GovChime
Notice ID: 1fcddf16e9bf4bc6a6fe3c3ff754046dSolicitation

REPAIR OF PUMPING UNIT, SEWAGE

Archived on January 4, 2022. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
9:00 AM UTC−05:00
Posted
December 6, 2021
Notice type
Solicitation
NAICS
336611: Ship Building and Repairing
Agency
Department of Homeland SecurityUS COAST GUARD

Notice details

Office
SFLC PROCUREMENT BRANCH 2(00085)
Last updated
Sep 9, 2025

Identifiers

Solicitation number
70Z08522Q39006B00
Notice ID
1fcddf16e9bf4bc6a6fe3c3ff754046d

Description

PLEASE SEE THE ATTACHMENTS FOR THE SOLICIATION DETAILS.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:70Z08522Q39006B00
  1. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. SolicitationCurrentDec 6, 2021

    REPAIR OF PUMPING UNIT, SEWAGE

    Notice 1fcddf16e9bf4bc6a6fe3c3ff754046d on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
COMBINED SYNOPSIS / SOLICITATION Commercial Services | USCGC Maple Fuel System Repair Solicitation Number 52000PR270000400 Procurement Type Request for Quotations (RFQ) – Commercial Services Issuing Agency United States Coast Guard (USCG) Period of Performance TABLE OF CONTENTS 1. Solicitation Information. 3 2. Description of Solicitation. 3 3. Schedule of Supplies / Services (Price Schedule). 3 3.1 Vendor Information (To Be Completed by Offeror). 4 4. Scope of Work (SOW). 5 4.1 General Information. 5 4.2 Background. 5 4.3 Scope of Work Requirements. 5 4.3.1 Contractor Responsibilities. 5 4.3.2 Specific Work Items. 5 4.4 Condition Found Report (CFR) Requirement. 5 4.5 Materials & Parts. 6 4.6 Testing & Acceptance. 6 4.7 Deliverables. 6 4.8 Environmental & Safety Compliance. 6 5. Instructions to Offerors & Evaluation Criteria. 7 5.1 Instructions for Submitting Quotations. 7 5.2 Basis for Award. 7 6. Applicable Clauses and Provisions. 7 1. Solicitation Information Solicitation Number: 52000PR270000400 Procurement Type: Request for Quotations (RFQ) – Commercial Services Set-Aside Designation: Small Business Set-Aside Issuing Agency: United States Coast Guard (USCG) Unit / Vessel: USCGC Maple (Asset Type: CB-L, Hull Number: 22355) Location of Work: 2301 E Fort Macon Rd., Atlantic Beach, NC 28512 Period of Performance: TBD Unit Point of Contact (POC): MKC Rand Willette | Phone: 813-997-6886 | Email: Rand.a.willette@uscg.mil COR: Stephen Donithan |Stephen.W.Donithan@uscg.mil Contracting Officer (Contracting Actions only) |Joshua.C.Richardson2@uscg.mil 2. Description of Solicitation This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6 and FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a separate written solicitation will not be issued. Solicitation Number 52000PR270000400 is issued as a Request for Quotation (RFQ). This acquisition is set aside 100% for Small Business concerns. All responsible small business sources may submit a quotation which shall be considered by the agency. 3. Schedule of Supplies / Services (Price Schedule) Contractors shall provide firm-fixed-price (FFP) quotations for the following Contract Line Item Numbers (CLINs): CLIN Description Qty Unit Unit Price Total Price 0001 Fuel System Repair and Fuel Polishing (USCGC Maple CB-L 22355): Provide all labor, materials, equipment, and supervision to replace high-pressure fuel pump, feed pump, fuel banjo, banjo gasket, fuel O-ring, and injectors due to water contamination; clean fuel cooler and lines; polish fuel; and conduct operational testing in accordance with the attached Scope of Work (SOW). 1 Job $__________ $__________ TOTAL Total Quoted Price $__________ 4. Scope of Work (SOW) 4.1 General Information Unit: USCGC Maple Asset Type: CB-L Hull Number: 22355 Location of Work: 2301 E Fort Macon Rd., Atlantic Beach, NC 28512 Period of Performance Dates: 10/25/2026 – 11/15/2026 Unit POC: MKC Rand Willette / 813-997-6886 / Rand.a.willette@uscg.mil 4.2 Background While underway, the 22355 received a fault code for low fuel rail pressure: Code MID:128 PID 164 FMI 1 on Engine SN A1186212. 4.3 Scope of Work Requirements 4.3.1 Contractor Responsibilities Provide all labor, materials, equipment, and supervision necessary to complete the work described. Comply with all applicable USCG policies, manufacturer specifications, and regulatory requirements. 