GovChime
Notice ID: 749bf82c2e17418c847225c8f6c3c80eSpecial Notice

Custom Hardware Upgrades for the Nanovea Profilometer (P1-RMA-WARR)

Archived. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
10:00 AM UTC−06:00
Posted
January 7, 2022
Notice type
Special Notice
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
National Aeronautics and Space Administration

Notice details

Office
NASA SHARED SERVICES CENTER
Place of performance
Cleveland, OH, 44135
Last updated
Dec 4, 2025

Identifiers

Solicitation number
80NSSC22790314Q
Notice ID
749bf82c2e17418c847225c8f6c3c80e

Description

Synopsis: NASA/NSSC has a requirement for Custom Hardware Upgrades for the Nanovea Profilometer (P1-RMA-WARR). NASA/NSSC intends to issue a sole source contract to Nanovea, Inc., 6 Morgan STE 156, Irvine, California 92618-1922 United States under the authority of FAR 13.106-1(b)(1)(i). It has been determined that Nanovea, Inc. is the sole provider of Custom Hardware Upgrades for the Nanovea Profilometer (P1-RMA-WARR). NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Glenn Research Center (GRC). The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13. The NAICS Code for this procurement is 334516 Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 10:00 a.m. Central Standard Time on 1/13/2022. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html .

Full description on SAM.gov

Award Overview

Possible prior contract

Inferred, not confirmed

Inferred, not confirmed. Matched by agency, NAICS, place of performance and end-date proximity. This is a candidate, not the contractor of record.

Contract end date

Jun 24, 2022

NAICS

334516

Agency

National Aeronautics and Space Administration

Dollar amounts are not shown for inferred matches because the link is heuristic. Open the award below to check it.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:80NSSC22790314Q
  1. Special NoticeCurrentJan 7, 2022

    Custom Hardware Upgrades for the Nanovea Profilometer (P1-RMA-WARR)

