GovChime
Notice ID: 0b947c4bf4f72d297bc5ab7fd56cc27aCombined Synopsis/Solicitation

Information Technology (IT) Specialist AIHC

Archived on November 20, 2019. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM UTC−07:00
Posted
November 8, 2019
Notice type
Combined Synopsis/Solicitation
Set-aside
Indian Small Business Economic Enterprise (ISBEE) Set-Aside (specific to Department of Interior and Indian Health Services)
NAICS
541513: Computer Facilities Management Services

Notice details

Place of performance
Albuquerque Indian Health Clinic 801 Vassar Drive NE, Albuquerque, NM, 87106
PSC
D: IT AND TELECOM - INFORMATION TECHNOLOGY AND TELECOMMUNICATIONS
Last updated
Dec 6, 2025

Identifiers

Solicitation number
75H70720R00001
Notice ID
0b947c4bf4f72d297bc5ab7fd56cc27a

Description

This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will NOT be issued. The solicitation number is 75H70720R00001 and is issued as a Request for Proposals (RFP), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-01. The associated North American Industrial Classification System (NAICS) code for this procurement is 541513 with a small business size standard of $30.00. This requirement is a 100% Set-Aside for Small Business Concerns and only quotes from qualified offerors will be considered. FOB Destination shall be described herein. The Albuquerque Area Indian Health Service (AAIHS), in Albuquerque, New Mexico, Bernalillo County, is seeking proposals from Small Business Indian Firms (SBIF) vendors to provide non-personal services as an Information Technology (IT) Specialist under a non-personal service contract, as described herein. AAIHS is seeking proposals from small businesses that have current staff readily available that would meet our immediate need for IT Specialist Services; this is NOT for a service requirement that involves executive searches, recruiting, testing or screening potential candidates to be hired at a later date. This solicitation is set-aside for Small Business Indian Firms (SBIF) pursuant to the Buy Indian Act 25 U.S.C. 47. If IHS does not receive at least two offers that are reasonably priced offers from SBIF's, IHS will then evaluate quotes and consider award to other small business concerns under the following 5-tier cascading set-aside (in order of first consideration to last consideration): 1st Tier-Small Business Indian Firms 2nd Tier - Service Disabled Veteran Owned Small Businesses 3rd Tier - Certified Hub Zone Small Businesses 4th Tier - Small Disadvantage Businesses 5th Tier-All Other Small Business Concerns. PERIOD OF PERFORMANCE. One year after date of award, with four (4) one-year options periods if modified in accordance with FAR 52.217-9, Option to Extend the Term of the Contract (OCT 2014) and upon written notification by the contracting officer within 30 days of contract expiration. PLACE OF PERFORMANCE. Services are to be provided on site at the Albuquerque Indian Health Clinic (AIHC), located at 801 Vassar Drive NE, Albuquerque, New Mexico 87106-2725. DESCRIPTION OF REQUIREMENT. This position serves as an IT Specialist for Computers and Telecommunications for the Management Information Systems (MIS) at the Albuquerque Indian Health Clinic (AIHC). The incumbent provides technical and administrative duties associated with the management Computer Systems/Applications and Voice/Data Telecommunications. The IT Department at the AIHC supports the service unit medical applications that run on a main system, server, LAN voice telecommunications, area wide network and personal computers. The Government will periodically evaluate the Contractor's performance. The Contracting Officer's Representative will evaluate the Contractor's performance through intermittent inspections of the Contractor's work. The skill set for the HR support will be substantially similar to the skill set required of the civil service OPM 2210 series with competence at the GS-11 level for a IT Specialist. The AAIHS has ESTIMATED that the hour worked will be a total of 2080 hour per year, with no overtime allowed on this contract. Offerors interested in submitting proposals for this requirement MUST submit the following: 1. Complete resume(s) of the contractor's employee(s) that clearly demonstrates the capability to provide IT Specialist services is required (if more than one employee would be able to provide services under the contract, please include all resumes). In order to fully evaluate each proposal, the resume(s) must include: (a) all paid and non-paid experience, job title, location(s), dates held (month/year), and hours worked per week for each position. Any experience that does not include all the information requested will not be counted towards meeting the solicitation requirements. (b) Specific duties performed that fully detail the level and complexity of the work. (c) Names and contact information (phone and email) of current and/or previous supervisor(s). (d) Education and any other qualifications including job-related training courses, job-related skills, or job-related honors, awards or accomplishments. (e) U.S. Citizenship status. 2. A written proposal that specifically details how they will provide services (Technical Qualifications) under this requirement. The technical qualifications must clearly demonstrate and detail the contractor's employee's proficiency in Information Technology support. 