GovChime
Notice ID: 8fd3187edf3d4885b4533bb2424256bcSources Sought

Sources Sought Depot Level Maintenance at FRCE

Responses closed . Full description on SAM.gov.

Overview

Response deadline
5:00 PM EDT
Posted
November 5, 2026
Notice type
Sources Sought
Set-aside
8(a) Set-Aside (FAR 19.8)
NAICS
336411: Aircraft Manufacturing
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVAIR.NAVAIR HQS.FLEET READINESS CENTER
Place of performance
Cherry Point, North Carolina, 28533
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Notice ID
8fd3187edf3d4885b4533bb2424256bc

Description

The Commander, Fleet Readiness Center (COMFRC) seeks qualified 8(a) vendors to provide Depot Level Maintenance support at Fleet Readiness Center East (FRCE), Cherry Point, North Carolina, in accordance with the draft Statement of Work.  

This is a Request for Information (RFI)/Sources Sought only.  There is no solicitation available at this time.  The RFI is issued for the purpose of conducting Market Research in accorcance with Federal Acquisition Regulation (FAR) part 10. Additionally, the Government is interested in quesitons/comments/feedback on the SOW.  The intended contract will be for a one (1) year base period and four (4) Option periods.  The submission of information is for planning purposes only and is not to be construed as a commitment by the Governmt to procure any items or services.  Draft SOW is attached.  

The information will not be returned, and no compensation will be provided from any response to this announcement. Proprietary information and trade secrets, if any, must be clearly marked. All information received that is marked Proprietary will be handled accordingly.

The applicable North American Industry Classification System (NAICS) code is 336411– Aircraft Manufacturing

Interested 8(a) concerns should indicate interest in and capability to provide tasks identified above to the Contract Specialist (email below), in writing as early as possible, but no later than 5:00 PM EST, 10 June 2026

Potential vendors must have an active registration in the System for Award Management (SAM) in order to be eligible for award, as well as have NAICS 336411 identified in their SAM profile.

Interested firms are requested to respond to this notice and include the following in their response:

  1. Firm’s information to include name of representative, address, phone number CAGE Code, DUNS number;
  2. Interest in nature of participation [e.g., prime contractor, teaming partner, primary subcontractor];
  3. Business size [e.g., Small Business, HUBZone, SDVOSB, (Must provide certification of SDVOSB) WOSB ( Must provide Certification of WOSB certification) , SDB, Large Business]
  4. General Capability – Only a brief statement of qualifications (not to exceed five (5) pages double sided) is requested at this time.

Interested contractors may provide the above information via e-mail to the electronic address listed below. All communications must be addressed to the Contract Specialist via e-mail ONLY.

POC Contract Specialist: Jeffrey Smith, jeffrey.t.smith6.civ@us.navy.mil

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (1)

