Heater, Water Electric
Archived on September 25, 2026. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 1:00 PM EDT
- Posted
- September 1, 2026
- Notice type
- Solicitation
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 332410: Power Boiler and Heat Exchanger Manufacturing
- Agency
- Department of Homeland SecurityUS COAST GUARD
Notice details
- Office
- SFLC PROCUREMENT BRANCH 2(00085)
- Place of performance
- Curtis Bay, Maryland, 21226
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 70Z08526Q40203B00
- Notice ID
- c10866469bfc465991b19911f8f9d318
Description
This is a Brand Name Only solicitation. No substitutions will be authorized. Interested vendors must be an authorized distributor for the requested material and are required to provide an authorized distributor letter from the Original Equipment Manufacturer (OEM) with their quotation.
For all inquiries FOR EQUIPMENT AND PACKAGING, please contact:
POC: MICHAEL MOONEY
E-MAIL: MICHAEL.P.MOONEY1@USCG.MIL
PH: 571-607-6027
Line Item Details
LINE ITEM 1
NSN: 4520 01-658-3339
DESCRIPTION: HEATER,WATER,ELECTRIC
MFG NAME: ELECTRIC HEATER COMPANY
PART NBR: MSH90-0-24CNT4
QUANTITY: 1
UNIT PRICE:
$____________________
PACKAGING AND MARKING REQUIREMENTS:
[ELECTRIC HOT WATER HEATER, MODEL MSH90-0-24CNT4 PER HUBBELL DRAWING 94-6151-T&W MSH90-0-24CN. 90 GALLON 90/10 COPPER NICKEL VESSEL; 24 KW, 480 VOLT, 3 PHASE;
THERMOMETER; LOW WATER CUT OFF; ON/OFF SWITCH
MARINE TYPE PACKAGED HUBBELL ELECTRIC WATER HEATER WITH HEAVY DUTY STORAGE VESSEL
THAT IS ASME STAMPED AND REGISTERED WITH THE NATIONAL BOARD OF BOILER AND PRESSURE
VESSEL INSPECTORS. WATER HEATER PACKAGE IS ABS CERTIFIED/APPROVED AND IN
CONFORMANCE WITH USCG. UNIT IS SPECIFICALLY DESIGNED AND CONSTRUCTED FOR SHIPBOARD
INSTALLATION INCLUDING BOTH DECK AND BULKHEAD MOUNTING SUPPORTS. COMPLETE WITH ALL
ELECTRICAL OPERATING CONTROLS INCLUDING THE FOLLOWING: POWER DISTRIBUTION BLOCK,
MAGNETIC CONTACTOR(S), POWER CIRCUIT FUSING, IMMERSION HEATING ELEMENTS(S), FUSED
LOW VOLTAGE CONTROL CIRCUIT TRANSFORMER, IMMERSION THERMOSTAT, SAFETY HI-TEMPERATURE
CUT OUT, SAFETY DOOR INTERLOCK SWITCH, AND AN ASME RATED COMBINATION TEMPERATURE AND
PRESSURE RELIEF VALVE. UNIT IS FACTORY ASSEMBLED, INSULATED, JACKETED, PAINTED,
WIRED AND TESTED. UNIT IS READY FOR ELECTRICAL AND PLUMBING SERVICE CONNECTIONS.
SPECIAL PRESERVATION AND PACKAGING IS REQUIRED TO ALLOW THE WATER HEATERS TO
WITHSTAND MULTIPLE SHIPMENTS AND WAREHOUSE STORAGE FOR A PERIOD OF UP TO TWO YEARS.
EACH HEATER SHALL BE PRESERVED IN ACCORDANCE WITH MIL-STD-2073-1E (2015) METHOD 51
OR 52, AND PACKED IN A WOOD CRATE IAW MIL-C-104C, TYPE II, CLASS 1 OR 2, STYLE A.
CONTACT THE PURCHASING AGENT IF AN ALTERNATIVE PRESERVATION AND PACKING METHOD IS
PROPOSED.
MARK IAW MIL-STD-129R, EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39.
SYMBOLOGY.
PACKAGE LABEL:
ITEM NAME:
PART NUMBER:
NSN:
QNTY: (EXAMPLE 1 EA)
COND-A
CONTRACT NUMBER / ORDER NUMBER.]
