Notice ID: 7270942a3382f25db7c11f2320dce999Combined Synopsis/Solicitation
ACCO 2 Ton Speedway Cross Mounted Monorail Hoist and Installation Labor
Archived on April 30, 2019. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 1:00 PM UTC−06:00
- Posted
- April 11, 2019
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 333923: Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
Notice details
- PSC
- 66: INSTRUMENTS AND LABORATORY EQPT
- Last updated
- Jan 23, 2026
Identifiers
- Solicitation number
- 80NSSC19Q0418
- Notice ID
- 7270942a3382f25db7c11f2320dce999
Description
Synopsis: NASA/NSSC has a requirement for ACCO 2 Ton Speedway Cross Mounted Monorail Hoist and Installation Labor. This a Brand Name or Equal To requirement. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Langley Research Center (LARC). This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-99. The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13. This is a Request for Quotations (RFQ), 80NSSC19Q0418. Additional details are included in the attached RFQ file. The attached RFQ file is hereby incorporated into this solicitation. Delivery is FOB Destination. This Procurement is Set Aside for Small Business The NAICS Code for this procurement is 333923 All responsible sources may submit a quote which shall be considered by the agency. However, any award from this RFQ shall require the potential vendor to be certified within the System for Award Management System (SAM) and completion of Reps and Certs in the SAM system prior to award at www.sam.gov. Quotes for the item(s) described in the RFQ are due by 4/15/2019 by 01:00 p.m. CT to Enter Name at Enter email address in order to be considered for award. If it is in the best interest of the Government, quotes submitted after the due date may be accepted. If the end product offered is other than a domestic end product as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. All contractual and technical questions must be in writing (e-mail) to Ryan Adams at ryan.c.adams@nasa.gov no later than 4/12/2019 by 01:00 p.m. CT. Telephone questions shall not be accepted. The following clauses and provisions are applicable to this combined synopsis/solicitation: 52.212-1, Instructions to Offerors; 52.212-3 Offeror Representations and Certifications-Commercial Items; 52.212-4 Contract Terms and Conditions-Commercial Items; 52-212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html . The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.html The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.html Offerors must include completed copies of the provision at 52.212.3 Offeror Representations and Certifications-Commercial Items with their offer. These representations and certifications will be incorporated by reference in any resultant contract. Contracting Office Address: NASA Shared Services Center, Jerry Hlass Rd. Stennis Space Center, MS 39529
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
Select documents to download
Showing 2 of 2 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
| Combined Synopsis/Solicitation | SAM.gov | Apr 11, 2019 | - | |||
| Combined Synopsis/Solicitation | SAM.gov | Apr 11, 2019 | - |
Lifecycle
Solicitation:
80NSSC19Q0418- Combined Synopsis
- Special NoticeApr 1, 2019
ACCO 2 Ton Speedway Cross Mounted Monorail Hoist and Installation Labor
- Combined SynopsisApr 8, 2019
ACCO 2 Ton Speedway Cross Mounted Monorail Hoist and Installation Labor
- Special NoticeApr 11, 2019
ACCO 2 Ton Speedway Cross Mounted Monorail Hoist and Installation Labor
- Combined SynopsisCurrentApr 11, 2019
ACCO 2 Ton Speedway Cross Mounted Monorail Hoist and Installation Labor
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
| - | Awarded | Open | |
Proposed procurement for NSN 3940016001309 SLING,CARGO,NET: Line 0001 Qty 125 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0374 DAYS ADO Line 0002 Qty 125 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0374 DAYS ADO Line 0003 Qty 1 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0045 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically. | - | Combined Synopsis | 11/17/2026 |
Proposed procurement for NSN 3950014156605 WINCH,DRUM,POWER OPERA: Line 0001 Qty 7 UI EA Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0172 DAYS ADO This is a source controlled drawing item. Approved source is 08302 B736A. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. The items furnished must meet the requirements of the drawing cited in the solicitation. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically. | - | Combined Synopsis | 11/19/2026 |
