GovChime
Notice ID: 83950577f1494f419b6546b0b7020a0aSpecial Notice

Massive Dimension Extruder and Accessories

Archived on June 22, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:00 PM UTC−05:00
Posted
June 4, 2024
Notice type
Special Notice
NAICS
326199: All Other Plastics Product Manufacturing
Agency
National Aeronautics and Space Administration

Notice details

Office
NASA SHARED SERVICES CENTER
Last updated
Dec 4, 2025

Identifiers

Solicitation number
80NSSC24871638Q
Notice ID
83950577f1494f419b6546b0b7020a0a

Description

Synopsis: NASA/NSSC has a requirement for Massive Dimension Extruder and Accessories. NASA/NSSC intends to issue a sole source contract to TRIEX LLC 81 Parker RD Barre, Vermont 05641-9106 United States under the authority of FAR 13.106-1(b)(1)(i). It has been determined that TRIEX LLC is the sole provider of Massive Dimension Extruder and Accessories. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC). The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13. The NAICS Code for this procurement is 326199. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 3:00 p.m. Central Standard Time on 6/7/2024. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html . Primary Point of Contact: McKenzie Hanson Procurment Specialist McKenzie.M.Hanson@nasa.gov

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:80NSSC24871638Q
  1. Special NoticeCurrentJun 4, 2024

