Notice ID: b0c8835533cb48f28e73d4efd13bb710Sources Sought
Sources Sought - Medium Voltage (MV) Transformer - NASA Stennis Space Center
Archived on May 7, 2026. Original response deadline: . Full description on SAM.gov.
Description
1. Introduction and Purpose
The National Aeronautics and Space Administration (NASA)/ NASA Shared Service Center (NSSC) is hereby soliciting information from potential sources for one (1) Medium Voltage (MV) Transformer. This is a Sources Sought only. NASA is seeking capability statements from all interested parties, including all socioeconomic categories of Small Businesses, for the purposes of determining the appropriate level of competition and/or small business subcontracting goals.
2. Draft Technical Specifications
Interested firms must demonstrate the capability to meet or exceed the following draft Statement of Work:
- See Attachment 01 – Draft Statement of Work
3. Submission Requirements
Vendors having the capabilities necessary to meet or exceed the stated requirements are invited to submit appropriate documentation, literature, brochures, and references. Please include:
- Company Profile and UEI Number
- Socioeconomic Status (e.g., 8(a), WOSB, SD-VOSB, HUBZone)
- Product literature and technical specifications
- Confirmation of product as a 'Commercial Product' per FAR 2.101
- Confirm your ability to deliver the MV Transformer by May 2027 and offer a 24-month warranty
4. Response Instructions
Submit all required documentation electronically to the Point of Contact listed below by the specified deadline:
Deadline for Submission: 4/22/2026 at 2:00 PM CDT
Point of Contact: Caitlin Angstadt (Caitlin.e.angstadt@nasa.gov)
5. Legal Disclaimer
No solicitation exists; therefore, do not request a copy of the solicitation. If a solicitation is released, it will be synopsized on SAM.gov. This Sources Sought is for information and planning purposes only and is not to be construed as a commitment by the Government nor will the Government pay for information solicited. Respondents will not be notified of the results of the evaluation.
Overview
Agency:
National Aeronautics and Space Administration
Office:NASA STENNIS SPACE CENTER
Posted:April 15, 2026
NAICS:335311: Power, Distribution, and Specialty Transformer Manufacturing
Last Updated:Aug 21, 2026
PSC:6120: TRANSFORMERS: DISTRIBUTION AND POWER STATION
Set-Aside:No Set aside used
Type:Sources Sought
Place of Performance:Stennis Space Center, Mississippi, 39529
Award Overview
Possible prior contracts
Sign in to see possible prior contracts for this requirement (matched by agency, NAICS and place of performance; not confirmed).
Contacts
Contracting Officer
Primary Contact
Caitlin Angstadt
Documents
Showing 1 of 1 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
| Sources Sought | NATIONAL AERONAUTICS AND SPACE ADMINISTRATION | Apr 15, 2026 | 773.14 KB |
Lifecycle
Solicitation:
80SSC0- Market Research
Pre-solicitation or formal solicitation typically follows within 30–180 days. (estimate)
- Market ResearchCurrentApr 15, 2026
Sources Sought - Medium Voltage (MV) Transformer - NASA Stennis Space Center
Similar Opportunities
Title | Phase | Agency | NAICS | Set Aside | Posted | Deadline | Location |
|---|---|---|---|---|---|---|---|
*PLEASE NOTE* THIS IS NOT A REQUEST FOR QUOTES. ANY PRICE OFFERS RECIEVED WILL NOT BE REVIEWED / ACCEPTED AT THIS TIME. A price quote alone generally does not provide sufficient information to evaluate a vendor's technical capability. See the attached SOW. SPECIAL NOTICE: VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT. NASA/NSSC has a requirement for CONDUCTOR CABLING. NASA/NSSC intends to issue a sole source contract to New England Wire Technologies Corp., Lisbon, New Hampshire 03585-6603, under the authority of FAR 12.102(a). It has been determined that New England Wire Technologies Corp. is the sole provider of CONDUCTOR CABLING. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Glenn Research Center (GRC). The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial The NAICS Code for this procurement is 335929. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 8:00 a.m. Central Standard Time on 10/20/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements. NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf . Primary Point of Contact: Monica Wilson Procurement Assistant III monica.d.wilson@nasa.gov Alternate Point of Contact: KAREN ARTIS, CONTRACT SPECIALIST, karen.l.artis@nasa.gov | Special Notice | 335929 | No Set-Aside | 10/15/2026 | 10/20/2026 | - | |
