Metastable Interstitial Composite (MIC) Lead Free Percussion Primer, Small Caliber Ammunition
Responses closed . Full description on SAM.gov.
Overview
- Response deadline
- 1:00 PM EDT
- Posted
- March 25, 2026
- Notice type
- Sources Sought
- NAICS
- 332992: Small Arms Ammunition Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.ACC-CTRS.ACC-NJ.W6QK ACC-PICA
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W15QKN-26-X-1BG7
- Notice ID
- 755f9af49d1943ffa958785e34882364
Description
The U.S. Army Contracting Command - New Jersey (ACC-NJ) is conducting market research on behalf of Combat Capabilities Development Command - Armaments Center (DEVCOM-AC), Munitions Engineering Technology Center (METC), Small Caliber Munitions Division FCDD-ACM-MI at Picatinny Arsenal, NJ. This research is to determine the ability for US-based Contractors to manufacture and produce variable quantities of Metastable Interstitial Composite (MIC) Lead Free Primers (LFPs). These primers are intended for further development and testing of small caliber ammunition from 5.56mm up through Caliber.50.
DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. RESPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMATION PERTAINING TO THIS REQUIREMENT.
REQUIREMENT: Use of lead-based primers in military munitions continues to be a leading source of personnel lead exposure and cause of environmental contamination. As such, the US Army is developing a replacement for lead styphnate percussion primer explosives in small caliber munitions with the objective of further eliminating lead in all caliber cartridges. Research and Development (R/D) efforts involving nanothermite-based primers have demonstrated high potential for a lead-free solution. Advances in water-based mixing and automated loading processes were developed to enable production of metastable interstitial composite (MIC) primers. These processes use a MIC-based material with the addition of sensitizers and gas generating agents to tune the performance characteristics of primers. This technology has high potential for automated manufacturing as opposed to traditional methods of handmade primers that directly expose personnel to explosive materials.
The Government is seeking pricing information for the following small caliber percussion primers for 7.62mm, 5.56mm and Cal.50 ammunition respectively. Interested contractors are requested to provide detailed unit pricing for quantities ranging from 0 to 50,000 units. To assist in determining the optimal order quantities for the best overall value, contractors are encouraged to provide tiered pricing structures based on various quantity thresholds.
The Contractor will be expected to support various meetings (kickoff, delivery status, recurring technical), and shall be able to handle energetics, and produce and test end item MIC lead free primers that meet the requirements of MIL-DTL-46610.
The Contractor will work with the U.S. Government (USG) on primer variants with improved/refined primer formulations that will streamline the manufacturing process and reduce cost without sacrificing quality or safety. All work shall be performed in the U.S.
The Contractor shall be capable of all aspects of producing the lead-free primer including but not limited to:
- Material procurement
- Material batch tracking/lotting
- Handling energetic materials and mixing operations
- Manufacturing of primers (dosing of MIC material, consolidating, finish assembly)
- In-process and final inspections
- Ballistic testing
- Failure investigations
- Submission of test reports
- Shipment of MIC LFPs in suitable containers.
The USG will receive unlimited rights to any/all technical data developed or delivered. The contractor shall not use any internally developed technical data or any other pre-existing proprietary information, if such a use would in any way prevent the Government from receiving Unlimited Rights.
Background: The applicable NAICS Code for this requirement is 332992, Small Arms Ammunition Manufacturing, with a Small Business Size Standard of 1,300 employees. The Product Service Code (PSC) is 1305, Ammunition, through 30mm. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. Interested vendors are strongly encouraged to submit a capability statement with the information below.
SUBMISSION DETAILS:
If your organization has the potential capacity to provide the required services, please provide the following information:
1) NAICS and PSC.
2) Full company name, address, primary points of contact and their email addresses, Web site address, telephone number, CAGE Code and DUNS number, and size of business (i.e. large, small, disadvantaged, veteran owned, woman owned, etc.).
3) Ability to provide a product that meets the above specifications.
4) Past Performance: To demonstrate capability, interested parties are requested to provide evidence of past performance. This should include relevant contract numbers, the corresponding dollar values, and points of contact for verification. For each reference, please include a brief description of the work performed to illustrate your experience in providing this or similar products.
