Notice ID: f0cfbb4be52f47789dbcc56755140e58Special Notice
ES-MCAT Dome Repair and Maintenance Services
Archived on June 29, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 1:00 PM UTC−05:00
- Posted
- June 12, 2023
- Notice type
- Special Notice
- NAICS
- 332311: Prefabricated Metal Building and Component Manufacturing
- Agency
- National Aeronautics and Space Administration
Notice details
- Office
- NASA SHARED SERVICES CENTER
- Place of performance
- Houston, TX, 77058
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- 80NSSC23838357Q
- Notice ID
- f0cfbb4be52f47789dbcc56755140e58
Description
ES-MCAT Dome Repair and Maintenance Services
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
Solicitation:
80NSSC23838357Q- Special NoticeCurrentJun 12, 2023
ES-MCAT Dome Repair and Maintenance Services
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
1. Purpose The Federal Aviation Administration (FAA) is conducting a market survey to identify qualified, capable industry sources for the manufacturing and delivery of modular, transportable building units or shipping containers to Key West, Florida. This announcement serves to assess vendor capability, determine commercial availability, and gather industry feedback on alternative project delivery and contracting strategies. The findings will assist the FAA in developing its acquisition strategy and procurement planning in accordance with FAA AMS § 3.2.1.2.1. 2. General Project Description & Scope of Work The baseline requirement comprises an estimated ten (10) structural units (shipping containers or modular building units) meeting the following preliminary specifications: Dimensions & Configuration: Assembled footprint of approximately 30 ft (W) × 48 ft (L), with a minimum interior clear ceiling height of 8 ft. Components must be engineered for highway transit, crane rigging/lifting, and rapid on-site assembly. Structural Integrity: Robust structural construction designed to withstand repeated transport, rigging, crane operations, and installation at the project site. Thermal Envelope: Fully insulated exterior walls and roof system achieving an approximate thermal resistance rating of R-28. Identification & Sequencing: Clear, weather-resistant exterior markings to facilitate accurate component identification, planned erection sequencing, and future disassembly/relocation. Modularization & Mobility: 100% modular and fully relocatable. The baseline 10-module configuration was developed to reduce road-permitting constraints; however, the FAA invites alternative modularization concepts (fewer or more modules) if they demonstrate clear efficiencies in freight transit, site assembly, or future relocation. Commercial modular alternatives or standard ISO shipping containers are encouraged. Regulatory Compliance: Full compliance with the Buy American Act (BAA). All proposed equipment, assemblies, and primary components must satisfy domestic manufacturing and sourcing criteria. Place of Delivery: Key West, Florida. Delivery Schedule: Target Delivery Date: February 1, 2027 Mandatory Delivery Completion: February 28, 2027 (dates remain subject to negotiation) 3. Submission of Capability Statements Interested vendors are requested to provide a preliminary Capability Statement addressing the following areas: Technical Capability: Confirmation of ability to satisfy or exceed the structural, dimensional, and thermal requirements, including technical overviews of any proposed modular alternatives. Buy American Act Compliance: Demonstration of domestic sourcing and manufacturing pathways compliant with BAA requirements. Schedule & Capacity: Current manufacturing lead times, production capacity, and feasibility of meeting the February 2027 delivery milestone. Budgetary Estimates: Preliminary Rough Order of Magnitude (ROM) pricing. Vendor Information: Company legal name, primary point of contact (name, phone, email), SAM.gov Unique Entity Identifier (UEI), CAGE Code, and business size/socioeconomic status under the applicable NAICS code(s). Submission Instructions: All responses must be received no later than Thursday, November 19, 2026, at 5:00 p.m. Eastern Time to Susan.Newcomb@faa.gov and Robert.Higgins@faa.gov. Please include the project title (Modular, Transportable Building Units or Shipping Containers – Key West, FL) in the subject line of your submission. 