Notice ID: 9bc8ae9086b04b8b95b8f8f0f05aa9aeSolicitationArchived
KHC DENTAL SURGIC PRO 2
Archived on September 1, 2025. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 10:00 AM EDT
- Posted
- August 29, 2025
- Notice type
- Solicitation
- Set-aside
- Indian Small Business Economic Enterprise (ISBEE) Set-Aside (specific to Department of Interior and Indian Health Services)
- NAICS
- 339112: Surgical and Medical Instrument Manufacturing
- Agency
- Department of Health and Human ServicesINDIAN HEALTH SERVICE
Notice details
- Office
- NAVAJO AREA INDIAN HEALTH SVC
- Place of performance
- Kayenta, 86033
- Last updated
- Nov 9, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- 75H71025Q00317
- Notice ID
- 9bc8ae9086b04b8b95b8f8f0f05aa9ae
Description
This is an Indian-Owned Small Business Economic Enterprise (ISBEE) set-aside solicitation. This requirement is for Dental Surgical handpieces and motors, please see attachment A: Specification for details. The government will keep this solicitation posted and open for quotes until September 1, 2025, at 10:00 AM (ET).
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Files (1)
- Download
TAB 12 75H71025Q00317 SOLICITATION.pdf
1.8 MBAdded in Solicitation version 3Posted
Lifecycle
- 3Version 3SolicitationArchivedCurrent
KHC DENTAL SURGIC PRO 2
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
1.0 DESCRIPTION THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a solicitation for bids, proposals, proposal abstracts, or quotations. The Department of Veterans Affairs (VA) Enterprise Procurement Office (EPO), formerly the Strategic Acquisition Center (SAC), is issuing this Sources Sought Notice as a means of conducting market research to identify qualified sources with the capability and resources to meet the Veterans Health Administration s (VHA) Non-Expendable Equipment National Program requirement for Microscopes, Light, Operating, Dental. The EPO in conjunction with VHA is seeking qualified sources capable of supplying the ZEISS OPMI PROergo, Microscopes, Light, Operating, Dental on an agency-wide basis. VA is contemplating the award of a single Requirements Contract with Firm-Fixed Price (FFP) orders IAW FAR 16.503, Requirements Contracts, to a supplier of this equipment. Respondents will be required to deliver complete light operating dental microscope systems to VA medical centers and facilities throughout the United States. The associated North American Industry Classification System (NAICS) code for this procurement is 339112 - Surgical and Medical Instrument Manufacturing and the associated size standard is 1,000 employees. The FAR Provision found at 52.204-7 requires that The Offeror shall have an active Federal Government contracts registration in the System for Award Management (SAM) when submitting an offer or quotation. You may access the SAM website at SAM.gov | Home. All respondents must be certified with the appropriate NAICS code on the SAM website. All SDVOSB/VOSB respondents must be verified in the SBA database at: https://www.sba.gov/veterans/#vetcert at the time of submission. Submissions for this Sources Sought Notice shall be submitted by email no later than October 16, 2026, at 12:00pm Eastern Time to the Contract Specialist and Contracting Officer at the following email addresses: Alanna.Wilson@va.gov Anthony.Zibolski@va.gov Email responses shall include the following subject line: Response to Sources Sought Notice 36C10X26Q0285. This notice is for planning purposes only and does not constitute a commitment on the part of the Government to award a contract, nor does the Government intend to pay for any information submitted as a result of this notice. This notice is part of a continuous process for obtaining the latest information on the commercial status of the industry with respect to their current and near-term abilities. The information provided herein is subject to change and in no way binds the Government to solicit for, or award, a competitive contract. It is emphasized that this is a notice solely for planning and informational purposes. