GovChime
Notice ID: a07c80e9cd07415aa21e78e665241be2Sources SoughtArchived

F-16 Aircraft Seat HUD Monitor (ASHM) for United States Air Force (USAF)

Archived on January 24, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
4:55 PM MST
Posted
December 9, 2025
Notice type
Sources Sought
Set-aside
No Set aside used
NAICS
811210: Electronic and Precision Equipment Repair and Maintenance
Agency
Department of WarDepartment of the Air Force

Notice details

Office
AIR FORCE MATERIEL COMMAND.AIR FORCE SUSTAINMENT CENTER.FA8251 AFSC PZABB
Place of performance
S SALT LAKE, Utah
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
FA8251-26-D-ASHM
Notice ID
a07c80e9cd07415aa21e78e665241be2

Description

1. NOTICE: This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources for information and planning purposes only.  This sources sought is seeking Contractors who can manufacture or perform repair of the F-16 Aircraft Seat HUD Monitor (ASHM).

1.1. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources with the capability to repair the part listed below and to assist in determining if this effort can be competitive and/or a total Small Business Set-Aside.  

The proposed North American Industry Classification Systems (NAICS) Code is 811210 which has a corresponding Small Business Association size standard of $34.0M for Electronic and Precision Equipment Repair and Maintenance services.  The Government will use this information to determine the best acquisition strategy for this engineering service.  The Government is interested in all small businesses to include 8(a), Service-Disabled Veteran-Owned, Hubzone, and Women-Owned small business concerns.  

The government requests that interested parties respond to this notice, if applicable, and identify your small business status to the identified NAICS code.  Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years.  Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners.

1.2 Responses to this Sources Sought announcement are voluntary, and therefore, the U.S. Government is not liable to pay or reimburse any contractors which respond to this announcement.  Any costs incurred by interested companies in response to this announcement are solely the responsibility of the responder.  The Government does NOT intend to contract on the basis of this request or otherwise pay for any information solicited herein and the Government reserves the right to reject, in whole or in part, any contractor’s input resulting from this Sources Sought. 

1.3  In accordance with Federal Acquisition Regulation (FAR 15.201 (e), a response to this notice is not an offer and cannot be accepted by the government to form a binding contract,  Responders are solely responsible for all expenses associated with their response.   Not responding to this inquiry does not preclude participation in any future request for Proposal (RFP), if issued.  If a solicitation is released, it will be publicized in accordance with the requirements of the FAR. 

2. PROGRAM DETAILS:

National Stock Number: 1270-01-514-2683

Part Number: 46431110-30

Name: ASHM

INSTRUCTION:

1. Provide relevant experience to include performing engineering, manufacturing, inspection, and testing of similar components to those listed above in the last 3 years. 

2. Company Profile will include the following:

  1. Number of employees
  2. Office Location
  3. CAGE Code
  4. DUNS Number
  5. Small Business designation/status claimed

3. No reimbursement will be made for any costs associated with providing information in response to this synopsis or any follow up information requests.  The Government has no technical data to provide to potential offerors. Offerors must possess access to all appropriate data required to redesign these items. US Government does not own or have the rights to use the data required to redesign these items. Interested offerors shall respond to this Source Sought Synopsis no later than Friday 9 January 2026 at 4:55PM MST. 

4.  Interested offerors must be qualified to repair these items within 3 years of the closing date of this Sources Sought Synopsis in order to be considered for this requirement.

5.  Questions regarding this market survey should be addressed to Veronika Pett at veronika.pett@us.af.mil or Adriana Perez-Mares at adriana.perez-mares@us.af.mil

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (1)

  • Repair Qualification Requirements (RQR) - ASHM 2683.pdf

    934 KBAdded in Sources Sought version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Sources SoughtArchivedCurrent

    F-16 Aircraft Seat HUD Monitor (ASHM) for United States Air Force (USAF)

    Notice a07c80e9cd07415aa21e78e665241be2 on SAM.gov

  2. 6
    Version 6PresolicitationArchived

    Type changed from Sources Sought to Presolicitation

    F-16 Aircraft Seat HUD Monitor (ASHM) for United States Air Force (USAF)