Vendors must be properly registered in the Government System for Award Management database (SAM). Contractors may obtain information on SAM registration and annual confirmation of requirements by calling 1-866-606-8220, or via the Internet at www.sam.gov.
This is a market survey for information only and shall not be construed as a request for a proposal or as an obligation on the part of the US Government. The US Government does not intend to award a contract on the basis of this market survey or otherwise pay for information solicited.
Official responses must be submitted at no cost to the US Government by 1:00PM eastern daylight time April 15, 2026, via electronic submittals to Gloria Thoguluva, Contracting Officer (gloria.thoguluva.civ@army.mil) and Roseanne Hooven, Contract Specialist (roseanne.hooven2.civ@army.mil). Phone inquiries will not be addressed; all requests should be submitted in writing via email. Respondents will not be notified of the results of the survey.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Links (4)
- PIEE Solicitation Module Link for W15QKN-26-X-1BG7piee.eb.milPosted
- Web Based Training for the PIEE Solicitation Modulepieetraining.eb.milPosted
- Registration Instructions for the PIEE Solicitation Modulewww.acq.osd.milPosted
- Department of Defense Procurement Toolboxdodprocurementtoolbox.comPosted
Lifecycle
- 1Version 1Sources Sought
Metastable Interstitial Composite (MIC) Lead Free Percussion Primer, Small Caliber Ammunition
- 2Version 2Sources SoughtCurrent
Metastable Interstitial Composite (MIC) Lead Free Percussion Primer, Small Caliber Ammunition
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
9mm M1041 Practice Ammunition Cartridges manufactured to meet Military performance Specification (PSPEC) MIL-PRF-32312 and Drawing Number 13008817, for use with the U.S. Army qualified CCMCK weapon conversion system for the M9 and M11, and for the CCMCK Simunition Upper Receiver Conversion Kit system for the M4 Carbine.Amendment 0001 - Update Narrative in Section A. | - | Solicitation | 11/25/2026 |
Amendment 001 ? The purpose of this amendment is to; 1. Include Attachment 0010 Drawings which has been determined to be distribution A, unlimited distribution. 2. Update Section J, Attachment 0014 GFP Transportation Checklist to include a QTY of 3 for Pin Spring, Bolt Catch. The Title of Section J, Attachment 0014 has also been updated to GFP Transportation. 3. Update Section J, Attachment 0009 NDA to be a Word Version and not PDF version of the document. Additionally, the drawings have been removed from this document as they are Distribution A. The solicitation response date has remained the same. (End Amendment 001) The U.S. Army Contracting Command - New Jersey, on behalf of the office of the Office of the Project Manager, Maneuver Ammunition Systems (PM MAS), is issuing a Request for Proposal (RFP) for 5.56mm M1042 Loose and M1071 Linked Marking Ammunition Cartridges for use in Close Combat Mission Capability Kit (CCMCK). The M1042 is fired in the M4/M4A1, M16A2/A3/A4 Rifles converted with the CCMCK Conversion Bolt, National Stock Number (NSN) 1005-99-132-2616. The M1071 is fired in the M249 Squad Automatic Weapon (SAW) converted with the CCMCK Conversion Bolt, NSN 1005-99-848-0609. The CCMCK is a user installed temporary weapon conversion system that allows the Warfighter to employ a specific individual weapon at a minimum engagement distance of five feet using low velocity marking ammunition while precluding the weapon from firing standard service ammunition. The marking ammunition is a reduced-energy, non-lethal cartridge, that leaves a bright, water-soluble color marking compound on target upon impact, without penetrating the Warfighters Operational Camouflage Pattern on its Army Combat Uniforms (ACU) or Personnel Protective Equipment (PPE). The visible impact left by the marking compound allows for an accurate assessment of simulated lethality and shot placement. Specifications: The Contractor shall manufacture, test, inspect, package and deliver the 5.56mm M1042 Loose and M1071 Linked Marking Ammunition Cartridges in accordance with the Military Performance Specifications (P-SPECs) MIL-PRF-32313 and MIL-PRF-32315, which shall be the government documents / requirements. The anticipated solicitation will provide details on how to obtain these military specifications. Planned Acquisition: The Government intends to award one Firm Fixed Price (FFP) Requirements contract with five one-year ordering periods (OPs) from Fiscal Year (FY) 26-31. The contract award will be based upon Other Than Full and Open Competition (OTF and OC), in accordance with Federal Acquisition Regulations (FAR) 6.302-1(a)(2)(iii)(B), Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. This is a Sole Source, full-scale production contract to Ultimate Training Munitions, United Kingdom with a possible maximum limit of contractors obligation to deliver a cumulative total of 255M 5.56mm M1042 Loose and M1071 Linked Marking Ammunition Cartridges. The following Ordering Periods are anticipated: Ordering Period (OP) 1: 12 months from date of award OP 2: 12 months from the end of OP1OP 3: 12 months from end of OP2OP 4: 12 months from end of OP3OP 5: 12 months from end of OP4 | - | Solicitation | 04/30/2026 |