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. The Government may or may not issue a solicitation as a result of this notice. There is no solicitation available at this time. 2.0 SCOPE OF WORK Microscopes, Light, Operating, Dental is a specialized magnification and illumination system used in dentistry to enhance visibility of fine anatomical details inside the mouth, especially in FboNotice canals, microsurgery, and restorative work. It is mounted on an articulating arm from the ceiling, wall, floor/mobile, between the patient and clinician, allowing the dentist to see structures at 4 to 25 times their actual size without leaning closer. The ZEISS OPMI PROergo, Microscopes, Light, Operating, Dental has been identified through VA s market research to date as the only known surgical dental microscope capable of a magnification range from 2.0x to 39x, with motorized magnification and focal adjustments for wide-field or detailed views. The following Contract Line Items (CLINs) are being considered: Contract Line Items Manufacturer Part Number Description 0001 Carl Zeiss 000000-2234-65701PADVAN Advanced Package 0002 Carl Zeiss 000000-2234-65701PECEPH Essential Package Halogen 0003 Carl Zeiss 000000-2234-657CENTRO S7 Centro S7 0004 Carl Zeiss 000000-2234-657DECKES7HUB Ceil. mount S7 lifting column 0005 Carl Zeiss 000000-2234-65701PECAPA Advanced Package 0006 Carl Zeiss 000000-2234-657WAND S7 LANG Wallmount S7 long 0007 Carl Zeiss 000000-2234-65701PECEPX Essential Package Xenon 0008 Carl Zeiss 000000-2234-657WAND S7 Wall mount S7 0009 Carl Zeiss 000000-2234-657BODENS7 Floor stand S7 0010 Carl Zeiss 000000-2234-65701PROERGO OPMI PROergo 0011 Carl Zeiss 000000-2234-65720COTI10 Stereo co-observation 180° 0012 Carl Zeiss 000000-2234-657DECKES7STARR Ceiling mount S7 fixed column 0013 Carl Zeiss 000000-2234-657FALT Foldable Tube not mouth switch 0014 Carl Zeiss 000000-2234-657SCHWENK 180° tiltable tube f=170 0015 Carl Zeiss 000000-2234-657SETHERAEUSZWEI Set f.two Heraeus illumin. 0016 Carl Zeiss 000000-2234-65742 VCM-Kit (only Assembly) 0017 Carl Zeiss 000000-2234-65720COST10 Stereo coobs. str. tube 10x 0018 Carl Zeiss 000000-2234-657SPEEDFOKUS-M SpeedFocus with MediLive Tabl. 0019 Carl Zeiss 000000-2234-657SPEEDFOKUS-L SpeedFocus with Lemo cable 0020 Carl Zeiss 000000-2234-65726 flexural element 0021 Carl Zeiss 000000-2234-657SPEEDFOKUS-S SpeedFocus with standard cable 0022 Carl Zeiss 000000-2234-657HD 1Chip HD camera 0023 Carl Zeiss 000000-2234-657SPEED Speedgoat GmbH 0024 Carl Zeiss 000000-2234-657SETHERAEUSEIN Set f.one Heraeus illumin. 0025 Carl Zeiss 000000-2234-657VERKLGR33 Panel pre-inst.set,higher 3,3m 0026 Carl Zeiss 000000-2234-657VERKLSTARR Paneling pre-inst.set,rigid 0027 Carl Zeiss 000000-2234-657XENO Xenon light S7 0028 Carl Zeiss 000000-2234-657WINK_MIT_ROT Angled w/ side port & rot.adap 0029 Carl Zeiss 000000-2234-657HDKAB HD Recorder with cables 0030 Carl Zeiss 000000-2234-657WINK_MIT Angled optics w/ side port 0031 Carl Zeiss 000000-2234-657HDT20 Beam splitter 20 0032 Carl Zeiss 000000-2234-657T20 Beam splitter 20 0033 Carl Zeiss 000000-2234-657FLEXIOSTILL Flexio Still Adapter 0034 Carl Zeiss 000000-2234-657T50 Beam splitter 50 0035 Carl Zeiss 000000-2234-657WINK_OHNE_ROT Angled w/ rot. adapter 0036 Carl Zeiss 000000-2234-657AT50 Beamsplitter 50 0037 Carl Zeiss 000000-2234-657FLEXIOMOTION Flexio Motion Adapter 0038 Carl Zeiss 000000-2234-657HDT50 Beamsplitter 50 0039 Carl Zeiss 000000-2234-657WINKELSCHWALBE Angled optics w.rotable adapt. 0040 Carl Zeiss 000000-2234-657HALO HALO Electronics 0041 Carl Zeiss 000000-2234-657LAMPXEN Spare lamp mod.xenon incl. 2 l 0042 Carl Zeiss 000000-2234-657SETS7STARR Adapt.set rigid S5 Ceil.anchor 0043 Carl Zeiss 000000-2234-657WINK_OHNE Angled w/o side port 0044 Carl Zeiss 000000-2234-657SETS5STARR Adapt.set rigid S5 Ceil.ancho 0045 Carl Zeiss 000000-2234-657VERPBLUE Packaging BlueBox S7 0046 Carl Zeiss 000000-2234-657WINKELSEIT Angled optics with side ports 0047 Carl Zeiss 000000-2234-657FUSS ZOOM FOCUS Foot control panel Zoom Focus 0048 Carl Zeiss 000000-2234-657ADAPTER8400 Adaptation of Canon SLR camera 0049 Carl Zeiss 000000-2234-65710MIT FOC 10x (1x with reticle Focus) 0050 Carl Zeiss 000000-2234-65712,5MIT FOC 12,5x (1x with reticle Focus) 0051 Carl Zeiss 000000-2234-657VORMONT.FLANSCH Pre-installation set 3,0m-3,8m 0052 Carl Zeiss 000000-2234-657VORGR31 Pre-inst. higher 3,1 m 0053 Carl Zeiss 000000-2234-65710MIT 10x (1x with reticle) 0054 Carl Zeiss 000000-2234-65712,5MIT 12.5x 1x format outline reticl 0055 Carl Zeiss 000000-2234-65721 Jig type 21 0056 Carl Zeiss 000000-2234-65710 Boom stand B 0057 Carl Zeiss 000000-2234-65712,5 2x Eyepiece 12.5x 0058 Carl Zeiss 000000-2234-657SETS7HUB Adapt.set lift S5 Ceil.anchor 0059 Carl Zeiss 000000-2234-657DECKENFL