4. Disclaimer This market survey is issued for informational, market research, and acquisition planning purposes. It does not constitute a Screening Information Request (SIR), Request for Proposals (RFP), or formal solicitation. The FAA is neither requesting nor accepting unsolicited proposals under this notice. The Government assumes no financial liability for any costs incurred by respondents in preparing, submitting, or following up on responses to this announcement. All submissions become the property of the FAA and will not be returned. Information obtained through this market survey may be utilized in future procurement activities supporting the Brand-New Air Traffic Control Initiative—a long-term infrastructure modernization effort to update the National Airspace System (NAS), including critical upgrades to Air Traffic Control Towers (ATCT) and Terminal Radar Approach Control (TRACON) facilities. | - | Market Research | 11/19/2026 |
THIS IS A SOURCES SOUGHT NOTICE ISSUED FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A SOLICITATION, REQUEST FOR QUOTATION (RFQ), OR REQUEST FOR PROPOSAL (RFP). The Government is conducting market research to identify qualified sources capable of providing support in Veracruz, Panama. The purpose of this notice is to identify capable sources, assess industry capability and availability, and obtain industry feedback regarding the anticipated requirement. This notice is issued solely for market research purposes and to provide industry with advance notice of a potential upcoming solicitation. A solicitation has not been issued at this time. Description: Requesting a rough order of magnitude (ROM) for estimated pricing, and capability plan, to support the purchasing and transport of materials / supplies at Veracruz, Panama to construct a 11M x 15M x 5.5M pre-engineered building with roof panels. The materials / supplies are to be delivered on site to an elementary school in Escuela Cosecha Amistad, Veracruz, Panama by March 2027. Need the interior of the canopy to be clear space so the kids can play soccer / basketball. Request for Deliverables: Vendors submit a Technical Capability Statement illustrating their ability to purchase and deliver pre-fabricated building supplies across Panama Provide a general Rough Order of Magnitude (ROM) outlining estimated costs for the purchase and delivery of the pre-fabricated building supplies at .Escuela Cosecha Amistad, Veracruz, Panama. If you can support this request, please submit the deliverables mentioned above by 09 Novembet 2026 by 12:00PM CST. Please email information to MAJ Vernon Shank at vernon.d.shank.mil@army.mil. Thank you for the support. | - | Market Research | 11/09/2026 |
SUBJECT: GOVERNMENT OWNED, PRE-ENGINEERED STEEL BUILDING ERECTION, GRANGER LAKE, TEXAS. PROPOSED SOLICITATION NUMBER: W9126G26QA113; POSTED ON OR ABOUT 20 AUGUST 2026. SOLICITATION CLOSING DATE: 10 SEPTEMBER 2026. DESCRIPTION: The contractor shall furnish all tools, equipment, labor, and supervision to erect a Government furnished pre-engineered steel building as shown in Statement of Work (SOW) Attachment 2 and in accordance with SOW Section 13 34 19 METAL BUILDING SYSTEMS. Materials required for the complete erection of the pre-engineered steel building not listed in SOW Attachment 1 shall be furnished by the Contractor and submitted to the COR for approval. Prior to erection, Contractor shall examine the concrete foundation and masonry bearing surfaces, anchor bolt size and placement, survey slab elevation, locations of bearing plates, and other embedments to receive structural framing with the metal building manufacturers templates and drawings as detailed in the SOW before erecting any steel components for compliance with requirements for installation tolerances and other conditions affecting performance of the Work. Erect metal building system according to manufacturers written erection instructions, approved shop drawings and other erection documents in accordance with MBMA MBSM - Metal Building Systems Manual. Contractor shall perform all work in accordance with the SOW and the terms of the contract. | - | Pre-Solicitation | Open |
