Automatic Door Maintenance and Repair Services
Responses closed . Full description on SAM.gov.
Overview
- Response deadline
- 12:00 PM PDT
- Posted
- March 30, 2026
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Service-Disabled Veteran-Owned Small Business Set Aside
- NAICS
- 238290: Other Building Equipment Contractors
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.MISSION INSTALLATION CONTRACTING COMMAND.418TH CSB.W6QM MICC-JB LEWIS-MC CHORD
- Place of performance
- North Lakewood, Washington, 98433
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W911S826RA010
- Notice ID
- 777b58dd18c3420c99f6ce68b9223286
Description
***SOLICITATION AMENDMENT 0002; 30 March 2026***
See attachment titled "Solicitation Amendment - W911S826RA010-0002," Conformed Solicitation - W911S826RA010", and "Consolidated Questions and Answers version 2".
***SOLICITATION AMENDMENT 0001; 13 MARCH 2026***
This amendment is issued to formally extend the proposal submission deadline and announce an additional Question and Answer (Q&A) period. This action is taken to ensure all potential offerors have adequate time to prepare their proposals following a vendor inquiry that required a detailed Government response. To maintain transparency, the full correspondence is included in the "Consolidated Questions and Answers" document.
Revised Documents and Attachments: The following documents are hereby incorporated into the soliciation:
1. Solicitation Amendment - W911S826RA010-0001
2. Conformed Soliciation - W911S826RA010
3. Attachment 1 - Revised PWS Auto Door Services
4. Consolidated Questions and Answers
5. Attachment 7 - Long Term Badge Application
6. Attachment 8 - Technical Experience Form
All other terms and conditions of the solicitation remain unchanged. Offerors are required to acknowledge receipt of this amendment with their proposal submission.
**********************************************************************************************************************************************
This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued.
Solicitation number W911S8-26-R-A010 is issued as a request for proposal (RFP) for full-service automatic door maintenance and repair services. The services will be performed at various facilities across JBLM, including JBLM-Lewis Main, JBLM-Lewis North, and JBLM-McChord Field.
This acquisition is a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.
Scope of Work: The contractor shall provide all necessary personnel, equipment, tools, materials, supervision, and transportation to perform comprehensive maintenance and repair on all types of automatic doors. This includes, but is not limited to, sliding, swinging, and revolving doors located in administrative, training, medical, childcare, recreational, warehouse, billeting, and range facilities.
Core services include:
- Preventive Maintenance: Conduct regularly scheduled inspections, cleaning, lubrication, and adjustments to ensure doors are fully operational and compliant with safety standards.
- Corrective Repairs: Perform troubleshooting and corrective repairs, including the replacement of parts, to restore non-operational doors to service.
- Inspections and Testing: Ensure all automatic doors meet functionality, accessibility, and safety requirements.
- Emergency Service: Respond to service calls for out-of-service doors and perform emergency repairs as needed.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (15)
- Download
Questions and Answers version 2.pdf
218 KBAdded in Combined Synopsis/Solicitation version 3Posted - Download
Solicitation Amendment - W911S826RA010-0002.pdf
3.7 MBAdded in Combined Synopsis/Solicitation version 3Posted - Download
Conformed Solicitation - W911S826RA010.pdf
3.2 MBAdded in Combined Synopsis/Solicitation version 3Posted - Download
Solicitation Amendment - W911S826RA010-0001.pdf
3.9 MBAdded in Combined Synopsis/Solicitation version 2Posted - Download
Attachment 8 - Technical Experience Form.docx
23 KBAdded in Combined Synopsis/Solicitation version 2Posted - Download
Consolidated Questions and Answers.pdf
168 KBAdded in Combined Synopsis/Solicitation version 2Posted - Download
Attachment 7 - Long Term Badge Application.pdf
311 KBAdded in Combined Synopsis/Solicitation version 2Posted - Download
Attachment 1 - Revised 1 PWS Auto Door Services.pdf
417 KBAdded in Combined Synopsis/Solicitation version 2Posted - Download
WD 2015-5539 (Revision No. 30).pdf
4.7 MBAdded in Combined Synopsis/Solicitation version 1Posted - Download
Solicitation - W911S826RA010 Professional Appearance.pdf
3.3 MBAdded in Combined Synopsis/Solicitation version 1Posted - Download
Attachment 6 - Door Inventory.pdf
