guard will determine if this requirement will be set aside or unrestricted. After the determination a combined synopsis/solicitation will be posted on this website https://sam.gov
66%
Market Research11/06/2026
The United States Coast Guard Deputy Commandant for Systems (DCS) is issuing this combined synopsis/solicitation on behalf of the Surface Forces Logistics Center (SFLC) to award a firm-fixed-price service contract, as detailed in the attached Statement of Work. This requirement consists of performing all on-site labor and services to perform open, inspect, report, and repair services on the anchor windlass and gearbox assembly in support of the USCGC KATMAI BAY (WTGB 101). All work must be performed on-site at 337 E Water St, Sault Sainte Marie, MI 49783 and the Contractor's off-site repair facility as required for machining and shop inspection. The planned Period of Performance (PoP) is from 16 November 2026 through 20 November 2026. This acquisition is a 100% total small business set-aside under NAICS code 811310, with a corresponding small business size standard of $12.5 million. The applicable Product Service Code is J020. The Government will award a contract resulting from this solicitation to the responsible offeror whose quote conforming to the solicitation is most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers: 1. Technical Capability (Pass/Fail) 2. Past Performance (Pass/Fail) 3. Total Price A quotation must receive an Acceptable rating for all non-price factors to be eligible for award. Among all acceptable quotations, award will be made to the responsible offeror submitting the lowest evaluated price. To establish Technical Capability (Pass/Fail), the quotation must demonstrate a clear understanding of the work statement requirements, conform strictly to all specifications in the attached Statement of Work, and provide any adequate capability and corporate experience documentation required by the solicitation. Failure to meet these criteria will render the quotation unacceptable. The Government will evaluate recent (completed within the last three years) and relevant past performance to assess the likelihood of successful performance. Past performance will be evaluated on an acceptable or unacceptable basis. To receive an acceptable rating, past performance must demonstrate a rating of satisfactory or higher performance of similar work. Offerors without recent or relevant past performance will be assessed as "Neutral" and considered acceptable for award. Past performance demonstrating marginal or below performance is unacceptable. Offerors shall identify all subcontractors anticipated to perform work under this contract. For each subcontractor, the offeror shall provide the subcontractor’s name, address, point of contact, phone number, the specific work items/specifications they will perform, and the percentage of work they will execute. Submit offers electronically via email to the points of contact identified in this notice. The Government does not prescribe a specific quotation format. Offerors must submit a quotation that clearly identifies the items offered and demonstrates compliance with the stated requirements. Submissions must be complete, clear, and presented in a format that allows effective evaluation by the Government. Submit all questions via email to the points of contact identified in this notice. The Government will not accept telephone inquiries. Submit offers on a firm-fixed-price basis. Prices must be all-inclusive and must cover all costs associated with providing the services, including but not limited to manufacturing, packaging, handling, transportation, duties, tariffs, fees, and any other costs. The Government may consider offers nonresponsive if they include conditional pricing, price escalation language, or statements indicating that prices are subject to adjustment based on future costs or fees. The Government intends to evaluate offers and make award without discussions; therefore, offerors should submit their best offer with initial submission. The Statement of Work and the list of applicable FAR provisions and clauses are attached to this notice.
63%
Combined Synopsis11/12/2026
Sources Sought Title: USCGC HENRY BLAKE DRYDOCK REPAIRS The U.S. Coast Guard is looking for sources which would be interested in performing Drydock Repairs for Coast Guard Cutter HENRY BLAKE (WLM 563) USCGC HENRY BLAKE (WLM 563) HOMEPORT ADDRESS: 2000 W. Marine View Drive, Everett, WA. 98207 ANTICIPATED PERIOD OF PERFORMANCE: July 7, 2027, to September 15, 2027 (Subject to change) PLACE OF PERFORMANCE: Contractor Facility The scope of this acquisition is for the drydock repairs of various work items for USCGC HENRY BLAKE (WLM 563). The work will include, but is not limited to: (subject to change) Fire Prevention Requirements «TYPE» Hull Plating, U/W Body, Inspect Hull Plating, U/W Body, Ultrasonic Testing Hull Plating, Freeboard, Ultrasonic