GovChime
Notice ID: 74aed81b42ef4dedb7eb7b00e4e92a5fSolicitation

Furniture Removal/Design/Installation for the Court Services and Offender Supervision Agency

Archived on April 1, 2023. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
11:00 PM UTC−05:00
Posted
February 16, 2023
Notice type
Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
337214: Office Furniture (except Wood) Manufacturing
Agency
Court Services and Offender Supervision Agency

Notice details

Office
COURT SERVICES OFFENDER SUPV AGCY
Place of performance
Washington, DC, 20004
Last updated
Dec 4, 2025

Identifiers

Solicitation number
9594CS23Q0010
Notice ID
74aed81b42ef4dedb7eb7b00e4e92a5f

Description

Amendment 0002 provides a revised solicitation section C, Statement of Work, responses to all questions received, and changes the quote due date. Amendment 0001 adds information for a site visit and due date for all questions. The Contractor is to relocate Kimball office furniture at 601 Indiana Ave, NW, Washington, DC, 20004, it 1230 Taylor St., NW, Washington, DC, 20011 and 633 Indiana Ave, NW, Washington, DC, 20004, purchasing only additional furniture components/parts required to complete the re-instalaltion of the current furniture. The existing Kimball furniture located at 601 Indiana Ave, NW is currently covered under the original manufacturer warranty, CSOSA requires a local Kimball authorized dealer (i.e., local to Washington DC) to perform the work identified in the solicitation Statement of Work to maintain the manufacturer warranty.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:9594CS23Q0010
  1. Pre-Solicitation
  2. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. Pre-SolicitationFeb 1, 2023

    Furniture Removal/Design/Installation for the Court Services and Offender Supervision Agency

    Notice 2bb766f1dab345c3928b669d89aac72d on SAM.gov

  2. 3×
    SolicitationCurrentFeb 4, 2023

    Furniture Removal/Design/Installation for the Court Services and Offender Supervision Agency

