GovChime
Notice ID: cce0e25950d74cde8c97e7b7935e0a60Special Notice

Blue Origin Chapter 8 MMDB PRA

Archived on June 28, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM UTC−05:00
Posted
June 10, 2024
Notice type
Special Notice
NAICS
561210: Facilities Support Services
Agency
National Aeronautics and Space Administration

Notice details

Office
NASA SHARED SERVICES CENTER
Last updated
Sep 9, 2025

Identifiers

Solicitation number
80NSSC24872209Q
Notice ID
cce0e25950d74cde8c97e7b7935e0a60

Description

Synopsis: NASA/NSSC has a requirement for Blue Origin Chapter 8 MMDB PRA. NASA/NSSC intends to issue a sole source contract to ASCA, INC 1720 S Catalina AVE # 220 Redondo Beach, California 90277-5504 United States under the authority of FAR 13.106-1(b)(1)(i). It has been determined that ASCA, INC is the sole provider of Blue Origin Chapter 8 MMDB PRA. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Kennedy Space Center (KSC). The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13. The NAICS Code for this procurement is 561210 Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 12 p.m. Central Standard Time on 6/13/2024. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html .

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:80NSSC24872209Q
  1. Special NoticeCurrentJun 10, 2024

    Blue Origin Chapter 8 MMDB PRA

    Notice cce0e25950d74cde8c97e7b7935e0a60 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
***Amendment 0004*** This amendment serves to extend the due date to Monday, November 02, 2026. No other changes will be made. All terms and conditions remain the same. ***Amendment 0003*** This amendment serves to change and remove language in the scope of work. Please see the changes to the scope of work, Section B, and Attachments 1, as well as the bid schedule for the Parent IDIQ and the Seed Task Order. No other changes have been made. The solicitation closing date is hereby extended through 30 October 2026. All terms and conditions remain the same. ***Amendment 0002*** Amendment 0002 serves to change and remove language in the scope of work and attachments. Please see the changes to the scope of work, Sections E, F, G, L, and M, Attachments 1, 2, and 3, as well as the bid schedule for the Parent IDIQ and the Seed Task Order. The proposal due date is hereby extended to 23 October 2026. ***Amendment 0001*** Amendment 0001 has been posted to provide the site visit sign in sheet, and both power point presentations shown at the site visit. This amendment also extends the solicitation due date to 14 October 2026. ***Notice*** The site visit will be held on Tuesday, September 15, 2026, beginning at 0900 hrs. Address of site visit is Lake Ouachita Field Office, 1424 Blakely Dam Rd, Royal AR 71968. This is a 100% total small business set-aside procurement issued under NAICS code 561210, Facilities Support Services by the U.S. Army Corps of Engineers, Vicksburg District (MVK). The U.S. Army Corps of Engineers (USACE) Vicksburg District (MVK) has the continued responsibility for the operation and maintenance (O&M) of the Arkansas Lakes Flood Control Projects at DeGray Lake, Lake Ouachita, and Lake Greeson located in the state of Arkansas. A broad variety of operations, routine and non-routine maintenance, repair including emergency repairs, inspection, reconstruction, modernization, and rehabilitation of project facilities, water control structures, and features are required under this procurement. These include Recreation Area and Facility Cleaning; Solid Waste Collection, Transport, and Disposal; Heavy Equipment Maintenance/Repairs; Visitor Center Operations and Maintenance; Carpentry; Erosion Control Activities; Buoy Placement and Maintenance; Painting; Heating/Air Conditioning Services; Masonry Repair; Landscaping; Wildlife and Fisheries Enhancement; Flood Control Structure Repairs and Maintenance; and Road Maintenance/Repairs. The Government intends to award an Indefinite Delivery, Indefinite Quantity (IDIQ) contract with a base ordering period with four options and a 6-month ordering period.
-Solicitation11/02/2026
