GovChime
Notice ID: ecbcdb55ae1e591f34daf5da05efe6f2Combined Synopsis/Solicitation

Stepper Motor System for Pandora Instrument

Archived on April 3, 2018. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM UTC−06:00
Posted
March 13, 2018
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
335312: Motor and Generator Manufacturing

Notice details

PSC
66: INSTRUMENTS AND LABORATORY EQPT
Last updated
Dec 6, 2025

Identifiers

Solicitation number
80NSSC18Q0390
Notice ID
ecbcdb55ae1e591f34daf5da05efe6f2

Description

We require a stepper motor system that is equipped with Harmonic Planetary Gear, programmable high step resolution (micro-stepping better than 0.01 degrees) and no backlash. We require several indispensable characteristics; incorporation high resolution Absolute Mechanical/Optical Encoder without backup battery so as to offer not only high flexibility and freedom of the layout design of the control box but also the capability of maintaining absolute positioning information even if the power shuts down during a positioning operation. Motor size 4.7x1.57 (with gears) Driver size 2.76x3.94x1.38 We also require that the positioning information is managed internally in the sensor/driver with no need to home the sensor/driver after any power or hardware failure to avoid any interruption in data acquisition. We require a built-in programmable controller that allows for up-to 256 stored operating data parameters, such as motor speed, home position, acceleration/deceleration, interrupts, step resolution, home position, motion range limits, holding current etc. to be executed by a master controller via Modbus (RTU)/RS-485 with capability to connect multiple units through one master controller.. We require that the motors operate on 24DCV in closed loop mode in order to reduce heat generation from the motor and its driver. We require that the motor's built-in controller offers high communication flexibility with the main computer allowing its easy integration with python software. We require that the motors and their accompanying software can, in real time, manage, check the performance of the motors control and monitor the motors operation parameters such as but not limited to: speed, location, temperatures, and errors.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:80NSSC18Q0390
  1. Combined Synopsis
  1. Combined SynopsisCurrentMar 13, 2018

    Stepper Motor System for Pandora Instrument

    Notice ecbcdb55ae1e591f34daf5da05efe6f2 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

80NSSC18Q0390

Archive Date

Apr 3, 2018