SPECIAL NOTICE: VENDORS MUST REFERENCE THE NOTICE ID WHEN SUBMITTING A CAPABILITY STATEMENT. NASA/NSSC has a requirement for high-precision robotic motion control hardware. NASA/NSSC intends to issue a sole source contract to NEWPORT CORP under the authority of FAR 12.102(a). It has been determined that NEWPORT CORP is the sole provider of high-precision robotic motion control hardware. NASA/NSSC will be the procuring center for this effort. Performance will be located at NASA/ Goddard Space Flight Center (GSFC). The Government intends to acquire Commercial items or services using the provisions, clauses and procedures prescribed in FAR Part 12 for Commercial The NAICS Code for this procurement is 335314. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 3:00 p.m. Central Standard Time on 10/9/2026. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements. NASA FAR Supplement Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at https://www.hq.nasa.gov/office/procurement/regs/Procurement-Ombuds-Comp-Advocate-Listing.pdf . Primary Point of Contact: Cody Guidry Procurement Specialist II Cody.d.guidry@nasa.gov | Special Notice | 335314 | No Set-Aside | 10/07/2026 | 10/09/2026 | - | |
** THIS IS A SOLE SOURCE REQUIREMENT ** for 10 EMRAX 228 High Voltage Electric motors | Special Notice | 335312 | No Set-Aside | 10/06/2026 | 10/08/2026 | Hampton, VA | |
The Defense Logistics Agency-Aberdeen, on behalf of the Army Integrated Logistics Supply Center (ILSC) – Supply Chain Management Directorate (SCMD) – Strategic Sourcing Directorate (SSD), intends to acquire Parts to support the Electronic Shop Vans (ESVs). Requirements Description: This is a market survey to locate additional sources of supply for a COMMERCIAL 28VDC Power Supply for use in Electronic Maintenance Repair Vans, throughout the world. It converts the 60Hz, 120/208VAC, 3-phase input power to 28VDC electrical power, available to each of the workstations at the 28VDC electrical posts. PLEASE NOTE: This is NOT a market survey to locate additional sources of supply to design/develop a 28VDC Power Supply, again, it is for a commercially available 28VDC Power Supply. Additional Sources of supply for a 28VDC PWR Supply must offer a commercially available 28VDC PWR Supply that is an equal substitute for form/fit/function. Interchangeability exist in electrical input/output interface cables, to allow easy plug-in with existing cables that are inside the ESVs. Interchangeability shall also exist in fit, so that the replacement 28VDC PWR Supply will fit exactly in the designated compartment of the electrical rack that is inside the ESVs. Each offeror must provide all supporting equipment specifications data/documents for your proposed 28VDC Power Supply and provide any supporting technical documentation to verify/prove that your proposed commercial equipment is equal to P/Ns previously placed in the ESVs, as explained above. The burden of proof is on the offeror to prove that their commercial equipment satisfies the above form/fit/function requirement. The bid sample electrical/mechanical inspections will be performed at Tobyhanna Army Depot during an “Industry Day” at a date to be determined/announced. The Government will extend an invitation to all respondents of this Market Survey. Each potential supplier will be asked to bring in their form/fit/function replacement to Tobyhanna to demonstrate that their commercial unit(s) are drop-in (plug & play) equivalents, and will fit in the electrical equipment rack, and also attach to the existing interface cables inside the van/shelter, just as was stated in the attached requirements. Tobyhanna will provide the shelters/vans and power, and experienced electricians to install all the commercial equipment inside the available ESVs. The power supplies meet specific performance and interface requirements that are necessary to meet the operational requirements of the Transportable Electronic Maintenance Shops. The Transportable Electronic Maintenance Shops are used at Army Divisions or Battalion level as repair maintenance shops for performing required maintenance on electronic equipment and their components to support Combat Support Systems and Communications Systems (CSS&CS); and various Command, Control, Cyber, Communications, Computers, Intelligence, Surveillance and Reconnaissance (C5ISR) systems. The Government does not possess the technical data package (TDP) for the parts. The TDP is not available for release. The 28VDC Power Supplies are commercial items that were designed and manufactured by AMETEK from its standard commercial product lines to meet requirements for the AN/ASM-146 & AN/ASM-189 Transportable Electronic Maintenance Shops. Supply Planner has indicated requirements through FY31 for this Power Supply. Items and/or Services to Be Procured: NSN: 6120-01-508-1787 NOMENCLATURE: POWER, SUPPLY PART NUMBER: 