    Notice 74aed81b42ef4dedb7eb7b00e4e92a5f on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
U.S. Department of State Charlotte Cameron CameronCR@state.gov Request for Information ONLY U.S. Department of State-Sources Sought for Overseas Systems Furniture GENERAL INFORMATION This Sources Sought Notice is issued to identify U.S. small business concerns having an interest in and capability to provide the products and services described below. Responses will be considered in selecting the acquisition strategy, to include determining the appropriateness of setting aside this acquisition for any one of the small business programs described in Federal Acquisition Regulation (FAR) Part 19. All information contained in this notice is preliminary in nature and is subject to change. This notice is issued solely for information and planning purposes and does not constitute a Request for Proposals (RFP), Request for Quotations (RFQ), Invitation for Bids (IFB), or a commitment on the part of the government to conduct a solicitation in the future. All information provided is strictly voluntary and no reimbursement will be made by the Government for any costs associated with providing a response to this notice or otherwise participating in market research activities. Further, the US Department of State offers no assurance that a solicitation will result from this notice. Any information submitted will become the property of the Government and will not be returned. Proprietary information, if any, should be minimized and must be clearly marked. REQUIRED PRODUCTS AND SERVICES The U.S. Department of State (DOS), Bureau of Overseas Buildings operations (OBO) is seeking U.S. Small Businesses who can produce and supply System Furniture with 110, 220, 240 – 250 volt capability under the North American Industry Classification System (NAICS) code 337214 (Office Furniture (except wood) Manufacturing) (SIN 71 under GSA). Do not respond to this announcement if your firm is not considered a small business by SBA standards under NAICS code 337214. Current size standard is 1,000 employees or less, refer to http://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf. The Contractor shall provide high quality, low maintenance systems furniture that can adapt, with minimal effort, as the facility evolves. Individual components and all assemblies shall break down for ease of inspection. Furniture shall have a modern appearance, with finish options at various grade levels. It shall include both panel based and freestanding furniture systems. Systems furniture shall utilize a spine wall for power and telecommunications distribution and include integrated lighting, storage and technology support, as well as ergonomic and adjustable height features. All electrical and telecommunications components and infrastructure shall be integrated and flush with the spine wall and panels. INDUSTRY STANDARDS & TESTING Must meet full UL 1286 rating at 250V/50Hz and 125V/60Hz. See Below for details of Draft SOW as furniture is to be used overseas at our Post and Embassies. RESPONSES Responses should be limited to 10 pages or less and be submitted as a Microsoft Word Document or Portable Document Format (PDF). Font must be Times New Roman, 12 point font, with margins of 1 inch all around. No responses shall be accepted via US Mail or FAX. Responses are only being solicited from Small Business concerns. Firms should provide the following information: - Contractor's statement of interest and capabilities statement. - Relevant experience to include experience in performing efforts of similar value, size, and scope within the last five years including contract number, indication of whether your firm acted as a prime or subcontractor, contract value, Government/Agency point of contact and current telephone number, and a brief description of how the contract relates to the technical requirements described herein. Submissions should include responses to the following categories: - Company Profile, to include name, POC, email address and phone number: - DUNS Number - Cage Code - Number of Employees - Office Location - Small Business Designation/Status Claimed - Annual Revenue - SAM Registration - Please state if you are certified under HUBZone Program, Woman-Owned Small Business Program, Service- Disabled Veteran-Owned Small Business Program, and Small Disadvantaged Business Program, Individual feedback or evaluations will not be provided to prospective offerors regarding their submissions. Telephone inquiries will not be accepted nor acknowledged. Questions, if any, must be directed in writing to Charlotte Cameron at CameronCR@state.gov Prospective offerors interested in responding to this notice should submit information electronically to CameronCR@state.gov no later than 5:00 P.M. E.T. on January 11, 2024. DRAFT STATEMENT OF WORK as of January 4th 2024 WORKSTATIONS Must have the ability to provide both systems furniture, utilizing a fixed spine wall, and freestanding furniture Panels Panels shall have the ability to accept structural stacking elements. Heights shall start at 42” and shall have stacking capability to increase height. Tile finish options shall include paint, tackable or acoustical, wood, vinyl, marker board, safety/plexi-glass and pass through. All glass products or alternate glass products