  • DRAFT DLM STATEMENT OF WORK_FRCE for Comments.docx

    238 KBAdded in Sources Sought version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Sources Sought

    Sources Sought Depot Level Maintenance at FRCE

    Notice 762513de816b4864b2bb871c2b738277 on SAM.gov

  2. 4
    Version 4Sources SoughtCurrent

    Sources Sought Depot Level Maintenance at FRCE

    Notice 8fd3187edf3d4885b4533bb2424256bc on SAM.gov

Other notices for this solicitation

  1. Special NoticeRelated noticeNov 4, 2026

    Depot Level Maintenance at FRCE Industry Day Opportunity

    Notice 685a10523a754d71898be44ec6926cc8 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Fleet Readiness Center East (FRCE) invites interested parties to attend an Industry Day and Site Visit in support of an upcoming requirement for Depot Level Maintenance Support. Anticipated Acquisition Strategy: The Government intends to solicit this requirement as a competitive SBA 8(a) Business Development Program Set-Aside. Purpose: This event is designed to provide industry partners with an overview of FRCE’s depot-level maintenance, repair, and overhaul (MRO) requirements, tour primary facilities aboard MCAS Cherry Point and the North Carolina Global TransPark (GTP) in Kinston and foster early industry engagement prior to solicitation release.
-Special Notice11/18/2026
Disclaimer THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. Introduction The Naval Air Systems Command (NAVAIR), in support of PMA-261 Heavy Lift Helicopters Program Office is seeking sources that have the skills, experience and facilities required to successfully provide installation and material support of CH-53E/K Depot Level Aircraft Modifications. Taskings may include conducting Depot Level A-Kit installations, including but not limited to conducting recurring, non-recurring and prototype aircraft modifications in accordance with Engineering Changes to aircraft designated by the H-53 Program Office, PMA-261. All work will be performed at Government owned CONUS and OCONUS locations. THIS SOURCES SOUGHT IS NOT A REQUEST FOR PROPOSAL. It is a market research tool being used to determine potential and eligible businesses capable of providing the services described herein prior to determining the method of acquisition and issuance of a Request for Proposal. The Government is not obligated to and will not pay for any information received from potential sources as a result of this notice. Background PMA-261 is responsible for providing H53 Heavy Lift aircraft that are capable, reliable and supportable to the fleet in support of operational missions and objectives. A primary element in meeting this responsibility is by integrating the CH-53E/K aircraft with up-to-date warfighting capabilities, safety enhancements and reliability improvements through Depot Level aircraft modifications. Anticipated Period of Performance The contract is intended to satisfy Government requirements for FY27 through FY32. Anticipated Contract Type The contract type is anticipated to be a stand-alone Indefinite Delivery, Indefinite Quantity (IDIQ) utilizing Cost-Plus Fixed Fee, Cost Reimbursement, and Firm-Fixed pricing arrangements. Required Capabilities The specific requirement of the effort under this sources sought notice is to provide highly capable and experienced Depot Level artisans to inspect, disassemble, modify, assemble, perform post-inspection, operational checks (if required) and document aircraft modifications of CH-53E/K aircraft in accordance with applicable Technical Directives. Primary sites for aircraft modifications will be MCAS Miramar and MCAS New River but will also occasionally require modifications at Government-owned OCONUS locations. Also, the ability to produce and deliver aircraft retrofit A-Kits to support the fielding of aircraft modifications. The tasking includes maintenance and supply support in compliance with CNAFINST 4790.2 series, DCMA 8210 and H-53 Maintenance Instruction Manual procedures with management and performance of the following services: Incorporate aircraft modifications Produce and deliver aircraft retrofit A-Kits Organization Level maintenance (Scheduled and Unscheduled) Prospective offerors MUST: Be able to stand-up aircraft modification capabilities to support aircraft inductions to provide the above support within thirty (30) days after contract award. Eligibility The applicable NAICS code is 336411 with a Small Business Size standard of 1,500 employees. The Product Service Code (PSC) is K015. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size. Incumbent This is a follow-on requirement. The incumbent contractor is Adams Communication & Engineering Technology Inc. Submission Details All responsible sources are encouraged to submit a capability statement that addresses their ability to perform the full range of services described above at the Platform level at their own organic facilities and other locations. It is requested that interested businesses submit to the contracting office a brief capabilities statement package, in accordance with the directions provided below, (no more than 10 pages in length, single-spaced, 12 point font minimum) demonstrating ability to perform the service listed under the required capabilities. This documentation must address at a minimum the following: Company Name; Company Address; Company Business Size, and Point-of Contact (POC) name, phone number, fax number, and e-mail address. Company profile to include number of employees, annual revenue history from the last five years, office location(s), UEI number, and a statement regarding current small/large business status; Prior/current corporate experience performing efforts of similar size and scope within the last five years, including contract numbers, contract values, Government point of contract with current telephone number, and a brief description of how the referenced contract related to the services described herein; Answers to the following questions, providing details, including contract numbers and any government POCs to demonstrate the experience claimed: Describe your experience (in the last 5 years) in providing rotary wing aircraft Depot Level Modifications. Describe your experience with maintaining aircraft in accordance with the COMNAVAIRFORINST 4790.2 Series. Describe and quantify your ability to meet the required timeline from Task Order/Contract Award to aircraft induction for a CH-53E/K aircraft level modification event. List any external dependencies or GFE requirements to meet that timeline. Describe your experience/capabilities in performing maintenance and modification work concurrently on C/MH-53E series aircraft or similar airframes. Describe your production experience/capabilities, engineering capabilities and internal processes in producing and delivering aircraft retrofit A-Kits CH-53E/K series aircraft or similar airframes. List any industry certifications of your processes. Describe your capability or existing agreements for access to technical data to include engineering/repair data for CH-53E/K aircraft and components. Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted via email to Jamie Schoemaker at Jamie.L.Schoemaker.civ@us.navy.mil, in either Microsoft Word or Portable Document Format (PDF). The deadline for response to this request is 5:00 p.m., Eastern Standard Time, 5 November 2026. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be protected from any release outside the Government. Information and materials submitted in response to this request WILL NOT be returned. Classified material SHALL NOT be submitted. No phone calls will be accepted. All questions must be submitted via email. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to these Sources Sought. Contact Information Primary Point of Contact: Jamie Schoemaker Procuring Contract Officer jamie.l.schoemaker.civ@us.navy.mil Secondary Point of Contact: Charles Johnson Contracting Specialist charles.w.johnson6.civ@us.navy.mil Contracting Office Address: Building 2272, Room 155 47123 Buse Road Unit IPT Patuxent River, MD 20670 United States
-Market Research11/05/2026
***Start of Notice Description 20261109*** To ensure clarity for submission of questions related to the N0001927R1025 solicitation, the Government provides the following update to paragraph three (3) of the 27 October 2026 N0001927R1025 formal Request for Proposal (RFP) posting: Questions related to the solicitation are due not later than midnight (12:00am) 09 November 2026 and shall be submitted using the Excel file titled “Question and Answer Form_Final_RFP_Offeror Name” posted with the solicitation. Questions shall be submitted via email to Contract Specialist Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil) on or before the 09 November 2026 submission date. While submission of questions will be accepted up to midnight (12:00am) 09 November 2026, interested parties are encouraged to submit as early as possible to facilitate timely review and response by the Government. ***End of Notice Description 20261109*** ***Start of Notice Description 20261027*** The Naval Air Systems Command (NAVAIR), on behalf of PMA-271 (Airborne Strategic Command, Control and Communications Program Office), posts formal Request for Proposal (RFP) N0001927R1025 for the E-6B Mercury Depot Maintenance, Repair and Overhaul (MRO) effort. This notice is a follow-on to the E-6B MRO DRAFT Request for Proposal Notice N00019-25-RFPREQ-APM271-0012. NAVAIR intends to award a single source Indefinite Delivery Indefinite Quantity (IDIQ) contract for MRO services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. This IDIQ is anticipated to include one (1) five-year base ordering period with the option for one (1) additional five-year ordering period from Fiscal Years (FYs) 2027 through 2036. Planned award is during fourth quarter of Government FY 2027. Questions related to the solicitation are due not later than 09 November 2026 and shall be submitted using the Excel file titled “Question and Answer Form_Final_RFP_Offeror Name” posted with the solicitation. Questions shall be submitted via email to Contract Specialist Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil) on or before the 09 November 2026 submission date. Proposals are