SF 30 CONTINUATION SHEET AMENDMENT 0002 Solicitation No.: 36C25627Q0022 Project: B170 Courtyard Window Re Caulk CAVHS Purpose of Amendment The purpose of this amendment is to provide the Government s responses to vendor questions submitted prior to the deadline. The following Questions & Answers are hereby incorporated into the solicitation. These clarifications do not change the scope of work unless explicitly stated. Only the Contracting Officer may authorize changes per FAR 52.212 4(c). SECTION: QUESTIONS & ANSWERS General Administrative Items Q1. Will the Government confirm that offers should be submitted via email to andrew.misfeldt@va.gov? A1. Yes. Submit one consolidated PDF ( 10MB), font Arial 11, in accordance with the solicitation instructions. Q2. Are there page limitations? A2. No page limits apply. The file-size limit of 10MB governs. Q3. Which form must be submitted SF 1449 or SF 1442? A3. Offerors shall submit a signed SF 1449. SF 1442 is not required. Evaluation Factors Q4. Please confirm the evaluation factors. A4. Evaluation consists of: Factor I Approach & Quality Management Factor II Professional Qualifications & Specialized Experience Factor III Past Performance Factor IV Price Factors I III are equal in importance and collectively approximately equal to Price. Q5. Does managing one subcontractor satisfy Past Performance requirements? A5. Yes, provided the offeror served as the prime contractor. Site Visit, Access, & Logistics Q6. Will there be a site visit? A6. A site visit was held on October 14, 2026. No additional site visits will be conducted. Q7. Please confirm logistical restrictions. A7. Approximate curtainwall height is 50 ft (verify independently). Elevator weight limit is 4,000 lbs. Courtyard door widths are 36 58 . Quiet hours are 2 3 PM and 10 PM 5 AM. Coordinate courtyard occupation with nursing staff. Q8. Are badges required? A8. Not for courtyard work during business hours. Badges are required for roof access. Delays caused by incomplete contractor submissions are not excusable delays. Scope Clarifications Q9. Does work occur along the entire curtainwall or only at leak locations? A9. Work shall occur along the entire curtainwall interface within Courtyards 1B and 1C to provide a continuous and complete seal. Q10. Should the entire length be repaired for a uniform seal? A10. Yes. Q11. Are cover caps replaced everywhere? A11. No. Replace only caps that are missing or cannot be reattached. Q12. Are other courtyard walls included? A12. No. Only the curtainwall/TPO/wall interface is included unless otherwise directed by the CO. Q13. Will the Government provide as builts or record drawings? A13. No. They are not available. Q14. Will the Government provide quantities? A14. No. Offerors must determine all quantities during the site visit. These measurements are binding for proposal purposes. Q15. Is full perimeter window caulking included? A15. No. Only the interfaces described in the SOW apply. Q16. Clarify termination bar installation. A16. Install the bar above the cant strip to secure the existing TPO using fasteners compatible with the substrate. Q17. Clarify face cap/flashing quantities. A17. Approximately 14 vertical caps have slid; one horizontal cap is missing; two require replacement. Remove flashing attached to the ground level base face cap. Offerors must verify all quantities. Q18. Will the awning require removal? A18. Not anticipated. Do not include awning removal unless CO directed. Q19. How many pavers must be moved and how should they be stored? A19. Approximately 70 pavers must be moved. Store in the courtyard, stacking no more than six high. Specifications, Submittals, & Warranty Q20. Which parts of VA 07 54 23 apply? A20. Membrane accessory materials and compatibility requirements apply. VA 07 92 00 applies to sealant products. Where requirements conflict, the more stringent governs. Q21. Confirm applicability of installer approvals, warranty, submittals, and pre installation meeting. A21. Manufacturer-approved roofing installer: Not required. Sealant warranty: 10-year manufacturer warranty required. Submittals: Required for sealants and termination materials showing compatibility. Pre installation meeting: Required prior to NTP; the 30 day PoP begins after NTP issuance. Q22. Provide TPO manufacturer or warranty info. A22. Unknown. Contractor is not responsible for maintaining prior warranties and shall ensure compatibility of materials. Schedule & Period of Performance Q23. Will NTP be flexible due to temperature/weather? A23. Yes. NTP may be adjusted as appropriate. Excusable delays are handled per FAR 52.212 4(f). Q24. Are background checks/PIV issuance included in the PoP? A24. Yes. Badges only required for roof access. Delays arising from incomplete contractor submissions are not excusable. Q25. Will water spray or infiltration testing be required? A25. No. Optional testing may be performed at the contractor s cost unless CO directed. Q26. Anticipated award/NTP