must be shatterproof. Fixed central spine must be self-supporting, without requiring perpendicular panel supports for a minimum run of 24’-0”. Fixed central spine must have the ability to accommodate electrical and telecommunication requirements detailed in section 15 of this, RFP, maximum 8 workstation capacity. Panels shall allow for a full range of panel mounted components at varying heights. Trim, filler components and all exposed panel ends shall be covered with hard surface finished trim. All hardware to be included. Panels shall accommodate hanging components on either side of panel frame, without requiring load balancing. Tool/accessory rail option to be flush mounted in panel frame with option for paper trays, vertical organizers, shelves, pencil tray, binder bins and divisional sorters. Worksurfaces Work surface lengths shall align with panel widths and span 60” unsupported. Work surface thickness shall not exceed 1 ¾”. Privacy screens in full and partial height shall be removable and interchangeable in the field. All work surface components shall be non-handed, finished on all sides and shall accept a modesty panel. Modesty panel shall be removable in the field. Finish options shall include at a minimum, wood veneer and plastic laminate and paint. For plastic laminate finish, manufacturers must disclose construction type (i.e., HPL or LPL/Melamine). All edges shall be finished with square edges. Edge banding or solid veneer edge shall be fully integrated and match worksurface finish. Integrated height adjustable work surface located at (or perpendicular to) spine wall with extended height range adjustability 27”- 48”. 220V and 110V power options, UL listed and NEMA 6-20R or 5-20R plug. No converters or pneumatic cylinders accepted. Storage Storage components at a minimum must include: wardrobe, adjustable shelving, open and enclosed cabinet with adjustable shelving, credenza, and file pedestal. Shelving and storage units must be fully accessible from a seated position. Finish options shall include, at a minimum, wood veneer, plastic laminate, and paint. Pedestals Mobile, fixed and freestanding, file pedestal options shall be available as box/box/file and file/ file. Freestanding file pedestals shall have full extension drawers and counter balance weights. Finishes shall include, at a minimum, wood veneer, plastic laminate, and paint and include an option for an upholstered seat. Pedestals shall be available in various depths to align with work surface depths. Drawers shall have anti-rebound safety mechanism and leveling glides. Drawers shall accommodate letter and legal filing capabilities and all required accessories included. Pencil drawer shall be provided. Keying Individual components (wardrobe, files pedestals for each workstation shall be keyed alike, with master keys provided. Ergonomic Capability Articulating Keyboard Tray with pneumatic assist and rotation Single and dual monitor arm (options of triple monitor) support with grommet and clamp mounted options PRIVATE OFFICE Private Office Casegoods with the following key attributes: modular work wall unit featuring a height adjustable desk, storage and a freestanding meeting table. Work Wall Wall panels, wood veneer finish with vertical or horizontal wood grain. Mounted shelf, wood veneer finish with horizontal wood grain, square edge, integrated linear LED light. Wall mounted tack boards, wrapped fabric. Height Adjustable Desk Wood veneer with solid wood edge Extended height range adjustability 27”- 48”. 220V and 110V power options, UL listed and NEMA 6-20R or 5-20R plug. No converters or pneumatic cylinders accepted. Concealed table legs within the base pedestal box file units. Standard dimensions 30”D x 78”W x 1.5”Thick, with other dimensions available. Storage Storage components must include: wardrobe, adjustable shelving and file pedestal. Pedestals shall be available in various depths to align with work surface depths. Drawers shall have anti-rebound safety mechanism and leveling glides. Drawers shall accommodate letter and legal filing capabilities and all required accessories included. Wood veneer with solid wood edge. Freestanding Table Oval or rectangular table with 4 star base and lockable casters Standard dimensions 30”W x 48”L x 28.7”H x 1.5”Thick, with other dimensions available. Wood veneer with solid wood edge ELECTRICAL & TELECOMMUNICATIONS REQUIREMENTS – SYSTEMS FURNITURE Electrical and Telecommunications with international electrical capability System shall include the following capabilities: Accommodate both 250V/50Hz and 125V/60Hz Maintain separate distribution for electrical and telecommunications cables, at 60% max fill ratio Accessible cable trays and raceways for both freestanding and panel based workstations Pathways capable of accommodating up to 4 telecom cables per work station Integrated wire management system below and above work surface Flush mounted power receptacles and data faceplates in the following configurations: (2) duplex electrical receptacles above the work surface (2) duplex electrical receptacles below the work surface located along the base (2) telecom faceplates below the work surface (2) telecom faceplates above the work surface Telecommunications – Pathways & Connections Pathway within furniture supporting both electrical and telecommunications