Delivery Information
REQUIRED DELIVERY DATE:
[10/30/26]
ALTERNATE DELIVERY DATE:
If you are unable to meet the required date, please provide your earliest date: _______
- Total cost must include all delivery and freight charges.
- SHIPPING TERMS: FOB Destination is required.
SHIP TO ADDRESS:
[ USCG SURFACE FORCES LOGISTICS CENTER
2401 HAWKINS POINT ROAD
RECEIVING ROOM- BUILDING 88
BALTIMORE, MD 21226 ]
Preparation for Delivery & Invoicing
Preparation for Delivery
All material must be shipped to the address specified above and be accompanied by an itemized packing list securely attached to the outside of the shipment, citing the Purchase Order Number. Material shall be packed to afford adequate protection against corrosion, deterioration, and physical damage during shipment and for warehouse storage. Deliveries are accepted [Monday through Friday] between the hours of [0800 to 1500].
U.S. Government Approved Label Requirements:
- National Stock Number (NSN)
- Item Name
- Part Number
- Purchase Order Number
- Condition Code (e.g., Condition A)
- Quantity and Unit of Issue
Invoicing in Invoice Processing Platform (IPP)
All invoices must be submitted for payment through the IPP at https://www.ipp.gov. Invoices must contain the contract number, invoice number, vendor UEI, TIN, CAGE code, line item numbers, description of supplies, unit prices, and extended totals. For assistance with IPP, please contact IPP Customer Support at (866) 973-3131 or IPPCustomerSupport@fiscal.treasury.gov.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Lifecycle
- 3Version 3SolicitationArchivedCurrent
Heater, Water Electric
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Combined Synopsis/Solicitation for Commercial Items This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a separate written solicitation will not be issued. This solicitation document and the incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01, effective date 03/13/2026. It is anticipated that a competitive, firm-fixed-price purchase order will be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, which, if timely received, shall be considered by this agency. Vendors must have an active registration in SAM.gov prior to award. Payments will be made Net 30 in accordance with FAR 52.232-25, Prompt Payment. This is a Brand Name Only solicitation. No substitutions will be authorized. Interested vendors must be an authorized distributor/reseller for the requested material and are required to provide an authorized distributor/reseller letter from the Original Equipment Manufacturer (OEM) with their quotation. The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items: Line Item Details LINE ITEM 1 NSN: 4420-01-F09-1477 DESCRIPTION: HEAT EXCHANGER MFG NAME: STANDARD XCHANGE PART NBR: 5-492-23-008-001 QUANTITY: 10 EA UNIT PRICE: $____________________ TOTAL PRICE (Shipping Included): $____________________ PACKAGING AND MARKING REQUIREMENTS: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10, CUSHIONED IN A DOUBLE LAYER OF 3/4 IN BUBBLE WRAP AND PACKED IN AN APPROPRIATELY SIZED ASTM-D6251 TYPE III, CLASS 1 WOOD-CLEATED PANELBOARD SHIPPING BOX OR ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED WOODEN BOX. PACKAGE LABEL: ITEM NAME: PART NUMBER: NSN: QNTY: (EXAMPLE 1 EA) COND-A CONTRACT NUMBER / ORDER NUMBER MARK IAW MIL-STD-129P, BAR CODE IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY. POC: KEVIN RECKARD E-MAIL: KEVIN.L.RECKARD@USCG.MIL PH: 571-607-6027 Delivery Information REQUIRED DELIVERY DATE: 12/14/2026 ALTERNATE DELIVERY DATE: If you are unable to meet the required date, please provide your earliest date: _______ Total cost must include all delivery and freight charges. SHIPPING TERMS: FOB Destination is required. SHIP TO ADDRESS: [Insert Full Ship-To Address, including building, receiving room, city, state, and zip code] Preparation for Delivery & Invoicing Preparation for Delivery All material