Management and Operating Contractor for the Fermi National Accelerator Laboratory (FNAL)
Archived on December 31, 2024. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM UTC−06:00
- Posted
- January 3, 2024
- Notice type
- Solicitation
- NAICS
- 541715: Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- Agency
- Department of Energy
Notice details
- Office
- SC OAK RIDGE OFFICE
- Place of performance
- Batavia, IL, 60510
- Last updated
- Dec 4, 2025
Identifiers
- Solicitation number
- 89243123RSC000083
- Notice ID
- 94c15bb2362e465181c6fb28a5428320
Description
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
No documents available.
Lifecycle
89243123RSC000083- Market Research
- Pre-Solicitation
- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- Market ResearchFeb 6, 2023
Management and Operating Contractor for the Fermi National Accelerator Laboratory (FNAL)
- Special NoticeJul 5, 2023
Management and Operating Contractor for the Fermi National Accelerator Laboratory (FNAL)
- Pre-SolicitationJul 20, 2023
Management and Operating Contractor for the Fermi National Accelerator Laboratory (FNAL)
- Special NoticeDec 19, 2023
Management and Operating Contractor for the Fermi National Accelerator Laboratory (FNAL)
- SolicitationCurrentJan 3, 2024
Management and Operating Contractor for the Fermi National Accelerator Laboratory (FNAL)
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
**Please see Amendment 4 dated 11/03/2026.** **Please see Amendment 3 dated 11/02/2026.** **Please see Amendment 2 dated 10/30/2026.** **Please see Amendment 1 dated 10/15/2026.** NLR seeks to engage leading technical subject matter experts (SMEs) to help buildings industry stakeholders scale up and meet demand for lower-cost, high-quality buildings. SMEs will support DOE’s Building America program, both its just-launched new construction support program and existing support programs for building envelope retrofits. The new construction support program will provide technical assistance to help partners erect high-quality buildings faster and at lower cost, ultimately delivering savings to everyday Americans. NLR seeks leading subject matter experts (SMEs) in research, field validation, analysis, dissemination, and technical support efforts to help builders, manufacturers, contractors, and other industry stakeholders scale up and meet demand. This work will focus on factory optimization, product design and materials innovation, and digital tools and modeling. For envelope retrofits, this work will help reduce first costs and lower utility bills in existing homes by focusing on technical topics including, but not limited to, addressing moisture, humidity, and infiltration through envelope upgrades and whole-home solutions. Across both areas, SMEs will also conduct modeling and analysis, data collection, industry analysis, and market scaling support. This work will include knowledge transfer to provide actionable guidance and information to industry stakeholders. For over 30 years, DOE’s Building America Program has been a source of innovations and best practices needed to deliver affordable and efficient homes. NLR supports DOE’s Building America Program through scientific leadership and building science expertise to ensure high-quality, impactful results from Building America’s research efforts. | 40% | Solicitation | 11/16/2026 |
Notice of Opportunity: BUILTT for DOE Pilot Technologies The Department of Energy (DOE), in partnership with the National Nuclear Security Administration (NNSA), announces the availability of technologies under the Bolstering Underutilized Industry by Leveraging Technology Transfer (BUILTT) pilot program. The pilot is being conducted by the Nevada National Security Sites (NNSS), Y-12 National Security Complex, and Kansas City National Security Campus (KCNSC). Program Overview BUILTT is intended to help qualified small and medium-sized businesses (SMBs) manufacture low-volume, high-impact technologies developed by DOE/NNSA Labs, Plants, and Sites. These technologies support mission requirements but may have limited commercial markets or insufficient production volume for traditional technology licensing. The program uses a Cost Reduction License (CRL), under which a qualified SMB may receive rights to produce a specified technology for a nominal licensing fee. The CRL is intended to support the sale of the resulting products to DOE, NNSA, and other government customers at a fair and reasonable pre-negotiated price. Where applicable, the CRL may also address commercial sales. Technology Areas The pilot technologies generally involve specialized manufacturing, instrumentation, sensing, materials, electronics, and analytical or production systems. Examples of technology types include: - Specialized optical and high-speed imaging equipment for experimental diagnostics; - Radiation, chemical, pressure, and environmental sensing systems; - Precision electrical and mechanical components; - Advanced materials, coatings, bonding, and fabrication processes; - Laboratory-scale mixing, processing, and production equipment; and - Software, data-analysis, and instrumentation-support technologies. A separate attachment to this posting provides the exact technology descriptions, applicable intellectual-property information, and available patent links. Prospective respondents should review that attachment to identify technologies that align with their capabilities. Eligibility and Participation Participation is open to U.S.