cabling must be minimally sized as 2” wide by 7” high and include a ferrous barrier to separate power and telecommunications cables. Base telecom cable raceway must include a minimum of 2.5” of pathway height and 2” of pathway width to comply with cable bend radius requirements. “Whip” conduits are utilized to connect telecom cables from the wall to systems furniture. A one inch (1”) conduit pathway connecting to system furniture will support a maximum of eight (8) telecom cables. Two (2) recessed, integrated telecommunication faceplates shall be required for each workstation. Faceplates located on each side of a single panel or spine shall be offset from one another. One (1) telecom faceplate configured with four (4) CAT 6 jacks in compliance with the ANSI/TIA/EIA T-568A wiring scheme One (1) telecom quad faceplate configured with four (4) CAT 6 jacks in compliance with the ANSI/TIA/EIA T-568A wiring scheme and two (2) 50/125 SC fiber connectors Electrical – Raceway & Wiring Configuration Design Reference E0803-C01.01: Refer to E090402 Building Electrical Distribution for electrical distribution associated with modular furniture.) Electrical cable raceway requires a minimum of 2.5 inches of pathway height and 2.0 inches of pathway width to comply with cabling requirements. Receptacle configuration for all furniture must be provided with host country utilization voltages. For 220/230/240V/50Hz installations receptacles shall utilize NEMA 6-20R receptacles, UL rated at 250V/50Hz. For 110/120V/60Hz installations receptacles shall utilize NEMA 5-20R receptacles, UL rated at 125V/60Hz. Electrical configuration shall utilize a 4+4+2 wiring: Four (4) 20-AMP circuits, non-directional 10 wire configuration: four hots, four neutrals (12 AWG), two grounds. An alternate 4+2+2 wiring configuration may be considered for specific projects: Four (4)20-AMP circuits, non-directional 8 wire configuration: four hots, two neutrals (10 AWG, 35A rated), two grounds. Power must be factory assembled UL rated wiring harness (in-feed or whip) to connect the power. INDUSTRY STANDARDS & TESTING Must meet full UL 1286 rating at 250V/50Hz and 125V/60Hz. REFERENCES Manufacturer shall submit a history of similar production quantities with on time results and with 220V/50Hz product supplied for overseas installation. Provide performance evaluations, references and contact information for at least three (3) projects with 220V/50Hz product supplied for installation overseas within the last three (3) years (attachment A). DEALER DESIGNATION Manufacturer shall designate a local dealer for furniture specification and project management support. Provide the following information on designated dealer: Dealer team members and their respective resumes, to include a Team Leader, Systems Furniture Specialist and all other professionals who will perform work on Department of State projects. Dealer technical capability, capacity and flexibility to perform on multiple simultaneous projects. Dealer facility and team member clearance levels, issue date and expiration date, issued by the U.S. Department of State, Bureau of Diplomatic Security. Dealers without active security clearances will not be disqualified if they meet or exceed all other requirements however, if designated dealer does not obtain required clearances by the end of the first contract year, they will not be considered for awards. Dealer’s history of similar project work with on time results and multiple simultaneous projects. Provide performance evaluations, references and contact information for at least three (3) projects in the past five (5) years with a minimum of 50 workstations and at least one project with over 200 workstations. Dealer Cage code and DUNS number. U.S. Department of State Charlotte Cameron CameronCR@state.gov Request for Information ONLY U.S. Department of State-Sources Sought for Overseas Systems Furniture GENERAL INFORMATION This Sources Sought Notice is issued to identify U.S. small business concerns having an interest in and capability to provide the products and services described below. Responses will be considered in selecting the acquisition strategy, to include determining the appropriateness of setting aside this acquisition for any one of the small business programs described in Federal Acquisition Regulation (FAR) Part 19. All information contained in this notice is preliminary in nature and is subject to change. This notice is issued solely for information and planning purposes and does not constitute a Request for Proposals (RFP), Request for Quotations (RFQ), Invitation for Bids (IFB), or a commitment on the part of the government to conduct a solicitation in the future. All information provided is strictly voluntary and no reimbursement will be made by the Government for any costs associated with providing a response to this notice or otherwise participating in market research activities. Further, the US Department of State offers no assurance that a solicitation will result from this notice. Any information submitted will become the property of the Government and will not be returned. Proprietary information, if any, should be minimized and must be clearly marked. REQUIRED PRODUCTS AND SERVICES The U.S. Department of State (DOS), Bureau of Overseas Buildings operations (OBO) is seeking U.S. Small