    Massive Dimension Extruder and Accessories

    Notice 83950577f1494f419b6546b0b7020a0a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
SOURCES SOUGHT: THIS IS NOT A NOTICE OF REQUEST FOR QUOTATION. THIS IS FOR INFORMATION AND PLANNING PURPOSES ONLY! This notice does not constitute a commitment by the Government. All information submitted in response to this announcement is voluntary and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. The Department of Defense, United States Air Force (USAF), Air Force Materiel Command (AFMC), Air Force Test Center (AFTC), Operational Contracting Division (PZIOCD), is currently conducting market research seeking capabilities statements from potential sources, including small businesses (SB), 8(a), HUBZone, Economically Disadvantaged Woman-Owned (EDWOSB), Woman-Owned (WOSB), Service Disabled Veteran Owned (SDVOSB) small business that are capable of providing Traffic Safety Cones in support of the upcoming base Airshow at Eglin AFB, FL. SCOPE. The Contractor shall supply and deliver brand new, free-standing traffic safety cones to Eglin Air Force Base (AFB). All items must meet the following technical specifications and salient characteristics: Item Description: 28" Free-Standing Traffic Safety Cone, 7 lbs., Safety Orange, equipped with 6" and 4" High-Intensity Reflective Collars (Type IV). Quantity Required: 2,000 units Compliance: Cones must meet the Federal Highway Administration Manual on Uniform Traffic Control Devices (MUTCD) safety standards. Delivery Destination: Eglin AFB, FL 32542. Responses to this Sources Sought request should reference "Traffic Safety Cones - EGLIN AFB, FL" and shall include the following information in this format: Company name, address, point of contact, phone number, and email address. Unique Entity ID (UEI), Contractor and Government Entity (CAGE) Code, GSA contract number, if applicable. Size of business in relation to the NAICS code listed below. Capability statement displaying the contractor's ability to provide the products, to include any relevant past performance on supplying similar safety or traffic maintenance commodities in bulk within the last 5 years. Please include contract numbers, dollar value, and period of performance for each contract referenced. The Government also requests input from industry on areas of improvement for the Statement of Need (SON) or any part of this requirement. Any feedback will be reviewed and may or may not be incorporated. All interested vendors should submit a response demonstrating their capability to provide these products to the Primary Points of Contact listed below. Proposals/Quotes/Bids are not being requested or accepted at this time. Your responses to the information requested will assist the Government in determining the appropriate acquisition method, including whether a small business set-aside is possible. As stipulated in RFO 15.101(c), responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. No solicitation exists at this time; therefore, do not request a copy of the solicitation. The decision to solicit for a contract shall be solely within the Government’s discretion. This notice is issued solely for information and planning purposes; it does not constitute a Request for Quote (RFQ)/Invitation for Bid (IFB)/Request for Proposal (RFP) or a promise to issue an RFQ, IFB, or RFP in the future. This notice does not commit the U.S. Government to contract for any supply or service. Further, the U.S. Government is not seeking quotes, bids, or proposals at this time and will not accept unsolicited proposals in response to this sources sought notice. The U.S. Government will not pay for any information or administrative costs incurred in response to this notice. Submittals will not be returned to the responder. Not responding to this notice does not preclude participation in any future RFQ or IFB or RFP, if any is issued. If a solicitation is released, it will be synopsized on the Government-wide Point of Entry (SAM.gov). It is the responsibility of potential offerors to monitor the Government-wide Point of Entry for additional information pertaining to this requirement. The NAICS code assigned to this acquisition is 326199 (All Other Plastics Product Manufacturing), with a size standard of 1,000 employees. Respondents should indicate their size in relation to these size standards and indicate socio-economic status (i.e. SB, 8(a), HUBZone, EDWOSB, WOSB, or SDVOSB). Respondents are further requested to indicate their status as a Foreign-owned/Foreign-controlled firm and any contemplated use of foreign national employees on this effort. The Government reserves the right to consider a small business set-aside based upon responses hereto for any subsequent action. No set-aside decision has been made. Any information submitted by respondents to this sources sought is voluntary. This sources sought notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice. Respondents will not be individually notified of the results of any government assessments. The Government’s assessment of the capability statements received may factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small business, or any particular small business program. Small businesses with only partial capabilities of this requirement are encouraged to submit their capabilities statement demonstrating the portion of the requirement they are capable of providing. This information will allow the Government to identify areas of possible breakout or possible subcontracting opportunities. CAPABILITIES STATEMENT: All interested vendors should submit a capabilities statement that explicitly demonstrates their capability to provide the products stated in this notice. The capabilities statement should be brief and concise yet clearly demonstrate an ability to meet the stated requirement. The response must not exceed 5 pages. Responses must be submitted electronically to the following e-mail addresses: romina.snyder.2@us.af.mil and hailey.prather@us.af.mil. All correspondence sent via email should contain a subject line that reads “Response to Eglin AFB Traffic Safety Cones Sources Sought.” If this subject line is not included, the e-mail may not get through e-mail filters at Eglin AFB. Filters are designed to delete emails without a subject or with a suspicious subject or attachment. Attachments with files ending in .zip or .exe are not allowable and will be deleted. Ensure only .pdf, .doc, or .docx documents are attached to your email. All other attachment types may be deleted. All responsible sources may submit information that will be considered by the agency. If late information is received, it may be considered, depending on agency time constraints. All routine communication regarding the announcement should be directed to the contractual points of contact listed in this posting. The Government may or may not use any responses to this sources sought as a basis for a subsequent project/requirement. Any project/requirement developed from the sources sought responses may be the subject of a subsequent acquisition; any such subsequent acquisition will be posted on SAM.gov separately. Responses to this sources sought will not be returned. The Government is under no obligation to acknowledge receipt of the information received or provide feedback to the respondents with