Testing U/W Body, Preserve, 100 percent U/W Body, Preserve, Partial, Condition A U/W Body, Preserve, Partial, Condition B U/W Body, Preserve, Partial, Condition C Hull Plating Freeboard, Preserve, Partial Hull Plating Freeboard, Preserve, 100 Percent Hull Plating Freeboard (Buoy Port Areas), Preserve Appendages, U/W, Leak Test Appendages, U/W, Internal, Preserve Voids, Non-Accessible, Internal Surfaces, Preserve Tanks, MP Fuel Stowage and Overflow, Clean and Inspect Tanks, MP Fuel Service, Clean and Inspect Tanks, Hydraulic Oil Stowage and Service, Clean and Inspect Tanks, Potable Water, Clean and Inspect Tanks, Potable Water Preserve, 100 Percent Tanks, Potable Water, Preserve, Partial Tanks, Ballast, Clean and Inspect Tanks, Ballast, Preserve, 100 Percent Tanks, Ballast, Preserve, Partial Tanks, Dirty Oil and Waste, Clean and Inspect Sewage Holding Tanks, Clean and Inspect Tanks (Sewage Holding), Preserve, 100 percent Tanks (Sewage Holding), Preserve, Partial Grey Water Holding Tanks, Clean and Inspect Sewage Piping, Clean and Flush Grey Water Piping, Clean and Flush Z-Drive Input Drive Shaft, Bearings Inspect Z-Drive Coolers, Clean and Inspect Z-Drive Input Drive Shaft, Thrust Bearing Renewal Thruster Unit (General), Overhaul Thruster Unit Bearings, Renew Main Diesel Engine, MDE, Exhaust Piping, Commercial Clean Ship Service Diesel Generator, SSDG, Exhaust Piping, Commercial Clean Vent Ducts, Galley and Pantry Room, All, Commercial Cleaning Vent Ducts, Laundry Exhaust, Commercial Cleaning Vent Ducts, All Other, Commercial Cleaning Fathometer Transducer, Renew Underwater Speed Log, Transducers, Renew Sea Bay, Clean and Inspect Sea Valves and Waster Pieces, Overhaul Or Renew Sea Bay, Preserve 100% Sea Bay, Preserve – Partial Sea Strainers, Duplex, All Sizes, Overhaul Sea Strainers, Simplex, All Sizes, Clean and Inspect Anchor Windlass, Inspect And Service Anchor Chains and Ground Tackle, Inspect and Repair Anchor Chain and Ground Tackle, Preserve Hull Fittings (Mooring and Towing), Inspect and Test Warping Capstan (Aft), Inspect and Service Chain Locker, Preserve, 100 Percent Exhaust Stacks (Exterior), Preserve – Partial Cathodic Protection, Zinc Anodes, Renew, Drydock Temporary Services, Provide - Cutter Temporary Messing and Berthing, Provide Sea Trial Performance, Support, Provide Sewage Service Piping COV, Install Bilge and Ballast Valves, Overhaul or Renew Bilges, Machinery Space, Clean and Inspect Bilges, Preserve Deck Covering, Interior, Wet and Dry, Renew Cargo Hatch Hinge, Modify Flame Detectors, Replace Companies which would be interested in submitting a proposal for this requirement should reply to this Sources Sought Notice noting their business size status such as large business, small business, HUBZone, Service-Disabled Veteran-Owned, Women Owned Small Businesses… Include the following information: Subject Line: Sources Sought Response for Drydock (DD) Repairs. 1. Company Name, Address, and Unique Entity ID: 2. Point of Contact, Phone number, and Email address: 3. Business Size applicable to the NAICS Code: • Please state which of the following applies to your company for Business Size: a. 8(a) Small Business Concern. b. HUBZone Small Business Concern. c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC). d. Veteran Owned Small Business Concern (VOSBC). e. Economically Disadvantaged Woman Owned Small Business Concern (EDWOSB). f. Woman Owned Small Business Concern (WOSBC). g. Small Business Concern. h. Large Business Concern 4. A positive Statement of your intention to submit a bid for this solicitation as a prime contractor 5. Documentation Verifying Small Business Certification. Please provide the following documentation as it applies to your company: If claiming 8(a) status, provide a copy of your 8(a) Certification from the Small Business Administration (SBA). If claiming HUBZone status, provide a copy of your HUBZONE Certificate from the SBA. If claiming SDVOSBC status, provide documentation that shows the Service-Disabled Veteran (SDV) unconditionally owns 51% of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Provide documentation that shows the business is small under the NAICS code 336611. If claiming VOSBC status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, makes long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million If claiming Woman Owned Small Business status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611. Shortly after receiving responses the Coast Guard will determine if this requirement will be set aside or unrestricted. After the determination a combined synopsis/solicitation will be posted on this website https://sam.gov Replies should be sent by 12 November 2026, 1:00pm Eastern Standard Time to Mr. Iran Walker, email: Iran.N.Walker@uscg.mil.
62%
Market Research11/12/2026

Additional Details

Solicitation Number

70Z08520QP4528700

Archive Date

Nov 23, 2019

Office Address

ALAMEDA, CA, 94501