due not later than the date and time as specified in Block 9 of the SF 33. However, potential Offerors are encouraged to submit portions of their proposal associated with past performance 14 calendar days prior to that submission date. See Section L paragraph 3.1 of the solicitation document for details. Access to Final RFP: The solicitation, including all attachments, is posted in the Solicitation Module of the U.S. Government PIEE website with restricted access and will only be made available to companies incorporated in the United States as verified via SAM.gov. The final RFP and associated attachments may contain Controlled Unclassified Information (CUI) and may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. App. 2401 et seq.). Request Access Procedures: Accordingly, all requests for access to the final RFP and associated attachments must be in writing and shall include a statement that the company intends to submit as a prime contractor, as well as a certified copy of a DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service at (800) 352-3572 or https://www.dla.mil/Logistics-Operations/Services/JCP/#jointcertification-program-jcp-office; company name, address, and CAGE code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module). After obtaining a certified DD Form 2345, each potential Offeror shall transmit via email its written request for access to the final RFP and associated attachments, with the certified DD Form 2345 attached to the email to Contract Specialist Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil). Prior to granting access to the final RFP and associated attachments, the Government will verify that the company requesting the data is incorporated within the United States based on CAGE code listing in SAM.gov. Upon review of the potential Offeror’s written request and verification of potential Offeror’s status in SAM.gov, the Government will provide the potential Offeror access to the final RFP and associated attachments in the Solicitation Module of the U.S. Government PIEE website. Companies that had previously requested and been granted access to the DRAFT Request for Proposal under Notice N00019-25-RFPREQ-APM271-0012, have already been provided access in PIEE to the formal RFP under Notice N0001927R1025. The Government may also provide separately, via the dissemination method described below, technical documents to assist potential Offerors with developing their proposals. Access to Other Technical Documents: (Potential Prime Contractor Requests Only) Technical documents have been made available to assist with developing proposals. Some of the technical documents may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. App. 2401 et seq.). Accordingly, all requests for access to technical documents must follow the “Request Access Procedures” described above. Upon review of the potential Offeror’s written request and approved DD Form 2345, the Government will provide the potential Offeror access to the technical documents via the DoD SAFE website (previously AMRDEC) - https://safe.apps.mil/. The data custodian listed in Block 3 of DD Form 2345 will receive a link, via e-mail, to the package download page as well as a password. The password is unique for each recipient and will be disabled once SAFE detects that the user successfully downloaded each file within the package. CUI Disclaimer: Distribution of CUI by a potential Offeror to that potential Offerors team members, partners, subcontractors, suppliers and/or vendors shall be the responsibility of the potential Offeror and shall be limited to a need-to-know basis. All guidance contained herein with regard to handling, distribution and destruction of CUI data shall be flowed down to all subcontractors and team members. Those who access or take receipt of any technical data shall comply with all laws, export controls and distribution statements associated with the document. ***End of Notice Description 20261027***
-Solicitation12/11/2026
SOURCES SOUGHT MARKET RESEARCH SURVEY FOR PLANNED MAINTENANCE INTERVAL CONTRACT FOR E-6B 1.0 INTRODUCTION a. The Fleet Readiness Center Southeast (FRCSE) requires contractor services to execute Planned Maintenance Interval (PMI) events for the United States Navy E-6B Mercury aircraft fleet. The E-6B is a dual-mission aircraft derived from the commercial Boeing 707 airframe. It is a long-range, narrow-body, four-engine swept-wing jet that hosts a Very Low Frequency (VLF) dual trailing wire antenna system and high-altitude, survivable communications equipment. Operating across a broad frequency spectrum to transmit and receive secure and non-secure voice and data, the E-6B provides survivable, endurable, and reliable airborne command, control, and communications (ABNCP) and Take Charge and Move Out (TACAMO) operations supporting the President of the United States, the Secretary of Defense, and the United States Strategic Command (USSTRATCOM). Due to the strategic importance of the platform, maintenance activities are executed under a DX-A1 national defense priority rating, requiring seamless schedule synchronization, stringent quality controls, and high-fidelity operational turnaround. b. This Market Research tool is being used to identify potential and eligible firms, of all sizes, prior to determining the method of acquisition and issuance of a solicitation. The results of the Sources Sought will be utilized to determine if any Small Business Set-Aside opportunities exist. Additionally, this sources sought is being used to gather constructive information from industry to improve the RFP. c. Attachments: 1. Draft Performance Work Statement (PWS) d. Anticipated period of performance is June 2027 through May 2031. e. Primary Work Location: Refer to the attached Draft PWS. 2.0 DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT IS STRICTLY VOLUNTARY. 