GovChime
Notice ID: 8852b067e332433ebdea81afcc0bdeabSolicitationArchived

Medical Storage Cabinets Upgrade

Archived on January 13, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM MST
Posted
January 6, 2026
Notice type
Solicitation
Set-aside
Indian Small Business Economic Enterprise (ISBEE) Set-Aside (specific to Department of Interior and Indian Health Services)
NAICS
339113: Surgical Appliance and Supplies Manufacturing
Agency
Department of Health and Human ServicesINDIAN HEALTH SERVICE

Notice details

Office
NAVAJO AREA INDIAN HEALTH SVC
Place of performance
Tonalea, Arizona, 86044
Last updated
Nov 4, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
75H71026Q00021
Notice ID
8852b067e332433ebdea81afcc0bdeab

Description

The Indian Health Service, Inscription House Health Center (IHHC) located in/at Highway 98 and Navajo Route 16, Tonalea, AZ 86044 has a requirement for new medical cabinets. The period of performance is 02/01/2026 to 06/30/2026.


The Government shall keep the solicitation posted and open for quotes until 01/12/2025 @ 12:00pm MST. To be considered for award, your offer shall include the following documents/information listed in the attached solicitation.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (3)

  • Sol_75H71026Q00021_Amd_0001 (1).pdf

    2.1 MBAdded in Solicitation version 4Posted
    Download
  • IHS IEE Representation Form_Jan 2022_508 Compliant.pdf

    805 KBAdded in Solicitation version 1Posted
    Download
  • Sol_75H71026Q00021.pdf

    770 KBAdded in Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1SolicitationArchived

    Medical Storage Cabinets Upgrade

    Notice 2fc8b87365504cb29eead491820aef51 on SAM.gov

  2. 2
    Version 2SolicitationArchived

    Medical Storage Cabinets Upgrade

    Notice 388d9243ba004d1493ce6512b237804f on SAM.gov

  3. 4
    Version 4SolicitationArchivedCurrent

    Medical Storage Cabinets Upgrade

    Notice 8852b067e332433ebdea81afcc0bdeab on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
PRESOLICITATION NOTICE (SYNOPSIS) The Synopsis The Indian Health Service, Crownpoint Healthcare Facility, located in Crownpoint NM 87313 upcoming requirement for a Smart System Standard all in one visual Acuity System. The North American Industry Classification System or NAICS code is 339115- Ophthalmic Good Manufacturing with a small business size standard of 1,000 employees. The Request for Quotations No. 75H71025Q00161 using the principles of FAR 12 Acquisition of Commercial Items in conjunction with FAR 13 Simplified Acquisition Procedures will be issued on or by April 21, 2025. Evaluation factors may include price. Quotes will be due on or by April 28, 2025. The acquisition is an Indian Owned, Small Business Economic Enterprise (ISBEE). In accordance with 52.204-7(b)(1) prospective contractors must have – and maintain (in accordance with 52.204-13(c) – an active profile in the System for Award Management at beta.SAM.gov in order to submit a quote. For additional information, contact: Name: Arlynda Largo, Purchasing Agent Phone: 505-287-1646 Email: Arlynda.largo@ihs.gov THIS IS NOT A SOLICITATION.
-Pre-Solicitation04/29/2029
Combined Synopsis/Solicitation Notice Combined Synopsis/Solicitation Notice Page 3 of 3 Page 1 of Combined Synopsis/Solicitation Notice *= Required Field Combined Synopsis/Solicitation Notice Page 1 of 3 Page 1 of 1 1. This is a combined synopsis/solicitation for commercial services/items prepared in accordance with the format in FAR Subpart 12.6 in conjunction with FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. 1.A. Project Title: Omnicell Pharmacy 1.B. Project Location: VA Long Beach Healthcare System 5901 East 7th Street, Long Beach, CA 90822 1.C. Solicitation Type - Number: Request for Quotes (RFQ) - 36C26227Q0078. 1.D. Set Aside: This solicitation is Unrestricted Open Market 1.E. Applicable NAICS code: 339113, Surgical Appliances and Supplies Manufacturing 1.F. Small Business Size Standard: 1000 Employees 1.G. Type of Contract: Firm Fixed Price 1.H. Period of Performance: 365 days from award of date 2. Key solicitation milestones are: 2.A. Submit any questions regarding this procurement via email to victor.oliveros@va.gov no later than 12:00 Pacific Local Time, November 11, 2026. No questions will be answered after this date/time unless determined to be in the best interest of the Government as determined by the Contracting Officer. Telephonic questions will not be accepted or returned. RFI responses will be responded to as necessary in amendment format which will be posted to contract opportunities at http://SAM.gov. 2.B. Submit written offers in accordance with the following instructions, as well as Addendum to FAR 52.212-1, Instruction to Offerors. Oral offers will not be accepted. Complete and submit the enclosed SF 1449 via email no later than 15:00 Pacific Local Time, November 17, 2026, to victor.oliveros@va.gov . Ensure the following are completed and/or included in the offer packet: 2.B.1. SF 1449 page 1, 2.B.1.a. Section B.1 - Vendor Information with SAM UEI Number 2.B.1.b. Section B.1 - Acknowledgement of amendments 2.B.1.c. Section B.3 - Schedule of Supplies identifying specific manufacturer and model number being offered 2.B.1.d. Section B.4 - Delivery Schedule 2.B.1.e. Section C.4 - VAAR 852.219-78 VA Notice of Limitations on Subcontracting- Certificate of Compliance of Supplies and Products 2.B.1.f. Section E.5 - FAR 52.212-3 Offeror Representations and Certifications Commercial Items
