Notice ID: 7c77f463fe1a465ba5f056ed178c1c5eCombined Synopsis/Solicitation
CRACK SEALER TRAILER
Responses closed . Full description on SAM.gov.
Overview
- Response deadline
- 2:00 PM EDT
- Posted
- August 19, 2026
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 336999: All Other Transportation Equipment Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.MISSION INSTALLATION CONTRACTING COMMAND.419TH CSB.W6QM MICC-FT DRUM
- Place of performance
- 4525 Camp Hale RD Fort Drum, NY 13602, 13602
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W911S226U4157
- Notice ID
- 7c77f463fe1a465ba5f056ed178c1c5e
Description
Unit shall have a minimum of a 20 hp liquid cooled diesel engine, Engine shall have an emergency shutdown package so it will shut down if oil pressure becomes too low or engine temps become too high, Unit shall have a digital display to control the machine and view gauges, Unit shall have a minimum of a 25 gallon fuel tank, Unit shall have a minimum of a 25 gallon hydraulic tank, Unit shall have a bi-directional, variable speed pump that is directly driven by the engine, Unit shall have a 260 gallon capacity (minimum), Controls shall be mounted at the rear of the trailer for ease of operator use., All valves shall be controlled by a solenoid operated by a toggle switch or wand controls, Required minimum melt rate of 2000 pounds per hour, Strobe light, Fire extinguisher with mounting bracket, Frame mounted tool box, The unit shall have a safety shut off on the loading door that stops the agitator automatically when the door is open, Applicator wand shall be equipped with an automatic shut off feature that will stop the rotation of the pump, sealant flow, and all line pressure when the handle is released or dropped, Temperature indicating devices shall have intervals of no more than 1 degree, Spare tire with frame mounted holder, 2 5/16 inch trailer ball hitch mount, Tongue height shall be adjustable from ground level to a minimum of 14 inches and maximum of 32 inches permitting adjustment for use on different vehicles, 7 pin RV style trailer light hook up, All led trailer lighting, Safety chains, Tongue jack rated for 5000lbs (minimum), 2 copies of all parts, operators and service manuals, Onsite operators training, Item unique identification label is required, 180 days delivery after receipt of order (ARO), Delivered to Fort Drum NY
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Links (4)
- PIEE Solicitation Module Link for W911S226U4157piee.eb.milPosted
- Web Based Training for the PIEE Solicitation Modulepieetraining.eb.milPosted
- Registration Instructions for the PIEE Solicitation Modulewww.acq.osd.milPosted
- Department of Defense Procurement Toolboxdodprocurementtoolbox.comPosted
Lifecycle
- 1Version 1Combined Synopsis/SolicitationCurrent
CRACK SEALER TRAILER
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
amended to add set aside code. The plow shall be a pusher plow with a 30-foot blade and with the top of the inside barrel being 56 inches from the ground. The plow shall have an integrated weld-in JRB 420 coupler, with each inner face measuring 29 3/8 inches from each other, and evenly spaced from the center. The end plates shall be made from 3/8-inch plate and shall be a maximum of 61 11/16 inches tall and maximum width of 41 3/8 inches. There shall be (3) square 11/16-inch holes with the centers positioned 3 inches, 19 inches, and 35 inches away from the front side of the plate, and 2 inches from the bottom of the plate. Each end plate shall have a 2 1/2-inch section at the end of each plate which will be bent away from the plow weldment. Each end plate shall have a 1 1/2-inch hole positioned at the top of the plate. There shall be (7) 9/16-inch holes on each end plate along the profile of the final rib to attach the end plate to the plow weldment. The end plate shall attach to the plow weldment with (7) 1/2-13 x 2-inch Grade 8 hex bolts and (7) 1/2-13 Grade 8 locknuts. On each end plate shall be welded (2) identical support gussets made from 3/8-inch plate measuring 2 1/2 inches x 32 inches. On each end plate will be a shoe weldment with a mounting plate constructed from 1/2-inch steel, a base plate made from 3/4-inch steel, and (2) 1/2-inch x 4-inch x 4-inch gussets each positioned 11 1/2 inches from the center. The shoe shall be 6 3/4 inches tall, measure 39 11/16 inches in length, and be 6 inches in depth. There shall be (3) mounting slots positioned at the center and 16 inches from the center measuring 11/16 inches in width and measuring 2 3/8 inches in length. The mounting shoe shall be secured to each end plate with (3) sets of a 5/8-11 Grade 8 bolt, a 5/8 Grade 8 washer, and a 5/8-11-inch Grade 8 locknut. The plow skin shall have (7) press-broken brakes to form the plow, with (2) additional brakes at the top to form the box brake. The plow skin shall be a total of 360 1/2 inches wide, formed from (3) 8GA segments measuring 90 quarter-inches (or 90 1/4 inches) in length, and having an original height of 84 1/2 inches. There shall be (14) drain holes on the brake between the plow skin and the box brake, burnt at 9/16 of an inch. There shall be (38) slots in the bottom of the plow skin to facilitate the attachment