date? A26. Award is anticipated on or around November 1, 2026 (subject to change). Schedule adjustments for weather may be considered if CO approved. Labor Standards, Set Aside, Subcontracting, & Bonds Q27. Which wage determination applies? A27. Davis Bacon Wage Determination AR20260032 applies. Q28. Will the contract be issued under DBRA only? A28. Yes. Any SCLS references are not applicable and will be conformed administratively. Q29. Which limitations on subcontracting apply? A29. Construction limitations apply. For special trade construction, no more than 75% (excluding materials) may be subcontracted to non similarly situated entities. LOS certification must be submitted. Q30. Are performance and payment bonds required? A30. No. Bonds are not required under this solicitation unless added by future amendment. Q31. Confirm SDVOSB status requirements. A31. This is a total SDVOSB set aside. Offerors must be certified in the SBA database at time of offer and award. Materials & Trades Q32. Will brake metal caps be accepted if originals are unavailable? A32. Yes, if they closely match existing caps and are approved before installation. Q33. Is a glazing contractor required? A33. No. Quantities & Pricing Basis Q34. Can VA provide LF quantities of termination bar or number of caps? A34. No. Offerors must determine quantities during the site visit. Q35. Should offerors price awning removal? A35. No. Do not include awning removal unless CO directed. Unforeseen/Differing Site Conditions Q36. How will additional TPO damage discovered during work be handled? A36. Repairs beyond the defined scope may only be performed if directed in writing by the Contracting Officer. Entitlement will be determined at that time. Q37. Are leaks associated with recent renovations? A37. No. Leaks have been occurring since the membrane was installed. Attachments Q38. Are photos/figures available? A38. Yes. Figures 1 6 included for reference only. Offerors must verify all conditions independently. Figure 1. Curtainwall Above GE101A and GE10B Figure 2. Curtainwall Above GF100 Figure 3. Missing Horizontal window base cap Figure 4. Flashing attached to horizontal window face cap Figure 5. TPO membrane beneath windows Figure 6. Metal Awning
-Solicitation10/29/2026
-AwardedOpen
11/09/2026 - Update The purpose of this notice is to provide Government responses to industry questions about the Request for Proposal (RFP). Please reference file: SIMO RFP 80KSC027R0001 Questions 20261109. 11/02/2026 - Update The Government has identified a file labeling error within the Adobe portfolio titled "SIMO RFP 80KSC027R0001 Solicitation". The document named "DRFP Sections A-M.pdf" was incorrectly identified as a draft document. Offerors are hereby advised that "DRFP Sections A-M.pdf" is the Final Request for Proposal (RFP) document associated with Solicitation 80KSC027R0001 and should be treated as such for all proposal preparation and submission purposes. 10/30/2026 - Update NASA/KSC is pleased to issue RFP 80KSC027R0001 for SIMO. In addition, this notice provides a summary of significant changes from the Draft RFP. Refer to the "RFP 80KSC027R0001 Solicitation" portfolio to access these files. 10/30/2026 - Update The purpose of this notice is to remove and replace CBA-204-195 with CBA-2026-613 within the Collective Bargaining Agreements portfolio and upload the new Collective Bargaining Agreements file within the Attachments/Links as a controlled document. 10/28/2026 - Update The purpose of this notice is to provide additional Government responses to industry questions about the Draft Request for Proposal (DRFP) and provide CBA-2024-195 within the referenced files: DRFP 80KSC027R0001 Questions 20261028 and Collective Bargaining Agreements. 10/16/2026 - Update The purpose of this notice is to provide additional Government responses to industry questions about the Draft Request for Proposal (DRFP) within the referenced file: DRFP 80KSC027R0001 Questions 20261016 10/09/2026 - Update The purpose of this notice is to provide Government responses to industry questions about the Draft Request for Proposal (DRFP) and provide the following controlled documents: Bidders Library Controled Documents:GSDO-ACO-1010_Rev J, GSDO-ICD-1250-Rev_K, GSDO-MVVP-1042-02-ANX-02, GSDO-PLN-1001_Rev-F, GSDO-PLN-1043_Rev_W with errata, GSDO-PLN-1073, GSDO-PLN-1181_Rev-C, GSDO-PLN-1183_Rev C GSDO-PLN-1192_Rev_J with Errata, GSDO-PLN-1215_Rev-B, GSDO-PLN-1276_Rev-A, GSDO-PLN-1330_Rev_Baseline GSDO-RQMT-1256_Rev-H 10/06/2026 - Update The purpose of this notice is to provide the following controlled documents: Collective Bargaining Agreements (Controlled):CBA-2026-573 Amentum Spaceport and IAM and CBA-2026-574 Amentum Spaceport and Teamsters Bidders Library Controled Documents: GSDO-ICD-1250-Rev_K (Controlled), GSDO-MVVP-1042-02-ANX-02 (Controlled), GSDO-PLN-1073 (Controlled), GSDO-PLN-1215_Rev-B (Controlled), GSDO-PLN-1276_Rev-A (Controlled), and GSDO-PLN-1330_Rev_Baseline (Controlled). 