Businesses who can produce and supply System Furniture with 110, 220, 240 – 250 volt capability under the North American Industry Classification System (NAICS) code 337214 (Office Furniture (except wood) Manufacturing) (SIN 71 under GSA). Do not respond to this announcement if your firm is not considered a small business by SBA standards under NAICS code 337214. Current size standard is 1,000 employees or less, refer to http://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf. The Contractor shall provide high quality, low maintenance systems furniture that can adapt, with minimal effort, as the facility evolves. Individual components and all assemblies shall break down for ease of inspection. Furniture shall have a modern appearance, with finish options at various grade levels. It shall include both panel based and freestanding furniture systems. Systems furniture shall utilize a spine wall for power and telecommunications distribution and include integrated lighting, storage and technology support, as well as ergonomic and adjustable height features. All electrical and telecommunications components and infrastructure shall be integrated and flush with the spine wall and panels. INDUSTRY STANDARDS & TESTING Must meet full UL 1286 rating at 250V/50Hz and 125V/60Hz. See Below for details of Draft SOW as furniture is to be used overseas at our Post and Embassies. RESPONSES Responses should be limited to 10 pages or less and be submitted as a Microsoft Word Document or Portable Document Format (PDF). Font must be Times New Roman, 12 point font, with margins of 1 inch all around. No responses shall be accepted via US Mail or FAX. Responses are only being solicited from Small Business concerns. Firms should provide the following information: - Contractor's statement of interest and capabilities statement. - Relevant experience to include experience in performing efforts of similar value, size, and scope within the last five years including contract number, indication of whether your firm acted as a prime or subcontractor, contract value, Government/Agency point of contact and current telephone number, and a brief description of how the contract relates to the technical requirements described herein. Submissions should include responses to the following categories: - Company Profile, to include name, POC, email address and phone number: - DUNS Number - Cage Code - Number of Employees - Office Location - Small Business Designation/Status Claimed - Annual Revenue - SAM Registration - Please state if you are certified under HUBZone Program, Woman-Owned Small Business Program, Service- Disabled Veteran-Owned Small Business Program, and Small Disadvantaged Business Program, Individual feedback or evaluations will not be provided to prospective offerors regarding their submissions. Telephone inquiries will not be accepted nor acknowledged. Questions, if any, must be directed in writing to Charlotte Cameron at CameronCR@state.gov Prospective offerors interested in responding to this notice should submit information electronically to CameronCR@state.gov no later than 5:00 P.M. E.T. on January 11, 2024. DRAFT STATEMENT OF WORK as of January 4th 2024 WORKSTATIONS Must have the ability to provide both systems furniture, utilizing a fixed spine wall, and freestanding furniture Panels Panels shall have the ability to accept structural stacking elements. Heights shall start at 42” and shall have stacking capability to increase height. Tile finish options shall include paint, tackable or acoustical, wood, vinyl, marker board, safety/plexi-glass and pass through. All glass products or alternate glass products must be shatterproof. Fixed central spine must be self-supporting, without requiring perpendicular panel supports for a minimum run of 24’-0”. Fixed central spine must have the ability to accommodate electrical and telecommunication requirements detailed in section 15 of this, RFP, maximum 8 workstation capacity. Panels shall allow for a full range of panel mounted components at varying heights. Trim, filler components and all exposed panel ends shall be covered with hard surface finished trim. All hardware to be included. Panels shall accommodate hanging components on either side of panel frame, without requiring load balancing. Tool/accessory rail option to be flush mounted in panel frame with option for paper trays, vertical organizers, shelves, pencil tray, binder bins and divisional sorters. Worksurfaces Work surface lengths shall align with panel widths and span 60” unsupported. Work surface thickness shall not exceed 1 ¾”. Privacy screens in full and partial height shall be removable and interchangeable in the field. All work surface components shall be non-handed, finished on all sides and shall accept a modesty panel. Modesty panel shall be removable in the field. Finish options shall include wood and laminate, at a minimum. All edges shall be finished with square edges. Edge banding shall be fully integrated and matching work surface. Integrated height adjustable work surface located at (or perpendicular to) spine wall with extended height range adjustability 27”- 48”. 