4.3.2 Specific Work Items Work Item 1: Replace high pressure fuel pump, feed pump, fuel banjo, banjo gasket, fuel O-ring, and injectors due to water contamination. Clean fuel cooler and lines. Polish fuel. 4.4 Condition Found Report (CFR) Requirement If additional discrepancies, deficiencies, or required repairs are identified that are outside the defined Scope of Work, the contractor shall: Immediately notify the Unit POC. Submit a written Condition Found Report (CFR) detailing: Description of discrepancy Recommended corrective action Parts and labor breakdown Cost estimate Impact to schedule Note: No additional work outside the approved Scope of Work shall be performed without written authorization from the Government. Unauthorized work will not be reimbursed. 4.5 Materials & Parts Original Equipment Manufacturer (OEM) parts are required unless otherwise approved. Provide part numbers and specifications. All materials shall meet manufacturer and USCG standards. 4.6 Testing & Acceptance Conduct operational testing upon completion. Demonstrate proper functionality to the USCG representative. Provide written service report and warranty documentation. Work is considered complete upon Government acceptance. 4.7 Deliverables Itemized invoice Service report Parts list (with serial numbers, if applicable) Warranty documentation (if applicable) 4.8 Environmental & Safety Compliance Proper disposal of hazardous materials. Spill prevention measures required. Compliance with all federal, state, and local regulations. 5. Evaluation Criteria 5.2 Basis for Award Award will be made to the responsible Small Business offeror whose quotation conforms to the solicitation requirements and is most advantageous to the Government, price and other factors considered (Technical Capability, OEM Parts Compliance, Past Performance, and Price). 6. Applicable Clauses and Provisions The following Federal Acquisition Regulation (FAR) and Homeland Security Acquisition Regulation (HSAR) provisions and clauses apply to this solicitation and subsequent award: FAR 52.212-1 – Instructions to Offerors—Commercial Products and Commercial Services FAR 52.212-2 – Evaluation—Commercial Products and Commercial Services FAR 52.212-3 – Offeror Representations and Certifications—Commercial Products and Commercial Services FAR 52.212-4 – Contract Terms and Conditions—Commercial Products and Commercial Services FAR 52.212-5 – Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services (incorporating FAR 52.219-6, Notice of Total Small Business Set-Aside) FAR 52.232-40 – Providing Accelerated Payments to Small Business Subcontractors HSAR 3052.212-70 – Contract Terms and Conditions Applicable to DHS Acquisition of Commercial Items
76%
Combined Synopsis11/06/2026
The United States Coast Guard Deputy Commandant for Systems (DCS) is issuing this combined synopsis/solicitation on behalf of the Surface Forces Logistics Center (SFLC) to award a firm-fixed-price service contract, as detailed in the attached Statement of Work. This requirement consists of performing all on-site labor and services to perform open, inspect, report, and repair services on the anchor windlass and gearbox assembly in support of the USCGC KATMAI BAY (WTGB 101). All work must be performed on-site at 337 E Water St, Sault Sainte Marie, MI 49783 and the Contractor's off-site repair facility as required for machining and shop inspection. The planned Period of Performance (PoP) is from 16 November 2026 through 20 November 2026. This acquisition is a 100% total small business set-aside under NAICS code 811310, with a corresponding small business size standard of $12.5 million. The applicable Product Service Code is J020. The Government will award a contract resulting from this solicitation to the responsible offeror whose quote conforming to the solicitation is most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers: 1. Technical Capability (Pass/Fail) 2. Past Performance (Pass/Fail) 3. Total Price A quotation must receive an Acceptable rating for all non-price factors to be eligible for award. Among all acceptable quotations, award will be made to the responsible offeror submitting the lowest evaluated price. To establish Technical Capability (Pass/Fail), the quotation must demonstrate a clear understanding of the work statement requirements, conform strictly to all specifications in the attached Statement of Work, and provide any adequate capability and corporate experience documentation required by the solicitation. Failure to meet these criteria will render the quotation unacceptable. The Government will evaluate recent (completed within the last three years) and relevant past performance to assess the likelihood of successful performance. Past performance will be evaluated