GovChime
Notice ID: f987d3578f354c678eea2cb250f4b1b6Combined Synopsis/SolicitationArchived

USCGC Bertholf Turbine CPU and Install

Archived on February 27, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
8:00 AM PST
Posted
February 10, 2026
Notice type
Combined Synopsis/Solicitation
Set-aside
Partial Small Business Set-Aside (FAR 19.5)
NAICS
336611: Ship Building and Repairing
Agency
Department of Homeland SecurityUS COAST GUARD

Notice details

Office
SFLC PROCUREMENT BRANCH 2(00085)
Place of performance
Alameda, California, 94501
Last updated
Nov 4, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
70Z08526Q0003430
Notice ID
f987d3578f354c678eea2cb250f4b1b6

Description

 

THIS HAS BEEN AWARD VIA JOTFOC THIS IS FOR INFORMATIONAL PURPOSES ONLY.

TECHNICAL SERVICES TO REPAIR WOODWARD MicroNet NT CPU (PN 5466-409)

Background.  CGC BERTHOLF is usable to start the Main Gas Turbine.  While steaming at HP7 on the GT, a Micronet System Faulty (PV131047) alarm appeared on MCS-5 as well as a Hardware Chassis A Fan Fault on the GT Woodward panel. GT operation was not hindered. After securing the GT,  MCMS alarmed with a GT Engine Control System (ECS) hardware fault prohibiting water wash from being completed. SF installed three new fans above the Micronet CPU and I/O cards and conducted a reset of the system IAW Woodward Operating Instructions from B91358OI.C with positive results. Again, while steaming in GT mode at HP5 the same sequence of alarms populated. After performing a CPU reset the ECS hardware fault did not clear and the GT is currently unable to start or motor. SF identified ECS alarm code to be "TRBL 20" in TP B91358OI.C, but no further troubleshooting steps are annotated in the manual. Request Woodward tech for CPU inspection and troubleshooting.

  1. Scope. 1 FS Engineer for two (4) ten (10) hour travel days and two (4) ten (10) hour days on two separate site visits for following:
  • MicroNet NT CPU (PN 5466-409) inspection and troubleshooting.
  • Provide new CPU 6466-1035.
  • Perform CPU upgrade to Micro Net Plus CPU 5466-1035. This would include uploading new GAP software compatible with new CPU.

  1. Tasks. The contractor shall:
  • Provide all technical and all proprietary data to troubleshoot and repair the CPU (PN 5466-409).  
  • Provide new CPU 6466-1035. Delivered to the address below (Estimated lead time of 6 weeks).
  • Upgrade to Micro Net Plus on cutter.
  • Provide field report within 5 working days of visits.

  1. Delivery. Deliver Parts to:

USCGC BERTHOLF

ATTN: SFLC LRE AMS

1 Eagle RD

Alameda CA 94501

  1. Place of performance-

1St Visit: 5 Calle la Puntilla, San Juan, PR, 00901

2nd Visit: TBD when part is on hand. Coordinate with POC listed.

  1. Period of performance- 1ST Visit: 21FEB2026- 22FEB2026

         2nd Visit: TBD

  1. Points of Contact.
  1. USCG-SFLC-LRE PL Asset Management: CWO Matthew Temple, matthew.temple@uscg.mil, (510) 460-8195
  2. USCG-SFLC-LRE PL Asset Management: MKCM Armando Parez, Armando.Perez@uscg.mil, (571) 607-1558

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (1)

  • BERTHOLF SOW.pdf

    651 KBAdded in Combined Synopsis/Solicitation version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Combined Synopsis/SolicitationArchivedCurrent

    USCGC Bertholf Turbine CPU and Install

    Notice f987d3578f354c678eea2cb250f4b1b6 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

70Z08526Q0003430

Archive Date

Feb 27, 2026

Office Address

ALAMEDA, CA, 94501