GovChime
Notice ID: 862fa226aafb4a23a6b34c8a616a1b11Combined Synopsis/Solicitation

ACLIHC - Reagents and Supplies

Archived on June 22, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM UTC−06:00
Posted
May 14, 2024
Notice type
Combined Synopsis/Solicitation
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of Health and Human ServicesINDIAN HEALTH SERVICE

Notice details

Office
ALBUQUERQUE AREA INDIAN HEALTH SVC
Place of performance
Pueblo of Acoma, NM, 87034
Last updated
Dec 4, 2025

Identifiers

Solicitation number
75H70724Q00049
Notice ID
862fa226aafb4a23a6b34c8a616a1b11

Description

The Indian Health Service, Albuquerque Area Office, Acoma-Canoncito-Laguna Indian Health Center has requirement for Reagents, Supplies and other necessary items to use with the Vitros 5600 Integrated System for their Clinical Laboratory located at 80B Veterans Blvd., Acoma, New Mexico 87034. This requirement will be full and open competition for any Large Business who could full this requirement as stated in the terms and conditions of this solicitation. ONLY ONE AWARD WILL BE MADE FOR THESE SUPPLIES.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:75H70724Q00049
  1. Combined Synopsis
  1. Combined SynopsisCurrentMay 14, 2024

    ACLIHC - Reagents and Supplies

    Notice 862fa226aafb4a23a6b34c8a616a1b11 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Value Proposition: ThermaSpin, developed by scientists at Los Alamos National Laboratory, provides a reliable, cost-effective way to measure the flow behavior (viscosity) of extremely hot and reactive liquids, such as molten salts and metals, under realistic operating conditions. Unlike existing solutions that are expensive, complex or poorly suited for low-viscosity fluids, this enclosed high-temperature viscometer delivers high sensitivity, small sample requirements and precise atmospheric control, enabling accurate measurements without exposing materials to air or contamination. This capability is critical for industries such as advanced nuclear energy, thermal energy storage and high-temperature materials processing, where fluid properties directly impact system performance, safety and design. By making these measurements more accessible and practical, the ThermaSpin High-Temperature Viscometer reduces development risk, lowers testing costs and accelerates innovation in next-generation energy and industrial systems. The Challenge: Accurately measuring the viscosity of molten salts and other high-temperature liquids is extremely difficult because these materials exist under harsh conditions—temperatures approaching 1,000°C, high chemical reactivity and sensitivity to air and moisture. Traditional measurement techniques often lack the sensitivity needed for these low-viscosity fluids or require specialized, resource-intensive methods that are not widely accessible. In addition, many approaches demand large sample volumes, which can be impractical or hazardous when working with corrosive or toxic materials. Maintaining a controlled environment during testing further complicates measurements, as even minor contamination can alter results. Together, these challenges create a significant barrier to obtaining reliable data on fluid behavior in systems where precise performance understanding is essential. Problems Solved: ThermaSpin High-Temperature Viscometer addresses these challenges by providing a sealed, high-temperature measurement system that can operate reliably in extreme environments while maintaining strict control over sample purity. Its rotational design, coupled with a highly sensitive torsion-based measurement approach, enables accurate detection of the very low forces associated with low-viscosity molten fluids—something conventional instruments struggle to achieve. The enclosed architecture allows operation under inert or controlled atmospheres, preventing contamination from air or moisture, while also supporting smaller sample sizes to reduce risk and material constraints. By integrating temperature resilience, corrosion compatibility and precise mechanical measurement into a single platform, ThermaSpin overcomes the key technical and practical limitations that have historically restricted viscosity characterization in these demanding conditions. Key Advantages: Extreme temperature capability (~1000°C): Reliable operation for molten salts, metals and other high-temperature fluids High sensitivity for low-viscosity liquids: Accurately captures subtle flow behavior that conventional viscometers miss Sealed, controlled environment: Maintains sample purity by preventing exposure to air and moisture Handles corrosive and hazardous materials: Durable design compatible with chemically aggressive substances and smaller sample sizes No specialized infrastructure required: Eliminates dependence on costly, limited-access techniques like neutron imaging Versatile and integration-ready: Adaptable to multiple applications and compatible with inert atmosphere systems (e.g., glove boxes) Market Applications: Advanced Nuclear Energy: Molten salt reactors (MSRs), fusion systems and fuel cycle development Thermal Energy Storage & CSP: High-temperature heat transfer and storage fluids for renewable energy systems Metallurgy & Metal Processing: Molten metal monitoring in refining, casting and advanced manufacturing Chemical Processing: High-temperature and corrosive fluid handling in industrial chemical production Research & Development: National labs, academia and industry studying thermophysical properties of extreme-condition materials Defense & Government Applications: Controlled characterization of hazardous or sensitive molten materials in secure environments Development Status: TRL 3 US Patent pending LA-UR-26-26227 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