must be shipped to the address specified above and be accompanied by an itemized packing list securely attached to the outside of the shipment, citing the Purchase Order Number. Material shall be packed to afford adequate protection against corrosion, deterioration, and physical damage during shipment and for warehouse storage. Deliveries are accepted [Insert Delivery Days, e.g., Monday through Friday] between the hours of [Insert Delivery Hours, e.g., 0800 to 1500]. U.S. Government Approved Label Requirements: National Stock Number (NSN) Item Name Part Number Purchase Order Number Condition Code (e.g., Condition A) Quantity and Unit of Issue Invoicing in Invoice Processing Platform (IPP) All invoices must be submitted for payment through the IPP at https://www.ipp.gov. Invoices must contain the contract number, invoice number, vendor UEI, TIN, CAGE code, line item numbers, description of supplies, unit prices, and extended totals. For assistance with IPP, please contact IPP Customer Support at (866) 973-3131 or IPPCustomerSupport@fiscal.treasury.gov. | - | Solicitation | 11/12/2026 |
This is a combined synopsis/solicitation for commercial items prepared in accordance with the FAR Overhaul Part 12 and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Offers are being requested, and a separate written solicitation will not be issued. Solicitation 70ZU0127QBRO022 is issued as a Request for Quotation (RFQ) This solicitation incorporates provisions and clauses by reference. Full text of provisions and clauses may be accessed electronically at www.acquisition.gov. This acquisition is set-aside for small business concerns. This acquisition is Brand Name Mandatory. Brand name part is mandatory to be considered for award. The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order. No down payments or advanced payments will be made to the awarded vendor. Award will be made on a Best Value Basis as result of this synopsis/solicitation. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency. Best Value will be evaluated by who meets all technical requirements, who meets our required time frame and by price. All quotes shall be emailed to Amanda Wood via Amanda.M.Wood@uscg.mil and shall be received no later than 12 NOV 26 at 10:00 am (eastern). All emails quotes shall have 70ZU0127QBRO022 in subject of email. Item 1) NSN: 4010-01-644-5059 WIRE ROPE ASSEMBLY, SINGLE LEG 3/16" DIAMETER, GRADE 316 7X19 STAINLESS STEEL WIRE ROPE ASSEMBLY, 60' IN LENGTH. ONE END WILL HAVE A STAINLESS STEEL SWIVEL HOOK WITH SAFETY LATCH ON ONE END AND A STAINLESS STEEL SWAGED BALL ON THE OTHER. ASSEMBLY WILL BE LOAD TESTED AND DOCUMENTATION WILL BE SHIP WITH THE ASSEMBLY AS PER THERN MANUF. MFG: THERN INC. PN: WSS19-60NS-P QTY: 42 EA INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10, CUSHIONED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 DOUBLE-WALL FIBERBOARD BOX. FAILURE TO MEET THE PACKING, PACKAGING, MARKING AND BAR-CODING REQUIREMENTS WILL RESULT IN WAREHOUSE REJECTION AND ITEMS WILL BE SHIPPED BACK TO VENDOR. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY. IF VENDORS CANNOT INDIVIDUALLY PACKAGE, PACK, MARK AND BAR-CODE AS REQUIRED, VENDORS MAY USE A THIRD PARTY TO PACKAGE ITEMS AS REQUIRED IF NECESSARY. PROVIDE ADDITIONAL COST WITH QUOTATION. ITEMS THAT ARE NOT INDIVIDUALLY PACKAGED WILL NOT BE RECIEVED BY THE WAREHOUSE AND WILL NOT BE ACCEPTABLE. REQUIRED DELIVERY DATE: 12/05/2026 SHIP-FOB DESTINATION TO: USCG SFLC RECEIVING ROOM – BLDG. 88 2401 HAWKINS POINT ROAD BALTIMORE, MD 21226 FAR CLAUSES: This order is subject to but not limited to the following Federal Acquisition Regulations: 52.204-19 Incorporation by Reference of Representations and Certifications. 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services. 52.212-2 Evaluation-Commercial Products and Commercial Services. 52.212-4 Contracts Terms and Conditions. 52.219-6 Notice of Total Small Business Set-Aside. 52.222-50 Combat Trafficking in Persons 52.222-90 Addressing DEI Discrimination by Federal Contractors. 52-225-1 Buy American-Supplies 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving 52.247-34 F.O.B. Destination | - | Combined Synopsis | 11/12/2026 |