respect to any of the information submitted under this sources sought. No requests for a bid package or solicitation will be accepted; a bid package or solicitation does not exist at this time. In order to protect the integrity of any possible future acquisition, no additional information will be provided and no appointments for presentations will be made in reference to this sources sought. Only government employees will review submitted responses to this sources sought. Respondents are advised that employees of commercial firms under contract with the Government may be used to administratively process submissions and perform other administrative duties requiring access to other contractor’s proprietary information. These administrative support contractors include nondisclosure agreements prohibiting their contractor employees from disclosing any information submitted by other contractors or using such information for any purpose other than that for which it was furnished. RESPONSES ARE DUE NO LATER THAN 4:00 P.M. (CST) ON NOVEMBER 27, 2026. Direct all questions concerning this requirement to Romina Snyder at romina.snyder.2@us.af.mil and Hailey Prather at hailey.prather@us.af.mil
-Market Research11/27/2026
-AwardedOpen
SOURCES SOUGHT ANNOUNCEMENT Fleet Logistics Center Puget Sound (FLC PS) is posting a Sources Sought notice, as a means of conducting market research to identify any interested vendors for the procurement of Polyethylene/Polyurethane Parts for the USS Chief, in support of SRF-JRMC. The applicable North American Industry Classification System (NAICS) code assigned to this requirement is 326199, with a small business size standard of 750 employees. The results of this market research may contribute to future procurement process decisions. NO feedback or evaluations will be provided regarding any submission against this Sources Sought notice. Please provide responses to this announcement no later than the posted closing date. DESCRIPTION OF REQUESTED SUPPLIES: (QTY 13) YHMW 2.5" THK, UHMW POLYURETHAN, UHMW (ULTRA HIGH MOLECULAR WEIGHT) POLYETHYLENE, SIZE; 2-1/2"THK X 10" WIDTH X 10 FT LG, COLOR; BLACK. (QTY 6) UHMW 2.5" THK, UHMW POLYURETHAN, UHMW (ULTRA HIGH MOLECULAR WEIGHT) POLYETHYLENE, SIZE; 2-1/2"THK X 3' WIDTH X 10 FT LG, COLOR; BLACK. (QTY 4) UHMW 3" THK, POLYETHYLENE, UHMW (ULTRA HIGH MOLECULAR WEIGHT) POLYETHYLENE, SIZE; 3"THK X 3' WIDTH X 10 FT LG, COLOR; BLACK. (QTY 8) UHMW 4" THK, POLYETHYLENE, UHMW (ULTRA HIGH MOLECULAR WEIGHT) POLYETHYLENE, SIZE; 4"THK X 3' WIDTH X 10 FT LG, COLOR; BLACK. (QTY 1500) UHMW PLUGS, TAPERED, UHMW (ULTRA HIGH MOLECULAR WEIGHT) POLYETHYLENE PLUGS (TAPERED), SIZE; 1" DIA X 1/2"T, COLOR; BLACK. All responses to this Sources Sought notice should be emailed to Walid Aslan (walid.m.aslan.civ@us.navy.mil) and include the following information - Your organization name, physical address, CAGE code, email address, website, telephone number, classification (Small Business/Other Than Small) status under NAICS code 326199. **THIS IS NOT A REQUEST FOR QUOTE** - submission of any information in response to this Sources Sought notice is purely voluntary and the Government assumes no financial responsibility for any costs incurred. The results of this market research may contribute to future procurement process decisions. No feedback or evaluations will be provided to responses against this Sources Sought notice.
-Market Research11/16/2026
GENERAL INFORMATION AND STATUTORY AUTHORITY The Supervisor of Shipbuilding, Conversion, and Repair, USN, Bath, ME (SUPSHIP Bath) announces its intent to solicit, negotiate, and award a sole-source, Firm-Fixed-Price (FFP) contract to the University of Maine Orono's Advanced Structures and Composites Center (ASCC), located in Orono, ME. The statutory authority permitting other than full and open competition is 10 U.S.C. 3204(a)(1) (formerly 10 U.S.C. 2304(c)(1)), as implemented by Federal Acquisition Regulation (FAR) 6.302-1, "Only one responsible source and no other supplies or services will satisfy agency requirements." Pursuant to FAR 5.102 and FAR 6.305, the redacted Justification and Approval (J&A) document approved by the Competition Advocate (Code 400) on 4 September 2026 is attached to this special notice. 2. DESCRIPTION OF REQUIREMENT AND SCOPE The Government requires the design, material validation, physical testing, and fabrication of custom-fit, weather-tight, impact-resistant, and flame-retardant temporary protective covers. These specialized covers provide heavy industrial barrier protection for the sensitive, high-value AN/SPY-6(V)1 Air and Missile Defense Radar (AMDR) array faces on designated Flight III Guided-Missile Destroyer (DDG) platforms during active shipyard construction, outfitting, and pier-side integration. The anticipated scope of work comprises: Base Requirement (CLINs 0001 - 0004): Design review and engineering, material formulation and drop validation testing, and additive manufacturing delivery of one (1) initial shipset of four (4) customized temporary protective covers, including complete technical data deliverables under Government Purpose Rights (GPR). Support Services (CLIN 0005): Firm-Fixed-Price post-manufacturing support package consisting of pre-priced engineering hours for shipyard rigging coordination and fit-checks (SLIN 0005AA) and pre-priced field patch and repair material kits (SLIN 0005AB). Option Quantities (CLINs 0006 & 0007): Pre-priced contract options for up to two (2) additional replication shipsets of four (4) covers each (totaling eight (8) option covers) to support subsequent Flight III hull outfitting schedules. The total estimated value across the base requirement and all options is under $2,000,000, funded utilizing SCIB funding. 3. SOLE SOURCE JUSTIFICATION AND CONTRACTOR QUALIFICATIONS Detailed in the attached redacted Justification and Approval. 4. SUBMISSION OF CAPABILITY STATEMENTS THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. A solicitation will not be posted publicly. However, all responsible sources may submit a capability statement, proposal, or quotation which shall be considered by the agency. Interested parties must demonstrate in writing their existing, certified capability to meet the Government's technical and schedule requirements without causing unacceptable delays to ongoing naval construction. Submissions must include: Detailed evidence of an existing, fully operational large-scale additive manufacturing gantry system capable of printing a single-piece or modular thermoplastic enclosure matching the physical envelope of the AN/SPY-6(V)1 radar array foundations. Demonstrated technical capability to compound, print, and certify composite materials. Demonstrated ability to ingest shipbuilder 3D CAD parametric solid models directly into machine-ready additive instructions without requiring external mold tooling, and delivery of initial shipset articles. Company name, CAGE code, Unique Entity Identifier (UEI), business size classification under NAICS 326199, and primary technical point of contact. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement in the future.
-Special Notice12/12/2026
See attached RFQ and SOW and Q&A document
-Solicitation11/11/2026

Additional Details

Solicitation Number

80NSSC24871638Q

Archive Date

Jun 22, 2024

Office Address

STENNIS SPACE CENTER, MS, 39529