220V and 110V power options, UL listed and NEMA 6-20R or 5-20R plug. No converters or pneumatic cylinders accepted. Storage Storage components at a minimum must include: wardrobe, adjustable shelving, open and enclosed cabinet with adjustable shelving, credenza, and file pedestal. Shelving and storage units must be fully accessible from a seated position. Finish options shall include, at a minimum, wood veneer, plastic laminate, and paint. Pedestals Mobile, fixed and freestanding, file pedestal options shall be available as box/box/file and file/ file. Freestanding file pedestals shall have full extension drawers and counter balance weights. Finishes shall include, at a minimum, wood veneer, plastic laminate, and paint and include an option for an upholstered seat. Pedestals shall be available in various depths to align with work surface depths. Drawers shall have anti-rebound safety mechanism and leveling glides. Drawers shall accommodate letter and legal filing capabilities and all required accessories included. Pencil drawer shall be provided. Keying Individual components (wardrobe, files pedestals for each workstation shall be keyed alike, with master keys provided. Ergonomic Capability Articulating Keyboard Tray with pneumatic assist and rotation Single and dual monitor arm (options of triple monitor) support with grommet and clamp mounted options PRIVATE OFFICE Private Office Casegoods with the following key attributes: modular work wall unit featuring a height adjustable desk, storage and a freestanding meeting table. Work Wall Wall panels, wood veneer finish with vertical or horizontal wood grain. Mounted shelf, wood veneer finish with horizontal wood grain, square edge, integrated linear LED light. Wall mounted tack boards, wrapped fabric. Height Adjustable Desk Wood veneer with solid wood edge Extended height range adjustability 27”- 48”. 220V and 110V power options, UL listed and NEMA 6-20R or 5-20R plug. No converters or pneumatic cylinders accepted. Concealed table legs within the base pedestal box file units. Standard dimensions 30”D x 78”W x 1.5”Thick, with other dimensions available. Storage Storage components must include: wardrobe, adjustable shelving and file pedestal. Pedestals shall be available in various depths to align with work surface depths. Drawers shall have anti-rebound safety mechanism and leveling glides. Drawers shall accommodate letter and legal filing capabilities and all required accessories included. Wood veneer with solid wood edge. Freestanding Table Oval or rectangular table with 4 star base and lockable casters Standard dimensions 30”W x 48”L x 28.7”H x 1.5”Thick, with other dimensions available. Wood veneer with solid wood edge ELECTRICAL & TELECOMMUNICATIONS REQUIREMENTS – SYSTEMS FURNITURE Electrical and Telecommunications with international electrical capability System shall include the following capabilities: Accommodate both 250V/50Hz and 125V/60Hz Maintain separate distribution for electrical and telecommunications cables, at 60% max fill ratio Accessible cable trays and raceways for both freestanding and panel based workstations Pathways capable of accommodating up to 4 telecom cables per work station Integrated wire management system below and above work surface Flush mounted power receptacles and data faceplates in the following configurations: (2) duplex electrical receptacles above the work surface (2) duplex electrical receptacles below the work surface located along the base (2) telecom faceplates below the work surface (2) telecom faceplates above the work surface Telecommunications – Pathways & Connections Pathway within furniture supporting both electrical and telecommunications cabling must be minimally sized as 2” wide by 7” high and include a ferrous barrier to separate power and telecommunications cables. Base telecom cable raceway must include a minimum of 2.5” of pathway height and 2” of pathway width to comply with cable bend radius requirements. “Whip” conduits are utilized to connect telecom cables from the wall to systems furniture. A one inch (1”) conduit pathway connecting to system furniture will support a maximum of eight (8) telecom cables. Two (2) recessed, integrated telecommunication faceplates shall be required for each workstation. Faceplates located on each side of a single panel or spine shall be offset from one another. One (1) telecom faceplate configured with four (4) CAT 6 jacks in compliance with the ANSI/TIA/EIA T-568A wiring scheme One (1) telecom quad faceplate configured with four (4) CAT 6 jacks in compliance with the ANSI/TIA/EIA T-568A wiring scheme and two (2) 50/125 SC fiber connectors Electrical – Raceway & Wiring Configuration Design Reference E0803-C01.01: Refer to E090402 Building Electrical Distribution for electrical distribution associated with modular furniture.) Electrical cable raceway requires a minimum of 2.5 inches of pathway height and 2.0 inches of pathway width to comply with cabling requirements. Receptacle configuration for all furniture must be provided with host country utilization voltages. For 220/230/240V/50Hz installations receptacles shall utilize NEMA 6-20R receptacles, UL rated at 250V/50Hz. For 110/120V/60Hz installations receptacles shall utilize NEMA 5-20R receptacles, UL rated at 125V/60Hz. Electrical configuration shall utilize a 4+4+2 wiring: Four (4) 20-AMP circuits, non-directional 10 wire configuration: four hots, four neutrals (12 AWG), two grounds. An alternate 4+2+2 wiring configuration may be considered for specific