Ceiling flange 0060 Carl Zeiss 000000-2234-657WANDSTS7 Wall socket S7 ceiling 0061 Carl Zeiss 000000-2234-657WANDPLATTE S7 Wall plate S7 0062 Carl Zeiss 000000-2234-657VERPZER Packing fragmented 0063 Carl Zeiss 000000-2234-657BLENDE Blende 0064 Carl Zeiss 000000-2234-657STILL INTERFACE Still Interface 0065 Carl Zeiss 000000-2234-657ANBAUS7 Extension kit S7 f. MediLive 0066 Carl Zeiss 000000-2234-657VORKL31 Pre-inst. lower 3,1 m 0067 Carl Zeiss 000000-2234-657IRIS Iris diaphragm for video lense 0068 Carl Zeiss 000000-2234-657MOTION INTERFAC Motion Interface 0069 Carl Zeiss 000000-2234-657BUCHSFUS Connection kit foot control S7 0070 Carl Zeiss 000000-2234-657ASEPSEN Asepsis set Sensera 0071 Carl Zeiss 000000-2234-657VERPDECKEHUB Packaging S7 ceiling power col 0072 Carl Zeiss 000000-2234-657VERPDECKESTARR Packag. S7 ceiling rigid col. 0073 Carl Zeiss 000000-2234-657VERPEWVHF Packag. one-use w/o solid wood 0074 Carl Zeiss 000000-2234-657DRAPE01 Replace Lens Vision Guard 0075 Carl Zeiss 000000-2234-657USBDRIVE USB drive 0076 Carl Zeiss 000000-2234-657SVHS10 S-VHS connecting cable 10m 0077 Carl Zeiss 000000-2234-657VIDSPEZIAL Special video cable for CM 0078 Carl Zeiss 000000-2234-657FUSS Foot control panel 10m 0079 Carl Zeiss 000000-2234-657KEYBOARD Keyboard 0080 Carl Zeiss 000000-2234-657USBSTICK USB memory stick 0081 Carl Zeiss 000000-2234-657DVI DVI Monitor Cable 0082 Carl Zeiss 000000-2234-657DRAPE02 VisionGuard non sterile 0083 Carl Zeiss 000000-2234-657DRAPE88 Mini drape handgrips type 88 0084 Carl Zeiss 000000-2234-657NETZWERKKABEL Ethernet cable 10m, green 0085 Carl Zeiss 000000-2234-657DRAPE70 Drape short type 70 0086 Carl Zeiss 000000-2234-657DVIMONI DVI Monitorcable, 2m 0087 Carl Zeiss 000000-2234-65715M HD-SDI-Videocable 15m 0088 Carl Zeiss 000000-2234-657LAMPHAL 2 halogen spare lamps 0089 Carl Zeiss 000000-2234-65710M HD-SDI-Videocable 10m 0090 Carl Zeiss 000000-2234-6575M HD-SDI-Videocable 5m 0091 Carl Zeiss 000000-2234-657SVHS5 S-VHS connecting cable 5m 0092 Carl Zeiss 000000-2234-657KABELBIND Set of cable binders 0093 Carl Zeiss 000000-2238-13120COTI10 Stereo co-observation 180° 0094 Carl Zeiss 000000-2238-13140UCPSLX UC Superlux 180 for S7 0095 Carl Zeiss 000000-2238-13120UCPSPL Speedfocus Lemo cable 0096 Carl Zeiss 000000-2238-13120UCPSP5 Speedfocus, standard cable 0097 Carl Zeiss 000000-2238-13120COST10 Stereo coobs. str. tube 10x 0098 Carl Zeiss 000000-2238-13110UCPHD 1 Chip HD camera f. PROergo 0099 Carl Zeiss 000000-2238-13120UCPSP Speedfocus for 1Chip HD camera 0100 Carl Zeiss 000000-2238-13120PANELL Panel pre-inst.set,higher 3,3m 0101 Carl Zeiss 000000-2238-13120PANELR Panel f.pre-inst.set, rigid 0102 Carl Zeiss 000000-2238-13120SCOOB Stereo co-observation tube 0103 Carl Zeiss 000000-2238-13120AOSPRA Angled opt. w/ s.p. & rot.adap 0104 Carl Zeiss 000000-2238-13120AOSP Angled optics w/ side port 0105 Carl Zeiss 000000-2238-13120AORA Angl.opt w/o s.p. w/ rot.adap 0106 Carl Zeiss 000000-2238-13110UCPT20 Beamsplitter 20 0107 Carl Zeiss 000000-2238-13120PRER34 Pre-instal. set 3.09 - 3.89m 0108 Carl Zeiss 000000-2238-13120FLEXMO Flexio Motion Adapter 0109 Carl Zeiss 000000-2238-13120FLEXST Flexio Still Adapter 0110 Carl Zeiss 000000-2238-13110UCPT50 Beamsplitter 50 0111 Carl Zeiss 000000-2238-13120PANEL Panel 0112 Carl Zeiss 000000-2238-13120CANONA Adaption Canon SLR 0113 Carl Zeiss 000000-2238-13120ADPT Adapt.set rigid S5 Ceil.anchor 0114 Carl Zeiss 000000-2238-13120ADRIGI Adapt.set rigid S5 Ceil.anchor 0115 Carl Zeiss 000000-2238-13120AO Angled optics w/o side port 0116 Carl Zeiss 000000-2238-13130UCPFCP UC footswitchpin + Footc.panel 0117 Carl Zeiss 000000-2238-13140UCPLX Spare lamp module xenon 0118 Carl Zeiss 000000-2238-13120PREL34 Pre-instal. set 3.1m to 3.9m 0119 Carl Zeiss 000000-2238-13120UCZOFO Foot control panel Zoom Focus 0120 Carl Zeiss 000000-2238-13120ADLIFT Adapt.set lift. S5 Ceil.anchor 0121 Carl Zeiss 000000-2238-13120WALLP Adapterplate for S7 wall mount 0122 Carl Zeiss 000000-2238-13120BRA Binocular Rotator Adapter 0123 Carl Zeiss 000000-2238-13120PRER3 Pre-instal. set lower 3.09m 0124 Carl Zeiss 000000-2238-13120MOTINT Motion Interface 0125 Carl Zeiss 000000-2238-13120UCDIA Double Iris diaphragm 0126 Carl Zeiss 000000-2238-13120STIINT Still Interface 0127 Carl Zeiss 000000-2238-13120UCS7IT Instrument tray S7 floor stand 0128 Carl Zeiss 000000-2238-13120PREL3 Pre-instal. set lower 3.1m 0129 Carl Zeiss 000000-2238-13120UCASST Sterilizable