226 KBAdded in Combined Synopsis/Solicitation version 1Posted - Download
Attachment 5 - Estimated Workload Data.pdf
173 KBAdded in Combined Synopsis/Solicitation version 1Posted - Download
Attachment 2 - Lewis Main Map.pdf
11 MBAdded in Combined Synopsis/Solicitation version 1Posted - Download
Attachment 3 - Lewis North Map.pdf
7.5 MBAdded in Combined Synopsis/Solicitation version 1Posted - Download
Attachment 4 - McChord Field Map.pdf
7.1 MBAdded in Combined Synopsis/Solicitation version 1Posted
Lifecycle
- 1Version 1Combined Synopsis/Solicitation
Automatic Door Maintenance and Repair Services
- 2Version 2Combined Synopsis/Solicitation
Automatic Door Maintenance and Repair Services
- 3Version 3Combined Synopsis/SolicitationCurrent
Automatic Door Maintenance and Repair Services
- 6Version 6Award NoticeArchived
Type changed from Combined Synopsis/Solicitation to Award Notice
Automatic Door Maintenance and Repair Services
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
| - | Awarded | Open | |
Generator Replacement for Quillayute Airport (UIL) This is a commercial construction requirement set aside 100% for Small Businesses utilizing LPTA procedures. Subject to DBA Wage Determination Please see all attachments related to this RFQ. Instructions can be found in Section 6 of the RFQ with corresponding Evaluation criteria found in Section 7. If submission does not meet the exact instruction requirements, the quoter will be found non-responsive. | - | Combined Synopsis | 11/17/2026 |
THE SOLICITATION IS AMENDED TO EXTEND THE CLOSING DATE TO 06 NOVEMBER 2026 BY 2:00 PM PT. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation; offers are being requested, and a separate written solicitation will not be issued. Offeror shall provide inspection, scheduled maintenance, and system repair to the backup diesel generator system for Johnston Ridge Observatory (JRO) located in Toutle, WA. The backup diesel generator is a “Simpower Generator Systems” 1000KW, 1250KVA system that has a Mitsubishi engine and a MagnaMax Synchronous AC Generator. Unit Model: SP1000D3PS12N-PTA2 Serial Number: 8855 Mitsubishi Model: S12N-PTA2 Serial Number: 20919 MagnaMax Synchronous AC Generator Model: 741RSL20648B Serial Number: XL 3835609 3 Phase 60Hz Continuous 975KW, 277/480V, 1219kVA, 1466Amp JRO address for this work is: 21000 Spirit Lake Highway, Toutle, WA 98649. Solicitation number 1240BD27Q0009 is issued as a Request for Quotation (RFQ). The applicable North American Industry Classification Standard Code is 238290 Other Building Equipment Contractors. The small business size standard 22 Million. The Service code is J061Maint/repair/rebuild of equipment- electric wire and power distribution equipment. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency. The contract will be a Firm-Fixed Price contract. Address contracting questions to Jorge Somoza at 509-423-2224 or email jorge.somoza@usda.gov Address technical questions about this solicitation to Heath Cameron at (360) 449-7813 or email heath.cameron@usda.gov Sent your quote by email to jorge.somoza@usda.gov only. do not send your quote to anyone else. Submit your quote no later than 03 November 2026 before 2:00 PM PST. Any quote received after 2:00 PM on that day is late and it won’t be accepted it. | - | Combined Synopsis | 11/06/2026 |
Naval Undersea Warfare Center (NUWC) Division, Keyport is soliciting to insulate and lag an outdoor run of copper piping at NUWC Keyport as described in the Statement of Work. This requirement is being issued as a combined synopsis/solicitation for commercial items in accordance with FAR 12.1, as supplemented with additional information included in the attached solicitation. This announcement constitutes the only solicitation. There is no applicable Defense Priorities and Allocations System (DPAS) rating for this requirement. The solicitation, issued as request for quotation (RFQ) N0025327Q0003, is attached to this announcement. The proposed contract is 100% set aside for small business concerns. The applicable North American Industry Classification System (NAICS) code for this requirement is 238290 and has a size standard of $22M in annual revenue. Offerors are required to provide FOB Destination pricing to NUWC Division, Keyport. Requirements and evaluation procedures are listed in the attached solicitation, which is required to be filled out in its entirety and returned before the solicitation closes. All questions regarding this solicitation should be submitted in writing as soon as practicable after receipt of solicitation. Questions and offers should be submitted via e-mail to michelle.a.farrales.civ@us.navy.mil & kaci.j.campbell.civ@us.navy.mil. No paper copies will be