DESCRIPTION: This is a Source Sought Notice Only- The Aerospace Maintenance and Regeneration Group (AMARG), Davis-Monthan AFB, AZ, requires a Large Component Blast Booth. This requirement is not currently anticipated to be solicited on a small business set-aside basis. However, a set aside will be contemplated, provided 2 or more qualified small business respond to this sources sought synopsis with information sufficient to support a set-aside. Be advised that the U.S. Government will not be able to set aside this requirement if 2 or more small businesses do not respond with information to support the set-aside. We encourage all small businesses, in all socioeconomic categories (including, 8(a) Business Development Program, Small Disadvantage Business, Historically Underutilized Business Zone, Service-Disabled Veteran-Owned, Women- Owned Small Business concerns), to identify their capabilities in meeting the requirement at a fair market price. This notice is issued solely for information and planning purposes - it does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFB)/Request for Proposal (RFP) or a promise to issue an RFQ, IFB or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids or proposals at this time and will not accept unsolicited proposals in response to this sources sought notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFQ or IFB or RFP, if any is issued. If a solicitation is released, it will be synopsized on the Government wide Point of Entry. It is the responsibility of potential offers to monitor the Government wide Point of Entry for additional information pertaining to this requirement. The anticipated NAICS code is: 332311 Prefabricated Metal Building and Component Manufacturing. Size Standard: 750 Employees. The objective of this effort is to purchase a complete and Turn-Key design, construction, and installation of a new corrosion control facility at the 309th Aerospace Maintenance and Regeneration Group (AMARG), located within a controlled area of Davis-Monthan Air Force Base (DMAFB), Arizona. The primary function is the corrosion control of Aerospace Ground Equipment (AGE) and other ferrous related items. The media blast booth will be housed within a fully enclosed Pre-Engineered Metal Building (PEMB) that also provides a separated maintenance support operations area (MX Ops Area). The entire facility shall be constructed on a currently unimproved site located North of Building 7213 (the Small Paint Booth). The performing contractor is responsible for providing all management, professional services, labor, materials, and equipment to deliver a fully functional and operational facility. INDUSTRY DAY: The Air Force is hosting an Industry Day on 8 December 2026 at Davis-Montham AFB and AMARG. Interested vendors must request access and event details by contacting Christian Cross or Brent Perry. All access requests and registration details must be submitted no later than the RSVP deadline on 1 December 2026. (Please see INSTRUCTION 9 for POC information.) INSTRUCTION: In response to this Sources Sought, please provide: 1. Name of the firm, point of contact, phone number, email address, DUNS number, CAGE code, a statement regarding small business status (including small business type(s)/certifications(s) such as SDB, 8 (a), HUBZone, SDVOSB, WOSB, etc.) and the corresponding NAICS code. 2. Identify whether your firm is interested in competing for this requirement as a prime contractor or not. Identify subcontracting, joint ventures or teaming arrangement that will be pursued, if any. 3. Information in sufficient detail regarding previous experience (indicate whether as a prime contractor or subcontractor) on similar requirements whether as a prime contractor or subcontractor) on similar requirements (include size, scope, complexity, timeframe, government or commercial), pertinent certifications, etc., that will facilitate making a capability determination. 4. Information to help determine if the requirement is commercially available, including pricing information, basis for the pricing information (e.g., market pricing, catalog pricing), delivery schedules, customary terms and conditions, warranties, etc. 5. Identify how the USAF can best structure these contract requirements to facilitate competition by and among small business concerns. 6. Identify any condition or action that may be having the effect of unnecessarily restricting competition with respect to this acquisition. 7. Recommendations to improve the approach/specifications/drawings/PWS/PRS to acquiring the identified items. 8. Please include the number FA8227-27-SS-AMARGLCBB in your email response to preclude your reply being treated as JUNK or SPAM. 9. Questions regarding the market survey and/or industry day should be addressed to both Mr. Christian Cross by email christian.cross@us.af.mil and Mr. Brent Perry by email brent.perry.2@us.af.mil. Attachments: – DRAFT 309 AMARG LCBB SOW (09NOV26) | - | Market Research | 12/18/2026 |
Prefabricated steel sheds with Installation Labor Solicitation | - | Combined Synopsis | 11/16/2026 |
Additional Details
Solicitation Number
80NSSC23838357Q
Archive Date
Jun 29, 2023
Office Address
STENNIS SPACE CENTER, MS, 39529