Notice ID: 0b241cfa5c6e483d96d66b5828141cf1Special Notice
Additively manufacture test specimens from supplied superalloy powder
Archived. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM UTC−05:00
- Posted
- September 8, 2022
- Notice type
- Special Notice
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 541715: Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- Agency
- National Aeronautics and Space Administration
Notice details
- Office
- NASA SHARED SERVICES CENTER
- PSC
- 9610: ORES
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- 80NSSC22811275Q
- Notice ID
- 0b241cfa5c6e483d96d66b5828141cf1
Description
STATEMENT OF WORK For Additively Manufactured (AM) Ni-Co-Cr-W-Re-yttria demonstration and specimen rectangular blanks. 1.0 Introduction/Background The National Aeronautics and Space Administration (NASA) would like to build upon prior AM work done on NiCrAl, extending it to include experimental NiCoCrWRe alloys with yttrium oxide (yttria) additions and demonstrating AM feasibility. NASA will be making this alloy powder in three different ways and hence batches. Since the alloys will be essentially the same, we expect them to employ similar AM build parameters, however, confirming this and making any needed modifications to such parameters shall be responsibility. 2.0 Scope of Work NASA shall provide three batches of NiCoCrWRe-yttria powder each made using different powder processing methods. Each batch will be shipped to the vendor at a different time within the next 3 years. Each batch shall be at least 30 pounds in weight with size of -325 mesh (5% max +325) . The vendor shall develop suitable process conditions, by building small blocks at varied parameters for determination of suitable settings. The vendor will share images and mounted specimens of these small blocks to help facilitate selection of mutually agreed settings. The vendor shall then print the following deliverables for each batch as outlined in section 3.0 Tasks. 3.0 Tasks 3.1 For each batch of powder build blanks, then heat in inert or vacuum environment to stress relieve them while still on the build plate. Please provide images of the entire build plate showing the blanks, annotating their assigned/printed identification numbers. Final dimensions once removed from build plate: 3.1.1 8 Horizontal Blanks, dimensions: 14.5 x 14.5 x 66.0 mm. The vendor will recommend for NASA approval how to arrange the blanks on the build plates. 3.1.2 8 Vertical Blanks, dimensions: 14.5 x 14.5 x 66.0 mm. The vendor will recommend for NASA approval how to arrange the blanks on the build plates. 4.0 For each batch, the vendor will separately wrap in paper each blank and ship the following to NASA: 4.1.1 8 Horizontal Blanks dimensions: 14.5 x 14.5 x 66.0 mm (from 3.1.1) 4.1.2 8 Vertical Blanks, dimensions: 14.5 x 14.5 x 66.0 mm (from 3.1.2) 4.1.3 Deliver in an airtight sealed container all remaining NiCoCrW-yttria alloy powder that was not used for the above builds in 3.1 (starting powder, virgin). 4.1.4 Deliver in an airtight sealed container all remaining NiCoCrW-yttria alloy powder post printing (recycled) from the above builds.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
80NSSC22811275Q- Special NoticeCurrentSep 8, 2022
Additively manufacture test specimens from supplied superalloy powder
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
The NASA SBIR/STTR Program is moving to a Broad Agency Announcement (BAA) (See more in FAR 35.016 https://www.acquisition.gov/far/35.016) to procure research and development activities from small businesses. This Broad Agency Announcement (BAA) sets the requirements for you, the offeror, to submit a proposal to NASA for Small Business Innovation Research (SBIR) (including SBIR Ignite) and Small Business Technology Transfer (STTR) Program Phase I and Phase II projects. NASA will solicit proposals for specific funding opportunities by releasing appendices to this BAA throughout the effective period of this BAA. This document contains the objectives, funding information, proposal preparation instructions, and eligibility criteria. Each released appendix will contain instructions to submit a proposal package and the solicited research and technology subtopics for the specific funding opportunity. Requirements specific to each opportunity will be included in the appendices. In any instance where specific requirements in appendices conflict with requirements in the BAA, the specific requirements in the appendices take precedence for that opportunity. As of the release of this BAA, NASA does not have an exact number of planned appendices, but the program anticipates releasing 2 to 3 appendices each fiscal year. More information about the release schedule can be found on our website: https://www.nasa.gov/sbir_sttr/ | - | Pre-Solicitation | 09/30/2027 |
SPECIAL NOTICE: VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT. NASA/NSSC has a requirement for Support design and structural analysis for Hiwrap, MBARS, CRS and COSSIR instruments on the NASA WB57 aircraft. NASA/NSSC intends to issue a sole source contract to WELCH MECHANICAL DESIGNS, LLC 1200 Technology DR Suite N Aberdeen, Maryland 21001-1124 United States under the authority of FAR 12.102(a). It has been determined that WELCH MECHANICAL DESIGNS, LLC is the sole provider of Support design and structural analysis for Hiwrap, MBARS, CRS and COSSIR instruments on the NASA WB57 aircraft. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Goddard Space Flight Center (GSFC). The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial The NAICS Code for this procurement is 541715. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 12:00 p.m. Central Standard Time on 11/9/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements. NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf . Primary Point of Contact: (Note from Tiffany on Teams: When posting on SAM.GOV make sure you are adding the Contracting Officer as an alternate point of contact. ****REMOVE THIS SENTENCE PRIOR TO POSTING**** | - | Special Notice | 11/09/2026 |
** THIS IS A SOLE SOURCE REQUIREMENT ** for URGENT-BP-1 Lunar Regolith simulant Compressibility Testing | - | Special Notice | 11/04/2026 |
SPECIAL NOTICE: VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT. NASA/NSSC has a requirement for Integration and flight support for EXoplanet Climate Infrared TElescope (EXCITE) Balloon Mission Gondola System science flight. NASA/NSSC intends to issue a sole source contract to STARSPEC TECHNOLOGIES INC 402 Harmony Road Units 8-11 Ayr, Ontario N0B 1E0 Canada under the authority of FAR 12.102(a). It has been determined that STARSPEC TECHNOLOGIES INC is the sole provider of Integration and flight support for EXoplanet Climate Infrared TElescope (EXCITE) Balloon Mission Gondola System science flight. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Goddard Space Flight Center (GSFC). The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial The NAICS Code for this procurement is 541715. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 12:00 p.m. Central Standard Time on 11/2/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements. NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf . Primary Point of Contact: Laura Quave Procurement Specialist II laura.a.quave@nasa.gov | - | Special Notice | 11/02/2026 |
SPECIAL NOTICE: VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT. NASA/NSSC has a requirement for Assessment of Residual Stress in Ultrasonically Welded Single Lap Shear Coupons as a function of material crystallinity. NASA/NSSC intends to issue a sole source contract to RTX CORPORATION 411 Silver LN East Hartford, Connecticut 06118-1127 United States under the authority of FAR 12.102(a). It has been determined that RTX CORPORATION is the sole provider of Assessment of Residual Stress in Ultrasonically Welded Single Lap Shear Coupons as a function of material crystallinity. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Glenn Research Center (GRC). The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial. The NAICS Code for this procurement is 541715. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 4:00 p.m. Central Standard Time on 10/30/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements. NAS FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf . Primary Point of Contact: Laura Quave Procurement Specialist II laura.a.quave@nasa.gov | - | Special Notice | 10/30/2026 |
Additional Details
Solicitation Number
80NSSC22811275Q
Archive Date
Not specified
Office Address
STENNIS SPACE CENTER, MS, 39529