GovChime
Notice ID: 41c1b8f0daa94dfeba82af43973f3074Special NoticeArchived

Atlas APA-2 Winch Mod

Archived on September 30, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
1:00 PM CDT
Posted
September 10, 2026
Notice type
Special Notice
Set-aside
No Set aside used
NAICS
332999: All Other Miscellaneous Fabricated Metal Product Manufacturing
Agency
National Aeronautics and Space Administration

Notice details

Office
NASA SHARED SERVICES CENTER
Place of performance
Houston, Texas, 77058
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
80NSSC26943875Q
Notice ID
41c1b8f0daa94dfeba82af43973f3074

Description

Please see the attached documents for details. 

QUOTES WILL NOT BE REVIEWED OR ACCEPTED. IF YOU FEEL YOUR COMPANY CAN PROVIDE THIS SERVICE, SUBMIT A CAPABILITY STATEMENT!

Full description on SAM.gov

Award Overview

Possible prior contract

Inferred, not confirmed

Inferred, not confirmed. Matched by agency, NAICS, place of performance and end-date proximity. This is a candidate, not the contractor of record.

Contract end date

Apr 3, 2026

NAICS

332999

Agency

National Aeronautics and Space Administration

Dollar amounts are not shown for inferred matches because the link is heuristic. Open the award below to check it.

Contacts

Contracting Officer

Primary Contact

Documents

Files (2)