3. Past Performance information that details the length (minimum of 5 years) of any previous contracts similar to the size and scope of the AAIHS requirement. 4. Pricing proposed shall be an all-inclusive rate that includes all state, federal, and local taxes (ex. NM Gross Receipts" taxes) and any miscellaneous costs associated with the above services. Pricing proposals should be itemized to detail an hourly rate and based on an estimated 40-hour work week, and for a yearly duration of 250 business days (that excludes weekends and federal holidays). A summary should be provided for one base year and an additional four (4) one -year option periods assuming the same durations of 250 business days per year (i.e., five (5) years in total). It is the sole responsibility of the contractor to collect and pay for any New Mexico State Gross Receipt Taxes for work performed in the State of New Mexico, regardless of the physical location the work was performed. Pricing in proposals MUST be good for 30 calendar days after close of solicitation. Failure to provide any required items will result in the offer being determined as non-responsive. Resumes should contain clear information to make a valid determination that the experience requirements are fully met as stated in this solicitation. All required information should be clearly identified in the resume and failure to provide any required information to make a determination on qualifications will result in loss of full consideration. Offerors can expect to receive a confirmation email when offer materials have been received. Offerors should retain for their records copies of all enclosures which accompany their offers. Any questions on this solicitation may be directed to: Genevieve.monk@ihs.gov. *Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by email. Questions not received within a reasonable time prior to close of the solicitation may not be considered. BASIS FOR AWARD: FAR 52.212-2 Evaluation - Commercial Items (OCT 2014) (a) The Government will award one contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: (i) Technical Qualifications and (ii) Past Performance. Technical Qualification and past performance, when combined, are significantly more important than price. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. PAST PERFORMANCE EVALUATION. The Offeror will be evaluated to assess the demonstrated quality of performance on similar work, to include the ability to control the quality and cost of work, timeliness of performance, and effectiveness at accomplishing the goals of previous work. TECHNICAL EVALUATION. Evaluating the Offeror's technical qualifications (capability) to fulfill the tasks in the SOW, as well as the contractor's employee's experience and education, will be the most important. However, the Offeror may propose a blend of seasoned staff to provide the AAIHS with the best blend and cost associated with the effort. PRICE EVALUATION. The price proposals shall be evaluated to determine the Offeror's ability to carry out its proposed technical approach and indicate that the Offeror understands the nature and extent of the work to be performed. The price evaluation will not be point scored. QUESTIONS In accordance with FAR 15.201 Exchanges with Industry before receipt of proposals, please refer to solicitation 75H70720R00001 - IT Specialist -questions, when requesting information regarding the solicitation via e-mail to genevieve.monk@ihs.gov, facsimile: (505) 256-6848 or phone: (505) 256-6751. PROPOSAL SUBMITTALS Only via email: genevieve.monk@ihs.gov, with subject line: 75H70720R00001 - IT Specialist - Proposal DATA UNIVERSAL NUMBERING SYSTEM (DUNS) NUMBERS AND THE SYSTEM FOR AWARD MANAGEMENT. By submitting a proposal, the vendor will be self-certifying that neither the Offeror nor the principal corporate officials and owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. Through its submission, the vendor acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance and through final payment of any contract resulting from this solicitation. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. TAXES: Non-personal service contractors are required to pay Federal Income Taxes, FICA, and Medicare. FAR 52.229-3 Federal, State, and Local Taxes (Feb 2013) will be incorporated by reference. This Contract incorporates some HHSAR provisions/clauses by reference, with the same force and affect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these addresses: http://www.hhs.gov/policies/hhsar/subpart352.html. HHSAR CLAUSES- 352.211-3 Paperwork Reduction Act (Dec 2015) 352.222-70 Contractor Cooperation in Equal Employment Opportunity Investigations (Dec 2015) 352.227-70 Publications and Publicity (Dec 2015) 352.237-75 Key Personnel (Dec 2015) For general information about DUNS Numbers and SAM, please refer to Federal Acquisition Regulation (FAR) Clause 52.204-6, Data Universal Numbering System (DUNS) Number and FAR 52.204-7, System for Award Management. https:/acquisition.gov/far/current/html/52_200_206.html or www.sam.gov. NOTE REGARDING GOVERNMENT OBLIGATIONS FOR THIS SOLICITATION. This solicitation in no way obligates the AAIHS to award a service contract, nor does it commit the AAIHS to pay any costs incurred in the preparation and submission of the offer.

