GovChime
Notice ID: 918f37f99de44a6d8aac416c4c27df86Sources Sought

Sources Sought for Overhaul/Repair/Upgrade of the UH-60/AH-64 T700 Turbine Engine Supervisory Control Unit

Responses closed . Full description on SAM.gov.

Overview

Response deadline
2:00 PM CST
Posted
October 20, 2026
Notice type
Sources Sought
Set-aside
No Set aside used
NAICS
336412: Aircraft Engine and Engine Parts Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC RSA.W6QK ACC-RSA
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W58RGZ-27-R-A016
Notice ID
918f37f99de44a6d8aac416c4c27df86

Description

This is a sources sought announcement. This announcement is in support of market research to determine the feasibility of a competitive acquisition and to identify potential sources that can provide overhaul/repair/upgrade of the following item:

NOMENCLATURE: CONTROL UNIT, SUPERVISORY, TURBINE ENGINE
INPUT NSNs:               P/Ns:
2995-01-718-3932        4155T12P10
2995-01-680-3143        4155T12P09
2995-01-641-8045        4155T12P08
2995-01-572-1860        4155T12P07

OUTPUT NSN:             P/N:
2995-01-718-3932        4155T12P10

ESTIMATED QUANTITY RANGE: Minimum 150 each – Maximum 1860 each (Maximum includes a Foreign Military Sales (FMS) Quantity of 310)

The applicable North American Industry Classification System (NAICS) code is 336412 and the size standard is 1,500 employees. Interested parties who have the capability to perform the above effort should respond to this notice and identify your business size and socio-economic status as applicable. All submissions must include full company names, Point of Contacts (POCs) to include name, position, office and mobile telephone numbers, and email address.

The Control Unit, Supervisory, Turbine Engine is not a Critical Safety Item (CSI). A Depot Maintenance Work Requirement (DMWR) is not available to support a full and open competitive solicitation. Currently, the only known approved source for overhaul/repair/upgrade of the Control Unit, Supervisory, Turbine Engine is Triumph Engine Control Systems, LLC (large business).

Contractors are encouraged to seek Source Approval Requests (SAR) to become an approved source by following the guidance at the following website: https://amrdec.army.afpims.mil/Directorates/STI/

This announcement is for information and planning purposes only and should not be construed as a commitment by the Government for any purposes. This announcement does not constitute a Request for Proposal (RFP). A synopsis will be issued at a later date for this requirement. Requests for a solicitation will not receive a response. No reimbursement will be made for any costs associated with providing information in response to this announcement and any follow-up information requested. No basis for claim against the Government shall arise as a result of a response to this announcement or Government use of any information provided. This announcement does not restrict the Government to an ultimate acquisition strategy. The Government reserves the right to consider acquisition strategies as deemed appropriate. Submittal of information is requested via electronic mail only to Maggie Bevis, Contract Specialist, maggie.g.bevis.civ@army.mil, no later than the responses date listed above. Reference the sources sought number in the subject line of the e-mail and on all enclosed documents. Information and materials submitted in response to this request WILL NOT be returned. DO NOT SUBMIT CLASSIFIED MATERIAL.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

No documents available.

Lifecycle

  1. 1
    Version 1Sources SoughtCurrent

    Sources Sought for Overhaul/Repair/Upgrade of the UH-60/AH-64 T700 Turbine Engine Supervisory Control Unit