Asepsis Caps 0130 Carl Zeiss 000000-2238-13120UCDP01 VG repl. lens sterile, 20pc 0131 Carl Zeiss 000000-2238-13110UCPSCB Special video cable for CM/WM 0132 Carl Zeiss 000000-2238-13120UCFCP Connect.kit foot contr.panelS7 0133 Carl Zeiss 000000-2238-13120UCDP02 VG repl. lens, n-sterile, 10pc 0134 Carl Zeiss 000000-2238-13110UCPDV System cable DVI-D, 5m 0135 Carl Zeiss 000000-2238-13120ACAP27 6x sterilizable caps 27mm 0136 Carl Zeiss 000000-2238-13120UCDP88 drapes, type 88, pack of 20 0137 Carl Zeiss 000000-2238-13120UCDP70 drapes, type 70, pack of 5 0138 Carl Zeiss 000000-2238-13120UCHAL 2x Halogen lamp 12 V, 100 W 0139 Carl Zeiss 000000-2238-13120ACAP49 6x sterilizable caps 49mm 0140 Carl Zeiss 000000-2238-13120ACAP22 6x sterilizable caps 22mm 0141 Carl Zeiss 000000-2003-213 1yr OPTIME service Respondents should identify a complete solution including associated accessories, as required for full functionality. The following Minimum Technical Requirements (MTRs) are being considered: Magnification range shall include at least 2.5× at the low end and at least 16× at the high end, with motorized magnification and focal adjustments for wide-field or detailed views Coaxial illumination: Light travels along the same line of sight as the lens, reducing shadows and improving clarity in deep, narrow spaces Illumination at working distance > 90,000 lux, High-intensity coaxial light, micro dentistry focused Integrated optics: Apochromatic or high-fidelity lenses for accurate color, sharpness, and depth perception. Ergonomic design: Tiltable handles, adjustable arms, and upright working positions to reduce neck and back strain. Optional imaging: Many models include cameras for live video, photo capture, and patient documentation. For each product identified in the response (brand name and part number), the response must include descriptive literature demonstrating that the product meets or exceeds the MTRs specified above. The Government's intent is to include all ancillary items necessary to ensure the equipment can function as designed by the OEM and as required. Respondents are encouraged to identify any additional accessory, service, or configuration that may be necessary or beneficial to the functionality of the contemplated system. These items must be clearly identified by brand name and part number. Responses to this Sources Sought Notice shall include the following: Full name and address of company. SAM Unique Entity Identifier (UEI). Business Size and socioeconomic status, if applicable (e.g., SDVOSB, VOSB, WOSB, HUBZone, 8(a)). Manufacturer or Distributor: If distributor, provide the full name, business size and address of the manufacturer. If distributor, provide evidence that your firm is currently an authorized distributor for the manufacturer of the products proposed, e.g. an authorized distributor letter with current date certified by the OEM. Country of Origin designation for all products proposed. Describe the firm s ability to provide uninterrupted supply of products on a national scale. Technical literature clearly demonstrating that the proposed product(s) meets the identified minimum technical requirements identifying the page number(s) where each requirement is met. Does respondent offer an annual service plan, Yes or No? If Yes: Describe what the plan covers? Identify whether the plan covers software updates, parts repair/replacement, or both Provide literature or other documentation describing the service plan. Identify whether service is provided by the OEM or a subcontractor. Identify any additional product, accessory, service, or configuration that may be necessary or beneficial to the functionality of the contemplated system. Include the applicable brand name and part number. Item pricing information of products, inclusive of flat rate shipping. Include any quantity discounts, noting at what order quantity the Government should expect tiered price reductions, if any. NOTE: In order for the Contracting Officer to determine whether a set-aside can be pursued, it is essential to provide pricing information. Without this information, the Contracting Officer will be unable to assess whether there is a reasonable expectation of receiving fair and reasonable pricing from socio-economic concerns. Does your firm anticipate any subcontracting opportunities for this requirement? If yes, identify the type and approximate scope of work that could be subcontracted. Identify