005035003 CAGE: 89022 NSN: 6120-01-508-1273 NOMENCLATURE: POWER, SUPPLY PART NUMBER: SGX30X334C-0ASAR CAGE: 25965 Requested Response Information: We request that sources who can supply the listed parts or services to provide all supporting equipment specifications data/documents for your proposed 28VDC Power Supply, and provide any supporting technical documentation to verify/prove that your proposed commercial equipment is equal to the # SGX30X334C-0ASAR (NSN: 6120-01-508-1273) and P/N:005035003 (NSN: 6120-01-508-1787), as explained above. The burden of proof is on the offeror to prove that their commercial equipment satisfies the above form/fit/function requirement. Also please complete the questionnaire. In your response, please include your company name, CAGE code, and a technical point of contract with email address and telephone number. Notice, Response Due Date, and Points of Contact: This is NOT a Request for Quote or Proposal. The Government does not intend to award a contract on the basis of this SSA or reimburse any costs associated with the preparation of responses to this SSA. This Sources sought announcement (SSA) is for planning and market research purposes only and shall not be construed as a commitment by the Government. The information gathered from this announcement will be used to determine if responsible sources exist, and to assist in determining if this effort can be competitive and/or set aside for Small Business. Furthermore, the Government will use the information, in part, to determine the best acquisition strategy for a potential procurement action and/or to assist in making acquisition strategy decisions in the future. All SSA responses should be emailed to the Points of Contact at the email addresses listed below. No phone inquiries will be accepted, either as a response to this action or for information requests. All requests for information must be submitted via email to the Technical Point of Contact and the DLA Aberdeen Small Business Office. Please submit responses by 10/23/2026 Technical Point of Contact: david.teicher.civ@army.mil Secondary Point of Contact: Patrick.e.kiley2.civ@mail.mil | Market Research | 335311 | No Set-Aside | 10/01/2026 | 10/23/2026 | Aberdeen Proving Ground, MD | |
No telephone requests will be accepted. Direct your requests and communications to ATTN: DLA-AHCB, Cheyenne Wright, Contract Specialist, via email Cheyenne.Wright@dla.mil For request for solicitation, provide your name, the company name, Cage Code and a telephone number. PRON: D16H0985D1 The Government proposes to acquire a Single Purchase, Firm-Fixed Price contract for a quantity of Five (5) each of a POWER SUPPLY, NSN: 6120-01-723-1692; Part Number: 13646197-10 applicable to the Patriot Missile Weapon System. THIS ITEM IS SOLE SOURCED TO HDL Research Lab Inc., CAGE CODE 66015. Production Lead Time (PLT) is 5 each, 135 Days After Contract Award (DACA) with deliveries to Fort Bliss, Texas 79916-5801. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release for solicitation; however, the solicitation will not close prior to the date stated above. Foreign Firms are reminded that all requests for solicitation must be processed through their respective embassies. This part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. As a result, this acquisition is currently being procured under Federal Acquisition Regulation (FAR) 6.302-1(a)(2). All responsible sources may submit an offer, which shall be considered by the Agency. Firms are encouraged to seek source approval in order to compete for future solicitations by seek source approval in order to compete for future solicitations by emailing inquiries to: usarmy.redstone.devcom-avmc.mbx.amr-ss-sar@mail.mil. THIS ACQUISITION CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, USC., SEC 2751 ET SEQ) OR THE EXPORT ADMINISTRATION ACT (TITLE 50, USC., APP 2401-2402) EXECUTIVE ORDER 12470. THIS INFORMATION CANNOT BE RELEASED OUTSIDE THE UNITED STATES WITHOUT PRIOR APPROVAL OF THE GOVERNMENT. EXPORT CONTROL REQUIRES THE APPLICABLE CERTIFICATIONS TO BE CURRENT FOR BOTH THE QUOTER AND MANUFACTURER. THE OFFEROR AND ANY SOURCE(S) OF SUPPLY IT WILL USE FOR CONTRACT PERFORMANCE MUST HAVE AN ACTIVE UNITED STATES/CANADA JOINT CERTIFICATION PROGRAM (JCP) CERTIFICATION TO ACCESS EXPORT CONTROLLED DATA. DLA DOES NOT INTEND TO DELAY AWARD IN ORDER FOR AN INELIGIBLE OFFER OR ITS SOURCE(S) SUPPLY TO APPLY FOR AND RECEIVE DLA CONTROLLING AUTHORITY APPROVAL TO ACCESS THE EXPORT CONTROLLED DATA. | Pre-Solicitation | 335311 | No Set-Aside | 05/11/2026 | 05/26/2026 | Redstone Arsenal, AL |
Additional Details
Solicitation Number
80SSC0
Archive Date
May 7, 2026
Office Address
STENNIS SPACE CENTER, MS, 39529