-Special Notice04/01/2027
Scientists at Los Alamos National Laboratory developed the Spectrometer Purposed for Accelerator Testing and Characterization (SPATC) — a portable, easy-to-use device that allows the safe measurement of the power and energy of electron beams from particle accelerators, helping labs test and fine-tune equipment more efficiently. How it Works: SPATC uses a smart, compact design to deliver high-precision beam diagnostics conveniently. At its core, SPATC employs two precisely controlled aluminum wedges that slide together to vary thickness, allowing engineers to analyze how an electron beam’s energy interacts with the material. As the beam passes through these layers, sensors record how much energy is absorbed versus transmitted, and a graphite block captures the remaining beam for accurate current readings. Controlled remotely via computer, SPATC provides real-time data on beam energy and current—without breaking vacuum or requiring complex setup. Designed for flexibility and speed, it offers industries a reliable, low-cost, and portable solution to ensure accelerator performance meets exacting standards for research, manufacturing, or medical applications. Key Advantages: Portable and Compact: Fits into a single rugged case for easy transport and setup at any facility. Fast, Accurate Measurements: Determines beam energy and current in under an hour, minimizing downtime. Remote Operation: Fully controllable from outside the accelerator vault, improving safety and efficiency. Non-invasive Testing: Performs measurements in open air without breaking the accelerator’s vacuum. Precision Engineering: Stepper motor-driven wedges provide fine control over measurement thickness for high accuracy. Enhanced Safety: Reduces radiation exposure by eliminating the need for manual adjustments near the beam. Market Applications: Medical and Radiation Therapy Facilities: Ensures precise calibration of electron beams used in cancer treatment systems. Industrial Accelerator Operations: Enables quick verification of beam performance for material processing, sterilization, and imaging. Research Laboratories and Universities: Provides affordable, portable diagnostics for accelerator-based experiments. Accelerator Manufacturers: Offers a built-in quality assurance tool for testing and characterizing new accelerator systems. Defense and Security Applications: Supports beam validation in systems used for cargo inspection or nondestructive testing. Equipment Service and Maintenance Providers: Allows on-site testing and troubleshooting of accelerators without large diagnostic setups. Development Status: TRL 7 US Patent Pending LA-UR-26-27021 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
-Special Notice02/01/2027
The UltraGraph Membrane Extraction System from Los Alamos National Laboratory is a compact, modular device that separates and recovers targeted materials from liquid mixtures using an ultra-thin graphene membrane. The system achieves mass transfer performance comparable to conventional separation equipment with active areas 250 times larger. Its building-block design, chemically stable materials and compatibility with standard laboratory fittings allow it to serve a wide range of applications in chemical separations, recovery purifications and biological sample preparation. Organizations can integrate the UltraGraph system into existing laboratory infrastructure with minimal modification, reducing the cost and complexity of adoption. How it Works The UltraGraph system flows two different liquids through separate microchannels etched into quartz substrates, with a three-layer membrane positioned between them. The membrane consists of a monolayer sheet of graphene held between two porous formvar polymer films, each approximately 125 nanometers thick. The formvar layers are permeable, allowing liquid to reach the graphene surface, while the graphene itself blocks the bulk fluids but permits selected ions or particles to transfer across. Liquids can run co-currently or counter-currently depending on the separation task, enabling controlled mass transfer, ion exchange or heat exchange without the two fluids ever mixing. The assembly is secured between steel plates that compress the quartz chips and ETFE gaskets together, forming a leak-resistant seal that connects to standard screw-port fittings. Technical Description The graphene at the center of the membrane is grown via chemical vapor deposition on copper foil and transferred onto formvar support films using a proprietary process that is one to two orders of magnitude faster than conventional PMMA-based transfer methods. The formvar films have tunable porosity ranging from 20% to 60%. At approximately 125 nanometers thick with an elastic modulus of 7.8 GPa, the formvar provides sufficient mechanical support for atomically thin graphene across 100-micrometer-wide channels at flow rates up to 25 microliters per minute. The graphene layer can be functionalized with oxide groups, nanoparticles or engineered pores to adjust selectivity for specific ions or molecules. The total membrane thickness is approximately 250 nanometers, which is orders of magnitude thinner than membranes used in conventional microfluidic separation devices. The quartz microchannel substrates can be configured in patterns ranging from single channels to branching multi-channel networks and radially extending circular designs. In laboratory testing, the system achieved a pH change of approximately 4 in deionized water contacted with an organic triethylamine solution across the graphene membrane, matching the output of a commercial system whose mass transfer area was 250 times larger. The four-channel counter-current