  • SATPC0042782 Tab 07 Capability Statement.pdf

    237 KBAdded in Special Notice version 3Posted
    Download
  • SATPC0042782 Tab 04 4 SOW_Redacted.pdf

    182 KBAdded in Special Notice version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Special NoticeArchivedCurrent

    Atlas APA-2 Winch Mod

    Notice 41c1b8f0daa94dfeba82af43973f3074 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
SPECIAL NOTICE: VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT. NASA/NSSC has a requirement for INRODES Supplemental RDRE TCA Hardware NASA/NSSC intends to issue a sole source contract to Additive Manufacturing Engineering under the authority of FAR 12.102(a). It has been determined that Additive Manufacturing Engineering is the sole provider of INRODES Supplemental RDRE TCA Hardware NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Marshall Space Flight Center (MSFC). The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial The NAICS Code for this procurement is 332999. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 3:00 p.m. Central Standard Time on 11/11/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements. NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf . Primary Point of Contact: Cody Guidry Procurement Specialist II Cody.d.guidry@nasa.gov
-Special Notice11/11/2026
** THIS IS A SOLE SOURCE REQUIREMENT ** for STAINLESS JACK SCREW
-Special Notice10/28/2026
Please see the attached documents for details. QUOTES WILL NOT BE REVIEWED OR ACCEPTED. IF YOU FEEL YOUR COMPANY CAN PROVIDE THIS, PROVIDE A CAPABILITY STATEMENT.
-Special Notice10/27/2026
This is a modification to the notice entitled "Commercial Low Earth Orbit (LEO) Destination Contract (CLDC) Request for Proposal" which was posted on October 9, 2026. Additionally, Industry is notified that the due date for proposals has been extended to December 14, 2026 at 1:00 PM US Central Time. The following documents are posted: (1) RFP 80JSC027R0004P0001 Amendment 1 (2) Attachment L-07 Business Case Analysis Template Amendment 1 (3) CLDC Final RFP Question and Answers ______________________ This is a modification to the notice entitled "Commercial Low Earth Orbit (LEO) Destination Contract (CLDC) Request for Proposal" which was posted on October 9, 2026. You are notified that the following changes are made: The following document is posted: (1) CLDC Final RFP Pre-proposal Conference Charts ______________________ The National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) is issuing a Final Request for Proposal (RFP) for the Commercial Low Earth Orbit (LEO) Destination Contract (CLDC), 80JSC027R0004. You are notified of the following: The entire proposal is due by December 8, 2026 at 1:00 p.m. Central Time. Proposal Volume III, Past Performance is requested two (2) weeks early on November 24, 2026, but not officially due until the proposal submittal date. All questions regarding this RFP should be submitted in writing, electronically to Ashley Chaves, Contracting Officer, at jsc-cldc@mail.nasa.gov on or before 1:00 p.m. Central Time on October 21, 2026. Offerors are encouraged to submit questions as soon as possible for consideration. Questions shall be submitted using the Template for Submission of Comments in the “Attachments” section below. Telephone questions will not be accepted. The RFP and attachments have been posted in the "Attachments" section below. This RFP and associated documents supersede the Draft RFP in its entirety. Any additional documents will be available on www.sam.gov. The Technical Library is available on www.sam.gov under notice ID 80JSC025_CLDC_TECH_LIBRARY. If you have not accessed the Technical Library before, please complete the Technical Library Request Form and refer to the instructions under notice ID 80JSC025_CLDC_TECH_LIBRARY prior to submitting a request via www.sam.gov. The Pre-Proposal Conference for this solicitation is anticipated to be held (virtual only) via Microsoft Teams on Thursday, October 15, 2026, starting at 1:00 p.m. Central Time. Attendance at the pre-proposal conference is recommended; however, attendance is neither required nor a prerequisite for proposal submission. No recordings or use of Super Intelligence (SI) note-taking capabilities of any kind are permitted. Participation is limited to a total of ten (10) individuals from each company/team. Please RSVP for the Pre-Proposal Conference and One-on-Ones by Tuesday, October 13, 2026, 1:00 p.m. Central Time by sending an email to the following addresses: Name: Ashley Chaves Email: jsc-cldc@mail.nasa.gov The RSVP email for the Pre-Proposal Conference must include the following: Subject Line: 80JSC027R0004 Pre-Proposal RSVP Full company name Company address SAM Unique Entity ID and Commercial and Government Entity (CAGE) Code Company point of contact name, phone number, and email address Company size/type (e.g., Large Business, Small Business, Women-Owned Small Business, etc.) Names, position descriptions, and email addresses of attendees (no more than ten (10) individuals may represent any party or team of parties) The Pre-Proposal Conference One-on-Ones will be scheduled upon request and will be held in-person with a hybrid option at the Gilruth Center on October 16, 2026. One-on-Ones will be limited to Destination Prime Offerors. To request a One-on-One please send an email to the Contracting Officer, Ashley Chaves, at jsc-cldc@mail.nasa.gov. The RSVP email for the Pre-Proposal One-on-One must include the following: Subject Line: 80JSC027R0004 Pre-Proposal One-on-One RSVP Full company name Company address SAM Unique Entity ID and Commercial and Government Entity (CAGE) Code Company point of contact name, phone number, and email address Company size/type (e.g., Large Business, Small Business, Women-Owned Small Business, etc.) Names, position descriptions, and email addresses of attendees (no more than eight (8) individuals may represent any party or team of parties) Preference on in-person, virtual, or hybrid attendance for One-on-One and identify which individuals will be attending in-person or virtually. A confirmation email will be sent to acknowledge your reservation(s) and provide further instructions. NASA anticipates releasing the Pre-Proposal Conference charts prior to the Pre-Proposal Conference. Please continue to monitor this SAM.gov posting for updates on the release of any documents, as well as the CLDC website. NASA FAR Supplement (NFS) Clause 1852.215-84, Ombudsman, is applicable. The Ombudsman for this acquisition is Donna M. Shafer, donna.m.shafer@nasa.gov, 281-483-4258. It is the offeror's responsibility to monitor this website for amendments to this solicitation and other information. Potential offerors will be responsible for downloading their own copy of the solicitation and amendments. Prospective offerors are encouraged to notify the Contracting Officer of their intent to submit an offer.
-Solicitation12/14/2026
Battelle is requesting a proposal as noted in the attached documents. Please note that Battelle will entertain partial proposals and reserves the right to award multiple contracts as needed. Please also provide the following information with the proposal: Lead time for items Completed Reps & Certs form Technical Proposal as noted in the attached RFP document If there are any questions, please feel free to contact me directly. Thanks Chris Martin Contracting Specialist Pacific Northwest National Laboratory Phone: 509-372-6026 E-mail: Christopher.martin@pnnl.gov
-Solicitation11/13/2026

Additional Details

Solicitation Number

80NSSC26943875Q

Archive Date

Sep 30, 2026

Office Address

STENNIS SPACE CENTER, MS, 39529