on an acceptable or unacceptable basis. To receive an acceptable rating, past performance must demonstrate a rating of satisfactory or higher performance of similar work. Offerors without recent or relevant past performance will be assessed as "Neutral" and considered acceptable for award. Past performance demonstrating marginal or below performance is unacceptable. Offerors shall identify all subcontractors anticipated to perform work under this contract. For each subcontractor, the offeror shall provide the subcontractor’s name, address, point of contact, phone number, the specific work items/specifications they will perform, and the percentage of work they will execute. Submit offers electronically via email to the points of contact identified in this notice. The Government does not prescribe a specific quotation format. Offerors must submit a quotation that clearly identifies the items offered and demonstrates compliance with the stated requirements. Submissions must be complete, clear, and presented in a format that allows effective evaluation by the Government. Submit all questions via email to the points of contact identified in this notice. The Government will not accept telephone inquiries. Submit offers on a firm-fixed-price basis. Prices must be all-inclusive and must cover all costs associated with providing the services, including but not limited to manufacturing, packaging, handling, transportation, duties, tariffs, fees, and any other costs. The Government may consider offers nonresponsive if they include conditional pricing, price escalation language, or statements indicating that prices are subject to adjustment based on future costs or fees. The Government intends to evaluate offers and make award without discussions; therefore, offerors should submit their best offer with initial submission. The Statement of Work and the list of applicable FAR provisions and clauses are attached to this notice.
73%
Combined Synopsis11/12/2026
COMBINED SYNOPSIS / SOLICITATION FOR COMMERCIAL SERVICES Solicitation Number: 52050PR260000524 Project Title: USCGC Hudson Capstan and Single Point Davit Inspection & Repair Issuing Agency: United States Coast Guard (USCG) – Base Miami Beach (P&C) Notice Type: Combined Synopsis / Solicitation Set-Aside Status: 100% Total Small Business Set-Aside Applicable NAICS Code: 336611 – Ship Building and Repairing Small Business Size Standard: 1,000 Employees Contract Type: Firm-Fixed-Price (FFP) Acquisition Authority: FAR Subpart 12.6, FAR Part 13 (Simplified Acquisition Procedures), and FAR Part 15 1. General Notice & Acquisition Overview This document constitutes a combined synopsis/solicitation for commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; no separate written solicitation will be issued. The solicitation is advertised as a Small Business Set-Aside only. Award will be made using simplified acquisition procedures to the responsible offeror whose proposal conforms to the solicitation requirements and represents the Lowest Price Technically Acceptable (LPTA) to the Government. 2. Key Procurement Schedule & Contacts Organized Site Visit October 06, 2026 @ 9:00 AM EST (Coordinate access and attendance via the COR) Location: USCGC Hudson, Miami Beach, FL. Email: Bryan.W.Goltz@uscg.mil Questions Deadline October 13, 2026 @ 1:00 PM EST Submit via email using the mandatory subject format below. Proposal Submission Deadline October 20, 2026 @ 1:00 PM EST Electronic submission to Ulric.Waldron@uscg.mil. Period of Performance Within 45 calendar days post-award Work to commence no later than 45 days after award date. Authorized Work Hours Mon – Fri, 0730 – 1500 (7:30 AM – 3:00 PM) No weekends or federal holidays authorized. Points of Contact Contracting & Proposal Inquiries: Ulric Waldron, Contracting Officer / Specialist Email: Ulric.Waldron@uscg.mil Mailing / Delivery Address: Commanding Officer USCG Base Miami Beach (P&C) Attn: Ulric Waldron 16001 SW 117th Avenue Miami, FL 33177 Technical & Scheduling Inquiries / Site Visit: Mr. Brian Goltz Phone: 305-535-4337 Email: Bryan.W.Goltz@uscg.mil 3. Place of Performance Vessel: USCGC Hudson Berthing Address: 100 MacArthur Causeway Miami Beach, FL 33139 4. Proposal Submission Instructions 4.1 Submission Methods & Protocols Electronic Submission (Preferred): Deliver via email to Ulric.Waldron@uscg.mil. Telephone requests for quotes will not be accepted. Mail / Hand Delivery: Must arrive at USCG Base Miami Beach (P&C), Attn: Ulric Waldron, 16001 SW 117th Avenue, Miami, FL 33177 prior to 1:00 PM EST on October 20, 2026. Formal amendments and notices of changes will be issued via SAM.gov. 4.2 Mandatory Email Subject Formatting Inquiries and proposals without the exact subject line formats may experience severe processing and response delays: Proposal Submission Subject Format: [PROPOSAL SUBMISSION] [52050PR260000524] - [USCGC Hudson Inspection & Repair] ([Company Name]) Question / Clarification Subject Format: [QUESTION SUBMISSION] [52050PR260000524] - [USCGC Hudson Inspection & Repair] ([Company Name]) (Note: Replace [Company Name] with your organization's legal name inside the parentheses). 