GovChime
Notice ID: 3dd1bf6790f2402328e60df1f515205fSources Sought

Postage by Phone

Archived on August 27, 2019. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM UTC−07:00
Posted
August 7, 2019
Notice type
Sources Sought
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
333318: Classification Not Available

Notice details

Place of performance
Jicarilla Service Unit, Dulce, NM, 87528
PSC
74: OFFICE MACH/TEXT PROCESS/VISIB REC
Last updated
Dec 6, 2025

Identifiers

Solicitation number
75H70719Q00078
Notice ID
3dd1bf6790f2402328e60df1f515205f

Description

The Albuquerque Area Indian Health Services is requesting for quotes to provide postage by phone using a Pitney Bowes SendPro P2000 at the Jicarilla Service Unit located at 500 Mundo Dr. Dulce NM 87528. STATEMENT OF OBJECTIVES: Request for Information number (RFI) 75H70719Q00078 is a "Sources Sought Notice" IAW Far Part 13. The Indian Health Service (IHS) is attempting to locate small business entities with a preference of qualified and eligible IEE or ISBEE firms "Native American Indian Owned and Operated businesses" that can provide supplies to the Indian Health Service under the authority of the Buy Indian Act. This is a request for information only. Responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. Any information submitted by respondents to this notice is strictly voluntary with no obligation or incurred cost by the government. The contractor shall provide "postage by phone" labels for mailing letters, packages and written correspondence IAW all United States Postal Service laws, regulation, fees. Equipment is not necessary and should not be included with proposal as the facility has already purchased a Send-Pro P2000 for this purpose. Provide with response - 1) E-mail response. Shall be in a printer friendly format, Word or PDF, 8x11 page size, 5 page limit. 2) Certification as an IEE or ISBEE firm. The government is ONLY interested in IEE or ISBEE firms. 3) The government requests that interested parties respond to this notice if applicable and identify your business status to the identified NAICS code. 4) Pursuant to FAR 52.204-7, prospective vendors shall be properly registered in www.sam.gov; this includes proper registration as an IEE or ISBEE firm and if eligible, registered as applicable small business certifications (e.g. Hubzone, 8(a), Service Disabled Veteran Owned, Veteran Owned, Women-Owned, Small Disadvantaged), in order for IHS to issue an award and claim procurement actions with eligible IEE or ISBEE small business vendors. 5) Provide detailed capabilities statement, website, and e-catalog as it pertains to 541612 -- Human Resources Consulting Services. 6) Provide Dun & Bradstreet (DUNS) used to create www.sam.gov registration. 7) Identify Business Size: Small or Large 8) GSA/FSS contract holders - provide GSA/FSS/VA or other GWAC contract number, only if applicable. Responses are due by 1700:00 PM MT on August 12, 2019. Email your proposal to cedric.wood@ihs.gov. Offeror must confirm IHS' receipt of their proposal. POC is Cedric A. Wood, Contracting Officer, cedric.wood@ihs.gov.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:75H70719Q00078
  1. Market Research

Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)