    Notice 918f37f99de44a6d8aac416c4c27df86 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
SOURCES SOUGHT W58RGZ-27-B-A008 UH-60 Starter, Engine Hydraulic OVERHAUL INTRODUCTION The U.S. Army Contracting Command-Redstone Arsenal (W58RGZ-27-B-A008) ATTN: CCAM-AVA-B, Building 5303, Martin Road Redstone Arsenal, AL 35898-5280 (US) is issuing this Sources Sought as a means of conducting market research to identify potential sources having an interest and industry technologies available to support/provide inspection and overhaul of the Starter, Engine Hydraulic, Input/ Output NSN 2995-01-079-9316, Part number: 70651-03210-101. The result of this market research will contribute to determining the method of procurement if a requirement materializes. Based on the responses to this Sources Sought notice/market research, this requirement may be set aside for small businesses (in full or in part) or procured through full and open competition. Multiple awards may be made. All small business set-aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding submissions. DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. REQUIRED CAPABILITIES The Government requires that contractors be able to provide all services, facilities, labor, parts, materials, equipment, tools, and data necessary to accomplish the inspection and overhaul for the Starter, Engine Hydraulic, Input/Output NSN 2995-01-079-9316, Part number 70651-03210-101 and to return the items to condition code A as defined by Army Regulation 725-50. Upon completion of the overhaul, the items shall be packaged and shipped to the required destination(s). The Starter, Engine Hydraulic, is a non- Critical Safety Item. A DMWR is available. SPECIAL REQUIREMENTS The Government requires that contractors have a plan to meet all the Government’s special tooling and test equipment requirements with either: 1. Physical possession of the required tools, 2. Confirmed requisitions for the required tools, 3. Confirmed arrangements for subcontracting the processes requiring the special tools, or 4. Specific plans describing their technical approach to develop equivalent tools. 5. The special equipment includes the following: Installation & Removal Tool (P/N RF9812DW), Installation & Removal Tool (P/N RF9816DW) Lockring Removal Tool (P/N RF9812LPD) Lockring Removal Tool (P/N RF9816LPD) Fixture, Removal, Bearing (P/N T-180570) Adapter, Power Arm (P/N T-181246) Shield, Valve Face (P/N T-210297) Tongs (P/N T-215351) Plate, Bearing Removal (P/N T-228563) Plate, Bearing Removal (P/N T-232286) Fixture, Assembly (P/N T-232794) Guide, Locator, Pin (P/N T-232860) Ring, Split (P/N T-232863) Driver (P/N T-232865) Adapter, Drive (P/N T-237011) Driver (P/N T-237013) Rod, Guide Motor Hyd (P/N T-237121) Adapter, Bearing (P/N T-237776) Fixture, Holding (P/N T-237778) Ring, Retaining (P/N T-300325) Ring, Bearing Retaining (P/N T-300327) Driver, Bearing, Motor (P/N T-300326) Ring (P/N T-300328) Plate, Bearing Removal (P/N T-300329) Fixture, Holding (P/N T-300330) Driver, Shaft, Motor (P/N T-300331) Mandrel, Loading Mot (P/N T-300332) Driver, Shaft Seal (P/N T-300661) Guide (P/N T-500964) Driver (P/N T-500965) Fixture, Holding (P/N TES-7734) Fixture, Holding, Hyd (P/N TES-7830) Positioner, Mechanical (P/N Model 301) Fixture, Aircraft Maintenance (P/N T-246396) Assembly Tool (P/N 93059-T) Gage, Ring (P/N T-400983) Gage, Ring, Plain (P/N T-400982) Spindle, Air Gage (P/N T-400981) Slot Gauge (P/N T-232741) Tool, Alignment, Fixture (P/N T-246993) Fixture Assembly, Mo (2 required) (P/N TES-7736) 6. Identify special processes, test procedures, and/or instructions Examination of Product, External Leakage, Break-In Run: WP 0016 Inlet Proof Pressure Test: WP 0017 Outlet and Case Proof Pressure Test: WP 0018 Overrunning Speed Test: WP 0019 Anti-Cavitation Test: WP 0020 High Speed Cylinder Block Lift Test: WP 0021 Low-Speed Cylinder Block Lift Test: WP 0022 Performance Test: WP 0023 ELIGIBILITY The applicable NAICS code for this requirement is 336412 with a Small Business Size Standard of 1500 employees. The Product Service Code (PSC) is 2995. The DMWR for this requirement is DMWR 1-2995-235. SUBMISSION DETAILS Interested businesses should submit a brief capabilities statement package (no more than ten 8.5 X 11- i n c h pages, font no smaller than 10 point) demonstrating ability to provide the products/systems listed in this Technical Description. Documentation should be in bullet format. No phone or email solicitations with regards to the status of the RFP will be accepted prior to its release. Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted to the Contract Specialist, Brenda Nelson in either Microsoft Word or Portable Document Format (PDF), via email Brenda.nelson.civ@army.mil no later than 5:00 p.m. Central Time on 12 November 2026 and reference the solicitation number in the subject line of the e-mail and on all enclosed documents. Information and materials submitted in response to this request WILL NOT be returned. DO NOT SUBMIT CLASSIFIED MATERIAL. If your organization has the potential capacity to provide the required products/systems, please provide the following information: 1) Organization name, address, primary points of contact (POCs) and their email address, Web site address, telephone number, and type of ownership for the organization; and 2) Tailored capability statements addressing the requirements of this notice, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government.
89%
Pre-Solicitation11/12/2026
NSN in: 2995 014601334 NSN out: 2995 016523514 FFP Repair and Upgrade NOMEN: VALVE, ASSEMBLY, ANTI
86%
Solicitation11/20/2026
Firm-Fixed Price Input NSN: 2995 015014998 Input PN: 3505300-9-1 Output NSN: 2995 016767405 Output PN: 3505300-10 Nomenclature: STARTER,ENGINE,GAS QTY: 3
84%
Solicitation11/03/2026
77%
Solicitation11/09/2026
This solicitation will replace solicitation SPE4A7-26-T-2892. NSN: 2995-013492352, PR: 7009118297, Item: Starter, Engine, Air Turbine, Part Number: 36E165-2QC. FOB at Origin and inspection/acceptance at Origin. Higher level quality system required. Delivery: 141 days ARO to the designated location. Unrestricted acquisition applies. Other than full and open competition applies. A request for proposal (RFP) will be solicited for award of a firm fixed price contract for a quantity of 5 each. It is anticipated that an award will be made against the OEM’s Basic Ordering Agreement (BOA); however, a copy of the solicitation will be made available upon request. The solicitation issue date will be on or about November 13, 2026. The closing date will be on or about December 13, 2026. If an offer submitted to the solicitation is over $900,000, a subcontracting plan will be required with the offer. If an offer submitted to the solicitation is over $10,000,000, certified cost and pricing data and a subcontracting plan will be required with the offer. In order to receive an award, regardless of dollar value, you must be registered in SAM. SAM registration is at https://sam.gov/. Alternate offerors must submit a source approval request (SAR) package along with a completed copy of the solicitation in order to be considered for award. If time does not permit evaluation of SAR packages, the alternate offer will not be reviewed for this procurement but, if approved, will be considered for future procurements. The final contract award decision may be based upon a combination of price, past performance and other evaluation factors as described in the solicitation utilizing the Supplier Performance Risk System (SPRS). Point of contact for this procurement is Huy Nguyen, phone 804-512-8468, or e-mail Huy.Nguyen@dla.mil.
72%
Pre-Solicitation11/13/2026

Additional Details

Solicitation Number

W58RGZ-27-R-A016

Archive Date

Nov 19, 2026

Office Address

REDSTONE ARSENAL, AL, 35898-0000