configuration demonstrated 17.4% triethylamine transfer at 15 microliters per minute, on par with that commercial benchmark. The modular stacking design allows additional substrate-membrane pairs to be layered to increase throughput without redesigning the housing, and scaling estimates project that a cylindrical multi-layer assembly could process 26 milliliters per minute across more than 1,000 channels. Because the quartz chips are reusable and the membrane materials are inexpensive to produce, the system lowers the economic discard limit for recoverable materials that might otherwise be classified as waste. Advantages High efficiency in a compact form factor — performs comparably to systems with separation areas 250 times larger Tunable selectivity — the graphene membrane can be chemically modified to target specific ions, molecules or particles Modular and scalable — additional chip-and-membrane layers can be stacked to increase capacity without a full redesign Chemically stable and radiation resistant — formvar support layers are inert to most chemicals and tolerate radiation exposure, suiting the system to demanding operating environments Low-cost and reusable components — quartz chips can be reused, membranes are inexpensive to manufacture and standard connectors simplify integration Leak-resistant design — ETFE gaskets and a compression housing address the leakage issues common in prior microfluidic membrane systems Market Applications Water Treatment and Desalination (ion removal, brine processing, contaminant filtration) Pharmaceutical and Biotechnology (drug compound purification, sample preparation, protein separation) Chemical Manufacturing (solvent extraction, chemical purification, catalyst recovery) Environmental Remediation (industrial wastewater treatment, heavy metal removal, pollution control) Medical Diagnostics and Research (blood and plasma separation, point-of-care sample processing, analytical chemistry) TRL 4 LA-UR-26-24077 US Patent No. 11,471,838 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
-Special Notice09/30/2026
(i)This is a combined synopsis/solicitation for commercial items prepared in accordancewith FAR Subpart 12.6, as supplemented with additional information included in thisnotice. This announcement constitutes the only solicitation; proposals are beingrequested, and a separate written solicitation will not be issued. (ii)The solicitation number is 75N98027Q00077. This solicitation is issued as a competitiveRequest for Quotation (RFQ) / combined synopsis/solicitation for commercial productsand commercial services using a Brand Name restriction in accordance with FAR 13.106-1(b)(1)(i). A Brand Name Justification is attached to this notice in accordance with FAR5.102(a)(6). This acquisition is conducted under the authority of FAR 12.603, StreamlinedSolicitation for Commercial Products or Commercial Services, in conjunction with FAR Part13 Simplified Acquisition Procedures, and is not expected to exceed the simplifiedacquisition threshold. The National Institutes of Health (NIH), Office of the Director, Officeof Acquisitions, seeks to award a Firm-Fixed-Price (FFP) Purchase Order to theresponsible offeror whose quotation represents the best value to the Government. (iii)The solicitation document and incorporated provisions and clauses are those in effectthrough Federal Acquisition Circular (FAC) number 2026-01 and effective date 03/13/2026. (iv)The associated NAICS code is 334516 (Analytical Laboratory InstrumentManufacturing), and the small business size standard is 1,000 employees. The ProductService Code (PSC) is 6640 (Laboratory Equipment and Supplies). [X]This requirement is set aside for Small Business concerns.
-Combined Synopsis11/24/2026
(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested, and a separate written solicitation will not be issued. (ii) The solicitation number is 75N98027Q00072. This solicitation is issued as a competitive combined synopsis/solicitation for commercial products or commercial services restricted to the Brand Name specified herein in accordance with FAR 13.106-1(b)(1)(i). The Government intends to award a firm-fixed-price purchase order resulting from this solicitation using competition among the Original Equipment Manufacturer (OEM) and its authorized distributors. This acquisition is conducted under the authority of FAR 12.603, Streamlined Solicitation for Commercial Products or Commercial Services, and is not expected to exceed the simplified acquisition threshold. The National Institutes of Health (NIH), Office of the Director, Office of Acquisitions, on behalf of the National Heart, Lung, and Blood Institute (NHLBI), seeks to award a firm-fixed-price purchase order to the responsible offeror whose proposal represents the best value to the Government. (iii) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01, effective 03/13/2026. (iv) The associated NAICS code is 334516 (Analytical Laboratory Instrument Manufacturing), and the small business size standard is 1,000 employees. ¿ This requirement is unrestricted. (v) Description of Requirement: The National Heart, Lung, and Blood Institute (NHLBI), Laboratory of Advanced Microscopy and Biophotonics (LAMB), requires one (1) Brand Name Spectra-Physics (Newport Corporation / MKS Instruments) InSight® X3¿ Dual Ultrafast Laser System to integrate with an existing Thorlabs Veneto inverted multiphoton microscope for Fluorescence Lifetime Imaging Microscopy (FLIM) and Stimulated Raman Scattering (SRS) pump-probe experiments studying the effects of chemotherapeutic agents on cellular metabolism.
-Combined Synopsis11/20/2026

Additional Details

Solicitation Number

75H70724Q00049

Archive Date

Jun 22, 2024

Office Address

ALBUQUERQUE, NM, 87110