GovChime
Notice ID: 4152df5c77274d499b7aae90ad8a75a9Presolicitation

Laser Interferometer Space Antenna (LISA) Charge Management Device (CMD) Engineering Development

Archived on June 4, 2020. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
3:30 PM UTC−04:00
Posted
May 5, 2020
Notice type
Presolicitation
NAICS
336414: Guided Missile and Space Vehicle Manufacturing
Agency
National Aeronautics and Space Administration

Notice details

Office
NASA GODDARD SPACE FLIGHT CENTER
Last updated
Dec 4, 2025

Identifiers

Solicitation number
80GSFC20R0041
Notice ID
4152df5c77274d499b7aae90ad8a75a9

Description

The National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC) intends to negotiate solely with the University of Florida, 1523 Union Rd. Room 207, Gainesville, FL, 32611-1941, in accordance with 10 U.S.C. 2304(c)(1), as implemented by Federal Acquisition Regulation (FAR) 6.302-1, Only one responsible source and no other supplies or services will satisfy agency requirements to procure a charge management device as a part of an international spacecraft program. The Laser Interferometer Space Antenna (LISA) is a state-of-the-art space based gravitational wave telescope to address key questions in astrophysics. LISA was selected by the European Space Agency (ESA) as the third large mission of the Cosmic Vision Program during June of 2017. NASA is an international partner in this effort and has teamed with ESA, its international partners and other support contractors. The LISA mission consists of several critical components, one of which is Charge Management Device (CMD) which is a part of the Gravitational Reference Sensor (GRS). The GRS is an evacuated chamber that houses the LISA test mass and sensors to determine the location of the test mass and maintain it in a drag-free environment. The test mass housed within the GRS acts as the reference for the local inertial frame. It is the end mirror for the laser interferometers. This test mass builds charge due to caging release, cosmic rays, Solar Energetic Particles (SEPs). In order to control external forces on this test mass, its charge must be controlled. The purpose of the charge management device is non-contact charge removal from the test mass. As a part of its contribution to the LISA mission, NASA will support the design, development and testing of the CMD. NASA is subject to an aggressive schedule, established by ESA, and intends to utilize Ultra-Violet (UV) illumination technology that has been proven in flight on the previous LISA Pathfinder mission to meet the LISA charge management needs with any modifications necessary to meet the resource and lifetime requirements for LISA. NASA will accomplish the design, manufacture and delivery of TRL-6 breadboard CMD by the end of 2022 in preparation for the ESA Adoption review in 2023. Additionally, an engineering development unit (EDU) and an engineering test unit (ETU) CMD will be developed and delivered with the EDU required by December 2023 in preparation for the CMD preliminary design review and the ETU required by July 2025 in preparation for the CMD critical design review. The CMD development effort includes performing all required analysis, design, fabrication and testing of a TRL-6 breadboard EDU and ETU CMD in the relevant space environment, including testing and integration activities. CMD design reviews with the LISA team will occur before manufacturing hardware and in preparation for environmental testing. The procurement will require the delivery of the completed prototype units for integration into the University of Trento GRS test setup for end-to-end testing and post test data analyses. In addition to support to the above development, the contractor should also be prepared to support the ESAs Adoption Review for the LISA mission and regular monthly project reviews and meetings. The interested organizations should be willing and able to support the schedule of development of the TRL-6 CMD by the end of calendar year 2022. This is a critical subsystem for the LISA mission and any delay in the development of this item places the success of the ESA Adoption review in 2023 in jeopardy. GSFC intends to issue a sole source Request for Proposal to the University of Florida for the design, development and manufacture of the CMD in preparation for the LISA Adoption review and the CMD Preliminary Design Review (PDR) and Critical Design Review (CDR). This hardware will be delivered to ESA and integrated into the GRS test environment for verification of performance in the relevant environment of the instrument by the end of 2022 for the TRL-6 breadboard, by December 2023 for the EDU and July of 2025 for the ETU. A DRAFT LISA CMD Statement of Work, which details the requirements, is attached to this notice. The North American Industry Classification System (NAICS) for this requirement is 336414 and the size standard is 1,250 employees. This announcement constitutes the notice required by FAR 5.201. All questions and responses concerning this notice shall be emailed to Meredith Link at meredith.link@nasa.gov. Organizations who believe they can fulfill these requirements without any detrimental impact to the program schedules supported by this work should fully identify their interest and capabilities in writing to the above email address no later than 3:30 pm EDT, May 20, 2020. Information received will be considered solely for the purpose of determining whether a competitive procurement is in the best interest of the Government.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:80GSFC20R0041
  1. Pre-Solicitation

Formal solicitation typically follows within 30–60 days. (estimate)

  1. Pre-SolicitationCurrentMay 5, 2020

    Laser Interferometer Space Antenna (LISA) Charge Management Device (CMD) Engineering Development