    Notice 98cc4d8bf3a540529da79f1131fb5dd3 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Sole source award to BAE for F-16 Transducer repair.
-AwardedOpen
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5998-01-598-5645 & NSN: 5998-01-598-5644 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): NORTHROP GRUMMAN SYSTEMS CORPORATION CAGE: 1L4J7 ADDRESS: 1740 Wehrle DR Buffalo, New York 14221-7032, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 120 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development.
-Market Research12/07/2026
Notice Type: Sources Sought Synopsis 1. Notice This is not a solicitation, but rather a Sources Sought Synopsis to determine potential sources. This request is for information and planning purposes only. The purpose of this Sources Sought Synopsis is to conduct market research to determine if responsible sources exist; to assist in determining if this effort can be competitive, and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 811210, which has a corresponding Size standard of $34M in average annual receipts. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all small businesses to include 8(a) Small Business Development Programs, Service-Disabled Veteran- Owned, Historically Under-utilized Business Zone(s) (HUBZone), and Women-Owned small business concerns. The Government requests that interested parties respond to this notice and identify your small business status relative to the identified NAICS code above. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. 2. Description Requirement Name: Repair of NSN: 5840-01-659-4499 For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. The Government does not own the data or the rights to the software/data needed to purchase/repair this part through additional sources. It has been determined to be uneconomical to buy the data or rights to the data. It is uneconomical to reverse engineer the part. Original Equipment Manufacturer (OEM): APPLIED SYSTEMS ENGINEERING INC CAGE: 3Z966 ADDRESS: 7510 Benbrook PKWY Benbrook, Texas 76126-2112, United States 3. Statement: Authority: 10 U.S.C. 2304(C)(1), Justification: Supplies required are available from only one or a limited number of responsible sources and no other type of supplies will satisfy agency requirements. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique engineering skills, and repair knowledge by the qualified source(s) require repair of the part by the approved source(s). The approved source(s) retain repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify IAW the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The Government does not own the technical data to provide contractors for qualification. 4. Anticipated Procurement Details Contract Type: Firm-Fixed Price (FFP) Period of Performance: 320 Days ARO 5. Capability Statement Submission Requirements Interested parties possessing the requisite capabilities are invited to submit a Capability Statement addressing the criteria outlined below. Business Information: Provide the following business information for your company: Company Name Address Point of Contact CAGE Code Phone Number E-mail Address Web Page Address Specify whether your company is a U.S. or foreign-owned firm Recommended North American Industry Classification System (NAICS Code) if other than 811210 Based on the above NAICS code, state whether your company is a small business and provide additional information regarding the type of small business (women-owned, small- disadvantaged, HUB Zone, etc.). Potential Offeror Capabilities: What is your experience in providing the capability to accomplish the objective/requirements listed above? Include contract numbers, a brief description of the work performed, period of performance, agency/organization supported, and individual points of contact (Contracting Officers or Program Managers). Provide pricing data, to include historical pricing data if available. How would the prime contractor account for government furnished property (GFP) in the possession of the prime, and all sub-contractors? Does your company currently have any teaming agreements in place that will allow for successfully meeting the Government's requirements? In addition, please identify the roles associated with the teaming arrangement. Discuss any documents or data you will require to complete the objectives listed above, and briefly explain their purpose. What are the top five risks you see in accomplishing this effort? How long would it take you to submit a proposal? Provide other relevant topics, concerns, or information not addressed in this posting. 6. Response Procedures Submission Format: Electronic format only (PDF preferred) Page Limit: Submissions must not exceed five (5) pages Due Date & Time: In accordance with (IAW) the date published on SAM.GOV Delivery Method: Submit via email to the points of contact on SAM.GOV 7. Disclaimer This is a Sources Sought Synopsis (SSS) issued in accordance with FAR Part 10 (Market Research) and FAR 15 (Contracting by Negotiation). This notice does not constitute a Request for Proposal (RFP), Request for Quotation (RFQ), or Invitation for Bid (IFB). Nothing in this document shall be construed as a commitment by the Government to issue a solicitation or ultimately award a contract. The Government will not pay for any information submitted in response to this notice, nor will it reimburse any costs incurred by interested parties in preparing or submitting responses. All information received in response to this notice marked "Proprietary" will be handled accordingly. The Government reserves the right to use non-proprietary information provided in market research reports, acquisition strategy determinations, and procurement development.
