GovChime
Notice ID: 91b4d10eee454f298c63e02d486ff373Solicitation

Dissolution Vessel Washer

Archived on May 20, 2021. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
1:00 PM UTC−04:00
Posted
April 28, 2021
Notice type
Solicitation
Set-aside
Small Business Set Aside - Total
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of Health and Human ServicesFOOD AND DRUG ADMINISTRATION

Notice details

Office
FDA OFFICE OF ACQ GRANT SVCS
Place of performance
Irvine, 92612
Last updated
Sep 25, 2026

Identifiers

Solicitation number
75F40121Q00047
Notice ID
91b4d10eee454f298c63e02d486ff373

Description

The contractor shall provide a Dissolution Vessel Washer. The instrument shall meet or exceed the following requirements: • The instrument shall consist of a rinse tank and a waste tank contained in a mobile unit with pumps and universal wash module. • The universal wash module shall have a wash nozzle and drain assembly that empties a dissolution vessel, then performs a complete 360° wash that provides a thorough cleaning of the entire vessel in less than 60 seconds. • The universal wash module shall have the ability to securely fit into any (U. S. Pharmacopeia (USP) conforming 1 Liter vessel, regardless of the bath or vessel manufacturer. • The universal wash module shall have a self-adjusting drain that allows for vessel height variations. • The instrument shall have an integrated shaft rinse wand that provides a method for cleaning the shaft and stirring elements on the dissolution apparatus. • The instrument shall have the capability of cleaning at least 28 1 Liter vessels in under 15 minutes. • The rinse tank shall have a volume of at least 38 Liters. • The rinse tank shall have electric level sensors for full/empty determination and a sight gauge indicator. • The rinse tank shall have a fill port equipped with quick disconnect fittings on the top cover and automatic shut-off capability. • The waste tank shall have a volume of at least 76 Liters. • The waste tank shall have electric level sensors for full/empty determination and a sight gauge indicator. • The instrument shall have temperature control with an electronic immersion heater with a temperature range from 25° to at least 60°C. • The instrument shall have a continuous LED display of rinse tank temperature. • The instrument shall have a RS-232 and a USB 2.0 interface port. • The instrument shall be constructed with acid resistant heating elements. • The instrument shall have electrical power of 115V ± 15V, 50/60 Hz, and 10A preset at the factory. • The instrument body must not exceed the following measurements: 26 inches in width, 26 inches in depth and 39 inches in height.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:75F40121Q00047
  1. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. SolicitationCurrentApr 28, 2021

    Dissolution Vessel Washer

    Notice 91b4d10eee454f298c63e02d486ff373 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

75F40121Q00047

Archive Date

May 20, 2021

Office Address

Rockville, MD, 20852