This is a combined synopsis/solicitation for commercial items prepared in accordance with the FAR Overhaul Part 12 and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Offers are being requested, and a separate written solicitation will not be issued. Solicitation 70ZU0127QAG007 is issued as a Request for Quotation (RFQ) This solicitation incorporates provisions and clauses by reference. Full text of provisions and clauses may be accessed electronically at www.acquisition.gov. This acquisition is set-aside for small business concerns. The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order. No down payments or advanced payments will be made to the awarded vendor. Award will be made on a Best Value Basis as result of this synopsis/solicitation. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency. Best Value will be evaluated by who meets all technical requirements, who meets our required time frame and by price. All quotes shall be emailed to Amanda Wood via Amanda.M.Wood@uscg.mil and shall be received no later than 12 NOV 26 at 10:00 am (eastern). All emails quotes shall have 70ZU0127QAG007 in subject of email. Item 1) NSN: 4730-01-158-7998 STRAINER, SEDIMENT EATON FILTRATION MODEL 53 BTX DUPLEX STRAINER, CAST IRON CONSTRUCTION W/BRONZE DIVERTER PLUG, QUICK OPEN TYPE COVERS, STAINLESS STEEL BASKETS /W 1/32" PERFORATIONS, 1" NPT THREADED CONNECTIONS. STRAINER BASKETS INCLUDED WITH THIS DUPLEX STRAINER ARE 1" #53 1/32" PERFORMATION. P/N: ST550SBXX. REF: EATON FILTRATION DRAWING SD053081, REF F. MFG: EATON FILTRATION LLC PN: ST053010AT46TS QTY: 12 EA ***EACH DUPLEX STRAINER SHALL BE INDIVIDUALLY PACKAGED AND MARKED AS NSN: 4730-01-158- 7998, STRAINER, SEDIMENT, IAW SP-PP&M-001 OR MIL_STD-129R CHANGE 3. BARCODING IS MANDATORY. FAILURE TO COMPLY WILL RESULT IN WAREHOUSE REJECTION AND NON PAYMENT. REQUIRED DELIVERY DATE: 03 MARCH 2027 SHIP-FOB DESTINATION TO: USCG SFLC RECEIVING ROOM – BLDG. 88 2401 HAWKINS POINT ROAD BALTIMORE, MD 21226 FAR CLAUSES: This order is subject to but not limited to the following Federal Acquisition Regulations: 52.204-19 Incorporation by Reference of Representations and Certifications. 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services. 52.212-2 Evaluation-Commercial Products and Commercial Services. 52.212-4 Contracts Terms and Conditions. 52.219-6 Notice of Total Small Business Set-Aside. 52.222-50 Combat Trafficking in Persons 52.222-90 Addressing DEI Discrimination by Federal Contractors. 52-225-1 Buy American-Supplies 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving 52.247-34 F.O.B. Destination | - | Combined Synopsis | 11/12/2026 |
This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR Part 12 - Acquisition of Commercial Products and Commercial Services | Acquisition.GOV and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. Request for Quote number in header applies and is used as the solicitation number. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01, effective, 13 March 2026. It is anticipated that a purchase order shall be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, (vendor must have an active registration in SAM.Gov prior to award) which if timely received, shall be considered by this agency. Payments are NET 30 and will be made in accordance with the FAR 52.232-25 Prompt payment clause 52.232-25 Prompt Payment. | Acquisition.GOV. The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items: Evaluation Criteria 1. Technical Acceptability The Government will evaluate each quote to determine whether the offered products meet all of the requirements specified in the solicitation, including: Compliance with all packaging, preservation, and marking requirements as specified. Quotes that do not state that the requirement can be met will not be considered. Ability to meet or exceed the required delivery schedule. 