projects: Four (4)20-AMP circuits, non-directional 8 wire configuration: four hots, two neutrals (10 AWG, 35A rated), two grounds. Power must be factory assembled UL rated wiring harness (in-feed or whip) to connect the power. INDUSTRY STANDARDS & TESTING Must meet full UL 1286 rating at 250V/50Hz and 125V/60Hz. REFERENCES Manufacturer shall submit a history of similar production quantities with on time results and with 220V/50Hz product supplied for overseas installation. Provide performance evaluations, references and contact information for at least three (3) projects with 220V/50Hz product supplied for installation overseas within the last three (3) years (attachment A). DEALER DESIGNATION Manufacturer shall designate a local dealer for furniture specification and project management support. Provide the following information on designated dealer: Dealer team members and their respective resumes, to include a Team Leader, Systems Furniture Specialist and all other professionals who will perform work on Department of State projects. Dealer technical capability, capacity and flexibility to perform on multiple simultaneous projects. Dealer facility and team member clearance levels, issue date and expiration date, issued by the U.S. Department of State, Bureau of Diplomatic Security. Dealers without active security clearances will not be disqualified if they meet or exceed all other requirements however, if designated dealer does not obtain required clearances by the end of the first contract year, they will not be considered for awards. Dealer’s history of similar project work with on time results and multiple simultaneous projects. Provide performance evaluations, references and contact information for at least three (3) projects in the past five (5) years with a minimum of 50 workstations and at least one project with over 200 workstations. Dealer Cage code and DUNS number.
-Market Research01/11/2024
The Department of Homeland Security, Federal Emergency Management Agency, Region 6, awarded Purchase Order No. 70FBR626P00000015 to Winsted Federal LLC on September 28, 2026, in the amount of $172,401.80. The award is for the procurement, delivery, assembly, installation, and configuration of Watch Control Room consoles, chairs, conference table, and related furniture at the FEMA Region 6 Federal Regional Center in Denton, Texas. The contractor will also relocate designated existing furniture and remove associated packaging and debris. This award is a firm-fixed-price purchase order.
-AwardedOpen
19AQMM24Q0123 and 19AQMM24Q0123 P00001-US Department of State Please open and read all attachments. Questions due July 29, 2024. RFQ Submissions due August 29, 2024. Contracting Officer: Charlotte R. Cameron CameronCR@state.gov Charleston, SC Department of State Overseas Building Operations CONDENSED DESCRIPTION. READ ALL ATTACHMENTS INCLUDING SOW AND FULL SOLICITATION 19AQMM24Q0123 The Department of State, Bureau of Overseas Buildings Operations (OBO) has a requirement to provide systems furniture in diplomatic facilities worldwide. Department of State facilities are unique in their security requirements, infrastructure delivery and extended life cycle. SCOPE The Contractor shall provide high quality, low maintenance systems furniture that can adapt, with minimal effort, as the facility evolves. Individual components and all assemblies shall break down for ease of inspection. Furniture shall have a modern appearance, with finish options at various grade levels. It shall include both panel based and freestanding furniture systems. Systems furniture shall utilize a spine wall for power and telecommunications distribution and include integrated lighting, storage, and technology support, as well as ergonomic and adjustable height features. All electrical and telecommunications components and infrastructure shall be integrated and flush with the spine wall and panels. CONTRACT The Department of State intends to award a Blanket Purchase Agreement (BPA) against a GSA schedule. The term of this contract will be one year with four one-year options to renew.
-Solicitation08/29/2024
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 12639527Q0007 is issued as a Request for Quotation (RFQ) for New Office Furniture The office is requesting the purchase of new furniture to replace broken and old furniture. The awarded Contractor shall provide furniture as outlined in this SOW. Location of work to be performed will be the 2202 Monterey Street, Suite 102B, Fresno, California 93721. The total space footage is approximately 1,305.69 sf. Space identified includes four offices, conference room, and reception/flex room/printing room. Contractor is responsible for delivery and assembly only of items specified in Attachment 2. Removal and disposal of existing furniture will be performed by building staff and is not part of the Contractor’s responsibilities. This request is strictly for furniture. There is no electrical work, IT installation, or telecommunications installation involved. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 337214 Office Furniture (Except Wood) Manufacturing. The small business size standard is 1,100 Employees This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency. ***10/14/2026 - SOW Correction - Correct SOW uploaded. ***10/15/2026 - NAICS correction in Description to correct 337214 NAICS Office Furniture (Except Wood) Manufacturing ***10/15/2026 - SOW Correction - SOW Correction to item placement. ***10/16/2026 - Attachment 1 - Removal of Brand Name Provision- Included in error. Not applicable to RFQ. ***10/16/2026 - Questions and Answers final document has been added. Questions and Answers time is now officially closed. ***11/10/2026 - Requeest for Quotation (RFQ) 12639527Q0007 has been canceled. The government is currently re-evaluating its acquisition strategy and specifications for this requirement. Potentional quoters are advised to monitor SAM.gov for any future notices or re-solicitations.****
