GovChime
Notice ID: e64c2b0ecce34579a8454b3e75ec36c3Combined Synopsis/Solicitation

USCGC WALNUT DS FY 24

Archived on November 7, 2023. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
8:00 AM UTC−07:00
Posted
October 16, 2023
Notice type
Combined Synopsis/Solicitation
Set-aside
Small Business Set Aside - Total
NAICS
336611: Ship Building and Repairing
Agency
Department of Homeland SecurityUS COAST GUARD

Notice details

Office
SFLC PROCUREMENT BRANCH 2(00085)
Place of performance
Pensacola, 32508
Last updated
Sep 25, 2026

Identifiers

Solicitation number
70Z08523RIBCT0009
Notice ID
e64c2b0ecce34579a8454b3e75ec36c3

Description

1. This requirement will be competed as 100% Small Business Set-aside. Award from this solicitation will be made to the responsible offeror whose proposal conforms to all the submission requirements outlined in the instructions to offerors and is determined to provide the best value to the Government, which will evaluate the price and non?cost factors. Technical and past performance factors when combined, are more importance than price. Under Best Value, the Government may accept other than the lowest priced proposal if the perceived benefit warrants the additional price. Per FAR Part 2, Best value is defined as "the expected outcome of an acquisition that, in the Government's estimation, provides the greatest overall benefit in response to the requirement." a. All offerors shall provide a written statement that all repair work done in accordance with the terms, conditions, and attachments to this solicitation are under a minimum of a 60-day warranty. Failure to provide a warranty statement may result in the proposal not being considered for award. b. All offerors shall fully comply with terms and conditions of the RFP and address all solicitation requirements to be eligible for award. The solicitation document must be completed in its entirety in order to be compliant with the full solicitation. Offerors that take exception to any term or condition of this RFP, propose any additional term or condition, or omit any required information may not be considered for award. 2. Completing the RFP: Please ensure the following information/sections are completed in their entirety: a. Page 1 blocks 17a, 26 (TOTAL OFFER AMOUNT), 30a, 30b and 30c. b. Complete all clauses requiring vendor certifications or information. c. CLIN prices shall be in U.S. Dollars (inclusive of all costs, applicable taxes, and all relevant charges) d. Provide required certifications and documents, per paragraph 3 (below) e. Written statement of 60-day warranty Please read the RFP and all attachments in their entirety. 3. Technical Requirements As stated in the Work Specification Document, a technically compliant vendor must submit: a. List of Subcontractors, work items involved, and work site addresses b. Welders Qualifications, including welder's name, type of qualifications, and date of last qualification test c. Written description of Property Control System for GFP d. List of NFPA certified Chemists e. Designation of Competent Person f. List of Qualified Sil-brazers 4. Past performance a. All offerors must provide two (2) instances of relevant past performance performed within the last three (3) years. This information shall include, but is not limited to: i. Contract Number, Date of Contract Award, and Period of Performance ii. Contact Information for Customer iii. Contract Description iv. Relevant Information 5. To be considered complete, an offer must adhere to the proposal requirements as well as paragraphs 2 and 3, above. A complete proposal shall include a detailed description of the vendor's understanding and plan for compliance with the Specification for dockside repairs. 6. The Contracting Officer plans to make an award without discussions. Therefore, the offer should be complete as submitted, include the offerors best price, and shall not include references to data or information previously submitted. Data previously submitted, if any, will not be incorporated "by reference" into the offer and will not be considered in the evaluation of the offer. 7. Clarifications/Questions regarding any aspect of this procurement shall be submitted in writing per ATTACHMENT 4 via email only and addressed to Ou.T.Saephanh@uscg.mil and Erin.A.Olenjack@uscg.mil no later than 8 AM PST on October 6, 2023. Phone calls will not be accepted. The subject line of all email correspondence must state RFP#70Z08524RIBCT0009 QUESTIONS in the subject line. All questions and responses will be posted via email and on SAM.gov for all potential offerors to review. Any revision to the RFP as a result of questions and answers will be issued as an amendment to the solicitation. Questions received after this deadline may not be considered. 8. Request for Drawings: The last day to request drawings regarding this solicitation is 8 AM PST on October 9, 2023. After this date, further requests may not be accepted due to time constraints. To request drawings, contact Ou.T.Saephanh@uscg.mil and Erin.A.Olenjack@uscg.mil. All requests should identify the solicitation number RFP#70Z08523RIBCT0009. Some references listed in the Specification, under "Consolidated List of References," are subject to Export Control limitations or have otherwise restricted distribution and have been deemed "limited access" and "export controlled" packages. In order to access these documents, vendors must be certified as a US or Canadian contractor by the Joint Certification Program (JCP) administered by the Defense Logistic Information Service (DLIS). Instructions and procedures for being certified by JCP can be found at https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/. Only those vendors that have current certification by JCP will be able to be granted explicit access to these packages by the USCG. 9. Responses to this solicitation shall be submitted in writing via email only and addressed to Ou.T.Saephanh@uscg.mil and Erin.A.Olenjack@uscg.mil no later than 8 AM PST on October 23, 2023. Phone calls will not be accepted. The subject line of all email correspondence must state RFP#70Z08523RIBCT0009 in the subject line. Proposals received after the deadline may not be considered. ANTICIPATED AWARD DATE: The anticipated date of award is on or about December 9, 2023.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