4.3 Vendor Administrative Requirements Offerors must provide their Taxpayer Identification Number (TIN/EIN) and Unique Entity Identifier (UEI) / DUNS number. Vendors must maintain an ACTIVE registration in SAM.gov prior to the closing of this solicitation and prior to contract award. Offerors must have NAICS code 336611 registered on their SAM.gov profile to be considered eligible for award. 5. Evaluation and Basis for Award Award will be made using simplified acquisition procedures to the responsible offeror whose offer conforming to the solicitation will represent the Lowest Price Technically Acceptable (LPTA) to the Government. Evaluations will be conducted in accordance with FAR Part 13 and FAR Part 15 based on: Technical Acceptability: Demonstrated ability to fulfill all technical requirements and compliance with contract specifications. Past Performance: Verification of relevant, satisfactory performance on similar marine maintenance/repair projects. Price: Evaluated total proposed fixed price for reasonableness and completeness. 6. Applicable Clauses, Provisions, and Wage Determinations 6.1 Federal Acquisition Regulation (FAR) Clauses (Incorporated by Reference) 52.212-1 Instructions to Offerors — Commercial Items (Deviation 2018-O0018) 52.212-3 Offeror Representations and Certifications — Commercial Items 52.212-4 Contract Terms and Conditions — Commercial Items 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders — Commercial Items 52.222-41 Service Contract Labor Standards 52.222-90 In accordance with Executive Order (E.O.) 14398 Full text of FAR clauses is accessible electronically at acquisition.gov/far. 6.2 Homeland Security Acquisition Regulations (HSAR) Clauses HSAR 3052.209-70 Prohibition on Contracts with Corporate Expatriates HSAR 3052.237-72 Contracting Officer's Technical Representative (COTR) Full text of HSAR clauses is accessible electronically at dhs.gov. 6.3 Applicable Wage Determination Department of Labor Wage Determination: No. 2015-4543 (applicable revision).
73%
Combined Synopsis10/20/2026
This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ) Number 52000QR270000684. This procurement will be processed in accordance with FAR Part 12. The North American Industry Classification System (NAICS) is 336611. The small business size standard is 1300. This is a total small business set aside; all responsible small business sources may submit quotations that will be considered. This synopsis/solicitation is issued pursuant to FAR 13.106-1(b), and the resultant purchase order will be awarded on a firm-fixed price basis using simplified acquisition procedures in accordance with FAR 13. THE UNITED STATED COAST GUARD SURFACE FORCE LOGISTICS CENTER AND THE CONTRACTING PROCUREMENT OFFICE CONDUCTED BY CG SEA-C21, REQUEST THE CONTRACTORS TO PROVIDE PRICING FOR THE FOLLOWING REQUIREMENT: Intent: While the vessel is moored pier side, clean the vessel’s U/W body and (pending inspection) renew bolt-on zinc anodes (if needed). Statement of Work (SOW) Requirement Summary: SEE ATTACHED SOW FOR DETAILS. CGC FREDERICK HATCH requires Clean/Inspect/Video Underwater (U/W) Body Surfaces (renew failed zinc anodes). 3.1 DEFINITE WORK. The Contractor must: 3.1.1 SUBMIT A PRE AND POST CLEANING VIDEO. 3.1.2 CLEAN AND INSPECT UNDERWATER BODY SURFACES. 3.1.3 SUBMIT FINAL REPORT. 3.2 OPTIONAL/CONDITIONAL WORK. 3.2.1 RENEW ANODES. 2. REFERENCES *Access to some drawings may be Export-Controlled and require any recipient to be registered in the Joint Certification Program (JCP) through DLA to receive the drawing. * COAST GUARD DRAWINGS None COAST GUARD PUBLICATIONS 154-WPC MPC B10015.D rev 10/31/24 154-WPC MPC B10018.D rev 04/30/25 3. PERIOD OF PERFORMANCE (POP) The POP for the requirement shall be between 12/01/26 - 12/11/26. Specific performance dates shall be coordinated with the Government POC to accommodate operational requirements. The contractor shall be available to perform the service during the specified POP window. 