Notice ID: a5fd81f9311b46a5a10f9a4c432e4776Special Notice
4 slip ring to pass cables through a course pointing system for balloon payloads.
Archived. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM UTC−04:00
- Posted
- July 14, 2022
- Notice type
- Special Notice
- NAICS
- 332999: All Other Miscellaneous Fabricated Metal Product Manufacturing
- Agency
- National Aeronautics and Space Administration
Notice details
- Office
- NASA SHARED SERVICES CENTER
- Place of performance
- Greenbelt, MD, 20771
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- 80NSSC22805399Q
- Notice ID
- a5fd81f9311b46a5a10f9a4c432e4776
Description
NASA/NSSC has a requirement for 4 slip ring to pass cables through a course pointing system for balloon payloads. NASA/NSSC intends to issue a sole source contract to United Equipment Accessories Inc. 2103 E Bremer AVE, Waverly, Iowa 50677-4022 United States under the authority of FAR 13.106-1(b)(1)(i). It has been determined that United Equipment Accessories Inc. is the sole provider of 4 slip ring to pass cables through a course pointing system for balloon payload. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Goddard Space Flight Center (GSFC). The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13. The NAICS Code for this procurement is 332999. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 4:00 p.m. Central Standard Time on 7/18/2022. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html .
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
80NSSC22805399Q- Special NoticeCurrentJul 14, 2022
4 slip ring to pass cables through a course pointing system for balloon payloads.
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The Naval Surface Warfare Center, Indian Head Division Picatinny Detachment (Government) requires the manufacture and assembly of MK 3 MOD 2 Strong Back Lifting beam Ordnance Handling Equipment (OHE), other Undefined OHE as well as spare parts, which are required for the movement, transportation and storage of various naval storage containers. This handling equipment supports multiple Navy program weapons containers. Amendment 0001 posted 4-16-26. Amendment 0002 posted 4/30/26. Amendment 0003 posted 5/5/26. Amendment 0004 posted 5/5/26. Amendment 0005 posted 5/6/2026. | - | Solicitation | 05/13/2026 |
SPECIAL NOTICE: VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT. NASA/NSSC has a requirement for INRODES Supplemental RDRE TCA Hardware NASA/NSSC intends to issue a sole source contract to Additive Manufacturing Engineering under the authority of FAR 12.102(a). It has been determined that Additive Manufacturing Engineering is the sole provider of INRODES Supplemental RDRE TCA Hardware NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC). The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial The NAICS Code for this procurement is 332999. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 3:00 p.m. Central Standard Time on 11/11/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements. NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf . Primary Point of Contact: Cody Guidry Procurement Specialist II Cody.d.guidry@nasa.gov | - | Special Notice | 11/11/2026 |
** THIS IS A SOLE SOURCE REQUIREMENT ** for STAINLESS JACK SCREW | - | Special Notice | 10/28/2026 |
The Arnold Engineering Development Complex (AEDC) Tunnel 9, located in Silver Spring, MD, requires the comprehensive modernization of a high-performance hydraulic motion system. The scope of this Firm Fixed-Price (FFP) requirement includes the design, engineering, procurement, off-site fabrication, pre assembly, on-site demolition, installation, and commissioning of core system components. All components must comply with ASME B31.1, ASME BPVC VIII, and ISO 4406 standards. Core components include: • Primary control valve (step response time of 55 ms or less) • Main actuating cylinder (working stroke of 120.5” capable of achieving a linear speed of 13 ft/s) • Hydraulic Power Unit (HPU) • Dedicated filtration and cooling "kidney" loop. | - | Solicitation | 12/10/2026 |
This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a separate written solicitation will not be issued. The Request for Quote (RFQ) number 70ZU0227P40010B00 applies and is used as the solicitation number. This solicitation document and the incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-01 and effective date 03/13/2026. It is anticipated that a competitive, firm-fixed-price purchase order will be awarded as a result of this synopsis/solicitation on a LPTA basis. All responsible sources may submit a quotation, which, if timely received, shall be considered by this agency. Vendors must have an active registration in SAM.gov prior to award. Payments will be made Net 30 in accordance with FAR 52.232-25, Prompt Payment. This is a Brand Name Only solicitation. No substitutions will be authorized. Interested vendors must be an authorized distributor for the requested material and are required to provide an authorized distributor letter from the Original Equipment Manufacturer (OEM) with their quotation. Quality Assurance: The vendor shall be capable of accommodating an on-site inspection by a Coast Guard Quality Assurance Representative (QAR) before shipment. During the scheduled QA inspection, each bearing sleeve shall be dimensionally verified in accordance with the current OEM drawing. The contractor shall make the latest revision of the OEM drawing available to the QAR at the time of inspection. The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items: NSN: 3120 21-912-7634 DESCRIPTION: BEARING, SLEEVE MFG NAME: THORDON BEARINGS INC. PART NBR: TBF778952119 QUANTITY: 3 EA PACKAGING AND MARKING REQUIREMENTS: INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MILSTD-2073-1E METHOD 10, CUSHIONED IN A DOUBLE LAYER OF 3/4 IN BUBBLE WRAP AND PACKED IN AN APPROPRIATELY SIZED ASTM-D6251 TYPE III, CLASS 1 WOOD-CLEATED PANELBOARD SHIPPING BOX OR ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED WOODEN BOX. MARK IN ACCORDANCE WITH MIL-STD-129R AND BAR CODE IAW ISO/IEC-16388-2007 CODE 39 SYMBOLOGY. PACKAGE LABEL: ITEM NAME: PART NUMBER: NSN: QNTY: (EXAMPLE 1 EA) COND-A CONTRACT NUMBER / ORDER NUMBER FOR TECHNICAL INQUIRIES: POC: BRADY MYERS EQUIPMENT SPECIALIST E-MAIL: BRADY.A.MYERS@USCG.MIL PH: 571-613-3388 Delivery Information REQUIRED DELIVERY DATE: 2/1/2027 ALTERNATE DELIVERY DATE: If you are unable to meet the required date, please provide your earliest date: _______ Total cost must include all delivery and freight charges. SHIPPING TERMS: FOB Destination is required. SHIP TO ADDRESS: UNITED STATES COAST GUARD (SFLC) RECEIVING ROOM - BLDG. 88 2401 HAWKINS POINT ROAD BALTIMORE, MD 21226 Preparation for Delivery & Invoicing Preparation for Delivery All material must be shipped to the address specified above and be accompanied by an itemized packing list securely attached to the outside of the shipment, citing the Purchase Order Number. Material shall be packed to afford adequate protection against corrosion, deterioration, and physical damage during shipment and for warehouse storage. Deliveries are accepted Monday through Friday between the hours of 8:00am to 3:00pm . Invoicing in Invoice Processing Platform (IPP) All invoices must be submitted for payment through the IPP at https://www.ipp.gov. Invoices must contain the contract number, invoice number, vendor UEI, TIN, CAGE code, line-item numbers, description of supplies, unit prices, and extended totals. For assistance with IPP, please contact IPP Customer Support at (866) 973-3131 or IPPCustomerSupport@fiscal.treasury.gov. | - | Solicitation | 11/17/2026 |
Additional Details
Solicitation Number
80NSSC22805399Q
Archive Date
Not specified
Office Address
STENNIS SPACE CENTER, MS, 39529