Solicitation:70Z08523RIBCT0009
  1. Combined Synopsis
  1. 2×
    Combined SynopsisCurrentSep 18, 2023

    USCGC WALNUT DS FY 24

    Notice e64c2b0ecce34579a8454b3e75ec36c3 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-Market Research11/12/2026
This is a combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Class Deviation 25-21, Rev 1 subpart 12, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 70ZU0127QPBPL0001 is issued as a Request for Quotations (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2026- 01 effective 13 March 2026; Department of Homeland Security Acquisition Regulation (HSAR) effective 26 December 2024; Homeland Security Acquisition Manual (HSAM) 2026-04 effective 30 June 2026; Coast Guard Acquisition Procedures (CGAP) 2026-01 effective 25 March 2026.
-Combined Synopsis11/09/2026
COMBINED SYNOPSIS / SOLICITATION FOR COMMERCIAL SERVICES Solicitation Number: 52050PR260000524 Project Title: USCGC Hudson Capstan and Single Point Davit Inspection & Repair Issuing Agency: United States Coast Guard (USCG) – Base Miami Beach (P&C) Notice Type: Combined Synopsis / Solicitation Set-Aside Status: 100% Total Small Business Set-Aside Applicable NAICS Code: 336611 – Ship Building and Repairing Small Business Size Standard: 1,000 Employees Contract Type: Firm-Fixed-Price (FFP) Acquisition Authority: FAR Subpart 12.6, FAR Part 13 (Simplified Acquisition Procedures), and FAR Part 15 1. General Notice & Acquisition Overview This document constitutes a combined synopsis/solicitation for commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; no separate written solicitation will be issued. The solicitation is advertised as a Small Business Set-Aside only. Award will be made using simplified acquisition procedures to the responsible offeror whose proposal conforms to the solicitation requirements and represents the Lowest Price Technically Acceptable (LPTA) to the Government. 2. Key Procurement Schedule & Contacts Organized Site Visit October 06, 2026 @ 9:00 AM EST (Coordinate access and attendance via the COR) Location: USCGC Hudson, Miami Beach, FL. Email: Bryan.W.Goltz@uscg.mil Questions Deadline October 13, 2026 @ 1:00 PM EST Submit via email using the mandatory subject format below. Proposal Submission Deadline October 20, 2026 @ 1:00 PM EST Electronic submission to Ulric.Waldron@uscg.mil. Period of Performance Within 45 calendar days post-award Work to commence no later than 45 days after award date. Authorized Work Hours Mon – Fri, 0730 – 1500 (7:30 AM – 3:00 PM) No weekends or federal holidays authorized. Points of Contact Contracting & Proposal Inquiries: Ulric Waldron, Contracting Officer / Specialist Email: Ulric.Waldron@uscg.mil Mailing / Delivery Address: Commanding Officer USCG Base Miami Beach (P&C) Attn: Ulric Waldron 16001 SW 117th Avenue Miami, FL 33177 Technical & Scheduling Inquiries / Site Visit: Mr. Brian Goltz Phone: 305-535-4337 Email: Bryan.W.Goltz@uscg.mil 3. Place of Performance Vessel: USCGC Hudson Berthing Address: 100 MacArthur Causeway Miami Beach, FL 33139 4. Proposal Submission Instructions 4.1 Submission Methods & Protocols Electronic Submission (Preferred): Deliver via email to Ulric.Waldron@uscg.mil. Telephone requests for quotes will not be accepted. Mail / Hand Delivery: Must arrive at USCG Base Miami Beach (P&C), Attn: Ulric Waldron, 16001 SW 117th Avenue, Miami, FL 33177 prior to 1:00 PM EST on October 20, 2026. Formal amendments and notices of changes will be issued via SAM.gov. 4.2 Mandatory Email Subject Formatting Inquiries and proposals without the exact subject line formats may experience severe processing and response delays: Proposal Submission Subject Format: [PROPOSAL SUBMISSION] [52050PR260000524] - [USCGC Hudson Inspection & Repair] ([Company Name]) Question / Clarification Subject Format: [QUESTION SUBMISSION] [52050PR260000524] - [USCGC Hudson Inspection & Repair] ([Company Name]) (Note: Replace [Company Name] with your organization's legal name inside the parentheses). 