Full description on SAM.gov

Award Overview

Mentioned in the description

From description, unverified
Albuquerque Indian Health Clinic (AIHC). The incumbent provides technical and administrative duties

We searched the solicitation description for the word “incumbent” and surfaced the surrounding text. This is not a confirmed match.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:75H70720R00001
  1. Combined Synopsis
  1. Combined SynopsisCurrentNov 8, 2019

    Information Technology (IT) Specialist AIHC

    Notice 0b947c4bf4f72d297bc5ab7fd56cc27a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
NOTICE OF INTENT TO SOLE SOURCE Agency: Indian Health Service (IHS), Albuquerque Area Office PSC: DA10 NAICS: 541519 Other Computer Related Services Notice Type: Special Notice - Intent to Sole Source Authority: FAR 6.302-1 Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements Set-Aside: Not Applicable 1. Description of Requirement The Indian Health Service (IHS), Albuquerque Area Office (AAO), Albuquerque Indian Dental Clinic (AIDC), intends to issue a sole source commercial item contract under FAR Part 12 for proprietary technical support and preventative mainteance for the Dentrix Enterprise Practive Management System. These services are provided exclusively by: UEI: YEGDA6XVFCN3 Vendor: Henry Schein Practice Solutions Inc. Address: 1220 S 630 E Ste 100 American Fork, UT 84003-3917 Required services include: Dentrix Enterprise Software Technical Support Troubleshooting and issue resolution Manufacturerer issued software updates, patches, and version upgrades Preventative maintenance and system health checks Certified Dentrix Enterprise technical expertise Support for charting, billing, scheduling, imaging interfaces, reporting, and analytics These proprietary services directly support the Albuquerque Indian Dental Clinic's clinical operations and integrate with existing RPMS/EHR and imaging systems. Licensing and support are controlled solely by the software manufacturer under FAR 12.212. 2. Justification for Sole Source Market research confirms that Henry Schein Practice Solutions Inc. is the only responsible source capable of providing certified support, manufacturer issued upgrades, and proprietary maintenance for the Dentrix Enterprise system. No other vendor possesses legal authorization, proprietary access, or technical capability to perform updates or maintenance on the Dentrix Enterprise environment. A sole source procurement is therefore justified under FAR 6.302-1. 3. This Notice is not a request for quotes This Special Notice serves only to announce the Government's intent to negotiatee solely with Henry Schein Practice Solutions Inc. No competitive solicitation will be released. 4. Capability Statement Instructions Interested parties may submit a capability statement only if they can demonstrate: Legal authorization or licensing rights to provide Dentrix Enterprise support Ability to perform manufacturer issued updates, patches, and version upgrades Ability to provide certified Dentrix Enterprise technicians Full compatibility with existing IHS systems without requiring platform replacement, migrations, or modification of Dentrix Enterprise Capability statements proposing alternative software solutions or system migration will not be considered. 5. Response Deadline Responses must be submitted by Wednesday, November 25, 2026, at 12 PM MS. Please send responses to Stephanie Begay, Stephanie.Begay3@ihs.gov. 6. Intended Award If no valid capability statements are received, the Government will award a sole source commercial contract to Henry Schein Practice Solutions Inc. under FAR 6.302-1. 7. Period of Performance Base Year: 12/01/2026 - 11/30/2027 OY #1: 12/01/2027 - 11/30/2028 OY #2: 12/01/2028 - 11/30/2029 OY #3: 12/01/2029 - 11/30/2030 OY #4: 12/01/2030 - 11/30/2031
-Special Notice11/25/2026
The United States Department of Agriculture (USDA) Forest Service (FS) is conducting market research to identify capable sources to repair SILVAH version 8 in C++ code to then work with scientific staff to produce a new SILVAH version 9 coning some features from SILVAH 7 and 8.
-Market Research11/11/2026