accepted. Only digital copies sent via email will be accepted. Failure to complete all representations and certifications found within the solicitation and respond to this RFQ with associated amendments, if applicable, prior to the closing date and time established may render an offer non-responsive and result in rejection. Company quote forms will NOT be accepted. All details regarding the vendor offer shall be documented in the RFQ. The government terms and conditions (T&C’s) listed in this solicitation are required by law through the Federal Acquisition Regulations (FAR) and the Department of Defense FAR Supplement (DFAR). It is preferred that company T&C’s not be included with your quote submittal as many company T&C’s are inconsistent with federal law and unenforceable. Provisions and clauses in effect through the latest Federal Acquisition Circulars are included in the solicitation. To access the clauses/provisions to be completed, download the Federal Acquisition Regulations at http://acquisition.gov/far/. Download the Defense Federal Acquisition Regulations (DFARS) at http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html. The offeror must have a current registration and completed representations and certifications in the System for Award Management (SAM) at website https://sam.gov/ which is a federal government owned website. | - | Solicitation | 11/03/2026 |
Title: LLA Navigation Lock Switchgear Replacement: The work is located at the Lower Granite Dam, Pomeroy, Washington. The solicitation will be issued as a Best Value Trade-Off (BVTO) Request for Proposal (RFP) and result in a single firm-fixed price construction contract. This procurement is a small business set aside. 100% Performance and payment bonds will be required for this project. The North American Industry Classification System (NAICS code for this project is 238210 Electrical Contractors and Other Wiring Installation Contractors and the associated small business size standard is $19 million. Solicitation number W912EF27RA002 will be posted to the SAM.gov Contract Opportunities website on or about mid November 2026. The proposal due date will be contained in the solicitation and any solicitation amendments that may be issued. The solicitation will be made available for download on the SAM.gov Contract Opportunities website. Offerors are responsible for checking the referenced page for any updates to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offeror's inability to access the documents posted at the referenced website. Proposals will be due approximately 30 days after the solicitation is posted. The exact proposal due date will be indicated in the solicitation. System for Award Management (SAM): Offerors must register in the SAM at https://sam.gov/content/home prior to receiving an award. NOTE: The response date that is required to post this notice is not in any way a due date for any submission. This is a pre-solicitation notice only. Scope: The scope of the work involves replacing existing medium and low voltage switchgear lineups and their associated feeder cables with modernized medium and low voltage switchgear and motor control center lineups at Lower Granite Dam Navigation Lock. The main features of work includes: Provide and install one (1) new medium voltage switch gear. Provide and install one (1) new low voltage switch gear. Provide and install two (2) new motor control center lineups. Provide modernized controls for existing electrical loads. Provide one (1) new 4,160/480-V 1,000 kVA transformer. Provide lighting load centers to replace existing panels. Provide new concrete housekeeping pads for new electrical equipment. Provide new cable trays and conduits where required by circuit reconfigurations and to bring fill ratios to levels that meet electrical codes. Provide an HMI screen to replace an existing annunciator panel. Demolish existing medium and low voltage switchgear, motor controls centers, and transformers. Demolish the existing 480VAC feeders routed from existing low voltage switchgear and motor control centers. Seal hatch and any expansion joints, or cracks, to prevent water intrusion in an existing electrical room. This work is anticipated to be performed in 2028 and 2029, with cutover power construction work being completed during the 2028 and 2029 navigation lock outages. Access to the navigation lock deck and electrical substation rooms will be available for workers and equipment. THE GOVERNMENT RESERVES THE RIGHT TO CANCEL THE SOLICITATION EITHER BEFORE OR AFTER THE CLOSING DATE. NO REIMBURSEMENT WILL BE MADE FOR ANY COSTS ASSOCIATED WITH PROVIDING INFORMATION IN RESPONSE TO THIS PRE-SOLICITATION NOTICE OR ANY FOLLOW-UP