3.0 ANTICIPATED CONTRACT TYPE The Government is anticipating a C-Type, Firm-Fixed Price contract. 4.0 REQUIRED CAPABILITIES Refer to the attached Draft PWS. 5.0 ELIGIBILITY a. The applicable NAICS code for this requirement is 336411 – Aircraft Manufacturing, with a Small Business Size Standard of 1,500 employees. b. The PSC code is J015 – Maintenance, Repair, and Rebuilding of Equipment: Aircraft and Airframe Structural Components. c. Note: FAR 52.219-14 Class Deviation 2021-O0008 Limitation on Subcontracting requires a small business prime on a Set-Aside to perform at least 50% of the cost of contract performance. Small business primes may now count “first tier subcontracted” work performed by similarly situated entities as if it were performed by the prime itself. Please read the full text of the clause deviation (52.219-14 Class Deviation 2021-O0008 dated 09/10/21 at https://www.acquisition.gov/browse/index/far). To assist in our market research and determination of any applicable small business set-aside for this effort, if you are a small business interested in priming this effort and plan to utilize “similarly situated entities” to meet the Limitations on Subcontracting, please identify the name & CAGE Code of the specific firm(s) you intend to partner/subcontract with to meet the requirements as well as their SB size status under the NAICS that you as the prime would assign for their workshare. Information regarding any planned similarly situated entity should be included in answering any questions outlined in the Sources Sought Notice (SSN) in order to assist the Government’s capability determination. d. The Cybersecurity Maturity Model Certification (CMMC) level requirement will be Level 2 Self-Assessment. 6.0 SUBMISSION REQUIREMENTS A: Interested parties are requested to respond to the following sections: Section 1: Corporate Profile and Socioeconomic Status 1. Provide company name, commercial physical address, CAGE code, UEI number, website, and designated Point of Contact (name, phone, email). 2. Identify your company’s business size standard under NAICS 336411 (1,500 employees). 3. State whether your business is classified as an SBA-certified Small Business (SB), Small Disadvantaged Business (SDB), 8(a), Woman-Owned Small Business (WOSB), Economically Disadvantaged WOSB (EDWOSB), HUBZone Small Business, Veteran-Owned Small Business (VOSB), or Service-Disabled Veteran-Owned Small Business (SDVOSB). 4. Under current SBA recertification regulations, do you anticipate your company retaining its small business status over the next 3 to 5 years under NAICS 336411? 5. Small Business Participation: If responding as a Small Business prime: (a) What specific percentage of the total requirement do you plan to perform in-house versus subcontracting? Detail how your organization will comply with the limitation on subcontracting requirements (FAR 52.219-14 / 13 CFR 125.6), ensuring that at least 50% of the cost of contract performance incurred for personnel will be expended by your firm or similarly situated entities. (b) Provide supporting rationale demonstrating that your firm possesses adequate financial resources, capital backing, and operational capacity to perform an effort of this magnitude. Section 2: Facility Capabilities and Geographic Location 6. Do you currently own or lease a fully operational facility located within 25 miles of NAS Jacksonville that satisfies all airfield, runway (>= 8,000 ft x 150 ft; 342,000 lbs gross weight), apron, and hangar constraints? 7. If your current facility does not fully meet these specifications, provide a detailed milestone schedule and capital investment plan illustrating how your company will achieve full compliance within the mandatory 30-calendar-day transition phase-in period. 8. Confirm whether your facility possesses: Enclosed hangar bays capable of housing two (2) Boeing 707/E-6B aircraft concurrently. Full strip, prime, and paint environmental booths sized for E-6B airframes. 20,000 sq ft CLS logistics warehouse space and 20,000 sq ft staging space per aircraft bay. Furnished office suites for 15 Government personnel with NMCI VPN drops and dedicated conference rooms. Approved Liquid Oxygen (LOX) handling/storage, Ethylene Glycol servicing, and battery charging infrastructure. Section 3: Technical Capabilities and Airframe Experience 9. Describe your company's depth of past performance and technical experience performing depot-level modifications, PMI, structural inspection, and strip/paint on Boeing 707, C-135, or E-6B series aircraft (or relevant large commercial/military transport category airframes) within the last five (5) years. 