    Notice 4152df5c77274d499b7aae90ad8a75a9 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Attached is the Justification for Other than Full and Open Competition for the Contract award 80GSFC26C0003.
-Sole Source / J&AOpen
The contract action was not awarded competitively and is on a sole source basis under the statutory authority of 10 U.S.C. 3204(a)(1) as implemented by Federal Acquisition Regulation (FAR) Subpart 6.103-1, only one responsible source and no other services will satisfy agency requirements.
-AwardedOpen
DISCLAIMER: THIS IS A REQUEST FOR INFORMATION (RFI)/ SOURCES SOUGHT FOR WHITE PAPERS ONLY. THERE IS NO SOLICITATION AT THIS TIME. The Naval Air Systems Command (NAVAIR) is conducting market research to identify potential industry sources and commercial-off-the-shelf (COTS) capabilities. The PMX-201 Precision Strike Weapons, Effects Deployment Office (FXDO), Network Enabled Weapons Trainer (NEWT) Program requests interested parties submit a white paper detailing their proposed approach or existing capability to develop, manufacture, and maintain an airworthy, Aircraft Carrier suitable store that will emulate all Air launched DOW Network Enabled Weapons (NEW). SUBMISSION INSTRUCTIONS: Format: White papers must be submitted in PDF/Microsoft Word format. Page Limit: Responses shall not exceed 8 pages, excluding the cover page. Font: Times New Roman or Arial, 11-point font or larger. Deadline: All submissions must be received no later than (NLT) Date will be determined 09 November 2026, 5 pm Eastern Standard Time. Delivery: Submit via email to breanne.n.jilcott.civ@us.navy.mil with the subject line: Response to N00019-25-RFPREQ-WPM201-0360 – Company Name The Government acknowledges that white papers may contain proprietary or trade secret information. All proprietary information contained in the response must be clearly marked. The Government will safeguard properly marked proprietary information from unauthorized disclosure in accordance with applicable laws and regulations. Please do not submit classified information or pricing information in response to this RFI. Please provide the following information: 1. Company Name and Address 2. Cage Code and UEI Number 3. Company business size by NAICS code 4. Small Business Type(s), if applicable 5. Point of Contact for questions and/or clarifications (Name, Title, Phone, Email) 6. Telephone Number and email address 7. Web Page URL (if applicable) 8. Teaming Partners (if applicable) 9. Information regarding the viability to receive and process classified information with appropriate contact information 10. Provide any recommendations and/or concerns. 11. Location(s) of work to be performed. Capabilities Statement: • Provide a detailed description of your company's experience, capabilities, and planned approach to develop and manufacture the following: Provide an agnostic Captive Carriage Network Enabled Weapons Trainer (NEWT) to emulate all Network Enabled Weapons (NEWs) employed by aircraft in the DoN inventory. This trainer will have the following: Supportable Platforms The NEWT shall be captive carried from DoN fixed wing platforms that employ Network-Enabled Weapons. The NEWT shall meet exportability requirements to FVEY. Reliability The NEWT shall have a minimum power on time of 4 hrs with a 30 min cool off period for Strike Fighter training, during which the NEWT can be cold soaked at altitude. Maritime Patrol and Reconnaissance Force (MPRF) is 12-hour power-on operations. This includes power on deck (BIT, Mission Planning download, crypto verification) and power while airborne. BLOS communications are needed pre-employment, employment and post simulated launch of long-range NEWs. Supportability The NEWT shall be capable of off-aircraft BIT/ reprogramming using existing CMBRE or other follow-on systems. The NEWT shall be compatible with existing support equipment and test equipment (GSE). Ground Crew shall be able to change the NEWT to the weapon it is emulating without downloading the NEWT from the aircraft. The NEWT shall focus on software modularity instead of hardware interchangeability. The NEWT shall not require liquids or gases that need to be refilled. Program Protection The NEWT shall minimize or eliminate weapons CPI content. The NEWT shall meet current AT / Cyber standards for new hardware (if not already flight proven hardware). Environmental/Structural The NEWT shall be designed for the carrier environment. The NEWT shall be designed for a Vmax of 1.2 IMN The NEWT shall be reusable with a maximum down time of 45 minutes between flights. The NEWT life shall maximize the number of catapults and arrestments. Once the NEWT has reached its service life, maintenance actions to return to flying status are limited to the Organizational (O) and Intermediate (I) level maintenance. Connectivity The NEWT shall utilize all NEW waveforms The NEWT shall be capable of operating between 0-6 GHz including, but not limited to WF L, WF X, WF S, WF Y, and Link-16. The NEWT radio shall be software defined to allow for future waveform growth Hardware The NEWT shall minimize testing requirements to be cleared on the aircraft platform. The NEWT shall be inert with no energetic components The NEWT shall have a clear view of the sky for its own antennas to enter required networks; the NEWT shall not depend on the aircraft platform to communicate with external architecture. The NEWT’s antennas shall be integrated into its Outer Mold Line (OML) and not require deployment of any doors or other mechanisms. The NEWT shall use primary power from the launch platform power source. System