of the blade. There shall be (2) 1 1/2-inch x 10-inch x 180-inch rubber blades attached to the plow skin. The blade will be secured via (6) 3/8-inch x 3-inch x 57-inch retainer plates and (34) 5/8-11 x 4-inch Grade 8 bolts with 5/8-11 Grade 8 locknuts. There shall be (15) ribs placed vertically on the plow skin for support made with 1/2-inch plate. On the outermost ribs shall be (7) mounting holes for the end plates. The innermost (2) ribs shall be shorter in length and weld to the couplers. The 2nd outermost set of ribs shall have a 2 1/2-inch diameter hole positioned at the top. There shall be one rib positioned between the couplers with a 2 1/2-inch hole at the top for lifting. Between each rib on the rear of the plow shall be a section of 5-inch x 5-inch x 1/2-inch angle placed between the 3rd and 4th brakes from the bottom of the skin. (12) shall be 24 inches in length, with the angles (2) in the center being 14 5/16 inches in length. Below the first brake shall be (4) identical pieces of bent reinforcement placed end to end measuring 3/8-inch x 18-inch x 89 13/16-inches, which shall cover the entire length of the plow. Below all ribs excluding the outer 4 and the center shall be lower ribs whose profile shall encircle the bent channel and terminate in a flat section perpendicular to the ground. These lower ribs will have additional supports on the bottom, and between the ribs/couplers and the couplers themselves. The supports and lower ribs will all be welded to (2) 124 11/32-inch x 19 3/4-inch reinforcement plates, one on either side, with 1 3/8-inch x 12 29/32-inch slots spaced 14 19/32 inches from the center to accommodate the weld-in couplers. All of these supports will be made from 3/8 plate. Connecting the outermost lower ribs and the end plate will be (4) outer lower reinforcements, (2) per side. The lower of these supports on either side shall be supported via a 1/2-inch x 6-inch x 8 1/2-inch plate welded to the skin, lower reinforcement, and blade angle. At each corner of the plow shall be a triangular gusset for reinforcement, made from 3/8-inch plate at the bottom of the plow and 8GA at the top. Between the couplers shall be (2) 1/2-inch x 6-inch x 6-inch gussets. The blade angle shall be a 6-inch x 4-inch x 3/4-inch x 360-inch angle with 38 holes spaced along its length. It will also have (27) 1/2-inch x 2 1/4-inch x 4-inch gussets spaced between the holes. | 74% | Combined Synopsis | 09/03/2026 |
One hundred five net horsepower four cylinder in line diesel tier four engine minimum, integrated airflow system to provide cross flow cooling for all condensers, engine radiator and hydraulic coolers, sixty mesh stainless steel screen for incoming outside air, operating weight thirty-two thousand eight hundred pounds minimum, additional rear counterweight two thousand two hundred pounds minimum, compact radius design with a maximum of five feet tail swing, ROPS or FOPS protected operators cab, deluxe high back air ride heated seat with seatbelt, cup holder, AM or FM radio with Bluetooth, rear and side view camera system two hundred seventy degree view, interior and exterior mirrors, front sun visor, windshield washer and wiper, in cab emergency window breaker or seatbelt cutter tool, heavy duty HVAC system to include automatic climate control, automatic two speed travel mode, heavy duty fifteen feet four inches boom and heavy duty nine feet four inches arm minimum, minimum twenty-eight foot overall reach, minimum nineteen foot dig depth, long under carriage, twenty-three point six inch minimum track width with triple grouser shoes and bolt on rubber pads, forty-nine gallon fuel tank minimum, five point five gallons def tank minimum, engine block heater one hundred twenty volt ac, automatic engine warm up system, cold weather package, radiator screen, lockable battery power disconnect switch, hydraulic control to switch patterns from iso to backhoe modes, travel motion and backup alarm, toolbox, swing flasher indicator safety lights integral (built in) at rear of machine for safety, twenty-four volt electrical system, twenty-four volt dc converter to twelve volt, military slave connection for battery charging and boosting, two-way auxiliary hydraulics hand controlled, second auxiliary hydraulic circuit with rotation hand controlled, case drain, include all valves, fittings, hoses and controls for the mentioned attachments plus a hydraulic hammer, mulching head and mower for future operation, through main pin heavy duty hydraulic thumb, hydraulic attachment pin grabber quick coupler, eighteen inch heavy duty dirt digging bucket with replaceable teeth and side cutters and a lifting eye, thirty inch ditching bucket with smooth bolt on cutting edge with lifting eye, thirty-six inch heavy duty dirt digging bucket with replaceable teeth and side cutters and a lifting eye, sixty inch hydraulically tilting ditching bucket with bolt on cutting edge, one set of bucket pins for each bucket, ground level service, must have front windshield and top window forestry guards that are easily removeable, one hundred two inch dozer blade with independent hydraulic pump, belly pan guard, LED beacon light, LED lights: two on the boom, one on right front of the body, two front and two rear of cab, unique identification (IUID) plate mounted, two copies of all operators, service and parts manuals, warranty: four year or four thousand hour full machine, travel time and mileage to be included, delivered to Fort Drum, New York. | 74% | Combined Synopsis | 08/26/2026 |