4.3 Vendor Administrative Requirements Offerors must provide their Taxpayer Identification Number (TIN/EIN) and Unique Entity Identifier (UEI) / DUNS number. Vendors must maintain an ACTIVE registration in SAM.gov prior to the closing of this solicitation and prior to contract award. Offerors must have NAICS code 336611 registered on their SAM.gov profile to be considered eligible for award. 5. Evaluation and Basis for Award Award will be made using simplified acquisition procedures to the responsible offeror whose offer conforming to the solicitation will represent the Lowest Price Technically Acceptable (LPTA) to the Government. Evaluations will be conducted in accordance with FAR Part 13 and FAR Part 15 based on: Technical Acceptability: Demonstrated ability to fulfill all technical requirements and compliance with contract specifications. Past Performance: Verification of relevant, satisfactory performance on similar marine maintenance/repair projects. Price: Evaluated total proposed fixed price for reasonableness and completeness. 6. Applicable Clauses, Provisions, and Wage Determinations 6.1 Federal Acquisition Regulation (FAR) Clauses (Incorporated by Reference) 52.212-1 Instructions to Offerors — Commercial Items (Deviation 2018-O0018) 52.212-3 Offeror Representations and Certifications — Commercial Items 52.212-4 Contract Terms and Conditions — Commercial Items 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders — Commercial Items 52.222-41 Service Contract Labor Standards 52.222-90 In accordance with Executive Order (E.O.) 14398 Full text of FAR clauses is accessible electronically at acquisition.gov/far. 6.2 Homeland Security Acquisition Regulations (HSAR) Clauses HSAR 3052.209-70 Prohibition on Contracts with Corporate Expatriates HSAR 3052.237-72 Contracting Officer's Technical Representative (COTR) Full text of HSAR clauses is accessible electronically at dhs.gov. 6.3 Applicable Wage Determination Department of Labor Wage Determination: No. 2015-4543 (applicable revision).
-Combined Synopsis10/20/2026
-AwardedOpen
SOURCES SOUGHT NOTICE USCGC DILIGENCE (WMEC 616) DRYDOCK REPAIRS FY27 70ZU0127DILIGENCEDDL This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, CG-SEA-C21 Norfolk, VA to identify sources capable of providing the following: DRYDOCK REPAIRS SPECIFICATION: (Subject to change at the discretion of the Government). Contractor shall provide all necessary facilities, materials, equipment, and personnel to perform Drydock Repairs to the U.S. Coast Guard Cutter (USCGC) DILIGENCE (WMEC 616), a 210-foot A-Class, Medium Endurance Cutter. The vessel is home ported in Pensacola, FL. All work will be performed at the contractor’s facility. There is no geographical restriction for this cutter. SCOPE OF WORK: The scope of the acquisition is for the Drydock Repairs of the USCGC DILIGENCE (WMEC 616). This work will include, but is not limited to the following Work Items: WORK ITEM 1: Hull Plating, U/W Body, Ultrasonic Testing WORK ITEM 2: U/W Body, Preserve, 100 percent WORK ITEM 3: Appendages (U/W), Preserve (Internal) and Leak Test WORK ITEM 4: Propulsion Shaft Fairwaters And Rope Guards, Inspect WORK ITEM 5: Voids (Non-Accessible), Preserve (Internal) and Leak Test WORK ITEM 6: Propulsion Shafting, Strain Gauge Alignment, Drydock, Check WORK ITEM 7: Propulsion Shafting; Remove, Inspect, and Reinstall WORK ITEM 8: Propulsion Intermediate Shafts; Remove, Inspect, and Reinstall WORK ITEM 9: Propulsion Shaft Coating, Renew WORK ITEM 10: Propulsion Shafting, Straighten (Optional) WORK ITEM 11: Propeller Shaft Sleeves, Renew WORK ITEM 12: Propulsion Shafting, Optical or Laser Alignment Check (Optional) WORK ITEM 13: Propulsion Shaft Seal (Mechanical And Inflatable) Assemblies, Inspect And Repair Or Renew WORK ITEM 14: Propulsion Shaft Bearings, External, Renew WORK ITEM 15: Stern