any federal contract vehicles held by your firm through which your firm can provide this equipment. Are there any further standards or criteria VA should consider in a procurement action for this equipment? Are the Government s specifications unduly restrictive? If yes, identify the specific requirement(s) considered unduly restrictive and provide supporting rationale and recommended alternative language. Any additional information the Government should know prior to issuing a solicitation. Describe any minimum order quantities, geographic limitations, delivery constraints, lead times, or other limitations that could affect the firm's ability to support the requirement on a nationwide basis. | 69% | Market Research | 10/16/2026 |
The Indian Health Service (IHS), Great Plains Area, is conducting market research to identify qualified sources capable of providing high-resolution autoclavable camera heads compatible with the Government's existing Olympus VISERA ELITE II Surgical Imaging System. The Government is particularly interested in determining the availability and capability of: Indian Economic Enterprises (IEEs); Indian Small Business Economic Enterprises (ISBEEs); Small Business concerns, including applicable socioeconomic categories; and Federal Supply Schedule (FSS), Governmentwide Acquisition Contract (GWAC), or other existing Federal contract holders capable of providing the required equipment. The information obtained through this notice will be used for acquisition planning purposes, including determining the appropriate procurement strategy and whether the requirement may be suitable for a set-aside or other competitive acquisition approach. Please review attached sources sought notice. Responses are due October 30, 2026 at 5:00 pm CDT. | 63% | Market Research | 10/30/2026 |
COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS FAR 12.603 Streamlined Procedure Synopsis/Solicitation updates delivery location information for federal healthcare facilities in Oregon. The delivery location for this requirement is Warm Springs Health & Wellness Center, 1270 Kot-Num Road, Warm Springs, OR 97761. Quoters should ensure the capability to provide services and/ or deliver equipment to this location; failure to do so may render the quote non-responsive. All other terms and conditions remain unchanged. This is a combined synopsis/solicitation for commercial items prepared in accordance with FAR Subpart 12.6. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. SOLICITATION INFORMATION Solicitation Number: 75H71326Q00012 Solicitation Type: Request For Quotation Contract Type: Firm Fixed Price Commercial Items: Supply Issue Date: 04/28/2026 Response Deadline: 05/08/2026, 5:00 PM, Eastern Standard Time DESCRIPTION Title: Warm Springs Health & Wellness Center- Optical Coherence Tomography with Table and Angiography Installation, Calibration, and On-Site Training Services. Location: Warm Springs Health & Wellness Center, 1270 Kot-Num Road, Warm Springs, OR 977761 Scope of Work: Procure, deliver, remove existing and disposal, install, and verify operation of a Maestro2 Optical Coherence Tomography with Angiography (OCTA) system with table at Warm Springs Health & Wellness Center. Includes software and upgrades (if Applicable), removal and disposal of existing OCTA equipment, installation, calibration, warranty, documentation, 24/7 support (if applicable), on-site training, optional service contract coverage, and HER/PACS integration. Includes compliance with manufacturer specifications, safety and HIPAA requirements, and all labor, material, and equipment, and transportation necessary for full delivery and installation. Performance Period: Date of award through one year of contract. The performance period includes delivery, removal of existing equipment, installation, testing, and final acceptance. Warranty coverage and support services shall continue for one (1) year from date of final acceptance. Delivery Requirements (if supply): Delivery Date: To be determined (TBD) Delivery Location: Warm Springs Health & Wellness Center, 1270 Kot-Num Road, Warm Springs, OR 97761, F.O.B. Destination. Pricing: Itemized cost (see attached pricing schedule) APPLICABLE PROVISIONS AND CLAUSES The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-02 dated April 01, 2026. 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services. 52.212-2 Evaluation—Commercial Products and Commercial Services. 