INFORMATION REQUEST. All on-site work shall be performed in accordance with the Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1). Establish and manage an effective on-site Safety and Health program in accordance with EM 385-1-1 that will require the development and submission of a comprehensive project specific Accident Prevention Plan for Government acceptance. In addition, develop and submit for Government acceptance Activity Hazard Analyses for each phase of work and a project specific Fall Protection Plan that comply with EM 385-1-1. A Site Safety and Health Officer (SSHO) employed by the prime contractor is required for each shift of the contractor's on-site operations. The SSHO shall possess a minimum of 5-years’ experience in construction safety on similar projects, shall have completed the 30-Hour OSHA Construction Safety training within the last 5 years, and shall have completed at least 24 hours of safety training from accredited safety training sources each year for the past 5 years. Establish and manage an effective Contractor Quality Control (CQC) System that will require the development and submission of a comprehensive project specific CQC Plan for Government acceptance. A CQC System Manager employed by the prime contractor is required to be on-site for each shift of the Contractor's operations. The CQC System Manager must possess a minimum of 5 years relevant experience in a supervisory or management position such as Quality Control Manager, Quality Assurance Manager, or Construction Manager directly involved in the management of construction quality at the project site. In addition, the CQC System Manager shall have completed the course entitled “Construction Quality Management for Contractors” within the last 5 years. Use the Government-furnished Resident Management System (RMS) – Contractor Mode to record, maintain, and submit various information throughout the contract period. RMS is a Windows-based program capable of operating on a stand-alone personal computer or on a network. The Government will make the quality control system (QCS) software available to the Contractor at time of notice to proceed. The project involves the development and management of Contractor furnished submittals for items such as pre-construction plans, product data, test reports, and contract close-out documentation as required by the technical specifications of the contract. Miscellaneous work within the project includes the delivery of As-Built Drawings, O&M Manuals, Contractor- Prepared Shop Drawings, and spare parts to the customer. Solicitation Number W912EF27RA002 will be posted to the SAM.gov approximately on around mid to late November 2026. The solicitation is a Request for Proposal Important Note: The SAM.gov Contract Opportunities Response Date listed elsewhere in this synopsis is for SAM.gov archive purposes only. It does not necessarily reflect the actual proposal due date. There is no response date included in this notice. The proposal due date and time will be contained in the solicitation and any solicitation amendments that are issued. Anticipated Award date is early to mid-March 2027. A site visit will be offered approximately 2 weeks after the solicitation is made available to offerors. See solicitation for details about the site visit. ACCESS FOR FOREIGN NATIONALS: Security clearance for foreign nationals to attend a site visit requires approximately 4 weeks; therefore, clearance should be requested immediately. To request clearance, please submit the names of all foreign nationals proposed for site visit attendance, along with documentation to verify that he/she was legally admitted into the United States and has authority to work and/or go to school in the US. Such documentation may include a US passport, Certificate of US citizenship (INS Form N-560 or N-561), Certificate of Naturalization (INS Form N-550 or N-570), foreign passport with 1-551 stamp or attached INS Form 1-94 indicating employment authorization, Alien Registration Receipt Card with photograph (INS Form 1-151 or 1-551), Temporary Resident Card (INS Form 1-688}, Employment Authorization Card (INS Form l-688A}, Reentry Permit (INS Form 1-327}, Refugee Travel Document (INS Form 1-571}, Employment Authorization Document issued by the INS which contains a photograph (INS Form I-688B}. Send this information by email to leanne.r.walling@usace.army.mil and jani.c.long@usace.army.mil Foreign nationals must have received clearance prior to being granted access to the project site. | - | Pre-Solicitation | 11/13/2026 |
Additional Details
Solicitation Number
W911S826RA010
Archive Date
Mar 31, 2028
Office Address
JOINT BASE LEWIS MCCH, WA, 98433-9500