09/24/2026 - Update The purpose of this notice is to identify updates within the SIMO Bidders Library reguarding the in-person Industry Days event for the SIMO acquisition. Please visit https://www.nasa.gov/kennedy/seb/simo/bidders-library/ for additional details. 09/15/2026 - Update The purpose of this notice is to post the Draft Request for Proposal (DRFP) Spaceport Infrastructure Maintenance and Operations (SIMO). Potential Offerors are requested to review and comment on the DRFP. Refer to the memorandum to potential Offerors within the portfolio, “DRFP 80KSC027R0001 Solicitation” for more information. This notice is not a request for proposal (RFP). No proposals are to be submitted in response to this notice. No RFP exists; therefore, do not request a copy of the RFP. Any subsequent RFP will be synopsized prior to its release and published on https://sam.gov. It is the Offeror’s responsibility to monitor this site for the release of the RFP and any amendments. Offerors are responsible for downloading their own copy of the RFP and any amendments, when released. For planning purposes, the Government anticipates: Due date for comments to the draft solicitation: October 06, 2026 RFP release: On or about October 28, 2026 Proposal due date: On or about December 7, 2026 Contract award: On or about February 11, 2027 Contract start: April 1, 2027 The Government anticipates hosting the following industry engagement opportunity: Presolicitation conference and on-site tour: October, 2026 Additional information and registration instructions for the above industry engagement opportunities will be available on the SIMO website at: https://www.nasa.gov/kennedy/seb/simo/. The SIMO Bidders Library of technical documents, reference documents, historical information, and other workload indicator data can be accessed at the above link. Controlled documents will be posted on https://sam.gov. 08/18/2026 - Update The purpose of this notice is to inform industry of the SIMO website: https://www.nasa.gov/kennedy/seb/simo/. This website provides potential offerors access to a bidder’s library of uncontrolled technical documents applicable to this acquisition, to include historical information. SECTION 1: INTRODUCTION The National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC) is hereby soliciting information from potential sources capable of maintaining and operating NASA facilities, systems, equipment, and utilities (FSEU) at KSC and Cape Canaveral Space Force Station (CCSFS); and providing logistics and other technical support services at KSC under a fixed price contract. The Spaceport Infrastructure, Maintenance, and Operations (SIMO) contract will succeed KSC’s Base Operations and Spaceport Services (BOSS) contract; however, complete requirements under the performance work statement are to be defined. Requirements contemplated under this acquisition reflect a significant departure from the services under the BOSS contract and its canceled follow-on procurement for Spaceport Operations and Center Services. Specifically, NASA is assuming end-to-end engineering responsibility for all assigned FSEU. Additionally, NASA will perform engineering analysis, causal determination, technical disposition, system-level evaluation, and corrective-action development. NASA will also directly operate and manage continuous spaceport integration activities including real-time monitoring, conflict assessment, and customer communication for all KSC Spaceport operations. This includes providing scheduling and master schedule management, integrated outage coordination and infrastructure impact management, prescribed burn coordination, and transport integration and hardware movement oversight. Finally, NASA will perform construction support services to include participation in workforce planning for Construction of Facility (CoF) and Local Authority projects; providing recommendations on necessary construction support levels; attending design reviews; reviewing design packages for constructability; participating in construction status discussions; and providing coordination and