2. Price Quotes will be evaluated for fairness and reasonableness of price. The total evaluated price will be the sum of all line items, include shipping cost into item pricing. Quotes with a separate line for shipping will not be considered. 3. Past Performance The Government may consider the vendor’s past performance with the U.S. Coast Guard or other federal agencies, if available and relevant. The Government reserves the right to use information from sources other than those provided by the vendor. 4. Responsibility The vendor must have an active registration in SAM.gov prior to award. The vendor must not be debarred or suspended from doing business with the federal government. The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items: LINE ITEM 1: Item Name: REPAIR KIT, STOPPER NSN: 2040-01-483-3947 PN: MDL573009KIT Qty: 06 EA Kit Include: 2 EA SEALS(110X130X12) P/N: SKF43301 HMSA7 V 2 EA BEARINGS (SPH RLR) (110X180X69) P/N: SKF24122 CC/W33 WASHER (RLR CHK) P/N 573-009PC9 SEAL WIPER P/N 573-009PC13 LOCKPIN P/N 573-009PC25 PIN QUICK P/N 98404A496 2 EA GASKETS P/N 573-009PC71 Packaging requirements: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHERRESISTANT PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 DOUBLE-WALL FIBERBOARD BOX. BAG CLOSURE SHALL BE EFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS ARE ACCEPTABLE. MARKING IAW MIL-STD-129R & BAR CODING IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY. PACKAGE LABEL: ITEM NAME: PART NUMBER: NSN: QNTY: (EXAMPLE 1 EA) COND-A CONTRACT NUMBER / ORDER NUMBER FOR TECHNICAL INQUIRIES: POC: EQUIPMENT SPECIALIST E-MAIL: KEVIN.L.RECKARD@USCG.MIL PH: 571-613-3388 ** SHIPPING: FOB DESTINATION REQUIRED. ** ITEM REQUIRED DELIVERY DATE: 12/18/26 If you are unable to meet the required delivery date, please indicate your earliest possible delivery date in your quotation. SHIP TO: USCG SURFACE FORCES LOGISTICS CENTER 2401 HAWKINS POINT ROAD RECEIVING ROOM- BUILDING 88 BALTIMORE, MD 21226 All Deliveries are to be made Monday through Friday between the hours of 8am to 3pm. Please make sure that any changes in Delivery Timeframes or tracking information get sent to Christopher.A.Huertas-Rolon@uscg.mil Invoicing In IPP It is now a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov. All invoices must contain the following information: CG contract number, vendor’s invoice number, vendor’s UEI, TIN number, cage number, PO item number, description of supplies or services, unit prices and extended totals (INVOICES FOR PURCHASE ORDERS AWARDED BY SURFACE FORCE LOGISTICS CENTER, BALTIMORE ARE TO BE SUMITTED AS NON PO IN IPP). Shipping costs will be included in line-item price. To submit an invoice, vendor must have access to www.ipp.gov. Additionally, a copy of the invoice must also be sent to the PO Issuing Office at: Christopher.A.Huertas-Rolon@uscg.mil | - | Solicitation | 11/18/2026 |
This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR Part 12 - Acquisition of Commercial Products and Commercial Services | Acquisition.GOV and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. Solicitation number 2127407Y152141608 applies and is used as a Request For Quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2024-05, dated 22 May 2024. It is anticipated that a Best Value purchase order shall be awarded as a result of this synopsis/solicitation. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency. Best Value will be evaluated by who can provide the complete requirement, who meets our required time frame and by price. All vendors providing a quotation must either have an active SAM.Gov registration or provide proof they have submitted their entity for registration. Payments are NET 30 and will be made in accordance with the FAR 52.232-25 Prompt payment clause 52.232-25 Prompt Payment. | Acquisition.GOV. The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order. The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items: Vendor Information: Entity Name Entity Unique Entity ID Entity Address Entity POC Entity Phone Number POC Email Address Vendor shall provide: ITEM 1: VALVE NSN: 4820 00-463-2191 CAGE CODE / PART NUMBER: 76364 / 1306; 30263 / B102E; 3B558 / B102E DESCRIPTION: VALVE, 4" IPS, GATE, BRONZE BODY, NICKEL ALLOY TRIM, COMM. FLANGED, 150 PSI, 225 PSI W.O.G., 9" FACE TO FACE, 9" OD FLANGE, 8 HOLE, 7 1/2" BOLT CIRCLE, RISING STEM, BOLTED BONNET. PIMA VALVE IS ONLY ACCEPTABLE SUBSTITUTE. SOURCE J.A MOODY 610-647-3810, PIMA VALVE, PN: B102E. QUANTITY: 6 EA UNIT PRICE: LINE TOTAL: DELIVERY REQUIRED: 12/02/2026 ESTIMATED DELIVERY DATE: ITEM 2: VALVE NSN: 4820 00-148-4864 CAGE CODE / PART NUMBER: 81349 / MILV18439; 30263 / B1620-0250NOREV/CID882039626; 6R256 / B1620-0250NOREV/CID882039626 DESCRIPTION: VALVE, 2 1/2" IPS, CHECK, SWING, BRONZE BODY, MONEL TRIM, COMMERCIAL FLANGED, 150LB. QUANTITY: 1 EA UNIT PRICE: LINE TOTAL: DELIVERY REQUIRED: 12/02/2026 ESTIMATED DELIVERY DATE: ITEM 3: VALVE NSN: 4820 01-LG1-7418 CAGE CODE / PART NUMBER: 7D409 / 40496-305; 4JR65 / 40496-305; 0BGU9 / 40496-305 DESCRIPTION: VALVE, 1", BRONZE, UESB, 100-200 PSI ADJUSTABLE RANGE, TRAC STYLE HG, MIL-V-2961 TY 1, CL 1, BODY A, SERIES 400, GAS PRESSURE REDUCING VALVE, MONEL TRIM, BUNA-N DISC & DIAPHRAGM. QUANTITY: 2 EA UNIT PRICE: LINE TOTAL: DELIVERY REQUIRED: 05/17/2027 ESTIMATED DELIVERY DATE: ITEM 4: VALVE NSN: 4820 01-LG1-7419 CAGE CODE / PART NUMBER: 7D409 / 917BFEB05; 34494 / 917BFEB05AKE0150; 4JR65 / 917BFEB05AKE0150 DESCRIPTION: VALVE, 1" X 1 1/2", MPT X FPT, STAINLESS STEEL, RELIEF VALVE SET @150 PSI FOR AIR SERVICE, OPEN LIFT LEVER W/ VIBRATION DAMPENER. KUNKLE VALVE - # 917BFEB05AKE0150. QUANTITY: 2 EA UNIT PRICE: LINE TOTAL: DELIVERY REQUIRED: 05/17/2027 ESTIMATED DELIVERY DATE: ITEM 5: VALVE NSN: 4820 01-LG1-7310 CAGE CODE / PART NUMBER: 76364 / 35FCS1NLL-034; 7D409 / 35FCS1NLL-034; 6D887 / 35FCS1NLL-034 DESCRIPTION: VALVE, BALL, 3/4" NPS, FULL PORT, 3-PIECE, CARBON STEEL BODY, SOCKET WELD ENDS, 316 STAINLESS STEEL BALL AND STEM, PTFE SEATS, GRAPHITE PACKING, STAINLESS STEEL 316 LATCH LOCK HANDLE, API FIRE-SAFE TESTING. MILWAUKEE VALVE - # 35FCS1NLL-034. QUANTITY: 11 EA UNIT PRICE: LINE TOTAL: DELIVERY REQUIRED: 05/17/2027 ESTIMATED DELIVERY DATE: ITEM 6: VALVE NSN: 4820 01-LG1-7311 CAGE CODE / PART NUMBER: 76364 / 35FCS1NLL-100; 0BGU9 / 35FCS1NLL-100; 7D409 / 35FCS1NLL-100 DESCRIPTION: VALVE, BALL, 1" NPS, FULL PORT, 3-PIECE, CARBON STEEL BODY, SOCKET WELD ENDS, 316 STAINLESS STEEL BALL AND STEM, PTFE SEATS, GRAPHITE PACKING, STAINLESS STEEL 316 LATCH LOCK HANDLE, API FIRE-SAFE TESTING. MILWAUKEE VALVE - # 35FCS1NLL-100. QUANTITY: 9 EA UNIT PRICE: LINE TOTAL: DELIVERY REQUIRED: 05/17/2027 ESTIMATED DELIVERY DATE: ITEM 7: VALVE NSN: 4820 01-LG4-3776 CAGE CODE / PART NUMBER: 4JR65 / T-113-HC; 7D409 / 24.T113HC / T-113-HC-0075; 63686 / 24 DESCRIPTION: VALVE, 3/4" FNPT X 3/4" HOSE END, GATE, BRONZE, NON-RISING STEM, W/CAP AND CHAIN, 200 PSI W.O.G., REPLACES 4820-01-049-3195. NIBCO - # T-113-HC APOOLO - # 70-104HC QUANTITY: 1 EA UNIT PRICE: LINE TOTAL: DELIVERY REQUIRED: 05/17/2027 ESTIMATED DELIVERY DATE: ITEM 8: VALVE NSN: 4820 01-LG1-7312 CAGE CODE / PART NUMBER: 76364 / 35FCS1NLL-150; 6D887 / 35FCS1NLL-150; 0BGU9 / 35FCS1NLL-150 DESCRIPTION: VALVE, BALL, 1-1/2" NPS, FULL PORT, 3-PIECE, CARBON STEEL BODY, SOCKET WELD ENDS, 316 STAINLESS STEEL BALL AND STEM, PTFE SEATS, GRAPHITE PACKING, STAINLESS STEEL 316 LATCH LOCK HANDLE, API FIRE-SAFE TESTING. MILWAUKEE VALVE - # 35FCS1NLL-150. QUANTITY: 1 EA UNIT PRICE: LINE TOTAL: DELIVERY REQUIRED: 05/17/2027 ESTIMATED DELIVERY DATE: ITEM 9: VALVE NSN: 4820 01-LG1-7289 CAGE CODE / PART NUMBER: 1FFH9 / SS-6PNBGM8-F8-G; 0BGU9 / V46GR-8N-GF-S; 