4. PLACE OF PERFORMANCE The primary place of performance shall be at CGC FREDERICK HATCH located at below address: CGC FREDERICK HATCH NAVAL BASE GUAM SANTA RITA Guam 96915 USA POC: MKC Paul Kurkowski Cell: (954) 999-7208 Email: Paul.J.Kurkowski@uscg.mil 5. SECURITY REQUIREMENTS All contractor personnel requiring access to the place of performance in order to perform work under this contract must possess a valid-state issued REAL ID-compliant driver’s license or identification card, or an acceptable alternative form of identification as defined by the Department of Homeland Security (DHS) [https://www.dhs.gov/real-id]. It is the contractor’s responsibility to ensure that all personnel are properly credentialed to gain base access. Failure to comply with access requirements may result in delays to performance and will not constitute an excusable delay. -------------------------------------------------------------------------------- Interested Vendors shall provide product/service details, Product Data Sheet, Technical Approach with proposed performance schedules, and cost breakdown of CLIN 0001 and optional CLIN 0002 IAW SOW for technical review. Vendors shall provide a detailed cost breakdown to include all the specifications to be reviewed by a technical rep. NOTE: The USCG/Government reserves the right to Award on an All or None Basis, i.e., the Government may issue a Purchase Order (PO) to the offeror that submits the lowest aggregate price, rather than issue a PO to each offeror based on the lowest quotation on each item. As stated below, the provision at FAR 52.212-2- Evaluation-Commercial Products and Commercial Services-applies with the following addenda: Award of a contract will be based on the following criteria: The purchase order will be awarded as a firm-fixed price contract using simplified acquisition procedures in accordance with FAR Part 13. 1. Please provide any warranty information. 2. Vendors MUST have an active registration in www.sam.gov BASIS FOR AWARD: BEST VALUE- TRADEOFF The USCG/Government intends to award a purchase order resulting from this synopsis/solicitation to the responsible contractor whose quote conforms to the solicitation and is most advantageous and the best value to the Government, price and other factors considered. The Government will utilize the simplified evaluation procedures outlined in FAR 13.106-2. The Government may select a higher-priced proposal when the demonstrated technical advantages or reduced performance risks justify the additional cost. As proposals become more technically comparable, price may become a greater determining factor. Evaluation Factors: Technical Capability Evaluation will consider the offeror’s demonstrated understanding of the SOW, proposed inspection and performance methodology, ability to renew Government-furnished components, and approach to minor modifications necessary to ensure proper fit of optional/conditional work. Performance Risk and Schedule Evaluation will consider the feasibility and credibility of proposed performance schedules, repair lead times, resource availability, and the offeror’s ability to complete required/optional services within the established period of performance. Past Performance Evaluation will consider the recency, relevance and quality of the offeror’s past performance on contracts of similar scope, and complexity. Consideration may include quality of workmanship, schedule adherence, contract compliance, and successful completion of comparable services. Price The Government will evaluate CLIN 0001 firm-fixed pricing and CLIN 0002 estimated pricing schedules for price reasonableness and overall evaluated cost for best value. CLIN 0002 estimates are for evaluation purposes only and Do Not Guarantee that conditional work will be authorized. Please Note: Interested Offerors having the expertise as required are invited to submit a Firm Fixed Price quotation that will be considered by the agency. Firm Fixed Price Proposals shall be detailed and include information from the SOW demonstrating an understanding of all the requirements in the SOW. ACCESS TO RESTRICTED TECHNICAL DATA- DISTRIBUTION STATEMENT D *Technical Data Access: Distribution Statement D — Critical JCP Certification Required. Drawings are not publicly posted on SAM.gov. Some of the technical data associated with this solicitation is marked Distribution