project-administration support. The SIMO contract is expected to support over 30 customers, including NASA, other Government agencies, and commercial customers, across approximately 220 square miles, primarily at KSC, Florida, and CCSFS, Florida. Performance under the contract is anticipated to commence no earlier than April 2027. NASA is seeking capability statements from all interested parties, including all socioeconomic categories of small businesses and Historically Black Colleges and Universities (HBCU)/Minority Institutions (MI) for the purposes of determining the appropriate level of competition and/or small business subcontracting goals. Vendors are encouraged to demonstrate capabilities as a prime, subcontractor and/or teaming partner. The Government reserves the right to consider a small business, small disadvantaged business (SDB), historically underutilized business zone, veteran owned small business, service-disabled veteran owned small business, or women-owned small business set-aside based on responses received. The North American Industry Classification System (NAICS) code is 561210, All Other Support Services, and the corresponding small business size standard is $47 million. SECTION 2: SERVICES/SCOPE Preventative maintenance includes performing preventive maintenance (PM) and predictive testing and inspection (PTI) on assigned FSEU in approximately 900 facilities of varying complexity. Assigned FSEU includes, but is not limited to, high voltage/medium voltage power; low voltage power; electronic security systems; traffic signaling systems; oxygen deficiency monitoring systems; fire alarm systems; fire suppression systems; Heating Ventilation and Air Conditioning (HVAC) and compressed air systems; elevators and chairlifts; plumbing; water distribution; wastewater collection and pre-treatment; stormwater infrastructure; facility interiors and exteriors; structures and towers; transportation infrastructure; landfill, borrow pit, and disposal services; heavy equipment; and various control and monitoring systems. Reactive maintenance includes trouble calls (TCs) and repairs to address deficiencies, malfunctions, or failures within the systems identified in the paragraph above. This work may range from simple tasks such as replacing stained ceiling tiles, fixing a slow-draining sink, or filling a pothole, to emergency responses required to eliminate hazards to personnel, equipment, or the environment; prevent loss of or damage to Government property; or restore essential services disrupted by unplanned events. More complex examples include replacing a 480-volt uninterruptible power supply or repairing a drawbridge. Reactive maintenance also encompasses service requests (SRs) for facilities-related work that is new in nature and not typically essential to protect, preserve, or restore FSEU. Examples include conference room and special‑event set‑ups; office renovations; installation of items such as whiteboards, bulletin boards, convenience power receptacles, task lighting, window treatments, shelves, and signage; fabrication of decals, nameplates, signs, and banners; cleaning ducts; sweeping, striping, and painting roads and parking lots; supporting fire‑alarm drills; setting up and maintaining temporary traffic‑control signage and barricades; and assisting with office moves, including boxes, refrigerators, furniture, and associated equipment. Operations include those recurring activities required to maintain a facility so that it can reliably perform its intended function, but which are not considered PM, repairs, and PTI. It includes watch standing or attendance type work requiring the presence of one or more qualified persons during a specified time period. Examples of these operations include adjusting equipment set points, resetting and restarting equipment, isolating and returning equipment to service, recording equipment status, monitoring generators and replenishing fuel levels, and hurricane preparation activities. Operations also encompass control and monitoring systems, which include system-specific control systems such as a Supervisory Control and Data Acquisition (SCADA) system that provides central control and monitoring of various facility power systems, utility systems, and energy management systems throughout KSC, as well as multiple Building Automation Systems (BAS), which monitor and control HVAC equipment and monitor environmental conditions in unique processing facilities. Logistics services are comprised of supply and materials management, equipment