  1. Market ResearchCurrentAug 7, 2019

    Postage by Phone

    Notice 3dd1bf6790f2402328e60df1f515205f on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
-SolicitationOpen
***AMENDMENT 0001: A new COMBO is added to the attachments and changes are made to the price evaluation factors. Cannon AFB is looking to acquire two (2) Lochinvar water boilers Model #AWH0500NPM 100 maximum BTU 500,000 fuel source: Natural gas. This boiler is needed to replace the current Lochinvar commercial boiler. All prospective contractors must be registered in the System for Award Management (SAM.Gov) database to be awarded a DOD contract. The product service code for this is 4520 - Space and Water Heating Equipment and the NAICS for this action is 333414 - Heating Equipment (except Warm Air Furnaces). This is a one time, brand name purchase for two (2) boilers, please see the attachments for detailed characteristics and specific documentation.
-Solicitation11/05/2026
A gigapixel camera that captures three-dimensional images in a single shot Creating 3D images usually requires multiple cameras or repeated measurements. GigaPic-3D can capture a gigapixel image in a single exposure. The camera uses light-field imaging, a technique that records both the amount of light and the direction it travels, allowing software to reconstruct 3D images and refocus them after they have been captured. The same camera architecture can also be configured for imaging across a broad range of wavelengths, including visible light and X-rays. This flexibility allows one platform to support scientific, industrial, security and medical applications. Overview GigaPic-3D combines many image sensors into a single camera. Together, these sensors produce images containing billions of pixels. Most gigapixel imaging systems create a final image by collecting many separate photographs and stitching them together. GigaPic-3D captures the entire scene in a single shot, reducing image collection time and eliminating the need to align multiple images before processing. Unlike a conventional camera that records only the brightness of light, GigaPic-3D’s light-field imaging also records the direction that light travels. Its software uses this information to create 3D images and adjust the focus after the image has been captured. The modular design can be adapted for visible light, ultraviolet light, infrared light or X-ray imaging by selecting different optical components and radiation-conversion materials. Advantages Captures gigapixel images in a single shot Produces 3D images from a single exposure Allows images to be refocused after they are captured Eliminates the need to stitch together multiple photographs Built primarily from commercially available components Configurable for imaging from visible light through X-rays Modular design supports different sensors, optics and camera configurations Integrated processing reconstructs images directly from the collected data Technology Description GigaPic-3D uses several layers that work together to capture and process an image. Light first passes through an optical layer that directs it onto an array of image sensors. For X-ray imaging, the system includes materials that convert X-rays into visible light that conventional image sensors can detect. Instead of relying on one large image sensor, the camera combines many smaller commercial sensors into a single array. Because the sensors remain in fixed positions, they work together as one imaging system, eliminating the repeated alignment required when combining images from separate cameras. The camera records both the brightness and direction of incoming light. Reconstruction software then creates a high-resolution image, generates 3D views and allows users to refocus the image after it has been captured. Because the system is modular, different image sensors, optical components and detector materials can be combined to meet the needs of different applications while using the same overall camera design. Market Applications Scientific and Research Imaging (astronomy and space imaging, fusion diagnostics) Industrial and Manufacturing (inspection, non-destructive testing, machine vision, advanced manufacturing) Medical and Biomedical (imaging, gigamacro applications) Environmental and Agricultural Monitoring (remote sensing, observation) Cultural Heritage and Preservation (high-resolution imaging, museum-grade digitization) Technology Readiness Level 3 LA-UR-26-28965 US Patent No. 12,574,655
-Special Notice03/06/2027
The True Silicone DLP Printing Platform from Los Alamos National Laboratory allows for more geometries in producing genuine silicone parts, gaskets, lattices, prosthetic components or microfluidic devices on an off-the-shelf desktop printer typically required by specialty extrusion equipment. The result is a material whose polymer backbone is built entirely of silicon-oxygen bonds rather than the carbon-based linkages that quietly compromise so-called silicones on the market today. The True Silicone DLP Printing Platform unlocks that capability through a precursor resin and a paired printing workflow that together deliver real silicone parts free of metal catalyst residues, with tunable porosity, geometric complexity and the aging stability that demanding applications require. How it Works The platform begins with a printable resin that blends a polymerizable scaffold with a curable siloxane component, along with a photoinitiator and a small amount of a light-absorbing dye to control polymerization depth. A standard DLP printer cures the acrylic scaffold layer by layer to lock the geometry in place, after which the part is heated so the siloxane oligomers crosslink into a continuous silicone network alongside the scaffold. A wash in ethanol, water or ammonium hydroxide then dissolves the sacrificial scaffold, leaving behind a pure silicone object whose polymer backbone consists solely of silicon–oxygen bonds and retains a porous structure where the sacrificial scaffold was removed. Technology Description At its core, the True Silicone DLP Printing Platform relies on a printable resin that combines two chemistries chosen to work in tandem: an acrylic component that polymerizes quickly under light to hold the printed geometry, and a silicone component that cures more slowly into the final material. During printing, these two phases remain mixed but separate into interwoven networks, an arrangement that lets the silicone retain the intended shape once the acrylic is later removed. A small amount of light-absorbing dye keeps polymerization confined to the intended pattern, and the resin is engineered to flow and cure reliably on standard DLP hardware. After printing, the part is gently heated to complete formation of the silicone network, then soaked in an alcohol or water-based wash, sometimes assisted by UV light or a mild base, to dissolve away the sacrificial acrylic scaffold. What remains is a silicone object whose polymer backbone is built entirely from silicon-oxygen bonds, with mechanical properties and a controllably porous structure whose open pores can be accessed after printing to imbue the silicone with new functionalities, for example by infusing conductive or otherwise active materials. The overall workflow is compatible with inexpensive commodity printers and lends itself to scaling through emerging light-based manufacturing techniques, while the same scaffold-and-wash strategy offers a template for printing other materials that have historically been difficult to fabricate by photopolymer methods. Advantages Produces true silicone with a continuous silicon-oxygen backbone, avoiding the aging and chemical-compatibility weaknesses of pseudo-silicone alternatives Runs on widely available, low-cost DLP printers rather than specialized direct-ink-write equipment Cures whole layers at once, delivering meaningfully higher throughput than extrusion-based silicone printing Yields parts free of residual metal catalysts, simplifying regulatory and biocompatibility pathways Allows tunable mechanical properties and porosity through resin ratios and porogenic solvent choice Extensible in principle to other material systems that currently resist photopolymer printing through the same sacrificial-scaffold approach Market Applications Medical and Consumer Health (prosthetics, wearable devices, soft implants) Sensing (stretchable circuits, soft robotics components) Microfluidics (lab-on-chip components, custom flow cells) Aerospace and Defense (cushioning foams, vibration-isolation components, sealing parts) Optics and Photonics (soft lenses, light-guiding elements) Consumer and Household Goods (kitchenware, mattresses, apparel components) Development Status: TRL 4 U.S. Patent No. 11,939,415 LA-UR-26-24892 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
-Special Notice01/07/2027
-Awarded07/15/2022

Additional Details

Solicitation Number

75H70719Q00078

Archive Date

Aug 27, 2019