GovChime
Notice ID: 8f294475f5ea4b179662fcc3c67de0a8Combined Synopsis/Solicitation

Above Ground storage tank for use at GRC-ATF

Archived on October 14, 2022. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−05:00
Posted
September 28, 2022
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
238910: Site Preparation Contractors
Agency
National Aeronautics and Space Administration

Notice details

Office
NASA SHARED SERVICES CENTER
Last updated
Dec 4, 2025

Identifiers

Solicitation number
80NSSC22816886Q
Notice ID
8f294475f5ea4b179662fcc3c67de0a8

Description

NASA/NSSC has a requirement for Above Ground storage tank for use at GRC-ATF. This a Brand Name or Equal To requirement. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Glenn Research Center (GRC). This notice is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-06. The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13. This is a Request for Quotations (RFQ), 80NSSC22816886Q. Additional details are included in the attached RFQ file. The attached RFQ file is hereby incorporated into this solicitation. Delivery is FOB Destination. This Procurement is Set Aside for Small Business The NAICS Code for this procurement is 238910 All responsible sources may submit a quote which shall be considered by the agency. However, any award from this RFQ shall require the potential vendor to be certified within the System for Award Management System (SAM) and completion of Reps and Certs in the SAM system prior to award at www.sam.gov. Quotes for the item(s) described in the RFQ are due by 9/29/2022 by 12:00 p.m. CT to Susan Hicks at susan.r.hicks@nasa.gov in order to be considered for award. If it is in the best interest of the Government, quotes submitted after the due date may be accepted. If the end product offered is other than a domestic end product as defined in the clause entitled "Buy American Act -- Supplies," the offeror shall so state and shall list the country of origin. All contractual and technical questions must be in writing (e-mail) to Susan Hicks at susan.r.hicks@nasa.gov no later than 9/28/2022 by 12:00 p.m. CT. Telephone questions shall not be accepted. The following clauses and provisions are applicable to this combined synopsis/solicitation: 52.212-1, Instructions to Offerors; 52.212-3 Offeror Representations and Certifications Commercial Items; 52.212-4 Contract Terms and Conditions Commercial Items; 52-212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html . The FAR may be obtained via the Internet at URL: http://www.acquisition.gov/far/index.html The NFS may be obtained via the Internet at URL: http://www.hq.nasa.gov/office/procurement/regs/nfstoc.html Offerors must include completed copies of the provision at 52.212.3 Offeror Representations and Certifications-Commercial Items with their offer. These representations and certifications will be incorporated by reference in any resultant contract. Contracting Office Address: NASA Shared Services Center, Jerry Hlass Rd. Stennis Space Center, MS 39529

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:80NSSC22816886Q
  1. Combined Synopsis
  1. 3×
    Combined SynopsisCurrentSep 23, 2022

