USCGC CYPRESS (WLB-210) DRYDOCK REPAIR FY2026
Archived on December 6, 2025. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 8:00 AM PST
- Posted
- November 12, 2025
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 336611: Ship Building and Repairing
- Agency
- Department of Homeland SecurityUS COAST GUARD
Notice details
- Office
- SFLC PROCUREMENT BRANCH 2(00085)
- Place of performance
- Alaska
- Last updated
- Nov 6, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 70Z08526QIBCT0004
- Notice ID
- 7aaa5c9db6074f14942147cf87b190e3
Description
***********************SEE ATTACHMENT FOR THE REST OF THE SOLICITATION********************
This requirement is for a vessel that is homeported in Coast Guard District 17 Alaska.
It is anticipated that this requirement will be solicited in accordance with NDAA FY 2021 Section
8820, Shipyard Provision, Section 8220, VESSEL CONVERSION, ALTERATION, AND REPAIR
PROJECTS. However, offers may be considered from vendors outside of District 17.
Contract Type: This solicitation will result in the award of an Indefinite Delivery Requirements contract (IDR).
6. The Contracting Officer plans to make an award upon initial submissions. Therefore, the offer should be complete as
submitted, including the offeror's best price, and shall not include references to data or information previously submitted. Data
previously submitted, if any, will not be incorporated "by reference" into the offer and will not be considered in the evaluation of
the offer.
7. Questions regarding any aspect of this procurement shall be submitted in writing per via email only and addressed to
Ou.T.Saephanh@uscg.mil and Kiya.R.Plummer-Dantzler@uscg.mil no later than 8 AM PST on 12 November 2025.
Phone calls will not be accepted. The subject line of all email correspondence must state RFQ#70Z08526QIBCT0004
QUESTIONS in the subject line. All questions and responses will be posted via email and on SAM.gov for all potential offerors
to review. Any revision to the RFQ as a result of questions and answers will be issued as an amendment to the solicitation.
Questions received after this deadline may not be considered.
8. Request for Drawings: The last day to request drawings regarding this solicitation is 8 AM PST on 08 November 2025.
After this date, further requests may not be accepted due to time constraints. To request drawings, contact Ou.T.Saephanh
@uscg.mil and Kiya.R.Plummer-Dantzler@uscg.mil. All requests should identify the solicitation number RFQ#70Z08526Q
IBCT0004. Some references listed in the Specification, under "Consolidated List of References," are subject to Export Control
limitations or have otherwise restricted distribution and have been deemed "limited access" and "export controlled" packages.
In order to access these documents, vendors must be certified as a US or Canadian contractor by the Joint Certification
Program (JCP) administered by the Defense Logistic Information Service (DLIS). Instructions and procedures for being
certified by JCP can be found at https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/. Only those vendors that have
current certification by JCP will be able to be granted explicit access to these packages by the USCG.
9. Responses to this solicitation shall be submitted in writing via email only and addressed to
Ou.T.Saephanh@uscg.mil and Kiya.R.Plummer-Dantzler@uscg.mil no later than 8 AM PST on 21 November
2025. Phone calls will not be accepted. The subject line of all email correspondence must state
RFQ#70Z08526QIBCT0004 in the subject line. Quotes received after the deadline may not be
considered.
ANTICIPATED AWARD DATE: The anticipated date of award is on or about 19 December 2025.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (7)
- Download
SF 30 70Z08526QIBCT00040001_US - CYPRESS DD FY 26.pdf
160 KBAdded in Combined Synopsis/Solicitation version 6Posted - Download
70Z08526QIBCT0004_1 - CYPRESS DD FY 26.pdf
382 KBAdded in Combined Synopsis/Solicitation version 6Posted - Download
J and A Work Items.pdf
1003 KBAdded in Combined Synopsis/Solicitation version 2Posted - Download
Attachment 2 - Specifications CYPRESS DD FY 26.pdf
5.7 MBAdded in Combined Synopsis/Solicitation version 2Posted - Download
Attachment 1 - Price Schedule CYPRESS DD FY 26 Work Item.xls
86 KBAdded in Combined Synopsis/Solicitation version 2Posted - Download
Attachment 3 - Past Performance Information Form.docx
19 KBAdded in Combined Synopsis/Solicitation version 2Posted - Download
SSN CYPRESS 10.17.25.docx
41 KBAdded in Sources Sought version 4Posted
Lifecycle
- 4Version 4Sources SoughtArchived
USCGC CYPRESS (WLB-210) DRYDOCK REPAIR FY2026
- 2Version 2Combined Synopsis/SolicitationArchived
Type changed from Sources Sought to Combined Synopsis/Solicitation
USCGC CYPRESS (WLB-210) DRYDOCK REPAIR FY2026
- 6Version 6Combined Synopsis/SolicitationArchivedCurrent
USCGC CYPRESS (WLB-210) DRYDOCK REPAIR FY2026
- 9Version 9Award NoticeArchived
Type changed from Combined Synopsis/Solicitation to Award Notice
USCGC CYPRESS (WLB-210) DRYDOCK REPAIR FY2026
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
DRYDOCK REPAIRS FOR THE USCGC TERN POP 06/08/2027-09/28/2027 | 88% | Market Research | 11/04/2026 |