Imagine loading an irregular block of metal, or a finished curved part, into a single station and walking away with precisely cut samples, no specialized machining expertise required. Scan-to-Sample from Los Alamos National Laboratory makes that possible by weaving 3D scanning, design software and computer-guided cutting into one continuous digital thread, running from the first scan straight through to the finished part. The system captures the true shape of the starting material, however curved or complex, then plans and carries out the cuts on its own, sparing operators the slow, error-prone job of hand-aligning and re-zeroing equipment for every specimen. The payoff is faster turnaround, less wasted material and consistent, repeatable quality, bringing advanced machining within reach of a far wider range of users and parts. How it Works The workflow begins when a scanning device, such as a laser scanner, optical scanner or contact probe, captures the exact geometry of the incoming material or part and produces an accurate digital 3D model. Design software then imports that model, where an operator marks the locations, orientations and sizes of the samples or features wanted, and the software calculates the tool paths needed to reach them. Those tool paths are converted into machine instructions, typically a G-code file, and loaded onto a computer numerical control machine, which secures the material and cuts the specimens by following the programmed paths without manual re-zeroing. After cutting, the finished part can be scanned again and compared against the original model to confirm that every specimen meets the required tolerances. Technical Description At its core, Scan-to-Sample links four cooperating elements: i) a scanning device that records the dimensional, geometric and surface characteristics of the workpiece; ii) an operations device that builds a watertight 3D model and generates the cutting program; iii) a machining apparatus such as a multi-axis CNC mill, turning center, grinder, laser or wire EDM system; and iv) a monitoring apparatus that verifies the outcome. The operations device applies a sample extraction model, which carries the functionality of standard CAD and CAM tools, to the 3D model so as to map sampling locations onto the true contours of the part and to derive the tool paths, cutting tools, spindle speeds, feed rates and fixturing choices suited to the material and its tolerances. Because the pipeline is driven by the scanned geometry rather than by fixed programming, it adapts to each unique part and supports two complementary modes of use. In sampling mode, the system extracts small test specimens from complex, non-linear components such as turbine blades or gear teeth, for mechanical testing and analysis. In fabrication mode, the same approach reads a raw or partially formed blank, billet or bar and produces a finished component from it, giving users an experience similar to the guided interfaces common in additive manufacturing. A closed feedback step compares the machined result against the digital model, allowing the system to flag deviations, take an additional sample or stop safely, which keeps quality consistent across every run. Advantages • Removes the slow, error-prone need to align and re-zero the machine by hand for every sample • Lowers the skill barrier, letting users with little machining experience produce complex parts • Handles irregular and curved stock that is hard to fixture and cut by conventional means • Reduces material waste when many small parts are taken from a single piece • Consolidates scanning, design and machining into one connected workflow • Improves precision, repeatability and sample yield across multiple runs Market Applications • Aerospace and Space Systems (turbine blade sampling, launch and propulsion component fabrication) • Power Generation and Energy (gear and turbine component testing) • Materials Research (mechanical behavior specimens for characterization) • Precision Manufacturing (custom parts from irregular or raw stock) • Automotive (drivetrain and gear inspection) • Quality Assurance and Metrology (dimensional verification and defect analysis) TRL 4 US Patent pending LA-UR-26-29796 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
-Special Notice04/02/2027
The contractor shall provide engineering, acquisition, and sustainment services to develop, maintain, and sustain modern hardware+software solutions for USAF aircraft flight recorder download and data decompression / transcription. This effort encompasses developing download capabilities for both full-up (undamaged) flight recorders and bench-level extracted Circuit Card Assemblies (CCA) across diverse solid-state recorder architectures. All software and hardware interfaces developed must execute on modern computer hardware and operating systems (e.g., Red Hat Enterprise Linux or Microsoft Windows) and yield output file formats fully compatible with Original Equipment Manufacturer (OEM) data decompression and transcription software tools.