-Combined Synopsis10/23/2026
UPDATED 06 NOV 2026 -SOLICITATION AMENDMENT 02 The purpose of Amendment 0002 is strictly administrative in nature to incorporate the Past Performance Questionnaire (PPQ) and the Questions and Answers (Q&A) Matrix- Template, which were inadvertently omitted from the previous package upload. Offerors are advised that all vendor questions submitted via email in accordance with solicitation instructions remain under government review and will be formally addressed in a subsequent response; the release of these attachments does not alter or supersede pending inquiries. Except as provided herein, all terms, conditions, specifications, and requirements of the solicitation remain unchanged and in full force and effect. UPDATED: 30 OCT 2026 - SOLICITATION AMENDMENT 01 The 410th Contract Support Brigade (CSB) – Regional Contracting Office (RCO) Miami hereby issues AMENDED Solicitation No. W91QEX-27-Q-A001 01 for the acquisition of a Firm-Fixed-Price (FFP) contract action supporting the United States Southern Command (SOUTHCOM) and the USSOUTHCOM Joint Task Force – Western Hemisphere (JTF-WHEM). The Government requires a complete turnkey solution to modernize two (2) operational workspaces with modular ergonomic workstations and supporting office furniture. The resulting contract requires the awardee to provide all project management, design services, pre-installation site surveys, freight and delivery, removal and disposal of existing furniture, assembly, installation, and final acceptance testing. All proposed pricing must be fully inclusive of all freight, labor, materials, and services required to deliver fully operational workspaces. Work is distributed across two (2) primary operational areas with the following targets: • Room 1 – JPG: Propose a room layout to accommodate and furnish at least 35 workstations (planning target: approximately 35). • Room 2 – POD: Propose a room layout to accommodate and furnish at least approximately 35 workstations (planning target: approximately 35). Submissions must demonstrate compliance with all ergonomic, design, and operational specifications outlined in the Statement of work (SOW). NOTE: Please note that the previously issued Sources Sought notice was conducted for market-research and planning purposes only. It was not a solicitation, request for proposal, request for quotation, or commitment by the Government to award a contract. The solicitation is a separate procurement action and is the controlling document for this requirement. Vendors should rely on the solicitation, including all attachments, amendments, and formally issued questions and answers, when preparing a response. Information submitted in response to the Sources Sought does not replace, satisfy, or carry forward as a response to the solicitation. Interested vendors must submit a complete response in accordance with the solicitation’s stated instructions and deadline. Any questions concerning the solicitation should be submitted through the method identified in the solicitation. ________________________________________________________________________________________________________ The 410th Contract Support Brigade (CSB) – Regional Contracting Office (RCO) Miami hereby issues Solicitation No. W91QEX-27-Q-A001 for the acquisition of a Firm-Fixed-Price (FFP) contract action supporting the United States Southern Command (SOUTHCOM) and the USSOUTHCOM Joint Task Force – Western Hemisphere (JTF-WHEM). The Government requires a complete turnkey solution to modernize three (3) operational workspaces with modular ergonomic workstations and supporting office furniture. The resulting contract requires the awardee to provide all project management, design services, pre-installation site surveys, freight and delivery, removal and disposal of existing furniture, assembly, installation, and final acceptance testing. All proposed pricing must be fully inclusive of all freight, labor, materials, and services required to deliver fully operational workspaces. Work is distributed across three (3) primary operational areas with the following targets: • Room 1 – JPG: Propose a room layout to accommodate and furnish at least 35 workstations (planning target: approximately 35). • Room 2 – POD: Propose a room layout to accommodate and furnish at least approximately 35 workstations (planning target: approximately 35). Submissions must demonstrate compliance with all ergonomic, design, and operational specifications outlined in the Statement of work (SOW).
-Solicitation11/23/2026

Additional Details

Solicitation Number

9594CS23Q0010

Archive Date

Apr 1, 2023

Office Address

WASHINGTON, DC, 20004