7D409 / SS-6PNBGM8-F8-G DESCRIPTION: VALVE, 1/2" MNPT X 1/2" FNPT, GAUGE ROOT VALVE, 316 STAINLESS STEEL. DK-LOK - # V46GR-8N-GF-S; SWAGELOK - # SS-6PNBGM8-F8-G. QUANTITY: 6 EA UNIT PRICE: LINE TOTAL: DELIVERY REQUIRED: 05/17/2027 ESTIMATED DELIVERY DATE: * Delivery address and terms stated below. * * Access to some drawings may be Export-Controlled and require any recipient to be registered in the Joint Certification Program (JCP) through DLA to receive the drawing. *Any proposed substitutions must be accompanied by a Specification Sheet to undergo evaluation by the requiring officials for compatibility to the Requirement. * * Deliveries are Required by the dates provided on each line. * ** Total cost shall have delivery and any Freight charges included. ** ** SHIPPING: FOB DESTINATION REQUIRED. ** Preparation For Delivery All material must be shipped to U.S. Coast Guard Surface Forces Logistics Center, 2401 Hawkins Point Road, Receiving Room- BLDG 88,Baltimore, MD, 21226 for this Purchase Order. Material must be accompanied by an itemized packaging list securely attached to the outside of the shipment. All packing lists shall cite the Purchase Order Number with the packaging in such a manner to ensure identification of the material provided. Material shall be packed for shipment using Military Packaging, for example in packaging please reference MIL-STD-2073-1E. Material must be packaged in such a manner as to afford adequate protection to the item against corrosion, deterioration, and physical damage during shipment from the supply course to Surface Forces Logistics Center locations. Packaging shall provide adequate protection for warehouse storage and shipments from the warehouse. All material(s) shall be marked in accordance with MIL-STD-129R and barcoded unless otherwise authorized by the Contracting Officer. All material will have the Purchase Order Number, National Stock Number (if applicable), Vendor name and Part Number clearly marked on the exterior of all material shipped. All Deliveries are to be made Monday through Friday between the hours of 7:00AM to 1:00PM. Please make sure that any changes in Delivery Timeframes or tracking information get sent to Torrance Campbell at Torrance.O.Campbell@uscg.mil. Invoicing In IPP It is a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov. All invoices must contain the following information: CG Purchase Order number, vendor’s invoice number, cage number, PO item number, description of supplies or services, unit prices and extended totals (INVOICES FOR PURCHASE ORDERS AWARDED BY SURFACE FORCE LOGISTICS CENTER, BALTIMORE ARE TO BE SUMITTED AS NON PO IN IPP). Shipping costs will be indicated as a separate line item on the invoice (if applicable). Shipping cost $100 or more must be accompanied by a separate freight invoice when submitting an invoice(s) for payment (if applicable). To submit an invoice, vendor must have access to www.ipp.gov. To gain access please indicate if you don’t have an account so the issuing office can establish one for you. FAR Clauses This order is subject to but is not limited to the following Federal Acquisition Regulations: 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment. 52.204-26 Covered Telecommunications Equipment or Services-Representation. 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services. 52.212-3 Offeror Representations and Certifications—Commercial Products and Commercial Services. 52.212-4 Contract Terms and Conditions — Commercial Products and Commercial Services. 52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities. 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. 52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services. 52.222-90 Addressing DEI Discrimination by Federal Contractors. | - | Combined Synopsis | 11/16/2026 |
Additional Details
Solicitation Number
70Z08526Q40203B00
Archive Date
Sep 25, 2026
Office Address
ALAMEDA, CA, 94501