10. Outline your capability to maintain a standing workforce of certified aircraft mechanics, sheet metal technicians, non-destructive inspection (NDI) specialists, avionics technicians, and on-site liaison structural engineers. 11. Describe your experience with U.S. Navy Naval Aviation Maintenance Program (COMNAVAIRFORINST 4790.2E), DCMA 8210.1D, NALCOMIS/OOMA logging, Automated Weight and Balance System (AWBS), and Navy deficiency reporting (JDRS). 12. Detail your processes for executing high-stand fuel leak inspections (95% tank fill), defueling, purging, and gas-free fuel cell maintenance. Section 4: Security, Cybersecurity, and Quality Assurance 13. Confirm that your facility holds a current Defense Counterintelligence and Security Agency (DCSA) verified SECRET Facility Clearance with SECRET safeguarding capabilities. 14. Confirm that your firm can supply 100% sole U.S. citizen personnel (possessing or capable of immediately obtaining SECRET clearances) to support all touch-labor and supervisory roles. 15. State your current Cybersecurity Maturity Model Certification (CMMC) status. Have you achieved a CMMC Level 2 Self-Assessment score posted to SPRS (Supplier Performance Risk System)? 16. Confirm current certification to AS9100 (Revision D) or ISO 9001:2015. Section 5: Transition, Industry Feedback, and Acquisition Strategy 17. Transition Feasibility: Is the required 30-calendar-day Phase-In period realistic and achievable for your organization to reach full operational capability? If not, what transition duration is recommended, and what are the primary critical-path drivers? 18. Turnaround Time (TAT): Based on the scope of E-6B DLMS PMI and concurrent strip/paint, what is your estimated nominal Turnaround Time (calendar days) from aircraft induction to flight acceptance? 19. Government/Contractor Workshare: What risks or efficiencies do you foresee regarding the division of workshare (where the contractor executes PMI baseline inspections/tasks and on-site engineering, while the Government team performs Defect Correction Criteria (DCC) 1–6 unscheduled structural repairs)? B: Submission Instructions: a. Response format: Responses must be submitted in electronic format (Adobe PDF or Microsoft Word compatible). Font size shall not be smaller than 10-point, with standard margins. b. Page Limit: Responses should be concise and are requested not to exceed twenty-five (25) pages, excluding title pages and corporate certifications. Proprietary Data: Proprietary information, if any, must be clearly and distinctly marked on each page. The Government will handle proprietary submissions with appropriate care and safeguards. No classified information shall be submitted in response to this Sources Sought. No phone calls will be accepted. Any information or materials provided in response to this Sources Sought Notice WILL NOT be returned. Classified material SHALL NOT be submitted. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought Notice. c. Submission Deadline: All responses must be received no later than 12 November 2026 at 1400 EST. d. Points of Contact: Submit responses and direct technical/contractual inquiries via email to: Contract Specialist: Courtney Dagenhart, courtney.e.dagenhart.civ@us.navy.mil Procuring Contracting Officer: Beverley Rhamdeow, beverley.s.rhamdeow.civ@us.navy.mil
-Market Research11/12/2026
***Start of Notice Update 20261020 The purpose of this update is to provide Government responses to follow-up industry questions provided via e-mail 14 October 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting Rev 3. ***End of Notice Update 20261020*** ***Start of Notice Update 20260917*** The purpose of this update is to provide Government responses to follow-up industry questions provided as a part of the E-6B MRO Pre-Solicitation Conference One-on-One meetings held 29 July 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting Rev 2. This notice also updates to the E-6B Maintenance, Repair and Overhaul (MRO) Pre-solicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 29 July 2026. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around the end of July 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about first quarter FY 2027, with a tentative closing date 45 days after final solicitation posting. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. In response to a question raised during the Pre-Solicitation Conference One-on-One meetings held on 29 July 2026, if interested parties desire access to E-6B MRO Interactive Electronic Technical Manuals, in advance of the Final Solicitation release, to support proposal development a written request for access shall be submitted to Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil), Mr. Travis Guy (david.t.guy.civ@us.navy.mil), and Ms. Lisa Troccoli (lisa.j.troccoli.civ@us.navy.mil) by 06 August 2026. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solicitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. ***End of Notice Update 20260917*** ***Start of Notice Update 20260821*** The purpose of this update is to provide Government responses to follow-up industry questions provided as a part of the E-6B MRO Pre-Solicitation Conference One-on-One meetings held 29 July 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting Rev 1. ***End of Notice Update 20260821*** ***Start of Notice Update 20260730*** The purpose of this update is to provide Government responses to industry questions discussed during the E-6B MRO Pre-Solicitation Conference One-on-One meetings held 29 July 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting. ***End of Notice Update 20260730*** ***Start of Notice Update 20260729*** This notice is an update to the E-6B Maintenance, Repair and Overhaul (MRO) Pre-solicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 09 April 2026. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around the end of July 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about late fourth quarter FY 2026, with a tentative closing date 45 days after final solicitation posting. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. In response to a question raised during the Pre-Solicitation Conference One-on-One meetings held on 29 July 2026, if interested parties desire access to E-6B MRO Interactive Electronic Technical Manuals, in advance of the Final Solicitation release, to support proposal development a written request for access shall be submitted to Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil), Mr. Travis Guy (david.t.guy.civ@us.navy.mil), and Ms. Lisa Troccoli (lisa.j.troccoli.civ@us.navy.mil) by 06 August 2026. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solicitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. ***End of Notice Update 20260729*** ***Start of Notice Description 20260709*** NOTE - The Solicitation number for the E-6B Maintenance, Repair and Overhaul (MRO) effort has been updated to N0001926R1039. The Naval Air Systems Command (NAVAIR), on behalf of PMA-271 (Airborne Strategic Command, Control and Communications Program Office), posts a DRAFT Request for Proposal (RFP) for the PMA-271 E-6B Mercury Depot MRO effort. This notice is a follow-on to the E-6B MRO Presolicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 09 April 2026. NAVAIR intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for MRO services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of work under this IDIQ contract will include performing scheduled and unscheduled depot maintenance tasks and repairs in accordance with the Planned Maintenance Interval Specification, aircraft modifications via technical directives and engineering change proposals, and material fabrication. This effort will also include aircraft inductions for standalone drop-in modifications and repairs and a Contractor Field Team to support modifications and repairs offsite. Anticipated award is third quarter of Government Fiscal Year (FY) 2027. The 24 July 2026 response date identified in this posting is the response date for receiving Industry comments and questions associated with the DRAFT RFP. The DRAFT RFP, including all attachments, will be posted in the Solicitation Module of the U.S. Government PIEE website with restricted access and will only be made available to companies incorporated in the United States as verified via SAM.gov. The intent of this posting is to solicit feedback from Industry on the DRAFT RFP and associated attachments prior to issuing the final RFP. Please submit questions using the file named “Draft RFP Question and Answer form_Offeror Name.xlsx” and replace Offeror Name with your Company name. This file is posted in the Solicitation Module of the U.S. Government PIEE and will be accessible with the DRAFT RFP and associated attachments after Offerors are granted access following the procedures set forth under “Access to documents”. Please submit questions not later than 24 July 2026. Any proprietary information provided in the questions or comments shall be marked or annotated accordingly. Classified material SHALL NOT be submitted. Access to documents – The DRAFT RFP and associated attachments may contain Controlled Unclassified Information (CUI) and may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. App. 2401 et seq.). Accordingly, all requests for access to the DRAFT RFP and associated attachments must be in writing and shall include a statement that the company intends to submit as a prime contractor, company name, address, and Commercial and Government Entity (CAGE) Code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module), as well as a certified copy of a DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service at (800) 352-3572 or https://www.dla.mil/Logistics-Operations/Services/JCP/#jointcertification-program-jcp-office; company name, address, and CAGE code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module). After obtaining a certified DD Form 2345, each potential Offeror shall transmit via email its written request for access