-based SMBs that meet applicable U.S. Small Business Administration requirements. Preference may be given, when appropriate, to businesses located near participating DOE/NNSA sites and to businesses with designations such as SBA 8(a) or HUBZone. Interested businesses may be evaluated based on: - Technical and manufacturing capabilities; - Relevant facilities, equipment, personnel, and experience; - Ability to meet applicable quality, safety, security, and regulatory requirements; - Ability to support low-volume production and government customers; - Financial and organizational capacity; and - Alignment with one or more of the listed technologies. Selected respondents will be subject to vetting and due diligence before any matchmaking, licensing, or procurement activity occurs. Participation in this posting does not guarantee selection, a license, a purchase order, or a contract. How to Respond Interested businesses should contact the DOE/NNSA BUILTT program team at TPIP@nv.doe.gov with the subject line “BUILTT for DOE Pilot Technologies.” Responses should identify the respondent’s areas of interest and briefly describe relevant technical, manufacturing, and government-contracting capabilities. Additional information may be requested during the evaluation process. General Conditions Submission of a response does not create an express or implied contract between the respondent and Mission Support and Test Services, LLC (MSTS), DOE, NNSA, NNSS, Y-12, or KCNSC. MSTS and the participating organizations are not obligated to review or evaluate any response, select a respondent, issue a CRL, place an order, or award a contract. Respondents are not entitled to compensation, damages, or remuneration if this posting is modified, suspended, canceled, or not followed. Primary Point of Contact Technology Partnerships and Intellectual Property Office Email: TPIP@nv.doe.gov Keywords: technology transfer, licensing, manufacturing, commercialization NAICS Code: 541715 — Research and Development in the Physical, Engineering, and Life Sciences (except Biotechnology and Nanotechnology) | 40% | Market Research | 03/31/2027 |
Every direct air capture (DAC) system depends on its sorbent, and every sorbent eventually wears out. This DAC from Los Alamos National Laboratory tackles that weakness head-on. It replaces the harsh release step with a gentler, ammonia-assisted process, which shields amine-based sorbents from the degradation that drives up operating costs. The method works with a broad family of established sorbent materials and support structures, so developers can build it into existing capture designs rather than starting over. Challenges Direct air capture is a two-step cycle: a sorbent captures CO2 from the air, then releases it as a concentrated stream. Liquid sorbents need expensive equipment and a lot of energy, more than 400 kJ of work per mole of CO2. Amine-based solid sorbents capture more CO2, regenerate at about 120°C and even perform better in humid air. Their weakness is durability. At release temperatures of 80°C and above, oxygen reacts with the amines to form free radicals and the amines can evaporate. Both effects wear the sorbent down over repeated cycles. Replacing sorbent drives up the overall cost of direct air capture and stands in the way of large-scale deployment. Problems Solved DAC changes how the sorbent gives up its captured carbon. First, the sorbent absorbs CO2 from ambient air at ordinary outdoor temperatures and pressures. Then, instead of relying on the conventional release step that damages the material, the method exposes the loaded sorbent to ammonia gas, which prompts it to release the CO2. Regeneration takes place at 75–120°C under reduced pressure (20–600 mbar), and the released CO2 can then be stored. The method is designed to prevent sorbent degradation and erosion. The application sets performance goals ranging from at least 50% of original capacity after five cycles to as much as 99% across 500 cycles. It applies to widely used amine sorbents, on supports that include silica, alumina, carbon materials and cellulose. Longer sorbent life means lower operating costs and a stronger economic case for direct air capture. Advantages Extends the useful life of capture sorbents and slows their breakdown Lowers operating costs by reducing how often sorbent must be replaced Works with many established amine sorbents and support materials Captures carbon at normal outdoor temperatures and pressures Delivers a high-purity CO2 stream for storage or reuse Improves the overall economics of carbon removal projects Market Applications Carbon removal and climate technology (direct air capture plants, carbon removal credit projects) Carbon storage and utilization (geologic storage, CO2-to-fuels and chemicals) Industrial gases (captured CO2 supply for food, beverage and manufacturing uses) Sorbent and specialty materials (advanced adsorbent production, sorbent coatings) Air handling and indoor environments (CO2 scrubbing in buildings, enclosed or controlled spaces) Energy and heavy industry (decarbonization strategies for utilities, oil and gas companies and manufacturers) TRL 2 S-167699 LA-UR-26-29519 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search | 40% | Special Notice | 11/17/2026 |
Opportunity: NETL is actively seeking collaboration to advance and commercialize an innovative adsorptive method for the highly efficient recovery of Heavy Rare Earth Elements (HREEs) and other Critical Minerals (CMs) from coal and its derivatives. This groundbreaking approach integrates physical enrichment for feedstock pre-concentration, significantly enhancing overall process efficacy. Background: Traditional HREE/CM extraction from coal derivatives is often costly, energy-intensive, and chemical-laden. Existing multi-step chemical extraction operations rely on vast amounts of expensive solvents and chemicals, resulting in low recovery and impure products due to inherently low REE concentrations. The heterogeneity of coal byproducts also demands complex pre-treatment, preventing a universal solution. Thus, there is an urgent need for cost-effective extraction technologies that significantly reduce chemical and energy consumption while offering feedstock flexibility. Description: NETL researchers have developed a process for the cost-effective recovery of concentrated HREEs and other critical minerals (CMs), including Gallium, Germanium, Vanadium, Cobalt, and Nickel. This method significantly reduces processing time to less than 5 minutes, demonstrates high selectivity for HREEs and CMs over fouling metals exceeding 1,000, and is proven effective with coal, coal refuse, and their derivatives. The core process involves an adsorptive technology to recover HREEs and CMs from coal and coal-derived solutions, followed by the release of high-purity HREEs and CMs through a pH-swing regeneration operation. Configured with multiple adsorption columns, the method can be continuously operated. It also incorporates a physical separation step, flotation or sonication enhanced flotation, for pre-concentrating REEs within the feedstock. This unique NETL method successfully recovers HREEs and CMs from feedstocks even at parts-per-million concentrations. By offering unparalleled low-maintenance requirements, affordability, and scalability compared to existing alternatives, it establishes a new standard for HREE/CM recovery technology. Advantages/Benefits: Improved cost efficiency. Minimal pressure drop. High capacity and selectivity for HREEs Short sorption contact times. Regenerable and robust performance tested in cyclability studies. Potential Applications: Coal refuse/waste streams Mine tailing/waste streams Acid mine drainage Industrial demineralization Development Status: Current stage of technology development: TRL ☐ 0-2 ☒ 3-5 ☐ 5-9 NETL has filed for patent protection on this invention. NETL is actively seeking industry partners with the capability and vision to bring this critical technology to market. By moving this innovation beyond the laboratory and into commercial application, our partners can gain a significant competitive advantage through licensing and/or cooperative research and development collaborations. Interested parties are invited to discuss this opportunity further under non-disclosure agreements to safeguard proprietary information. NOTE: THIS IS NOT A PROCUREMENT. Entities interested in developing technologies for HREE and CM recovery should provide an electronic or written statement of interest, which includes the following: 1. Company Name and Address 2. The name, address and telephone number of a point of contact 3. A description of the relevant expertise and/or facilities Please provide a complete statement to ensure consideration of your interest in this opportunity. The subject heading in an email response should include the Notice ID and the title of the opportunity and be directed to the Primary and Secondary points of contact listed below. | 40% | Special Notice | 11/10/2026 |
A descriptor‑based software and model for amine-based carbon capture discovery Organizations that design sorbents for removing CO2 from air gain a fast, chemistry‑aware way to rank candidates and focus resources on the most promising structures. AmineBind ML, a trained surrogate model, packaged with user‑friendly software, predicts CO2 binding energies for amine active sites from simple molecular inputs. Teams can screen vast chemical spaces in minutes, align material choices with target regeneration temperatures and reduce trial‑and‑error in lab campaigns. Overview Developed by Los Alamos National Laboratory, the software ingests a chemical structure as a SMILES string, identifies amine binding sites, then uses a descriptor‑based machine learning surrogate model trained on roughly 20,000 electronic‑structure calculations to predict CO2 binding energetics. Inference runs far faster than density functional theory, which enables high‑throughput exploration of millions of candidate chemistries for direct air capture. Predictions at the atomic scale can be combined with mesoscale modeling to feed broader materials pipelines. Technology Description AmineBind ML includes a Python‑based toolkit that parses molecular inputs in SMILES format, computes chemically meaningful descriptors for amine sites, and applies a trained model to estimate CO2 binding energies. Training data come from binding energetics computed for ~20,000 molecules, anchoring predictions to first‑principles energetics and supporting generalization across diverse amine chemistries. Model inference achieves orders‑of‑magnitude speed‑ups versus DFT, which enables rapid ranking and down‑selection prior to expensive simulations or synthesis. This bundle supports screening of millions of structures for direct air capture, delivering candidate materials that balance strong CO2 uptake with manageable regeneration temperatures to minimize operational costs and mitigate sorbent degradation. The atomic‑level predictions can integrate with mesoscale treatments, creating a robust modeling pipeline that links molecular binding energetics to process‑level performance. Advantages Rapid screening of large chemical spaces from simple SMILES inputs Orders‑of‑magnitude faster predictions than DFT for CO2 binding energetics Better targeting of materials that balance capture strength and regeneration needs Integration with mesoscale models to support end‑to‑end materials workflows Software package designed for researchers in chemistry and materials science Market Applications Direct air capture (materials discovery, sorbent optimization) Specialty chemicals (amine functional design, process modeling) Computational chemistry software (screening tools, model‑based decision support) Environmental services (air capture planning, emissions reduction analysis) TRL 3 Software information: T5090 U.S. Patent pending LA-UR-26-27826 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search | 40% | Special Notice | 03/02/2027 |
Additional Details
Solicitation Number
89243123RSC000083
Archive Date
Dec 31, 2024
Office Address
OAK RIDGE, TN, 37831