52.212-4 Terms and Conditions—Commercial Products and Commercial Services. CLAUSES INCORPORATED BY REFERENCE FAR 52.252-2 Full text available at http://www.acquisition.gov 52.202-1 Definitions (Jun 2020) 52.204-7 System for Award Management – Registration (April 2026 Deviation) 52.204-9 Personal Identity Verification of Contractor Personnel (Jan 2011) 52.204-13 System for Award Management – Maintenance (April 2026 Deviations) 52.204-19 Incorporation by Reference of Representation and Certification (December 2014) 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (April 2026 Deviation) 52.219-1 Small Business Program Representation (April 2026 Deviation) 52.222-3 Convict Labor (Jun 2003) 52.222-26 Equal Opportunity (April 2026 Deviation) 52.222-35 Equal Opportunity for Veterans (April 2026 Deviation) 52.222-36 Equal Opportunity for Workers with Disabilities (April 2026 Deviation) 52.224-1 Privacy Act Notification (Apr 1984) 52.224-2 Privacy Act (Apr 1984) 52.226-7 Drug-Free Workplace (May 2024) 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) 52.229-3 Federal, State, and Local Taxes (Feb 2013) 52.229-4 Federal, State, and Local Taxes (State and Local Adjustments) (Feb 2013) 52.232-1 Payments (Apr 1984) 52.232-8 Discounts for Prompt Payment (Feb 2002) 52.232-17 Interest (May 2014) 52.232-33 Payment by Electronic Funds Transfer—System for Award Management (Oct 2018) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) 52.233-1 Disputes (May 2014) 52.233-3 Protest After Award (Aug 1996) 52.237-2 Protection of Government Buildings, Equipment, and Vegetation (Apr 1984) 52.237-3 Continuity of Services (Jan 1991) DEPARTMENT OF HEALTH AND HUMAN SERVICES ACQUISITION REGULATION (HHSAR) (48 CFR CHAPTER 3) CLAUSES: 352.224-70, Privacy Act (Dec 2015) 352.232-71, Electronic Submission of Payment Request (Feb 2022) 352.239-73, Electronic and Information Technology Accessibility Notice (Dec 2015), 352.239-74, Electronic and Information Technology Accessibility (Dec 2015), 352.237-70, Pro-Children Act. (Dec 2015) 352.237-71 Crime Control Act of 1990-Reporting of Child Abuse (Dec 2015) 352.222-70 Contractor Cooperation In Equal Employment Opp. Investigations (Dec 2015) 352.223-70 Safe And Health (Dec 2015) 352.224-71 Confidential Information (Dec 2015) 352.226-1 Indian Preference (Dec 2015) 352.226-2 Indian Preference Program (Dec 2015) SET-ASIDE AND NAICS INFORMATION Set-Aside: Service-Disabled Veteran-Owned Small Business (SDVOSB) NAICS Code: 339112 – Surgical and medical Instrument Manufacturing. Small Business Size Standard: 6,590 employees PCS Code: N065- Installation of Equipment – Medical, Dental, and Veterinary Equipment and Supplies. EVALUATION FACTORS The Government will award a contract to the responsible offeror whose offer, conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Evaluation Factors (listed in descending order of importance): Factor 1: Technical Capability Ability to deliver, remove existing OCTA, install, and verify proper operations of the Optical Coherence Tomography with Angiography (OCTA) system in system according to manufacturer specifications. Factor 3: Price All-inclusive pricing including travel, per diem, lodging, transportation, meals, and taxes. Relative Importance: Non-price factors are less important than price. QUOTATION INSTRUCTIONS Non-Price Section: Organize by evaluation factor Price Section: Submit pricing in accordance with price scheduling, includes delivery, installation, removal of existing equipment, operational verification, travel, and training. Required Submissions: Technical proposal addressing evaluation factors Price quotation FAR 52.212-3 Representations and Certifications Evidence of medical liability insurance (if healthcare services) Past performance references (minimum 3) ATTACHMENTS Attachment 1 – Statement of Work / Specifications Attachment 2 – Schedule of Items Attachment 3 – Wage Determination SUBMISSION REQUIREMENTS Due Date: May 08, 2026 Time: 5:00 PM, Eastern Standard Time Submit to: PORAOAcquisition@ihs.gov Questions: Contact: Tricia Charley Phone: 541-553-2491 Email: tricia.charley@ihs.gov AWARD INFORMATION The Government intends to make multiple awards. No guarantee of work is implied. Purchase orders will be issued on an as-needed basis by location; however, the Government reserves the right to issue a purchase order End of Combined Synopsis/Solicitation | 63% | Combined Synopsis | 05/08/2029 |