-Combined Synopsis11/17/2026
Combined Synopsis/Solicitation Notice Combined Synopsis/Solicitation Notice Page 3 of 3 Page 1 of Combined Synopsis/Solicitation Notice *= Required Field Combined Synopsis/Solicitation Notice Page 1 of 3 Page 1 of 1 1. This is a combined synopsis/solicitation for commercial services/items prepared in accordance with the format in FAR Subpart 12.6 in conjunction with FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. 1.A. Project Title: Omnicell Pharmacy 1.B. Project Location: VA Long Beach Healthcare System 5901 East 7th Street, Long Beach, CA 90822 1.C. Solicitation Type - Number: Request for Quotes (RFQ) - 36C26227Q0078. 1.D. Set Aside: This solicitation is Unrestricted Open Market 1.E. Applicable NAICS code: 339113, Surgical Appliances and Supplies Manufacturing 1.F. Small Business Size Standard: 1000 Employees 1.G. Type of Contract: Firm Fixed Price 1.H. Period of Performance: 365 days from award of date 2. Key solicitation milestones are: 2.A. Submit any questions regarding this procurement via email to victor.oliveros@va.gov no later than 12:00 Pacific Local Time, November 11, 2026. No questions will be answered after this date/time unless determined to be in the best interest of the Government as determined by the Contracting Officer. Telephonic questions will not be accepted or returned. RFI responses will be responded to as necessary in amendment format which will be posted to contract opportunities at http://SAM.gov. 2.B. Submit written offers in accordance with the following instructions, as well as Addendum to FAR 52.212-1, Instruction to Offerors. Oral offers will not be accepted. Complete and submit the enclosed SF 1449 via email no later than 15:00 Pacific Local Time, November 17, 2026, to victor.oliveros@va.gov . Ensure the following are completed and/or included in the offer packet: 2.B.1. SF 1449 page 1, 2.B.1.a. Section B.1 - Vendor Information with SAM UEI Number 2.B.1.b. Section B.1 - Acknowledgement of amendments 2.B.1.c. Section B.3 - Schedule of Supplies identifying specific manufacturer and model number being offered 2.B.1.d. Section B.4 - Delivery Schedule 2.B.1.e. Section C.4 - VAAR 852.219-78 VA Notice of Limitations on Subcontracting- Certificate of Compliance of Supplies and Products 2.B.1.f. Section E.5 - FAR 52.212-3 Offeror Representations and Certifications Commercial Items
-Combined Synopsis11/17/2026
Page 2 of 2 Please see below for answers to questions received regarding solicitation 36C26226Q1325. All other terms and conditions remain unchanged. Clarification of the correct proposal/solicitation response due date Responses are due Friday, September 11, 2026. Clarification and reconciliation of the Period of Performance and initial delivery schedule The period of performance will be for one year Due to the complexity and customization of this product, custom surgical packs shall take no more than 24 weeks to produce, sterilize, and deliver for the initial order after commencement of the forthcoming contract. Confirmation of whether any option periods are identified for this requirement There are no option periods for this requirement. Review and reconsideration of the standard delivery timeline, consistent with industry standard of 2 3 days Pack deliveries shall be made two business days after receipt of an order if placed before 1:00 p.m. PST, and within three (3) calendar days for orders placed after 1:00 p.mAre the two and three days the amount of days they have to ship the items, or the items have to be delivered? The comment was correct that requirement as almost impossible for non-local vendors to meet. They must get adequate processing time for each order. GLA will have to be responsible and take process and shipping times into consideration when placing orders. Keeping it this way greatly reduces competition. . Orders shall be delivered no more than three (3) business days. Consideration of a purchasing commitment of at least 60 days in connection with the three-month inventory requirement The contractor must maintain at least three (3) months completely assembled custom packs onpacks on hand at all times, The government will make no purchasing commitments above the minimum dollar threshold identified in the requirements contract. Clarification or reconsideration of the monthly-in-arrears invoicing structure Per government regulations payment is due 30 days after the latter of receiving a proper invoice or government acceptance of the items. Billing monthly ensures a streamlined and consistent process for managing payments .payments. Inclusion of FAR 52.225-1, Buy American Supplies, consistent with the stated Buy American Act evaluation factor See pages 3-6 for inclusion of FAR 52.225-1, Buy American Supplies and FAR 52.225-2, Buy American Certificate. Additionally, Factor 2 of the Evaluation Factors on page 41 of the RFQ now reads: ii. Factor 2 The Offeror shall identify the percentage of items within the proposed custom surgical and non surgical packs that are manufactured in the United States. The Offeror shall also identify the percentage of items manufactured in each foreign country, clearly listing the countries of origin and the proportion of total components sourced from each location. The Offeror must ensure the percentages provided are accurate and reflect the total composition of each pack. In addition, the Offeror shall complete and submit the Buy American Certificate and Made in America