Inspect and Re-Babbitt Thrust Shoes for Richard B. Russell Powerhouse
Overview
- Response deadline
- 2:00 PM EST
- Posted
- November 20, 2026
- Notice type
- Sources Sought
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION SOUTH ATLANTIC.ENDIST MOBILE.W074 ENDIST MOBILE
- Last updated
- Nov 20, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W9127827RA017
- Notice ID
- a65ec01c5bab47db97310df0c2694630
Description
Solicitation Number: W9127827RA017
PSC: PSC J031 — Maintenance/Repair/Rebuild of Equipment: Bearings
Primary NAICS: 332710 — Machine Shops[PT1]
Title / Subject: Inspect and Re-Babbitt Thrust Shoes for Richard B. Russell Powerhouse, Elberton, GA, Army Corps of Engineers
This is Market Research and Sources Sought Notice only. This Sources Sought Notice is not to be construed as a commitment by the U.S. Army Corps of Engineers (USACE), Mobile District to issue a solicitation or ultimately award a contract.
As part of market research, this Sources Sought notice is to determine whether an adequate number of qualified, interested vendors exist that can provide the required goods and services required. Additionally, USACE intends to surveil the market to determine the availability of qualified small business contractors to perform these services and to determine socioeconomic classifications (Small Business, HUBZone, Service-Disabled Veteran Owned Small Businesses, Women Owned Small Businesses, etc.) associated with each. The primary North American Industrial Classification System (NAICS) Code applicable to this requirement is 332710, the small business standard for which is 500 employees. While 332710 is the primary NAICS, capabilities from firms operating under 333611 or 811310 are also highly encouraged to respond.[PT2] [JW3]
Draft Scope: Market Research and Sources Sought Notice for information on capability and availability of potential contractors interested in proposing on a Firm Fixed Price Contract for inspecting and re-babbitting [PT4] [JW5] a quantity of 20 thrust shoes. The shoe segments are a truncated pie shape with dimensions approximately 19.26 inches long, 23.72 inches wide (at OD), and 13.43 inches wide (at ID). The bearing shoes are 8 inches thick, including a babbitt layer of 0.13 inches. The scope of work consists of:
- Provide round-trip transportation of the thrust shoes between the project and refurbishment facility.
- Perform as-received inspections and document the condition for every shoe.
- Conduct pre-babbitt NDT (visual (VT) and liquid penetrant (PT)) and obtain Government acceptance.
- Remove old babbitt and prepare the shoes.
- Restore the steel backing / backside of the shoes.
- Re-babbitt the running surface of the shoes by pouring new babbitt. The new babbitt metal shall be new material conforming to ASTM B 23 Alloy 2. The tin used for tinning shall be 99 percent pure. Use of reclaimed metal will not be acceptable.
- Restore functional features and final geometry of the shoes.
- Perform final babbitt-bond NDT (ultrasonic test (UT) and liquid penetrant (PT)) of the shoes.
- Final inspection, reporting, and Government release of the shoes.
- Preserve and return the completed shoes.
Responses to this Sources Sought Notice will be used by the government in making appropriate acquisition decisions.
QUESTIONS FOR INDUSTRY & RESPONSE INSTRUCTIONS
Industry feedback is requested as follow:
- On the first page, please indicate whether your firm is interested in providing a quote for this requirement? (Yes / No)
- On the first page, please provide your company’s name, address, Cage code, UEI, primary points of contact (to include telephone number(s) and e-mail address.
- On the first page, please state your business size/classification under NAICS 332710 and any SBA certifications (i.e. any designations such as Small Business, HUBZone, Section 8(a), Service-Disabled Veteran owned Small Business, Small Disadvantaged Business, and Women Owned Small Business) on first page of submission. Veteran-owned firms should state their SBA VetCert status as well.
- Please provide a Capabilities Statement on how the company can provide the services stated within the drafted Scope of work.
- Describe no more than (3) similar projects for like services as described above. Provide the project name, description, location, overall dollar value, date services completed or percentage of completion.
The above requested information shall not exceed a total of eight (8) pages on 8.5" x 11" paper, 12-point Times New Roman font, with a minimum of one (1) inch margins all around.
In the subject line of your email state: Response to Inspect and Re-Babbitt Thrust Shoes for Richard B. Russell Powerhouse, Elberton, GA, Army Corps of Engineers, Savannah District
Responses shall be submitted via email to CTHYDRO-Proposals@usace.army.mil and Phuc (Peter) Dang at Phuc.d.dang@usace.army.mil. Responses are due no later than 12/15/2026, 2:00 p.m. CDT. Responses received after this date and time may not be reviewed.
DISCLAIMER
There is no solicitation available currently; therefore, do not request a copy of the solicitation. Responses to this Sources Sought are not quotes, proposals, or bids on which USACE can issue a contract. The Government does not intend to award a contract based on responses to this Sources Sought. Responders are solely responsible for all expenses associated with responding, and USACE will not pay for information received. Neither unsolicited proposals nor other kinds of offers will be considered in response to this Sources Sought Notice. This Source Sought Notice does not create an obligation on behalf of the Government to make an award of any contract pursuant to this announcement, so do not submit pricing information.
If a solicitation is released, it will be synopsized in accordance with the Federal Acquisition Regulation and its supplements. It is the contractor’s responsibility to monitor the Government Point of Entry for the release of any solicitation.
[PT1]KO concurs that the PSC and NAICS.
[PT2]This language is being introduced to ensure that we do not miss specialty Hydro-turbine repair firms that don’t self -identify primarily as standard “machine shops”. Please get concurrence from the PM prior to release.
[JW3]I concur.
[PT4]To minimize uncertainty, can we provide additional technical details & specifications as contractors cannot accurately determine if they have the capability to respond unless they know the physical scale and specifications of the work. Details to consider adding includes:
Adding Physical Dimensions/Weight: Provide the approximate size (diameter/width), thickness, and estimated weight of each of the 20 thrust shoes.
Specify Babbitt Material & Method: State the required Babbitt alloy (e.g., ASTM B-23 Grade 2 Tin-Based Babbitt) and whether centrifugal/spin casting is required or if static casting is acceptable.
Clarify NDT (Non-Destructive Testing) Requirements: State whether ultrasonic testing (UT) for bond integrity (e.g., per ASTM E114 or ISO 4386) or liquid penetrant testing (PT) is required.
- [JW5]Added physical dimensions. Weight is not listed on the technical drawings.
- Specified babbitt material and method.
- Clarified NDT requirements.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (1)
- Download
Sources Sought (Refurbish Thrust Shoes)V1.pdf
276 KBAdded in Sources Sought version 1Posted
Lifecycle
- 1Version 1Sources SoughtCurrent
Inspect and Re-Babbitt Thrust Shoes for Richard B. Russell Powerhouse
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Additional Details
Solicitation Number
W9127827RA017
Archive Date
Dec 30, 2026
Office Address
MOBILE, AL, 36602-3630