***Amendment 0001*** Industry Question One, The listing says, The estimated quantity to be purchased is approximately 6.3 million M1162 and M1163 cartridges. Is that:6.3 million M1162 and M1163, each, per year? 6.3 million total M1162 and M1163 per year? 6.3 million M1162 and M1163, each, through the life of the contract? 6.3 million, M1162 and M1163 total through the life of the contract? Government Response: The estimated quantity to be purchased based on the current budget is approximately 6.3 million for both M1162 and M1163 cartridges, however please note the capacity requirements under paragraph 6 of the submission information. Any resulting RFP will include comparable quantities in order to allow the Army to surge production in the event of a conflict. (End Amendment One)..................... 300 and .338 Norma Magnum (NM)Market Survey DESCRIPTION: The United States (U.S.) Army Contracting Command, New Jersey (ACC-NJ) on behalf of the Project Manager for Maneuver Ammunition Systems (PM MAS) is seeking to identify potential sources for the manufacture and delivery of.300 Norma Magnum (NM), M1163, Ball Ammunition, Department of Defense Identification Code (DODIC): AC33 and .338 NM, M1162, Armor Piercing (AP) Ammunition, DODIC: AC32. Each DODIC will be fired from the Mk22 Precision Sniper Rifle. SPECIFICATIONS: The .300 NM Ball and the .338 NM AP cartridges will be procured to a U.S. Government Owned Technical Data Package (TDP). In addition, the cartridges must meet the requirements included in the Detailed Specifications for M1162 (MIL-DTL-32619) and M1163 (MIL-DTL-32618). TDP Upper-level drawings and Detailed Specifications may be provided upon request. The TDP Upper-level drawings are Distribution Statement A. Distribution A means distribution is authorized for public release. The Detailed Specifications are Distribution Statement D. Distribution D means distribution is authorized to the Department of Defense (DoD) and U.S. DoD contractors only (Critical Technology). The TDP and Detailed Specifications contain technical data whose export is restricted by the Arms Export Control Act (Sec 2751 of Title 22, United States Code) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50, United States Code). Violations of these export laws are subject to severe criminal penalties. Disseminate only in accordance with provisions of DoD Directive 5230.25 and DoD Instruction 2040.02. PLANNED ACQUISITION: The U.S. Government is contemplating award of a single Firm Fixed Price Indefinite Delivery Indefinite Quantity contract to fulfill Fiscal Year (FY) 27-32 requirements. The estimated quantity to be purchased is approximately 6.3 million M1162 and M1163 cartridges. Initial delivery is required 540 calendar days after award if First Article Test (FAT) is required, and 270 calendar days after award if FAT is not required. Sources interested in supplying this precision ammunition should adequately describe their experience in small caliber production and testing, annual production capacity, and ability to build to the Detailed Specifications: MIL-DTL-32619 and MIL-DTL-32618, and their respective TDPs. SUBMISSION INFORMATION: Responses shall be submitted electronically via e-mail to: david.e.schutzer.civ@army.mil, no later than 3:00pm Eastern on 17 February 2025. Offerors are instructed to include .300 and .338 NM as the subject of their response. Interested companies should respond by providing the U.S. Government the following information:1) Name of company and Commercial and Government Entity (CAGE) Code;(2) Point of Contact name, telephone number and e-mail address;(3) Company address;(4) Business type/size information; If a small business, please indicate any applicable socio-economic status such as: Small Disadvantaged Business (SDB), Service Disabled Veteran-Owned Small Business (SDVOSB), 8(a), HUB Zone, etc.