Certificate PPE included in this solicitation. Removal or clarification of the Non-Manufacturer Rule Compliance evaluation factor in light of the standing waiver Per VA regulation, a certification is still required for SDVOSB/VOSB set asides. Evaluation factor #3 will remain in the solicitation unchanged. Clarification on Make PPE in America Act applicability to sterile surgical gowns A waiver for all non-domestic items relevant to this acquisition is under review. Buy American-Supplies (Oct 2022) (a) Definitions. As used in this clause Commercially available off-the-shelf (COTS) item (1) Means any item of supply (including construction material) that is (i) A commercial product (as defined in paragraph (1) of the definition of commercial product at Federal Acquisition Regulation (FAR) 2.101); (ii) Sold in substantial quantities in the commercial marketplace; and (iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and (2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products. Component means an article, material, or supply incorporated directly into an end product. Cost of components means (1) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or (2) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the end product. Critical component means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105 . Domestic end product means (1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both- (i) An unmanufactured end product mined or produced in the United States; (ii) An end product manufactured in the United States, if- (A) The cost of its components mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029. Components of foreign origin of the same class or kind as those that the agency determines are not mined, produced, or manufactured in sufficient and reasonably available commercial quantities of a satisfactory quality are treated as domestic. Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic; or (B) The end product is a COTS item; or (2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of foreign iron and steel constitutes less than 5 percent of the cost of all the components used in the end product. The cost of foreign iron and steel includes but is not limited to the cost of foreign iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the end product and a good faith estimate of the cost of all foreign iron or steel components excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the definition of "cost of components". End product means those articles, materials, and supplies to be acquired under the contract for public use. Fastener means a hardware device that mechanically joins or affixes two or more objects together. Examples of fasteners are nuts, bolts, pins, rivets, nails, clips, and screws. Foreign end product means an end product other than a domestic end product. Foreign iron and steel means iron or steel products not produced in the United States. Produced in the United States means that all manufacturing processes of the iron or steel must take place in the United States, from the initial melting stage through the application of coatings, except metallurgical processes involving refinement of steel additives. The origin of the elements of the iron or steel is not relevant to the determination of whether it is domestic or foreign. Predominantly of iron or steel or a combination of both means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners. Steel means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements. United States means the 50 States, the District of Columbia, and outlying areas. (b) 41 U.S.C. chapter 83, Buy American, provides a preference for domestic end products for supplies acquired for use in the United States. In accordance with 41 U.S.C. 1907, the domestic content test of the Buy American statute is waived for an end product that is a COTS item (see 12.505(a)(1)), except that for an end product that consists wholly or predominantly of iron or steel or a combination of both, the domestic content test is applied only to the iron and steel content of the end product, excluding COTS fasteners. (c) Offerors may obtain from the Contracting Officer a list of foreign articles that the Contracting Officer will treat as domestic for this contract. (d) The Contractor shall deliver only domestic end products except to the extent that it specified delivery of foreign end products in the provision of the solicitation entitled "Buy American Certificate." Alternate I (Oct 2022). As prescribed in 25.1101 (a)(1)(ii) substitute the following sentence for the first sentence of paragraph (1)(ii)(A) of the definition of domestic end product in paragraph (a): The cost of its components mined, produced, or manufactured in the United States exceeds 65%  percent of the cost of all its components. (End of clause) 52.225-2 Buy American Certificate As prescribed in 25.1101(a)(2), insert the following provision: Buy American Certificate (Oct 2022) (a) (1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component. (2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select no . (3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105). (4) The terms commercially available off-the-shelf (COTS) item, critical component, "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies." (b)Foreign End Products: Line Item No. Country of Origin Exceeds 65% domestic content (yes/no) ______________ _________________ _________________ ______________ _________________ _________________ ______________ _________________ _________________ (b)[List as necessary] (c) Domestic end products containing a critical component: Line Item No. ___ [List as necessary] (d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation. (End of provision) 852.225-70 MADE IN AMERICA-PPE ([MAY 2026]) (DEVIATION) (a) Definitions. As used in this clause Component, as applied to an item described in subsection (b) of this clause, means an article, material, or supply incorporated directly into PPE. Domestic PPE, as applied to an item described in subsection (b) of this clause, means PPE, including the materials and components thereof, that is grown, reprocessed, reused, or produced in the United States. Foreign-made domestic PPE, as applied to an item described in subsection (b) of this clause, means PPE that is assembled outside the United States containing only materials and components that are grown, reprocessed, reused, or produced in the United States. Foreign PPE means PPE other than domestic PPE or foreign-made domestic PPE. PPE, as applied to an item described in subsection (b) of this clause, means surgical masks, respirator masks and powered air purifying respirators and required filters, face shields and protective eyewear, gloves, disposable and reusable surgical and isolation gowns, head and foot coverings, and other gear or clothing used to protect an individual from the transmission of disease. United States, as applied to an item described in subsection (b) of this clause, means the 50 States, the District of Columbia, and the possessions of the United States. (b) The Contractor must deliver only domestic PPE, unless it specified delivery of foreign-made domestic or foreign PPE in the provision of the solicitation entitled Made in America Certificate PPE". (c) The Buy American Act or Trade Agreement Act will be applicable if neither domestic PPE nor foreign made domestic PPE is available or is of unreasonable cost. (End of clause) 852.225-71 MADE IN AMERICA CERTIFICATE PPE (MAY 2026) (DEVIATION) (a)(1) The Offeror certifies that each item of PPE is either domestic, foreign made domestic, or foreign. (2) The terms domestic PPE, foreign-made domestic PPE, foreign PPE, and PPE, are defined in the clause of this solicitation entitled Made in America PPE . (3) The Offeror understands that the Buy American Act or Trade Agreement Act will be applicable if neither domestic PPE nor foreign made domestic PPE is available or is of unreasonable cost. (b) The Offeror must list all offered PPE in the table and indicate the category of PPE (domestic, foreign-made domestic, or foreign). Line Item No. Country of Origin Domestic PPE, Foreign-made PPE, Foreign PPE ______________ _________________ _________________ ______________ _________________ _________________ ______________ _________________ _________________ (c) In the event the Department of Veterans Affairs determines both domestic personal protective equipment and foreign-made domestic personal protective equipment are not available due to nonavailability or unreasonable cost, the Contractor shall comply with the clauses at Federal Acquisition Regulation (FAR) 52.225-1 Buy American Supplies or 52.225-3 Buy American Free Trade Agreements Israeli Trade Act and the provisions at FAR 52.225-2 Buy American Certificate or 52.225-4 Buy American Free Trade Agreements Israeli Trade Act Certificate or the clause at FAR 52.225-5 Trade Agreements and the provision at FAR 52.225-6 Trade Agreements Certificate, as identified in the solicitation. (End of provision)]
-Combined Synopsis09/11/2026
Description This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format Revolutionary FAR Overhaul (RFO) in Federal Acquisition Regulation (FAR) subpart 12.202, Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01. This solicitation is NOT a set-aside. The associated North American Industrial Classification System (NAICS) code for this procurement is 339113, with a small business size standard of 800 employees. The FSC/PSC is 6515. The Phoenix VA Health Care System 650 E. Indian School Road Phoenix, AZ 85012 is seeking Manoscan AR Catheter REG. All interested companies shall provide quotations for the following: Supplies/Services Product Code Product Name Qty 2192 MANOSCAN AR CATH REG X1 1 MSS-2599 BALLOON ARM 400CC 10-PACK X10 1 Salient Characteristics: - Must incorporate advanced pressure sensing technology - Must feature 256 points of measurement generated by 16 axial × 16 circumferential sensors - Must provide the highest resolution of any available manometry system - Must have 5.6 cm length of continuous circumferential sensing FUNCTIONAL AND PERFORMANCE CHARACTERISTICS: Equipment must provide the functional and performance capability as listed in above section. WARRANTY OF EQUIPMENT: Government requirement for standard manufacturer industry warranty term. The government does not accept an extended warranty, which requires advance payment. Delivery shall be provided no later than 30 days after receipt of order. The full text of FAR provisions or clauses may be accessed electronically at https://www.acquisition.gov/browse/index/far. Submission of your response shall be received not later than Monday, September 011, 2026, at 10:00 am PT Local Time. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f).
-Combined Synopsis09/11/2026

Additional Details

Solicitation Number

75H71026Q00021

Archive Date

Jan 13, 2026

Office Address

WINDOW ROCK, AZ, 86515