This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. The US Coast Guard, Surface Forces Logistic Center, Alameda CA is seeking contractors interested in providing Maintenance and Repair Services with DRYDOCK AVAILABILITY FY2027 for the USCGC ASPEN (WLB-208) FY27 Drydock Availability. The US Coast Guard Cutter ASPEN (WLB-208) is a 225' seagoing buoy tender homeported at: 4688 Homer Spit Road. Home, AK 99603. Work list will include but is not limited to: Drydocking of a vessel 225ft in length, inspection/maintenance/ and preservation of underwater body paint/hull/ and buoy deck anchor chain, maintenance to rudder/propeller/thrusters/ and shafting, cleaning of ballast/sewage/fuel tanks and piping, crane/deck equipment work, and renewal of sea valves and strainers There are approximately 108 Line Items. ***PLEASE SEE ATTACHMENT*** 1. A WLB's design limits its use to protected and inland waters. The cutter is not crewed for continuous steaming and is normally limited to daylight transits. Due to crewing and cutter employment standards, seven days transit is the limit of crew endurance under normal operating conditions. Ten hours of transit per day is the planning factor due to crew fatigue. WLB's have a maximum speed of 10 knots, however, environmental factors frequently limit average speed to 6.5 knots. 2. Foreseeable costs (crew lodging, messing, rental vehicles, fuel, and authorized crew travel in accordance with the Joint Travel Regulations) will be added to the pricing and will be an economic consideration for award. DISTRICT 17- ALASKA: This requirement is for a vessel that is homeported in Coast Guard District 17 Alaska. This requirement will be in accordance with NDAA FY 2021 Section 8820, Shipyard Provision, Section 8220, VESSEL CONVERSION, ALTERATION, AND REPAIR PROJECTS. However, offers may be considered from vendors outside of District 17. CUTTER’S HOMEPORT: Homer, AK PLACE OF PERFORMANCE: Contractor’s Facilities DESCRIPTION OF WORK: See attached (Rev-0, 01 October 2026) USCGC ASPEN (WLB 208) SPECIFICATION FOR DRYDOCK REPAIRS FY2027 ***PLEASE SEE ATTACHMENT FOR FULL DETAILS*** ANTICIPATED PERIOD OF PERFORMANCE: 07/06/2027 – 11/07/2027 (125 Days) The applicable NAICS Code is 336611, Ship Building and Repairing, and the size standard is 1,300 employees. SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information and a positive statement OF INTEREST, to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to POC listed in the Contract Opportunities announcement with the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HUBZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern. 4. Documentation Verifying Small Business Certification: Please provide the following documentation as it applies to you company. • If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA. • If claiming HUBZone status, provide a copy of your HUBZone Certificate from SBA. • If claiming SDVOSB status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611. • If claiming VOSB status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611. • If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000.00 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000.00, and the fair market value of all her assets is less than $6 million. • If claiming Woman Owned Small Business (WOSB) status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611. • If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611. 1. Statement of Proposal Submission: Statement on how your company will do the work and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 2. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant. SAM: Interested parties should register at the System for Award Management (SAM) website as prescribed in FAR Clause 52.204-7 System for Award Management (OCT 2018). SAM can be obtained by accessing the internet at https://www.sam.gov/SAM/ or by calling 1-866-606-8220. Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. At this time no solicitation exists; therefore, Do Not Request a Copy of the Solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on Contract Opportunities the website http://sam.gov It is the potential offeror's responsibility to monitor Contract Opportunities for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation. | 87% | Market Research | 11/16/2026 |
86% | Awarded | Open | |
82% | Awarded | Open | |
Amendment 0006: Amendment provides clarification regarding contractor pier power. One 480 VAC, 400A Viking electrical plug-in will be available on the same pier as the vessel, adjacent to the contractor equipment laydown area. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Amendment 0005: This amendment provides responses to offeror questions concerning Work Items D-008 and D-021. The amendment corrects the drawing reference in D-008, Paragraph 3.2.3, to CG Drawing 418A-WMSL-801-1 and clarifies the Government-furnished equipment applicable to D-021. All other terms and conditions of the solicitation remain unchanged. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Amendment 0004: provides the Government’s responses to additional offeror questions regarding drawings and technical requirements associated with Work Items D-016, D-009, and D-008. The amendment also extends the solicitation closing date and time to October 5, 2026, at 1400 Pacific Time (PT); all other terms and conditions remain unchanged. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Amendment 0003: provides the Government’s response to an offeror question regarding the correct compartment identification for the MPAC work under Work Item D-018. The amendment clarifies that MPAC #1 is located in the FMMR Upper Level and that paragraph 1.1 identifies the correct work locations. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Amendment 0002: Adds a clarifying note regarding the Attachment 2 Specification posted in Amendment 0001 & extends the no later than due date for receipt of quotes from 22 September 2026 to 29 September 2026 at 10:00 am Pacific Time. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Amendment 0001: Replaces the Attachment 1 Price Schedule as well as the Attachment 2 Specification. The Attachment 2 Specification originally posted was for a previous/different project regarding the cutter. The Attachment 2 Specification which is part of Amendment 0001 is an entirely different specification and therefore specifies no revisions on the Revisions page iii. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Coast Guard Cutter MIDGETT fiscal quater 2, fiscal year 2027 dockside repair. The period of performance is 2 February - 8 May 2027. | 82% | Combined Synopsis | 10/05/2026 |
Additional Details
Solicitation Number
70Z08526QIBCT0004
Archive Date
Dec 6, 2025
Office Address
ALAMEDA, CA, 94501