    Notice 749bf82c2e17418c847225c8f6c3c80e on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
**THIS IS A SOLE SOURCE REQUIREMENT** Facility Modicon PLC Control hardware. Upgrading obsolete drops.
-Special Notice11/13/2026
Notice from the United States Air Force, Air Force Life Cycle Management Center (AFLCMC), Installation Contracting Division, Base Support Contracting Branch at Wright-Patterson Air Force Base (WPAFB), Ohio: The AFLCMC Operational Contracting Branch, Wright-Patterson AFB, Ohio is seeking capabilities packages of potential sources including Small Businesses (SB). This sources sought synopsis is published for market research purposes only, to identify potential sources capable of delivering a Nano-Aerosol Analyzer with the capabilities described herein for the Air Force Institute of Technology, located at Wright Patterson Air Force Base, Ohio (WPAFB). The Government is seeking capabilities packages from all potential sources, including but not limited to: small business (SB), 8(a) participants, HUBZone Small Business, Economically Disadvantaged Women-Owned Small Business (EDWOSB), Women-Owned Small Business (WOSB), Small Disadvantaged Business (SDB) and Service-Disabled Veteran-Owned Small Business (SDVOSB). Firms that respond shall review the attached instructions and technical requirements and submit responses that: Specify that offered products meet the specifications provided below; and Provide detailed information to show clear technical compliance. THIS SOURCES SOUGHT IS FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSALS/QUOTES. All interested firms shall submit a response to the Primary Points of Contact, Ms. Claire Hess at claire.hess@us.af.mil and Ms. Jessica Stamper at jessica.stamper.2@us.af.mil, demonstrating their capability to provide a Nano-Aerosol Analyzer. Responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. A solicitation for this requirement does not exist, therefore, do not request a copy of the solicitation. The decision to solicit for a contract will be solely within the Government's discretion. The North American Industry Classification System (NAICS) code assigned to this acquisition is 334516 (Analytical Laboratory Instrument Manufacturing) with a small business-size standard of 1,000 employees. Firms responding should indicate socio-economic status (8(a) with Graduation Date, SDVOSB, EDWOSB, WOSB, small business, and/or HUBZone). All respondents may identify potential small-business sources for components, accessories, installation, training, maintenance, or other support associated with the requirement. The Government reserves the right to consider a small business set-aside based upon responses hereto for any subsequent action. All prospective contractors must be registered in the System for Award Management (SAM) database to be awarded a Department of Defense (DoD) contract. A small business set-aside decision has not yet been made. Identify whether your firm is the manufacturer of the proposed end item or an authorized distributor/reseller. If not the manufacturer, identify the proposed manufacturer, its business size, and the country of origin of the proposed end item.” Any information submitted by respondents to this Sources Sought is voluntary. This Sources Sought notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice. Respondents will not be individually notified of the results of any Government assessments. The Government's assessment of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small business or any particular small business program. CAPABILITIES PACKAGE: All interested firms shall submit a capabilities package to provide the Nano-Aerosol Analyzer that explicitly demonstrates their capability to provide the required product. The capabilities package should be brief and concise yet clearly demonstrate an ability to meet the stated requirements. However, the response must not exceed five (5) pages. Capabilities Packages submitted in response to this sources sought synopsis must be received at the following e-mail addresses NO LATER THAN 17 NOVEMBER 2026 AT 3:00 PM EASTERN TIME. All correspondence sent via email shall contain a subject line that reads: Nano-Aerosol Analyzer. If this subject line is not included, the email may not get through email filters at WPAFB. Filters are designed to delete emails without a subject or with a suspicious subject or attachments. Attachments with files ending in .zip or .exe are not allowable and will be deleted. Ensure only .pdf, .doc, .docx, .xlsx or .xls documents are attached to your email. All other attachments may be deleted. Responses shall be submitted via email to the following addresses: claire.hess@us.af.mil and jessica.stamper.2@us.af.mil Please direct all questions concerning this acquisition to Ms. Claire Hess at claire.hess@us.af.mil and include the necessary subject line indicated above. Attachments: Instructions Statement of Work
-Market Research11/17/2026
This is a Brand Name requirement for APCRBC140 replacement battery cartridges from APC by Schneider Electric. See the attached Specifications, Brand name justification, and RFQ document for full details of the requirement. ALL OFFERORS (i.e. the vendor that will receive the award payment) MUST PROVIDE PROOF OF PRICING FROM THE MANUFACTURER, AND CONFIRM AUTHORIZATION (from the original equipment manuafacturer)TO RESELL THE ITEMS LISTED IN THE STATEMENT OF WORK TO BE CONSIDERED FOR AWARD. Partial quotes will not be accepted. All correspondence must reference the notice ID in the subject line to ensure visibility.
-Combined Synopsis11/09/2026
