Notice ID: 311117a4d00639e27b18a2cbc1856250Combined Synopsis/Solicitation
1 Laboratory Immersion Ultrasonic Scanning System.
Archived on May 5, 2018. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 8:00 AM UTC−06:00
- Posted
- April 17, 2018
- Notice type
- Combined Synopsis/Solicitation
- NAICS
- 541380: Testing Laboratories and Services
Notice details
- PSC
- 99: MISCELLANEOUS
- Last updated
- Dec 6, 2025
Identifiers
- Solicitation number
- 80NSSC18Q0503
- Notice ID
- 311117a4d00639e27b18a2cbc1856250
Description
Synopsis: NASA/NSSC has a requirement for Laboratory Immersion Ultrasonic Scanning System. NASA/NSSC intends to issue a sole source contract to MISTRAS GROUP, INC. 195 CLARKSVILLE RD PRINCETON JUNCTION NEW JERSEY 08550-5392 UNITED STATES under the authority of FAR 13.106-1(b)(1)(i). It has been determined that MISTRAS GROUP, INC. is the sole provider of Laboratory Immersion Ultrasonic Scanning System. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Langley Research Center (LARC). The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13. The NAICS Code for this procurement is 541380 Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 8:00 p.m. Central Standard Time on April 20, 2018. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html . Primary Point of Contact: Courtenay Pierce Contract Specialist Courtenay.B.Pierce@nasa.gov
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
80NSSC18Q0503- Combined Synopsis
- Combined SynopsisCurrentApr 17, 2018
1 Laboratory Immersion Ultrasonic Scanning System.
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Request for Information (RFI) only. Purpose This RFI seeks information regarding Laboratory Capabilities to perform pool and torch fire tests of Thermal Protection Systems (TPS) to the U.S. DOT Volpe Center. A qualified vendor must be capable of performing pool and torch fire tests as described in 49 CFR 179 Appendix B. The vendor should also be capable of performing light fabrication and/or assembly of test specimens for the aforementioned tests. Qualified vendors are requested to respond as detailed further below, which includes capability, small business classification, estimated lead time including any risks that may impact delivery, and any other industry concerns the government might consider before solicitation. The intent is to gather information to inform a possible future procurement or contract. Background The Federal Railroad Administration (FRA) is conducting research into the performance of TPS for railroad tank cars. TPS are designed to delay or prevent the catastrophic release of hazardous materials from a railroad tank car exposed to fires that may result from train derailments. In the FRA’s planned research, test specimens of TPS are to be evaluated in simulated pool fire and torch fire conditions similar to those defined in Appendix B to 49 CFR 179. The durations of the fire exposure would extend beyond the 100 minute pool fire and 30 minute torch fire duration specified in Appendix B to 49 CFR 179. Pool fire test specimens are applied to a 1 foot by 1 foot steel plate of nominal 0.625 inch thickness. Torch fire test specimens are applied to a 4 foot by 4 foot steel plate of nominal 0.625 inch thickness. The Volpe Center is looking to perform a minimum of two (2) pool fire tests and two (2) torch fire tests for each TPS. The total number of TPS to be tested has not yet been determined. Although the tests will be similar to those defined in 49 CFR 179 Appendix B, this research may require some modifications to the test protocol including but not limited to additional instrumentation, data collection or varying of test parameters such as duration of the fire exposure. The Volpe Center is also looking for the capability to perform light fabrication of test specimens as detailed above. For examples of possible fabrication requirements, see https://www.phmsa.dot.gov/standards-rulemaking/hazmat/tank-car-thermal-protection-system-list Scope of Information Requested The U.S. DOT Volpe Center is seeking information from commercial testing laboratories, university laboratories, and other interested parties on their willingness, ability, and experience in conducting the simulated pool and torch fire testing planned for various tank car TPS. Descriptions of your facility’s pool and torch fire testing capabilities, including equipment, experience, capacity, resources and staff preparedness for testing tank car TPS. You are encouraged to submit publications of relevant past work. Descriptions of any laboratory accreditation or certification related to pool fire testing. Laboratory hourly rates, technical personnel rates, general facility and equipment usage charges, overhead and other expenses, etc. Descriptions of staff/facility/equipment availability, including any limitations on when fire testing may be conducted (e.g., blackout dates due to seasonal weather conditions) Information on any pre-test data or preliminary sample testing that may be required prior to a full-scale test. Information on your typical post-test laboratory analyses and report formats, and your ability to tailor report/data formats to customer requirements. Description of your facility’s fabrication and assembly capabilities, including: Cutting of 11 gauge steel sheet (0.1196 inches) Cutting of 0.625 inch steel plate Cutting of insulating materials that may generate hazardous airborne particulates such as fiberglass. Mixing and application of coatings to required specifications similar to examples on the PHMSA TPS list. What is the required lead time for fabrication of test specimens? Technical personnel rates, general facility and equipment usage charges, overhead and other expenses, etc. for fabrication of test specimens. Estimated time to conduct one simulated pool fire and one simulated torch fire test including setup, conduct of the test, cooldown, and teardown of test setup. Any other comments that can help the U.S. DOT Volpe Center better define the research scope and direction and ultimately yield technical data beneficial to both the government and industry are welcome. Responses should include the above as well as: Company information Name UEI Address POC information This RFI is for information and planning purposes only and is a market research tool to determine the availability and adequacy of sources prior to determining the method of acquisition and possible issuance of a Request for Quotation (RFQ). This RFI does not constitute a solicitation for bids, quotations, and proposals, and is not to be construed as a commitment by the Government. The information provided herein is subject to change and in no way binds the Government to solicit for or award a competitive contract. All information submitted in response to this announcement is voluntary, and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. | 63% | Market Research | 11/20/2026 |
63% | Awarded | 09/25/2026 | |
63% | Awarded | 11/19/2025 | |
63% | Awarded | 08/28/2025 | |
63% | Awarded | 04/29/2025 |
Additional Details
Solicitation Number
80NSSC18Q0503
Archive Date
May 5, 2018