management, disposal management, and transportation management as defined in NPR 4100.1 NASA Supply Support and Material Management, NPR 4200.1 NASA Equipment Management Procedural Requirements, NPR 4300.1 NASA Personal Property Disposal Procedural Requirements, NPR 6000.1 Requirements for Packaging, Handling, and Transportation for Aeronautical and Space Systems, Equipment, and Associated Components, and NPR 6200.1 NASA Transportation and General Traffic Management. Technical support services include, but are not limited to, work control (e.g., assigning appropriate work types (e.g., TCs, repairs, and SRs), categorizing work requests, and scheduling and tracking work orders through completion), environmental regulatory compliance for managed facilities and operations; configuration management support on assigned FSEU; excavation support services, which include utility locating and surveying. Note: Over the past six years, work control has supported an average of approximately 18,350 PM work orders, 600 PTIs, 3,050 repairs, 3,100 SRs, and 6,700 TCs annually. SECTION 3: SUBMISSION INFORMATION Interested firms having the required capabilities necessary to meet the above requirement described herein should submit a capability statement of no more than 10 pages indicating the ability to perform all aspects of the effort. A page is defined as one side of a sheet, 8 1/2” x 11”, with at least 1-inch margins on all sides, using not smaller than 12-point type. Foldouts count as an equivalent number of 8 1/2” x 11” pages. Responses must be submitted electronically in portable document format (PDF) with searchable text. The capability statement should include: Company’s name and unique entity identifier. Point of contact name, title, and e-mail address. Company’s size and socioeconomic status under NAICS 561210, Facilities Support Services, with a size standard of $47 million. Interest as a prime or subcontractor. Company’s specific capabilities that are relevant to the requirements contemplated in Sections 1 and 2. It is not sufficient to provide brochures or generic information. Capability statements must include the company’s specific area(s) of interest, as well as reference to any contracts performed that are applicable to those areas. For each contract, identify the contract number, agency or customer, period of performance, the company’s role (i.e., prime or subcontractor), and contract or subcontract value. Informed input on realistic and appropriate small business subcontracting and/or participation goals for the specific requirement. This type of feedback supports NASA’s market research and helps ensure the acquisition strategy is aligned with actual industry capability. Feedback on barriers that may limit small business participation, such as certifications, unique technical requirements, security needs, specialized tools, or high-risk performance areas and/or strategies to increase SB participation, including: breaking requirements into smaller components; identifying areas appropriate for subcontracting; and considering teaming or mentor protégé approaches. Feeback on (1) barriers, if any, that may limit competition; (2) the method of pricing identified in Section 4; and (3) the proposed acquisition schedule identified in Section 5. Responses to this bullet are excluded from the page limitation identified above. All responses must be submitted electronically to the Contracting Officer at ksc-simo-info@mail.nasa.gov no later than 5 p.m. ET on July 1, 2026. Include “Notice ID 80KSC027R0001, SIMO” in the subject line of the email. SECTION 4: METHOD OF PRICING FOR MAINTENANCE SUPPORT REQUESTS (MSRs) Over the past six years, KSC has averaged approximately 31,800 work orders or MSRs (i.e., PM, PTIs, repairs, SRs, and TCs) annually. These work orders are broken down based on the following direct craft labor hours (i.e., hands-on technical troubleshooting, repair, installation, testing, inspection, documentation, and travel between job sites): 14 percent of work orders (approx. 4,305) took up to 1 hour to complete 15 percent of work orders (approx. 4,871) between 1 to 2 hours to complete 23 percent of work orders (approx. 7,442) between 2 to 4 hours to complete 23 percent of work orders (approx. 7,159) between 4 to 8 hours to complete 15 percent of work orders (approx. 4,786) between 8 to 20 hours to complete 10 percent of work orders (approx. 