Statement D and is restricted to the Department of War/Department of Defense (DoW/DoD) and U.S. DoW/DoD contractors. Interested vendors requiring access to the restricted technical data must possess an active certification under the United States/Canada Joint Certification Program (JCP). Information on the JCP, including application instructions, is available on the JCP website (https://www.dla.mil/logistics-operations/services/joint-certification-program/). Upon verification of the vendor’s active JCP certification, the Government will provide the restricted technical data outside of SAM.gov. Interested vendors are responsible for obtaining and maintaining the required JCP certification and requesting access to the restricted technical data sufficiently in advance of the solicitation closing date posted in this notice. Failure to obtain access to the restricted technical data will not constitute a basis for extension of the solicitation closing date. The Government is not responsible for delays associated with obtaining JCP certification or requesting access to the restricted technical data. Quotations must be submitted on company letterhead stationery and must include the following information: (1) Cost Breakdown (CLIN 0001 consists of Definite work items with sub-clins; CLIN 0002 consists of Option/Conditional Work Item(s).) (2) Unit Cost (3) Extended Price (4) Total Price (5) Payment Terms (6) Discount offered for prompt payment (7) Company Unique Entity ID (UEI) and Cage Code. CLIN 0002- OPTIONAL/CONDITIONAL REPAIR WORK: Offerors shall submit a separate estimated pricing schedule for CLIN 0002 identifying applicable rates/percentages/prices associated with the optional/conditional work item(s) that are Government-furnished property in accordance with paragraph 1.2 in the SOW, including minor modifications necessary to ensure proper fit. CLIN 0002 may be exercised at the time of contract award; however, no conditional repair work is authorized by its inclusion. Performance of CLIN 0002 shall be contingent upon completion of the contractor's inspection and submission of a Condition Found Report (CFR) in accordance with SOW paragraphs 3.1.2 and 3.1.3. Upon identification of necessary anodes to be replaced/renewed, a Contract Change Order Request (CR-001) would be submitted identifying proposed scope of repairs, quantities, and associated costs calculated using the established CLIN 0002 pricing schedule. The Contracting Officer shall review the CFR and CR to determine the necessity, scope, and price reasonableness of the proposed work. The Government reserves the right to authorize all, part, or none of the conditional repairs. No optional/conditional work shall commence without prior written Contracting Officer authorization through an appropriate contract modification. Any deviation from the established CLIN 0002 pricing shall require separate justification and approval. Quotes must be received no later than 20 November 2026 at 10:00 A.M. Eastern Standard Time. Email quotes are acceptable and shall be sent to Tim Ford at: Timothy.S.Ford@uscg.mil and carbon copy Contracting Officer, SKC Patricia Fremming at Patrica.M.Fremming@uscg.mil . Any questions or concerns regarding any aspect of the RFQ must be forwarded to Tim Ford at email address – Timothy.S.Ford@uscg.mil carbon copy Contracting Officer, SKC Patricia Fremming via email Patrcia.M.Fremming@uscg.mil. The following FAR Clauses and Provisions apply to this acquisition: FAR 52.204-7 – System for Award Management (Nov 2024). To facilitate payment, contractors shall be registered in SAM.gov with an active Unique Entity Identifier (UEI) prior to submitting a quotation. A UEI and SAM registration can be obtained via https://www.sam.gov. FAR 52.212-1 - Instructions to Offerors – Commercial Products and Commercial Services (Sep 2023) FAR 52.212-2 - Evaluation - Commercial Products and Commercial Services (Nov 2021) Award will be made to the Offeror proposing the Best Value to the Government considering specification, price, past performance and quality. FAR 52.212-3 - Offeror Representations and Certifications - Commercial Products and Commercial Services (Oct 2025) to include Alt I (Feb 2024). Offeror shall complete annual representations and certification electronically via the System for Award Management (SAM) website accessed through https://www.sam.gov. FAR 52.212-4 - Contract Terms and Conditions - Commercial Products and Commercial Services (Nov 2023) FAR 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services (Mar 2026) FAR 52.252-2 - Clauses Incorporated by Reference (Feb 1998) The following clauses, and others as directed by the Contracting Officer as applicable, shall apply to this awarded contract: FAR 52.217-5 - Evaluation of Options FAR 52.217-4 - Evaluation of Options Exercised at Time of Contract Award FAR 52.219-6 - Notice of Total Small Business Set-Aside (Nov 2020) FAR 52.219-28 - Post-Award Small Business Program Rerepresentation (Feb 2024) FAR 52.222-3 - Convict Labor (Jun 2003) FAR 52.222-19 - Child Labor Cooperation with Authorities and Remedies (Mar 2026) (E.O.13126). FAR 52.222-35 - Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-36 - Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793). FAR 52.222-37 - Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-50 - Combating Trafficking in Persons (Oct 2025) (22 U.S.C. chapter 78 and E.O. 13627). FAR 52.225-1 - Buy American Supplies (Oct 2022) (41 U.S.C. chapter 83). (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). FAR 52.232-33 - Payment by Electronic Funds Transfer - Systems for Award Management (Oct 2018) FAR 52.233-3 - Protest After Award (Aug 1996) FAR 52.233-4 - Applicable Law for Breach of Contract Claim (Oct 2004) *The above clauses are incorporated by reference, entire clause(s) available at https://acquisition.gov. NOTICE TO OFFERORS CONCERNING REPRESENTATIONS AND CERTIFICATIONS: This solicitation contains FAR Clause 52.204-7, System for Award Management and FAR Provision 52.204-8, Annual Representations and Certifications. In accordance with FAR 4.1201 (a), prospective contractors shall complete electronic annual representations and certifications via SAM accessed through https://www.sam.gov. Please ensure completion prior to submitting a quotation. Paragraph (b) of FAR 52.204-8 applies. System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Examples include 52.222-25, Affirmative Action Compliance, and paragraph (d) of 52.212-3, Offeror Representations and Certifications—Commercial Products and Commercial Services. Additional examples include 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services, and 52.213-4, Terms and Conditions—Simplified Acquisitions (Other Than Commercial Products and Commercial Services).
72%
Combined Synopsis11/20/2026
This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quotation (RFQ) Number 52000QR270000255. This procurement will be processed in accordance with FAR Part 12. The North American Industry Classification System (NAICS) is 336611. The small business size standard is 1300. This is a total small business set aside; all responsible small business sources may submit quotations that will be considered. This synopsis/solicitation is issued pursuant to FAR 13.106-1(b), and the resultant purchase order will be awarded on a firm-fixed price basis using simplified acquisition procedures in accordance with FAR 13. THE UNITED STATED COAST GUARD SURFACE FORCE LOGISTICS CENTER REQUEST THE CONTRACTORS TO PROVIDE PRICING FOR THE FOLLOWING REQUIREMENT: Sewage piping repairs aboard CGC Terrell Horne A. REQUIREMENT: 1. The contractor shall provide renewal of damaged piping and associated work IAW SOW. 2. LOCATION OF PERFORMANCE CGC TERRELL HORNE 1001 S Seaside Ave San Pedro, CA 90731 3. REQUIRED PERIOD OF PERFORMANCE: 01 DEC – 11 DEC 2026 Interested Vendors shall provide product/service details, Product Data Sheet, and cost breakdown IAW SOW for technical review. Vendors shall provide a detailed cost breakdown to include all the specifications to be reviewed by a technical rep. NOTE: The USCG/Government reserves the right to Award on an All or None Basis, i.e., the Government may issue a Purchase Order (PO) to the offeror that submits the lowest aggregate price, rather than issue a PO to each offeror based on the lowest quotation on each item. As stated below, the provision at FAR 52.212-2- Evaluation-Commercial Products and Commercial Services-applies with the following addenda: Award of a contract will be based on the following criteria: The purchase order will be awarded as a firm-fixed price contract using simplified acquisition procedures in accordance with FAR Part 13. 1. Please provide any warranty information. 