Page 2 of 4 THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION. SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT/RFI DESCRIPTION This is NOT a solicitation announcement. This is a Sources Sought Notice / RFI only. The purpose of this Sources Sought Notice / RFI is to gain information about potential qualified sources and their size classification relative to NAICS 339112 (size standard of 1,000 Employees). Responses to this Sources Sought Notice / RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice / RFI, further RFIs and/or a solicitation or other announcements may be published. The Department of Veterans Affairs (VA) is seeking sources capable of providing Avanti Polar Ganglioside GM1-SHP 25MG for the Phoenix Veterans Affairs Health Care System. The list of DRAFT characteristics is intended to be descriptive, not restrictive, of the supplies/services that are required. If your company is interested and capable of providing the required supplies/services, please provide the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Submit your capabilities statement illustrating how your organization can/cannot meet the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements. For instances where your company cannot meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please explain. For instances where your company can meet the DRAFT/SALIENT CHARACTERISTICS/SOW requirement(s), please show how your company meets/exceeds each requirement. (2) Please review the list of DRAFT/SALIENT CHARACTERISTICS/SOW requirements and provide any additional feedback or suggestions. If none, please reply as N/A. (3) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc. (4) Is your company considered small under the NAICS code identified in this RFI? (5) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services described in the list of DRAFT/SALIENT CHARACTERISTICS/SOW? (6) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available). (7) If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified. (8) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6? (9) Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items? (10) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: Provide a product from a small business manufacturer or processor? Not exceed 500 employees? Primarily engage in the retail or wholesale trade and normally sell the type of item being supplied? Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice? (11) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate. (12) What is estimated life span of your solution? What support/services does that entail? (13) Does your proposed equipment have FDA clearance? Please specify what FDA clearance(s) have been obtained. (14) Does your organization offer a leasing solution? Please elaborate. (15) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s). (16) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract. (17) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (18) Please provide your SAM.gov Unique Entity ID/Cage Code number. Buy America Compliance Respondents shall provide sufficient detail to determine compliance with the Buy American Act, including country of origin, domestic content, and availability of domestic alternatives. Responses should be complete and supported with verifiable information. Please identify the country of origin for the end product(s) being offered. Include the location of final assembly/manufacture. Please provide the percentage of domestic content (by cost) for each product(s). Describe the origin of the major components. Does your product qualify as a domestic end product in accordance with the Buy American Act? If the proposed product is not compliant, are you able to provide a BAA-compliant domestic alternative? Please identify the manufacturer name and location for the product(s). Confirm whether the manufacturer is U.S.-based. Identify the country of origin of each product and indicate whether the product qualifies as a U.S.-made or designated-country end product in accordance with the Trade Agreements Act Responses to this notice shall be submitted via email to wilbert.parks@va.gov. Telephone responses will not be accepted. Responses must be received no later than Friday, October 9, 2024 by 4:00 PM EST. All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement. | 61% | Market Research | 10/21/2026 |