The plow shall be a pusher plow with a 15-foot blade and with the top of the inside barrel being 56 inches from the ground. The plow shall have an integrated weld-in JRB 416 coupler, with each inner face measuring 29 3/8 inches from each other and evenly spaced from the center. The end plates shall be made from 3/8-inch plate and shall be a maximum of 61 11/16 inches tall and maximum width of 41 3/8 inches. There shall be (3) square 11/16-inch holes with the centers positioned 3 inches, 19 inches, and 35 inches away from the front side of the plate, and 2 inches from the bottom of the plate. Each end plate shall have a 2 1/2-inch section at the end of each plate which will be bent away from the plow weldment. Each end plate shall have a 1 1/2-inch hole positioned at the top of the plate. There shall be (7) 9/16-inch holes on each end plate along the profile of the outermost ribs to attach the end plate to the plow weldment. Each end plate shall attach to the plow weldment with (7) 1/2-13 x 2-inch Grade 8 hex bolts and (7) 1/2-13 Grade 8 locknuts. On each end plate shall be welded (2) identical support gussets made from 3/8-inch plate measuring 2 1/2 inches x 32 inches. On each end plate will be a shoe weldment with a mounting plate constructed from 1/2-inch steel, a base plate made from 3/4-inch steel, and (2) 1/2-inch x 4-inch x 4-inch gussets each positioned 11 1/2 inches from the center. The shoe shall be 6 3/4 inches tall, measure 39 11/16 inches in length, and be 6 inches in depth. There shall be (3) mounting slots positioned at the center and 16 inches from the center measuring 11/16 inches in width and measuring 2 3/8 inches in length. The mounting shoe shall be secured to each end plate with (3) sets of a 5/8-11 Grade 8 bolt, a 5/8 Grade 8 washer, and a 5/8-11-inch Grade 8 locknut. The plow skin shall have (7) press-broken brakes to form the plow, with (2) additional brakes at the top to form the box brake. The plow skin shall be a total of 180 1/2 inches wide, formed from (2) 8GA mirrored halves measuring 90 1/4 inches in length, and having an original height of 84 1/2 inches. There shall be (8) drain holes on the brake between the plow skin and the box brake, burnt at 9/16 of an inch. There shall be (17) slots in the bottom of the plow skin to facilitate the attachment of the blade. There shall be a 1 1/2-inch x 10-inch x 180-inch rubber blade attached to the plow skin. The blade will be secured via (3) 3/8-inch x 3-inch x 57-inch retainer plates and (17) 5/8-11 x 4-inch Grade 8 bolts with 5/8-11 Grade 8 locknuts. There shall be (8) ribs placed vertically on the plow skin for support made with 1/2-inch plate. On the outermost ribs shall be (7) mounting holes for the end plates. The innermost (2) ribs shall be shorter in length and weld to the couplers. Between each rib on the rear of the plow shall be a section of 5-inch x 5-inch x 1/2-inch angle placed between the 3rd and 4th brakes from the bottom of the skin. (6) shall be 24 inches in length, with the angle in the center being 29 1/4 inches in length. Below the first brake shall be (2) identical pieces of bent reinforcement measuring 3/8-inch x 18-inch x 89 11/16-inches. Below the middle 4 ribs shall be lower ribs whose profile shall encircle the bent channel and terminate in a flat section perpendicular to the ground. These lower ribs will have additional supports on the bottom, and between the ribs/couplers and the couplers themselves. The supports and lower ribs will all be welded to an 80 1/8-inch x 19 7/8-inch reinforcement plate with 1 5/16-inch x 9 1/16-inch slots spaced 24 3/32 inches from each edge to accommodate the weld-in couplers. All of these supports will be made from 3/8 plate. Connecting the outermost lower ribs and the end plate will be (4) outer lower reinforcements, (2) per side. The lower of these supports on either side shall be supported via a 1/2-inch x 6-inch x 8 1/2-inch plate welded to the skin, lower reinforcement, and blade angle. At each corner of the plow shall be a triangular gusset for reinforcement, (4) total, made from 3/8-inch plate at the bottom of the plow and 8GA at the top. Between the couplers shall be (2) 1/2-inch x 6-inch x 6-inch gussets, and (1) lifting lug. The blade angle shall be a 6-inch x 4-inch x 3/4-inch x 180-inch angle with 17 holes spaced along its length. It will also have (14) 1/2-inch x 2 1/4-inch x 4-inch gussets spaced between the holes. | 74% | Combined Synopsis | 08/26/2026 |
Reason for amendment 0002 is to update characteristics from horizontal coil to vertical coil.Amended to change PSC code Hot Water Pressure Washer | 52% | Combined Synopsis | 09/01/2026 |
Amendment 0001: Covered cargo area, 15 inch wheel diameter, 30 inch tire diameter. No other changes to original solicitation | 48% | Combined Synopsis | 11/05/2026 |
Additional Details
Solicitation Number
W911S226U4157
Archive Date
Aug 19, 2027
Office Address
FORT DRUM, NY, 13602-5220