2. Vendors MUST have an active registration in www.sam.gov The USCG/Government intends to award a purchase order resulting from this synopsis/solicitation to the responsible contractor whose quote conforms to the solicitation and is most advantageous and the best value to the Government, price and other factors considered. The Government will utilize the simplified evaluation procedures outlined in FAR 13.106-2. Please Note: Interested Offerors having the expertise as required are invited to submit a Firm Fixed Price quotation that will be considered by the agency. Quotations must be submitted on company letterhead stationery and must include the following information: (1) Cost Breakdown (2) Unit Cost (3) Extended Price (4) Total Price (5) Payment Terms (6) Discount offered for prompt payment (7) Company Unique Entity ID (UEI) and Cage Code. Quotes must be received no later than 19 November 2026 at 10 A.M. Eastern Standard Time. Email quotes are acceptable and shall be sent to Ms. Nichole Cundiff at: Nichole.A.Cundiff@uscg.mil and carbon copy Contracting Officer, CWO2 Sean Hoy at Sean.W.Hoy@uscg.mil. Any questions or concerns regarding any aspect of the RFQ must be forwarded to Ms. Nichole Cundiff at email address – Nichole.A.Cundiff@uscg.mil and carbon copy Contracting Officer, SKC Karla P. Balint via email Sean.W.Hoy@uscg.mil. The following FAR Clauses and Provisions apply to this acquisition: FAR 52.204-7 – System for Award Management (Nov 2024). To facilitate payment, contractors shall be registered in SAM.gov with an active Unique Entity Identifier (UEI) prior to submitting a quotation. A UEI and SAM registration can be obtained via https://www.sam.gov. FAR 52.212-1 - Instructions to Offerors – Commercial Products and Commercial Services (Sep 2023) FAR 52.212-2 - Evaluation - Commercial Products and Commercial Services (Nov 2021) Award will be made to the Offeror proposing the Best Value to the Government considering specification, price, past performance and quality. FAR 52.212-3 - Offeror Representations and Certifications - Commercial Products and Commercial Services (Oct 2025) to include Alt I (Feb 2024). Offeror shall complete annual representations and certification electronically via the System for Award Management (SAM) website accessed through https://www.sam.gov. FAR 52.212-4 - Contract Terms and Conditions - Commercial Products and Commercial Services (Nov 2023) FAR 52.212-5 - Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services (Mar 2026) FAR 52.252-2 - Clauses Incorporated by Reference (Feb 1998) The following clauses, and others as directed by the Contracting Officer as applicable, shall apply to this awarded contract: FAR 52.219-6 - Notice of Total Small Business Set-Aside (Nov 2020) FAR 52.219-28 - Post-Award Small Business Program Representation (Feb 2024) FAR 52.222-3 - Convict Labor (Jun 2003) FAR 52.222-19 - Child Labor Cooperation with Authorities and Remedies (Mar 2026) (E.O.13126). FAR 52.222-35 - Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-36 - Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793). FAR 52.222-37 - Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212). FAR 52.222-50 - Combating Trafficking in Persons (Oct 2025) (22 U.S.C. chapter 78 and E.O. 13627). FAR 52.225-1 - Buy American Supplies (Oct 2022) (41 U.S.C. chapter 83). (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). FAR 52.232-33 - Payment by Electronic Funds Transfer - Systems for Award Management (Oct 2018) FAR 52.233-3 - Protest After Award (Aug 1996) FAR 52.233-4 - Applicable Law for Breach of Contract Claim (Oct 2004) *The above clauses are incorporated by reference, entire clause(s) available at https://acquisition.gov. NOTICE TO OFFERORS CONCERNING REPRESENTATIONS AND CERTIFICATIONS: This solicitation contains FAR Clause 52.204-7, System for Award Management and FAR Provision 52.204-8, Annual Representations and Certifications. In accordance with FAR 4.1201 (a), prospective contractors shall complete electronic annual representations and certifications via SAM accessed through https://www.sam.gov. Please ensure completion prior to submitting a quotation. Paragraph (b) of FAR 52.204-8 applies. System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Examples include 52.222-25, Affirmative Action Compliance, and paragraph (d) of 52.212-3, Offeror Representations and Certifications—Commercial Products and Commercial Services. Additional examples include 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services, and 52.213-4, Terms and Conditions—Simplified Acquisitions (Other Than Commercial Products and Commercial Services).
69%
Combined Synopsis11/19/2026

Additional Details

Solicitation Number

70Z08522Q39006B00

Archive Date

Jan 4, 2022

Office Address

ALAMEDA, CA, 94501