-Market Research12/07/2026
NOTICE TYPE: Pre-Solicitation; Proposed Sole Source Contract Action SOLE SOURCE AUTHORITY: RFO FAR 6.103-1 Only one responsible source and no other supplies or services will satisfy agency requirements (See attached J&A for approval). The Department of the Air Force (USAF) hereby publicizes its intent to solicit, negotiate and award a sole-source, Five (5) Year Indefinite Delivery, Indefinite Quantity (IDIQ), Firm-Fixed-Price (FFP) contract to Applied System Engineering, Inc. (ASE) (CAGE: 3Z966), located at 7510 Benbrook Parkway Fort Worth, Texas 76126 for the repair of various Transmitters. This acquisition is being conducted under the authority of RFO FAR 6.103-1 (Only one responsible source and no other supplies or services will satisfy agency requirements). Applied System Engineering, Inc. (ASE) (CAGE: 3Z966) is the original equipment manufacturer (OEM) and the only source with the proprietary technical data, specialized tooling, and engineering expertise required to perform these services without causing unacceptable delays or duplication of costs. SCOPE OF WORK: For the end item, the contractor shall furnish all facilities, parts, materials, equipment and services required to inspect and, if necessary, restore to serviceable condition. TEST, TEARDOWN, AND EVALUATION (TT&E): The contractor shall perform visual, mechanical and electrical testing of the end item, reusable or replacement component parts, and materials according to the schedule in the contract to determine the condition of the end item. Upon completion of this task, all of the components of the end item requiring repair or replacement will be identified by part number, NSN (if applicable), nomenclature, and location in the assembly. This information will be reported in writing to the Procurement Contracting Officer (PCO)/ Defense Contract Management Agency (DCMA) Administrative Contracting Officer (ACO) and, if necessary, approval to repair will be negotiated. If no further repair is required, the asset must be returned in serviceable like new condition. REPAIR: The contractor shall perform the repair or replacement of all failed parts and components. Each end item must be cleaned, configured, refinished, and tested to meet the original specifications of the end item. The end item shall be returned in serviceable like new condition. Item Description(s), National Stock Number(s) (NSNs), and Part Number(s): Transmitter, Radar (AN/MST-T1(V) MINI-MUTES) 5840-01-475-2319 63804-1H Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-644-8215 105103-1 Transmitter, Radar (AN/TPT-T1 Unmanned Threat Emitter) 5840-01-505-2519 74501-1 Transmitter, Radar (AN/TPT-T1 Unmanned Threat Emitter) 5840-01-508-1032 75502-2 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-656-4618 125606-2 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-657-1845 101702-1 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-657-1847 115206-3 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-657-1848 115306-2 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-657-2806 103802-1 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-659-0850 91101-01 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-659-2542 91101-2 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-659-4499 91102-1 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-659-4500 91102-2 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-659-3010 91103-1 Transmitter, Radar (AN/TPT-T1 Unmanned Threat Emitter) 5840-01-617-0146 62704-1 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-598-6408 87001-2 Transmitter, Radar (AN/TSQ-T10 Joint Threat Emitter) 5840-01-599-9081 79106-1 This notice is not a request for competitive proposals or quotes; however, all responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Any capability statements received within 15 calendar days of publication of this notice will be evaluated solely to determine whether to conduct a competitive acquisition. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. This pre-solicitation is notice for a Sole Source Solicitation, which will be issued later this year. The entire solicitation and any/all attachments will be made available only on the SAM.gov website. All current and future information about this acquisition, i.e. solicitation, amendments, purchase specifications, and Q&A's will be distributed through SAM.gov. Interested parties are responsible for monitoring this site to ensure they have the most up-to-date information about this solicitation. One or more of the items under this acquisition are subject to Free Trade Agreements. IAW DAFMAN 16-201, there are no restrictions on foreign participation.
-Pre-Solicitation11/05/2026
The purpose of this requirement is for HMIT Test Stand Support on a 3 year BPA Sole Source.
-Solicitation11/18/2026

Additional Details

Solicitation Number

FA8251-26-D-ASHM

Archive Date

Jan 24, 2026

Office Address

HILL AFB, UT, 84056-5825