Tube Interior Surfaces, Preserve, 100 Percent WORK ITEM 16: Controllable Pitch Propellers, Clean and Inspect WORK ITEM 17: Controllable Pitch Propeller (CPP) System, Inspect and Service WORK ITEM 18: Controllable Pitch Propeller (CPP) Hubs, Renew (Optional) WORK ITEM 19: Controllable Pitch Propeller (CPP) Hubs, Inspect (Optional) WORK ITEM 20: Fathometer Transducer, Renew WORK ITEM 21: Fathometer Transducer, General Maintenance (Optional) WORK ITEM 22: Doppler Speed Log Transducer, Clean and Inspect WORK ITEM 23: Sea Valves and Waster Pieces, Overhaul Or Renew WORK ITEM 24: Sea Strainers, Duplex, All Sizes, Overhaul WORK ITEM 25: Rudder Assembly, Remove, Inspect And Reinstall WORK ITEM 26: Tanks, MP Fuel Storage and Overflow, Preserve 100 Percent WORK ITEM 27: Cathodic Protection, Zinc Anodes, Renew WORK ITEM 28: Drydock WORK ITEM 29: Temporary Services, Provide - Cutter WORK ITEM 30: Reverse Osmosis Foundation, Renew WORK ITEM 31: MSD Space, Deck and Bilge, Preservation WORK ITEM 32: Pilot House Coaming, Renew WORK ITEM 33: Structural Plating, 03 Deck & Foundations, Renew WORK ITEM 34: Centerline Vertical Keel, Renew WORK ITEM 35: Potable Water Tank Plate, Renew WORK ITEM 36: Tanks, Dirty Oil and Waste, Preserve, 100 Percent & Partial Renew WORK ITEM 37: Scullery Deck Plating, Renew WORK ITEM 38: Fuel Manifold, Overhaul WORK ITEM 39: Hull and Structural Plating, Steel Plate, Renew (Optional) ANTICIPATED PERIOD OF PERFORMANCE: The period of performance is anticipated to be for 70 calendar days with a start date of April 14, 2027, and end date of June 22, 2027. (Subject to change at the discretion of the Government) ANTICIPATED NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,300 employees. SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to Petal.C.Donald@uscg.mil no later than Thursday, November 12, 2026, at 12:00 pm Eastern Standard Time (EST) with the following information/documentation: 1. Name of Company, Address and Unique Entity ID. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HUBZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern(SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern 4. Documentation Verifying Small Business Certification: a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA. b. If claiming HUBZone status, provide a copy of your HUBZone Certificate from SBA. c. If claiming SDVOSBC status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611. d. If claiming VOSBC status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611. e. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are “economically disadvantaged”, and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million f. If claiming Woman Owned Small Business status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611. g. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611. 5. Statement of Proposal Submission: Statement on how your company will do the work and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant. SAM: Interested parties should register in the System for Award Management (SAM), formerly known as Central Contractor Registration (CCR), as prescribed in FAR Clause 52.232-33. SAM can be obtained by accessing the internet at www.sam.gov or by calling 1-866-606-8220. Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when deciding on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriate for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. Currently no solicitation exists; therefore, Do Not Request a Copy of the Solicitation. After a review of the responses received, a combined synopsis/solicitation may be published on the Government Point of Entry (SAM.gov). It is the potential offeror's responsibility to monitor SAM.gov for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.
-Market Research11/12/2026

Additional Details

Solicitation Number

70Z08523RIBCT0009

Archive Date

Nov 7, 2023

Office Address

ALAMEDA, CA, 94501