3,191) over 20 hours to complete As provided above, roughly 90 percent of all work requests require fewer than 20 hours to complete. Pricing methodology: The MSR structure considered for SIMO defines discrete work efforts categorized solely on the direct craft labor estimated to complete the effort. MSR categories are defined below and are based on historical information. MSR001: Greater than 0 hours and up to 1 direct craft labor hour MSR002: Greater than 1 hour and up to 2 direct craft labor hours MSR004: Greater than 2 hours and up to 4 direct craft labor hours MSR008: Greater than 4 hours and up to 8 direct craft labor hours MSR020: Greater than 8 hours and up to 20 direct craft labor hours MSR050: Greater than 20 hours and up to 50 direct craft labor hours MSR100: Greater than 50 hours and up to 100 direct craft labor hours MSR200-MSR1000: Greater than 100 hours in 100-hour increments Each MSR is fixed-price and includes the price of direct craft labor, plus the Contractor’s estimate for supporting resources (e.g., work control, management, logistics support). The Contractor determines the initial MSR categorization based on the estimated craft labor hours; however, recategorization may occur based on differing job site conditions (subject to Government approval). MSRs will be ordered on an IDIQ basis and there will be a guaranteed minimum ordering value for MSRs. Historical information will be provided by MSR category to assist with development of MSR pricing. Note: Fuel and “materials” will be reimbursable and excluded from the MSR price. Other 24/7 operations and recurring support will be firm-fixed-price and excluded from MSRs. SECTION 5: ACQUISITION SCHEDULE For planning purposes, the Contracting Officer anticipates: Draft solicitation release: September 14, 2026 Due date for comments to the draft solicitation: October 6, 2026 Presolicitation conference and site visit: October, 2026 Solicitation release: October 28, 2026 Proposal due date: November 30, 2026 Contract award: February 11, 2027 Contract phase-in (approx. 45 days): February 12, through March 29, 2027 Contract start: April 1, 2027 SECTION 6: INDUSTRY ENGAGEMENT The SIMO requirements development team (RDT) intends to hold various industry engagement opportunities throughout the acquisition process. At this time, the SIMO RDT contemplates one-on-one meetings with industry following receipt of capability statements. The purpose of the one-on-one meetings is to provide respondents an opportunity to elaborate on company capabilities and any other feedback included in the capability statement. Meetings will take place from 9 a.m. to 5 p.m. ET, the week of July 13, 2026, via Microsoft Teams. Meetings will not exceed 45 minutes in length. Respondents interested in meeting with the RDT are requested to provide in its capability statement the first and last name, position or title (to include the respective Contract Manager or Administrator), and company name of each attendee. Industry is further encouraged to revisit this notice for announcement of any additional engagement opportunities in the future. SECTION 7: OTHER No solicitation exists; therefore, do not request a copy of the solicitation. If a solicitation is released, it will be posted to https://sam.gov/. Interested firms are responsible for monitoring this website for the release of any presolicitation or solicitation notice. This sources sought notice is for information and planning purposes only and is not to be construed as a commitment by the Government nor will the Government pay for information solicited. Respondents will not be notified of the results of the evaluation. The Government has enabled the interested vendor list feature for this notice; interested firms are encouraged to register.
-Market Research12/07/2026
Amendment 0002 Participation Site Visit Amendment 0001 Solicitation N4008527R0004: This amendment should be acknowledged when your proposal is submitted. Failure to acknowledge may constitute grounds for rejection of your proposal. RFI's Questions and Answers Attachments Revised Pricing ELINS Sheet, Past Performance questionnaire (PPQ), Certification Cost and Pricing Data and Changes for Section (M) and Section (L) is included. The work includes, but is not limited to, furnishing all labor, supervision, management, tools, materials, equipment, transportation, incidental engineering, and other items necessary to provide general repairs necessary to keep training areas in usable condition for the Range and Maintenance Services
-Solicitation11/30/2026

Additional Details

Solicitation Number

80NSSC24872209Q

Archive Date

Jun 28, 2024

Office Address

STENNIS SPACE CENTER, MS, 39529