    Above Ground storage tank for use at GRC-ATF

    Notice 8f294475f5ea4b179662fcc3c67de0a8 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Login at https://piee.eb.mil and search for 'W90VN726RA009' to obtain more details.*
42%
Combined Synopsis03/09/2026
/// AMENDMENT 3:The purpose of this amendment is to add Attachment 5 Pre-Demolition Survey and add the following verbiage to PWS Paragraph 5.1: Attachment 5 Pre-Demolition Survey is the ACM conducted in 2011 which indicated possible Asbestos in the building. Two additional asbestos surveys were later conducted finding no record of asbestos in the building. Per Fort Drum environmental engineers, this meets NYS Code Rule 56 and no additional pre-demolition surveys are required. All other terms and conditions remain the same. END AMENDMENT 3. /// ///AMENDMENT 2: The purpose of this amendment is to post the Questions and Answers and extend the quote due date from 31 July 2026 to 07 August 2026 at 10:00 AM Eastern time. Attachment 1 Performance Work Statement is updated adding paragraphs 5.2.1.14 and 5.2.4. Attachment 3 500 Area Drawings is updated to include a slide showing the area required to be fenced. Attachment 4 Test Results is added providing the results of the environmental testing of the site. All other terms and conditions remain the same. END AMENDMENT 2///AMENDMENT 1: The purpose of this amendment is to add Attachment 3 500 Area Drawings. All other terms and conditions remain the same. END AMENDMENT 1/// Fort Drum, New York has a requirement for WWII Building Demolition. This requirement is set-aside 100% small business set aside under NAICS 238910 Site Preparation Contractors, size standard is $19 million. A site visit will be conducted on 23 July, 2026 at 1:00 PM Eastern time. The meeting place will be held in Conference Room 103, located at 4205 Po Valley Rd, Fort Drum, NY 13602. To access Fort Drum, contractors shall be restricted to physically sign in at Paul Cerjan Gate for entry, unless they have a Department of Defense (DoD) issued ID card, a local temporary pass, or a local access badge (LAB). For contractors who do not have access will need to visit the welcome center Bldg. 11008 outside of Paul Cerjan (Main) gate with a picture identification (must be Real ID compliant), registration, and proof of insurance to gain a one-day pass. The visitor center is open 5:30 a.m. to 10:00 p.m. seven days a week. Offerors MUST notify the Contracting Officer and Contract Specialist by email of intent to attend the site visit no later than 23 July, 2026 at 10:00 AM Eastern Time. Questions are due no later than 27 July, 2026, at 10:00 AM Eastern time. Quotes are due on 31 July, 2026 at 11:00 AM Eastern Time. The Offeror shall provide all information and requirements listed in Addendum to FAR 52.212-1 on page 22 of this solicitation. All quotes shall be submitted electronically via the PIEE Solicitation Module. Quoters shall nominate a Proposal Manager in the PIEE Solicitation Module. The Proposal Manager shall respond and post quotes to this solicitation in the PIEE Solicitation Module. For information and training on how to add the role to the quoter?s profile, the functions of the Proposal Manager, and how to post an offer/bid/quote, go to https://piee.eb.mil/. Log on to PIEE; select Help; select New User Information and Help; select Web Base Training.
42%
Solicitation08/07/2026
40%
AwardedOpen
Description The United Stated Embassy in Kingston is requesting proposals for Trenching, Conduit And Ground-Well Installation in various locations on the Embassy compound. The contractor will provide all labor, equipment, supervision, material specific to the back filling and compaction and management needed to complete the job Infrastructure Support System - Handhole / Underground Conduit System Trenching Nine locations have been identified requiring trench work. Thirteen locations have been identified requiring trench work. Before excavation, the Contractor shall locate and verify all existing utilities in the proposed trench alignment. If excavation interferes with existing drains, piping, or structures, the Contractor shall immediately notify, in writing, the COR and provide temporary protection for these systems before proceeding. Trenching from Handholes The Contractor shall make wall penetrations into existing manholes/handholes as required for the number and size of conduits entering and exiting each structure, in accordance with the drawings. Conduit Existing conduit shall remain in place unless the drawings specifically direct removal or modification. Under grass, soil, the Contractor shall install Schedule 80 PVC conduit with a minimum cover of 24 inches (610 mm) from finished grade to top of conduit, or as indicated on the drawings, whichever is greater. All underground 90 degree bends with a 12inch (305 mm) radius shall use prefabricated sweeping bends. Above grade, all underground PVC conduit shall transition to rigid galvanized steel (RGS) using PVC to RGS couplers. The Contractor shall install pull lines in all new conduit runs. Soil and Backfill Materials Soil Materials The Contractor shall provide all labor and materials for soil and backfill, where required. Select Backfill: ASTM D 2487 soil classification groups SW, SP, and SM, or combinations thereof; free of rock or gravel larger than 3 inches (75 mm), debris, waste, frozen materials, vegetation, and other deleterious matter. Asphalt/Concrete Base Course: Naturally or artificially graded mixture of natural or crushed gravel, crushed stone, and natural or crushed sand; ASTM D 2940; with at least 95% passing a 11/2inch (40 mm) sieve and not more than 8% passing a 1/4inch (6.4 mm) sieve. Base Gravel: Naturally or artificially graded mixture of natural or crushed gravel, crushed stone, and natural or crushed sand; ASTM D 2940; 100% passing a 1inch (25 mm) sieve and not more than 8% passing a 1/4inch (6.4 mm) sieve. Sand Cushion: ASTM C 33 fine aggregate, natural or manufactured sand. Placement and Compaction Place backfill and fill in layers not exceeding: 8 inches (203 mm) loose thickness for heavy compaction equipment; 4 inches (102 mm) loose thickness when compacted by hand-operated tampers. Place backfill and fill evenly to the required elevations, uniformly along their full length. Compact soil materials to not less than the following percentages of maximum dry unit weight per ASTM D 1557: Under lawns or unpaved areas: scarify and re-compact top 6 inches (152 mm) below subgrade and compact each layer to 85%. Utility trenches: compact each layer of initial and final backfill to 85%. Anticipated Period of Performance: a base period of twenty-one (21) days after contract award Eligibility and Registration Offerors must hold an active registration in the System for Award Management (SAM.gov) when they submit a proposal and at award. Local Insurance and Defense Based Act (DBA) Insurance. A site visit has been scheduled for Friday, November 06, 2026 at 10 a.m. Offeror interested in attending must email kingstonquotes@state.gov with the caption ‘TRENCHING - SITE VISIT’. To ensure access you are required to be approved prior to the visit. You are to provide the full names of the attendees, the vehicle information to include make, model, color and plate number of the vehicle being driven. The email must be sent no later than Wednesday, November 04, 2026 by 2 pm. Completed proposal are to be email to kingstonquotes@state.gov in PDF format by the deadline stipulated.
39%
Solicitation11/25/2026
The Department of War Education Activity (DoWEA) is one of only two federally operated school systems in the United States. DoWEA plans, directs, coordinates, and manages pre-kindergarten through grade 12 educational programs on behalf of the Department of War (DoW). DoWEA operates approximately 165 brick-and-mortar schools across eight districts located in seven U.S. states, eleven foreign countries, Guam, and Puerto Rico, serving more than 72,000 students worldwide. DoWEA Europe consists of multiple districts encompassing schools, District Superintendent Offices (DSOs), and Student Transportation Offices (STOs) supporting children of active-duty military members and eligible civilian employees. The Contractor shall provide full-service, performance-based playground inspection, preventive maintenance, repair, emergency response, cleaning services for DoWEA facilities located in Europe South Region. For the purposes of this PWS, playgrounds include all playground systems and associated features, whether standalone or co-located, including but not limited to: Playground equipment and structures; Playground surfacing systems; Hard-surface and multi-use play courts; Outdoor recreational and athletic surfaces; and, Perimeter features, furnishings, and appurtenances. The Contractor shall furnish all management, supervision, labor, tools, equipment, materials, transportation, documentation, and incidentals necessary to ensure playgrounds remain safe, serviceable, compliant, and operational throughout the period of performance.
38%
Combined Synopsis11/09/2026

Additional Details

Solicitation Number

80NSSC22816886Q

Archive Date

Oct 14, 2022

Office Address

STENNIS SPACE CENTER, MS, 39529