Proposed procurement for NSN 2030011668056 CHAIN,OUTER ROLLER: Line 0001 Qty 10806 UI EA Deliver To: DLA DISTRIBUTION WARNER ROBINS By: 0165 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically. | - | Combined Synopsis | 11/19/2026 |
Salient CharacteristicsItem: Pneumatic Chain Hoist Assembly, Lug-Mounted.Brand Name or Equal To. Cisco-Eagle SKU TCRP-1627048 reference model TCRP2000P2.Quantity 2 eaches.1. Required Function. The contractor shall furnish one new, complete, commercially available pneumatically chain hoist assembly for lifting and vertically positioning loads in an overhead lifting application. The offered item shall be fully functional upon delivery and include all components identified below that are necessary for normal operation.2. Mandatory Salient Characteristics. The offered hoist assembly shall meet all of the following minimum requirements:CHARACTERISTIC. MINIMUN GOVERNMENT REQUIREMENTType. Pneumatically powered chain hoist assembly.Rated lifting capacity. Minimum rated capacity of 2 short tons i.e. 4,000 lb.Lift height. Minimum 10 foot vertical lift.Mounting configuration. Lug mounted configuration.Bottom hook. Furnished with a standard bottom hook suitable for the offered hoists rated capacity.Pendant control. Furnished with a pendant control. Pendant length shall be 7.5 feet, measured from the hoist, control connection point to the pendant control, or equivalent length necessary to provide the same operating reach.Chain container. Furnished with a canvas chain container sized to safely contain the full length of load chain associated with the required 10 foot lift.Structural, track interface. The assembly shall be compatible with the Governments existing flange, track interface identified as a 4 inch flange configuration with an applicable flange range of 3.23 inches through 6.02 inches. The vendor shall identify the specific mounting/trolley/interface dimensions of the offered item and certify compatibility with this requirement.Condition. New. Current-production equipment; used, refurbished, remanufactured, or demonstrator equipment is not acceptable.Completeness. Furnished as a complete operational assembly, including the hoist, required mounting/interface components, bottom hook, pendant control, and chain container.Documentation. Furnish manufacturer product literature, dimensional information, installation instructions, operating instructions, maintenance information, rated-capacity information, and warranty documentation.Identification Hoist shall bear permanent manufacturer identification and rated-capacity marking.The reference item identifies the item as a TCRP2000P2 hoist with a 2-ton capacity, 10-foot lift, lug mounted, standard bottom hook, 4 inch Flange 3.23-6.02 inch Flange Range, canvas chain container, and Standard-to-Lift Pendant Length - L = 7.5 ft.3. Offeror Submission RequirementsTo be considered technically acceptable, the vendor shall provide the following with its quotation.Manufacturer name and exact manufacturer part number for the item offered.Manufacturer descriptive literature, specification sheet, and dimensional drawing sufficient to verify:Rated capacity.Lift height.Lug-mount configuration.Bottom-hook configuration.Pendant length.Chain-container material and capacity andCompatibility with the stated 3.23-6.02-inch flange, interface range.If proposing an equal product, clear identification that the product is an equal product, rather than the referenced item.Warranty terms and the name and address of the warranty service point of contact.Proposed delivery lead time and shipping terms.Offerors proposing an equal product shall identify the offered make, model and provide descriptive literature or other adequate descriptive data showing that the item meets the solicitations salient characteristics.4. Technical Acceptability Language. Technical acceptability will be evaluated on a pass/fail basis. The quotation will be considered technically acceptable only if the offeror provides sufficient documentation demonstrating that the offered item meets every mandatory salient characteristic. Failure to provide adequate supporting documentation may render the quotation unacceptable.5. Delivery and Acceptance Language. Delivery shall be F.O.B. Destination to the delivery location identified in the solicitation. The Government will inspect the item upon delivery for quantity, visible shipping damage, completeness, manufacturer identification, rated-capacity marking, and compliance with the quoted make and model and required salient characteristics. Acceptance is contingent upon satisfactory inspection and verification of required documentation. | - | Combined Synopsis | 11/13/2026 |
Additional Details
Solicitation Number
80NSSC19Q0418
Archive Date
Apr 30, 2019