GovChime
Notice ID: c122806989dd47968c8dbe8ae517e109Special Notice

Zeolite molecular sieve replacement for oxygen generators

Archived on August 9, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:00 PM UTC−05:00
Posted
July 22, 2024
Notice type
Special Notice
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
National Aeronautics and Space Administration

Notice details

Office
NASA SHARED SERVICES CENTER
Place of performance
Cleveland, OH, 44135
Last updated
Dec 4, 2025

Identifiers

Solicitation number
80NSSC24877367Q
Notice ID
c122806989dd47968c8dbe8ae517e109

Description

NASA/NSSC has a requirement for Zeolite molecular sieve replacement for oxygen generators. NASA/NSSC intends to issue a sole source contract to NOVAIR USA CORP, 814 Wurlitzer DR, North Tonawanda, New York 14120-3042 under the authority of FAR 13.106-1(b)(1)(i). It has been determined that NOVAIR USA CORP is the sole provider of Zeolite molecular sieve replacement for oxygen generators. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Glenn Research Center (GRC). The Government intends to acquire commercial items and services using the provisions, clauses and procedures prescribed in FAR Part 12 and FAR Part 13. The NAICS Code for this procurement is 334516. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 4:00 p.m. Central Standard Time on 7/25/2024. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html .

Full description on SAM.gov

Award Overview

Possible prior contract

Inferred, not confirmed

Inferred, not confirmed. Matched by agency, NAICS, place of performance and end-date proximity. This is a candidate, not the contractor of record.

Contract end date

Oct 20, 2023

NAICS

334516

Agency

National Aeronautics and Space Administration

Dollar amounts are not shown for inferred matches because the link is heuristic. Open the award below to check it.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:80NSSC24877367Q
  1. Special NoticeCurrentJul 22, 2024

    Zeolite molecular sieve replacement for oxygen generators

    Notice c122806989dd47968c8dbe8ae517e109 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
**THIS IS A SOLE SOURCE REQUIREMENT** Facility Modicon PLC Control hardware. Upgrading obsolete drops.
-Special Notice11/13/2026
PLEASE SEE THE ATTACHED DOCUMENTS FOR DETAILS. QUOTES WILL NOT BE REIVEWED OR ACCEPTED. IF YOU FEEL YOUR COMPANY CAN PROVIDE THIS PRODUCT, SUBMIT A CAPABILITY STATEMENT.
-Special Notice11/12/2026
Indefinite Delivery Contract: Estimated quantity 77.000 ; Not to Exceed 350,000.00
-AwardedOpen
THIS IS A NOTICE OF INTENT TO AWARD A SOLE SOURCE CONTRACT AND IS NOT A REQUEST FOR COMPETITIVE QUOTES. High Temperature Furnace and Grips The National Aeronautics and Space Administration (NASA), Glenn Research Center (GRC) has a requirement for a 1500°C high temperature furnace and fully reversed fatigue rated grips to be used for testing of metallic and composite samples on an existing MTS 810 servo-hydraulic test frame. Specifically, the furnace and grips must meet the minimum requirements: One 1500°C High Temperature Furnace and specifications consisting of the following: Three zone hybrid furnace: MoSi2 center zone and kanthal top and bottom zones Must be capable of achieving specimen temperatures from 700°C to 1500°C Must heat to 1500°C from room temperature in less than 3 hours Clamshell design that opens wide to maximize accessibility for specimen and grip installation Must easily return to test (closed) position to maintain repeatability between tests Must be designed to accommodate MTS and other high-temperature axial extensometers Must have dual extensometer ports with interchangeable inserts Must have dual thermocouple ports with interchangeable inserts Ridid column mounting design to minimize vibration induced disturbances Temperature controller Must include furnace mounting hardware to existing MTS 810 load frame with 2.5” diameter columns with a center to center column spacing of 23.5” 1500°C High Temperature Grips and specifications consisting of the following: Must be engineered to work with 1500°C furnace to enable precise control of thermal gradients Thermal shielding and integral cooling must enable grip to work at temperatures to 1500°C and reduce overall thermal gradient while protecting the grip materials from excessive temperature (over 1000°C) enabling long life performance This grip must be provided with ceramic heat shields for improved durability Allow for specimen temperatures up to 1500°C Less than 1% thermal gradient over the specimen gage length Rated at 25kN for round specimens Rated at 4-7kN for flat specimens Must maintain constant preload on specimen through test loading Must maintain accurate alignment and low bending strains Must achieve less than 5% bending strain on a representative test specimen Must include integrated grip over temperature protection Must include air colling assembly Must include water cooling assembly Must include flat specimen interfaces (includes chamber and piston rod): wedge set, high temp 0-.188 (0-4.77mm) Must include threaded round specimen interfaces (includes chamber and piston rod): ¼-28 and ½-20 threaded adapters Specimen geometry should have a max overall length of 150 mm with 28 mm threaded length at each end Must be capable of 5 Hz or more fully reversed loading Must interface with 1”-14 threads on existing MTS 810 load frame Includes one week on site installation and training. Delivery 9 months after receipt of order. NAICS is 334519. NASA intends to award a Firm-Fixed-Price sole source contract under the authority of FAR 6.302-1 – Only One Responsible Source to: MTS Systems Corporation, 14000 Technology Drive, Eden Prairie, MN 55344-2290 The Government intends to acquire a commercial item using FAR Part 12. Interested organizations may submit their capabilities statements to perform the effort electronically via email to Matthew Sivic at matthew.sivic@nasa.gov no later than 1:00 pm EST on November 22, 2026. The capabilities statement must be submitted in either Word or PDF and must contain clear and convincing evidence that competition for this requirement would be advantageous to the Government. This notice does not constitute a solicitation and any cost associated with preparation and submission of data or any other cost incurred in response to this announcement are the sole responsibility of the respondent and will not be reimbursed by the Government. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this acquisition on a competitive basis. A determination by the Government not to compete this acquisition on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the Government. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at: https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf
-Special Notice11/22/2026
The TFOME II contract provides and manages the engineering and technician support, the manufacturing and development support, and the operations, maintenance, inspection, and certification support services needed to conduct aeronautics and space related testing in GRC test facilities and laboratories.
-Sole Source / J&AOpen

Additional Details

Solicitation Number

80NSSC24877367Q

Archive Date

Aug 9, 2024

Office Address

STENNIS SPACE CENTER, MS, 39529