(5) Identification of interest in this opportunity as a prime or subcontractor;(6) (a) A detailed description of the companys manufacturing, inspection, and testing capabilities, facilities, production equipment and status, personnel, and past commercial and United States Government manufacturing experience with .300 and .338 NM or similar precision cartridges; (b) a timeline to begin production, not to exceed 180 calendar days after contract award; (c) monthly and annual production capacities with assumptions about number of shifts and any other production factors that may affect monthly capacities with evidence of proven monthly production quantities of 170,000 each M1163 cartridges and 40,000 each M1162 cartridges; (d) minimum order quantity required (if applicable); (e) manufacturing lead time for each item listed (schedule shall include testing against MIL-DTL-32619 and MIL-DTL-32618, if not already performed); (f) a brief summary of possible partnering/teaming arrangements; (g) sketches, drawings, specifications, brochures and current estimated unit cost per million; (h) sources shall submit an outline of their plans and schedule to verify the design in addition to any contractor performed testing results and data to support claims that the design will conform to MIL-DTL-32619 and MIL-DTL-32618 requirements. Please identify any Proprietary information submitted. A respondent to this survey must have the majority of the skills and facilities that are required to manufacture this item. If a respondent does not have these resources (technical, manufacturing, personnel, etc.) available, then it must demonstrate its ability to obtain them in a reasonable time period. If a respondent chooses to utilize the services of sub-tier vendors or subcontractors, those vendors or subcontractors must also meet the same criteria as the prime contractor. The Upper-level drawing can be provided upon request to the Point of Contact listed above. Detailed Specification requests shall be submitted in writing using AMSTA-AR Form 1350 Technical Data Request Questionnaire (attached) along with a signed DD 2345 Military Critical Technical Data Agreement form and a fully executed Non-Disclosure and Non-Use Agreement (attached). Offerors must be registered with the U.S./Canada Joint Certification Office to obtain a copy of the Detailed Specifications. (See www.dlis.dla.mil/jcp/ for instructions and information). Offerors should submit their certification via DD Form 2345 or register immediately. To provide the data to foreign subcontractors, offerors must apply for an export license. An offerors delay in applying for DD 2345 certification or an export license will not be a basis to extend the closing date of any future request for proposal. Offerors must be able to receive, handle, and properly store Controlled Unclassified Information (CUI). DISCLAIMER: This market survey is for information and planning purposes only. The Government does not intend to award a contract based on this market survey. Participation in this effort is strictly voluntary and any of the information stated above is subject to change. The Government reserves the right to use any non-proprietary information in any resultant solicitation(s). Proprietary information should be marked as such. Please be advised that the Government will not pay for any information submitted under this announcement and that all information is to be submitted at no cost or obligation to the Government. The Government reserves the right to reject, in whole or in part, any private sector input as a result of this market survey. THIS IS NOT A SOLICITATION AND DOES NOT OBLIGATE THE GOVERNMENT TO ISSUE A SOLICITATION. | - | Market Research | 02/17/2026 |
The U.S. Army Contracting Command –Rock Island at Picatinny (ACC-RIP)), on behalf of the Office of the Project Manager, Close Combat Systems (PM CCS) under the Portfolio Management Executive Ammunition & Energetics (MPE A&E), Picatinny Arsenal, NJ, is issuing this sources sought notice as a means of conducting market research to identify potential sources to produce the Government developed Shank 2.0 payload, training warhead, and pre-packed anti-personnel warhead for employment on small Unmanned Aerial System (sUAS) platforms. The Government is also seeking Industry recommendations on improving the Technical Data Package (TDP) for producibility. | - | Market Research | 11/20/2026 |
Reason for amendment is to extend solicitation Cartridge 22 Cal Eley Tenex | - | Combined Synopsis | 02/20/2026 |
Additional Details
Solicitation Number
W15QKN-26-X-1BG7
Archive Date
Mar 25, 2027
Office Address
PICATINNY ARSENAL, NJ, 07806-5000