Value Proposition: ThermaSpin, developed by scientists at Los Alamos National Laboratory, provides a reliable, cost-effective way to measure the flow behavior (viscosity) of extremely hot and reactive liquids, such as molten salts and metals, under realistic operating conditions. Unlike existing solutions that are expensive, complex or poorly suited for low-viscosity fluids, this enclosed high-temperature viscometer delivers high sensitivity, small sample requirements and precise atmospheric control, enabling accurate measurements without exposing materials to air or contamination. This capability is critical for industries such as advanced nuclear energy, thermal energy storage and high-temperature materials processing, where fluid properties directly impact system performance, safety and design. By making these measurements more accessible and practical, the ThermaSpin High-Temperature Viscometer reduces development risk, lowers testing costs and accelerates innovation in next-generation energy and industrial systems. The Challenge: Accurately measuring the viscosity of molten salts and other high-temperature liquids is extremely difficult because these materials exist under harsh conditions—temperatures approaching 1,000°C, high chemical reactivity and sensitivity to air and moisture. Traditional measurement techniques often lack the sensitivity needed for these low-viscosity fluids or require specialized, resource-intensive methods that are not widely accessible. In addition, many approaches demand large sample volumes, which can be impractical or hazardous when working with corrosive or toxic materials. Maintaining a controlled environment during testing further complicates measurements, as even minor contamination can alter results. Together, these challenges create a significant barrier to obtaining reliable data on fluid behavior in systems where precise performance understanding is essential. Problems Solved: ThermaSpin High-Temperature Viscometer addresses these challenges by providing a sealed, high-temperature measurement system that can operate reliably in extreme environments while maintaining strict control over sample purity. Its rotational design, coupled with a highly sensitive torsion-based measurement approach, enables accurate detection of the very low forces associated with low-viscosity molten fluids—something conventional instruments struggle to achieve. The enclosed architecture allows operation under inert or controlled atmospheres, preventing contamination from air or moisture, while also supporting smaller sample sizes to reduce risk and material constraints. By integrating temperature resilience, corrosion compatibility and precise mechanical measurement into a single platform, ThermaSpin overcomes the key technical and practical limitations that have historically restricted viscosity characterization in these demanding conditions. Key Advantages: Extreme temperature capability (~1000°C): Reliable operation for molten salts, metals and other high-temperature fluids High sensitivity for low-viscosity liquids: Accurately captures subtle flow behavior that conventional viscometers miss Sealed, controlled environment: Maintains sample purity by preventing exposure to air and moisture Handles corrosive and hazardous materials: Durable design compatible with chemically aggressive substances and smaller sample sizes No specialized infrastructure required: Eliminates dependence on costly, limited-access techniques like neutron imaging Versatile and integration-ready: Adaptable to multiple applications and compatible with inert atmosphere systems (e.g., glove boxes) Market Applications: Advanced Nuclear Energy: Molten salt reactors (MSRs), fusion systems and fuel cycle development Thermal Energy Storage & CSP: High-temperature heat transfer and storage fluids for renewable energy systems Metallurgy & Metal Processing: Molten metal monitoring in refining, casting and advanced manufacturing Chemical Processing: High-temperature and corrosive fluid handling in industrial chemical production Research & Development: National labs, academia and industry studying thermophysical properties of extreme-condition materials Defense & Government Applications: Controlled characterization of hazardous or sensitive molten materials in secure environments Development Status: TRL 3 US Patent pending LA-UR-26-26227 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
-Special Notice04/01/2027
Notice of Intent to Sole Source Department of Veterans Affairs, VISN 10, Northern Indiana VAHCS, 1700 East 38th St., Marion, IN 46953, intends to solicit and negotiate with only one source under Simplified Acquisition Procedures and the authority of FAR Part 6.302-1, Only One Responsible Source for Reagents. The associated NAICS code for this is 334516. The vendor will be Roche Diagnostics Corp., 9115 Hague Rd., Indianapolis, IN 46256. Description of Equipment or Supplies Added to Current Contract: Product Name QTY A1C 22787 Acetaminophin 58 AFP 491 ALB 27937 ALP 27280 ALT 27493 Ammonia (NH3) 250 Amphetamines 3722 Amylase 376 Anti-HAV IgM 129 Anti-HBc 267 Anti-HBc IgM 255 Anti-HBs 753 Anti-HCV 1065 AST 27423 Barbituates 3725 Benzodiazapine 3731 Betahydroxybuterate 43 Bilirubin-Direct 4643 Bilirubin-Total 27271 BUP 671 Calcium 32551 CEA 130 Chloride 32573 Cholesterol 22106 CK 947 CO2 32565 COC 3725 Cortisol 107 Creatinine 34477 CRP 1043 CystC 1033 Dig 112 ETOH 453 FEN 3559 Ferritin 2289 FOLATE 2701 Free T3 199 Free T4 2007 FSH 174 GGT 170 Glucose 32527 HBsAg 885 HcG 60 HDL 22113 High Sensitive CRP 45 HIV 777 IGA 97 IGG 93 IGM 97 IRON 2377 Lactate 513 LDH 231 LDL - Direct 1392 LH 161 Lipase 713 Lithium 177 Magnesium 5685 Methodone 3728 Microalbumin 7850 Opiates 3725 Oxycodone 3755 PCP 3729 Phenytonin 71 Phosphate 1009 Potassium 32709 Prealbumin 35 Pro-BnP 859 Procalcitonin 293 Prolactin 188 PSA 10521 PTH 527 Rheumatoid Factor 325 Salicylates 57 Sodium 32641 T4 67 Testo 1563 THC 3729 Total Protein 27259 Triglycerides 22591 Troponin T 1215 TSH 18616 UIBC 2344 Urea Nitrogen/BUN 33051 Uric Acid 781 Urine Total Protein 501 Valproic Acid 221 Vancomyacin 31 Vit B12 3021 VIT D 18771 Northern Indiana Health Care System utilizes these tests with existing Roche Cobas Pros instruments for testing. A firm fixed price contract is anticipated and shall be awarded. It is the Government's belief that only the proposed candidate possesses the required capabilities to successfully meet this requirement. It is the Government's intention to negotiate with only this source. This notice of intent is not a request for competitive proposals. It is not a solicitation or request for offers. No solicitation package is available. Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Responses must be received no later than 12:00 pm on Friday, October 30, 2026. Point of contact is Rachel MacRae, e-mail rachel.macrae@va.gov.
-Special Notice10/30/2026

Additional Details

Solicitation Number

80NSSC22790314Q

Archive Date

Not specified

Office Address

STENNIS SPACE CENTER, MS, 39529