to the DRAFT RFP and associated attachments, with the certified DD Form 2345 attached to the email to Contract Specialists Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil). Prior to granting access to the DRAFT RFP and associated attachments, the Government will verify that the company requesting the data is incorporated within the United States based on CAGE code listing in SAM.gov. Upon review of the potential Offeror’s written request and verification of potential Offeror’s status in SAM.gov, the Government will provide the potential Offeror access to the DRAFT RFP and associated attachments in the Solicitation Module of the U.S. Government PIEE website. Distribution of CUI by a potential Offeror to that potential Offeror’s team members, partners, subcontractors, suppliers and/or vendors shall be the responsibility of the potential Offeror and shall be limited to a “need to know” basis. All guidance contained herein with regard to handling, distribution and destruction of CUI data shall be flowed down to all subcontractors and team members. Those who access or take receipt of any technical data shall comply with all laws, export controls, and distribution statements associated with the document. *************************************************************************************************** Additionally, NAVAIR is providing an opportunity for vendors to attend a Virtual Pre-Solicitation Conference and virtual One-on-One meetings to discuss the DRAFT RFP and associated attachments on 29 July 2026 and 30 July 2026, beginning at 08:00:00 AM (Eastern Time) and ending at 15:00:00 PM (Eastern Time) via Microsoft Teams. The Virtual Pre-Solicitation Conference and One-on-One Meetings will be held at the unclassified level. To attend either or both meetings, register via email to Contract Specialists Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (David.t.guy.civ@us.navy.mil) by 24 July 2026 at 05:00:00 PM (Eastern Time). Pre-Solicitation Conference is open to all interested parties (potential Offerors and Subcontractors) One-on-One Meetings are open only to potential Prime Offerors Registration for either meeting must be completed in advance and is required for participation. Registration must include a list of attendees (name, title, phone number, and email). Exceptions will not be made for late registration. Changes to the registration information (cancellation or substitution) can be made up until 12:00:00 PM (Eastern Time) on 27 July 2026. Registration requests received after the deadline will not be accepted. Registered companies will be notified via email on or about 27 July 2026 with the time and information on how to join each session. Participation in the virtual meetings is neither mandatory nor is it a prerequisite to future participation by a potential Offeror in any potential future solicitations/contracts. DISCLAIMER PURSUANT TO FEDERAL ACQUISITION REGULATION (FAR) 15.101(b), THIS NOTICE IS BEING ISSUED FOR A DRAFT RFP. THE DRAFT RFP IS SOLELY FOR INFORMATION AND PLANNING PURPOSES. IT DOES NOT CONSTITUTE AN RFP OR A PROMISE TO ISSUE AN RFP IN THE FUTURE. THE DRAFT RFP DOES NOT COMMIT THE GOVERNMENT TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. THE FINAL REQUIREMENT WILL BE DEFINED UNDER A FORMAL RFP. FURTHER, THE NAVY IS NOT AT THIS TIME SEEKING PROPOSALS AND WILL NOT ACCEPT UNSOLICITED PROPOSALS. RESPONDENTS ARE ADVISED THAT THE GOVERNMENT WILL NOT PAY FOR ANY INFORMATION OR ADMINISTRATIVE COSTS INCURRED IN RESPONSE TO THIS PRESOLICITATION NOTICE. ALL COSTS ASSOCIATED WITH RESPONDING TO THIS ANNOUNCEMENT WILL BE SOLELY AT THE EXPENSE OF THE INTERESTED PARTY. IT IS THE RESPONSIBILITY OF THE POTENTIAL OFFERORS TO MONITOR THIS WEBSITE FOR ADDITIONAL INFORMATION PERTAINING TO THIS REQUIREMENT. ***End of Notice Description 20260709*** ***Start Presolicitation Update 20260409*** This notice is an update to the E-6B Maintenance, Repair and Overhaul (MRO) Presolicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 14 January 2026. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around the end of May 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about mid fourth quarter 2026, with a tentative closing date 30 days after final solicitation posting. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solcitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. ***End Presolicitation Update 20260409*** This notice is an update to the E-6B Enhanced Phased Maintenance-Heavy (EPMH) Overhaul and Repair Sources Sought Notice N00019-25-RFPREQ-APM271-0012 posted on 30 May 2024, and the Special Notice of questions for interested party response posted on 11 August 2025. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around 24 April 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about 24 June 2026, with a tentative closing date of 08 August 2026. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solcitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice.
-Pre-Solicitation11/30/2026

Additional Details

Solicitation Number

N68520-26-RFPREQ-JC00000-0175

Archive Date

Feb 15, 2027

Office Address

PATUXENT RIVER, MD, 20670