-Market Research10/28/2026
Workforce shortages and uncertainties have derailed nuclear projects worldwide—causing delays, cost overruns and lost investor confidence. The specialized talent nuclear needs to succeed requires years to develop. The ReactorCast platform answers human capital questions, coupled to strategic decisions and financial considerations, before the issues become crises. ReactorCast is a custom system dynamics platform that models and ties strategic decisions and investment considerations with workforce requirements across the entire lifecycle of nuclear programs—from initial planning through decades of operation to eventual decommissioning. The platform provides real-time analytics and visual dashboards that track workforce flows from identified populations to education and training programs through employment across utilities, developers, contractors, regulators and support organizations. ReactorCast also models the impact of policy, regulatory and investment decisions on workforce development trajectories. Unlike individual HR management systems, ReactorCast operates at the strategic level—modeling the workforce potential to answer questions that matter most to executives, investors and leaders: Can this organization or region supply the talent we need? What does workforce availability mean for our site selection? How do different technology choices impact long-term staffing costs? These aren’t HR questions—they’re business strategy questions. The underlying modeling methodology— developed at Los Alamos and licensed to the IAEA as the basis for their national nuclear workforce planning workshops and tools—has been applied internationally across numerous nuclear programs LA-UR-26-23908 Technical Specifications Custom developed software for system dynamics modeling Modular, extensible design for evolving analysis needs Local deployment (secure, non-cloud infrastructure framework) Interfaces with external data sources and planning tools Outputs include: regional, statewide or national mapping, workforce opportunities and competency projections, gap analyses and scenario-based deployment comparisons For those realizing new nuclear deployments, ReactorCast models workforce requirements across different reactor technologies and sites. Compare the human capital implications of a large light-water reactor versus multiple small modular reactors. Assess whether different reactor technologies affect your ability to recruit and retain talent in specific regions. Understand how workforce costs—which can exceed capital costs over a plant’s lifetime—vary based on technology and location decisions made today. ReactorCast separates serious strategic planning from optimistic assumptions, giving stakeholders the intelligence to make informed decisions about workforce-related project risk. Advantages Reactor Technology Differentiation: Different reactor technologies may potentially require fundamentally different workforce profiles. ReactorCast can model the varying implications and makes the trade-offs and considerations visible. This platform helps identify strategies for closing any gaps before commitments are made. With access to Los Alamos’s unique technical domain and expertise, the technical nuances between these designs can be quantized, incorporated and analyzed. Strategic Site Selection and Regional Assessment: Site selection for nuclear projects traditionally focuses on technical factors including: cooling water availability, seismic stability, grid connection and emergency planning zones. ReactorCast adds the workforce dimension that determines whether a technically perfect site can support successful project execution, and if it can’t, models strategic approaches for how to mitigate this risk. Location decisions made for workforce reasons create competitive advantages. A site chosen because it has workforce capacity that competitors overlooked becomes a strategic asset. Cost control, schedule discipline, regulatory strategy, stakeholder engagement and workforce planning are equally essential for nuclear’s success. Strategic Modeling Capability Points / Market Applications Real-time analytics and visual dashboards derived from custom developed stock-and-flow workforce dynamics software Multi-reactor technology comparison Lifecycle cost modeling (planning through decommissioning) Scenario planning and risk assessment tools Customizable for regional, statewide or multi-site contexts LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
-Special Notice06/30/2027

Additional Details

Solicitation Number

75H70720R00001

Archive Date

Nov 20, 2019