Performance The NEWT shall be integrated with the Navy's broader network-centric warfare systems, enabling coordinated operations and enhanced situational awareness. The NEWT shall notify the platform of the receipt and acceptance of Inflight Target Updates (IFTUs). The NEWT shall exercise the network and weapon mission planning processes to include Cryptographic Key Material handling. The NEWT shall not utilize the onboard processing capacity of the host platform. The NEWT shall be capable of all required processing capabilities with 50% growth available. All processing power will be handled internally to the NEWT. This does not include any processing power the platform will need for cockpit display of reception and fly-out. The NEWT shall use the aircraft/weapon interface for the weapon it is emulating (UAI, common flex, 1760, etc) The NEWT shall utilize current Fleet released mission planning system (JMPS/CMPC) as the respective NEW weapon that NEWT is emulating. An emphasis should be placed on minimizing unique planning that deviates from actual weapon mission planning. The NEWT shall be designed for net entry while on the ground, and airborne if NEWT is secured for takeoff. The NEWT shall ingest live, virtual, and constructive tracks from both the continuous learning environment and real-world networks. The NEWT shall emulate the respective dynamic LAR of the weapon that NEWT is emulating. The NEWT shall be designed with future proofing in mind. Future upgrades could involve but not limited to: Open Architecture. Inject new waveforms. Computing power, firmware memory and processor reserve of 50% or greater for future growth. The NEWT shall record data for post flight debrief/analysis including but not limited to: Supply power to the data recorder upon NEWT startup. Enable rapid post flight data extraction via removeable storage or electronic extraction to ensure seamless integration with JMPS / CMPC processing workflows. Maintain open physical and logical access to the memory interface (removeable / electronic) during host aircraft operations with NEWT loaded. Record BLOS IFTUs received and processed Record release conditions at simulated launch. The NEWT shall minimize platform MC code impact. This RFI is issued solely for information and planning purposes—it does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. This request does not commit the U.S. Government to contract for any supply or service whatsoever. Further, the Government is not at this time seeking proposals and will not accept unsolicited proposals. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party’s expense. Not responding to this RFI does not preclude participation in any future RFP, if any is issued. Responses to this Request for White Paper are not quotes on which PMX-201 Precision Strike Weapons can issue any contract. This Request for White Paper is issued for information and planning purposes only and does not in itself constitute a proposal. The Government does not intend to award a contract based only on responses to Request for White Paper. All information received in response to this Request for White Paper marked "Proprietary" will be protected and handled accordingly. Interested parties are responsible for adequately marking proprietary or competition sensitive information contained in their response. The Government reserves the right to ask follow-up clarifying questions to individual companies based on proprietary information submitted without posting those questions. Responses to this Request for White Paper will not be returned. Responders are solely responsible for all expenses associated with responding to this Request for White Paper.
-Market Research11/09/2026
Login at https://piee.eb.mil and search for 'N0001926R1057' to obtain more details.*
-Solicitation05/18/2026
The Jet Propulsion Laboratory (JPL) is reviewing options to find Small Businesses and/or Small Business Joint Ventures or Teams led by a Small Businesses with experience performing the below scope tasks. JPL is seeking information from qualified small businesses with demonstrated experience in the development and integration of high-performance space computing and avionics systems. Relevant capabilities may include HPSC-based processors and single-board computers (SBCs), SOSA S3C/SpaceVPX architectures, plug-in cards and chassis, high-speed networking and data interfaces, power and data handling, flight software, development and test environments, and hardware/software integration. Experience supporting the transition from development systems to flight-qualified hardware is particularly relevant. If interested in this opportunity, please download and complete the attachment documents and submit to the JPL Small Business Programs Office (SBPO) at smallbusiness.programsoffice@jpl.nasa.gov. Also, JPL will host 3 webinars on the dates listed below to address questions live. Contract Technical Managers, the Subcontracts Manager, and representatives from the JPL Small Business Programs Office may be in attendance. Webinar registration links are in the “Attachments/Links” section of the SAM.gov posting. Tuesday, September 8, 2026, 1:00 PM - 2:00 PM PT Wednesday, September 9, 2026, 11:00 AM -12:00 PM PT Thursday, September 10, 2026, 11:00 AM -12:00 PM PT JPL is a Federally Funded Research and Development Center (FFRDC) managed by Caltech University in support of the National Aeronautics and Space Administration (NASA).
-Market Research01/08/2027

Additional Details

Solicitation Number

80GSFC20R0041

Archive Date

Jun 4, 2020

Office Address

GREENBELT, MD, 20771