THIS REQUEST FOR INFORMATION (RFI) / SOURCES SOUGHT NOTICE IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES. THIS IS NOT A SOLICITATION. SUBMISSION OF INFORMATION ABOUT PRICING, DELIVERY, THE MARKET, AND CAPABILITIES IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI FOR PLANNING PURPOSES IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT/RFI DESCRIPTION This is NOT a solicitation announcement. This is a RFI only. The purpose of this RFI is to gain information about potential qualified sources and their size classification relative to NAICS 339112 (size standard of 1,000 Employees). Responses to this RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this RFI, further RFIs and/or a solicitation or other announcements may be published. The Department of Veterans Affairs (VA) is seeking sources capable of providing Zimmer BioMet Trays. This is a BRAND NAME ONLY action. LIN Description Qty 1 135 STR/ 3MM STEM PROV SZ 10-18 1 2 175 STR/3MM OFF STEM PROV 10-18 1 3 135/175 6MM OFF STEM PROV 10-18 1 4 TIB PREP / TRIAL LEFT TRAY ( MOD TIB ) 1 5 CONE/SLEEVE PREP TRAY 1 6 IMPLANTATION TRAY 1 7 TIB FEM PREP TRAY 1 8 CORE ART SURFACE LEFT TRAY 1 9 FEM AUG CORE UNIVERSAL 1 10 CORE FEM PREP LEFT TRAY 1 11 CORE FEM TRIALS LEFT 1 12 GENERAL INSTRUMENT TRAY 1 13 REAMER TRAY 1 14 CORE ART SURFACE RIGHT TRAY 1 15 CORE FEM PREP RIGHT TRAY 1 16 CORE FEM TRIALS RIGHT 1 17 TIB PREP/TRIAL RIGHT TRAY ( MOD TIB ) 1 18 UNIVERSAL PRIMARY CONVERSION 1 *See Attachment 1 for Bill of Materials for each tray/kit. If your company is interested and capable of providing the required supplies and services, please provide the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran-Owned Small Business (SDVOSB), Veteran-Owned Small Business (VOSB), HUBZone, Woman Owned Small Business (WOSB), Large Business, etc. (2) Is your company considered small under the NAICS code identified in this RFI? (3) Are you the manufacturer, authorized distributor, and/or can your company provide a solution to the required supplies/services? (4) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of contact and size status (if available). (5) If you re a small business and you are an authorized distributor/reseller for the items identified above, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified. (6) Limitations on Subcontracting: How does your business ensure compliance with the limitations on subcontracting as outlined in 13 CFR § 125.6? (7) Are the items you are identifying/providing considered Commercial of the Shelf (COTS) items as defined in FAR Part 2.101 under commercial items? (8) Non-Manufacturer Rule: If applicable, can you confirm your business complies with the Non-Manufacturer rule? Specifically, does your company: Provide a product from a small business manufacturer or processor? Not exceed 500 employees? Primarily engage in the retail or wholesale trade and normally sell the type of item being supplied? Take ownership or possession of the item(s) with its personnel, equipment or facilities in a manner consistent with industry practice? (9) Please indicate whether your product conforms to the requirements of the Buy American Act? (10) What is your lead time to deliver a single unit with all components? Is there scale in lead time with greater quantities? Please elaborate. (11) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number(s). (12) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solutions you are providing information about available on your schedule/contract? Please state if all or some items are available on the contract. (13) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (14) Please provide your SAM.gov Unique Entity ID/Cage Code number. Responses to this notice shall be submitted via email to jasmine.pressley-barnard@va.gov. Telephone responses will not be accepted. Responses must be received no later than Monday, October 19, 2026 by 02:30 PM PT Local. All responses to this Sources Sought/RFI will be used for planning purposes only. Responses to this Sources Sought Notice / RFI are not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation. If further RFIs and/or a solicitation or other announcement is issued as a result of the information provided from this RFI, all interested parties must respond to the specific posting separately IAW the specifications of that announcement. | 61% | Market Research | 10/19/2026 |
Additional Details
Solicitation Number
75H71025Q00317
Archive Date
Sep 1, 2025