AMARG Wastewater Treatement System and Service
Active, responses due . Full description on SAM.gov.
Overview
- Response deadline
- 1:00 PM MDT
- Posted
- November 3, 2026
- Notice type
- Presolicitation
- Set-aside
- No Set aside used
- NAICS
- 333310: Commercial and Service Industry Machinery Manufacturing
- Agency
- Department of WarDepartment of the Air Force
Notice details
- Office
- AIR COMBAT COMMAND.FA4877 355 CONS PK
- Place of performance
- Tucson, Arizona, 85707
- Last updated
- Nov 3, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- FA487727QA012
- Notice ID
- a83b73040b7b488f92b80a6b45c4baee
Description
The 355th Contracting Squadron intends to award a sole-source, Blanket Purchase Agreement (BPA) to Evoqua Water Technologies LLC, CAGE 72XB4 located at 11147th St Pittsburgh, PA 15201. The anticipate award date is 18 November 2026 with an ordering period of 1 December 2026 – 30 November 2031 for an amount not expected to exceed $70,000.00.
Point of Contact: Patricia Murray, Contracting Officer
355th Contracting Squadron
3180 S. Craycroft Rd B2528
Davis-Monthan AFB, AZ 85707
Email: patricia.murray.6@us.af.mil
Commercial Phone: 520-228-3095
NAICS: 333310 PSC: W046
Description of Supplies/Services:
The requirement includes continuous equipment rental, preventative maintenance (PM), and service of the installed Industrial Wastewater Treatment System supporting industrial operations of paint booths for the 309th Aerospace Maintenance and Regeneration Group (AMARG). This current equipment is provided under a rental agreement and not Government Furnished Property. The proposed contract action will include continuous equipment rental, quarterly preventive maintenance, consumable filter replacements, resin tank exchange/regeneration, and certified hazardous waste transport is required to ensure uninterrupted mission readiness, personnel safety, and regulatory
compliance.
The contractor will provide all necessary personnel, supervision, tools, materials, and equipment required to perform preventative maintenance and repair services as identified in the PWS and IAW OEM equipment rental and servicing standards. Services include but are not limited to
The scope of work includes the following tasks:
- Scheduled Maintenance: The contractor will perform on-site Preventive Maintenance (PM) actions on at least a quarterly basis or as needed based on system usage as specified by the original equipment manufacturer (OEM). This includes, at a minimum, verifying the calibration and proper operation of all differential pressure gauges, flow controllers, switches, and electronic sensors against Original Equipment Manufacturer (OEM) specifications. Replace the system’s pre-filtration media, replace ion exchange tanks, and ensure proper disposal of all Hazardous Materials IAW all applicable waste handling and disposal regulations.
- System Diagnostics and Repair: The contractor will conduct a complete diagnostic inspection of the system and all components to identify the cause of any operational defects. The contractor will execute all necessary repairs to restore the system to its original performance specifications.
This proposed Sole Source action will be awarded following the procedures at RFO 12.201-1(e)(3). The installed system is provided under a rental agreement, and all equipment remains the property of Evoqua Water Technologies LLC, the OEM. Evoqua has not identified any third-party authorized distributors or servicers of their equipment. Market research included internal Government sources and strategic sourcing vehicles; no suitable sources were identified.
Price evaluations found the cost associated with removal of the current system and installation/commissioning of a new system are not reasonably expected to be recovered through competition over the anticipated ordering period. Additionally, such transition efforts have the potential to disrupt paint booth operations, which could result in additional costs to the Government.
Based on these considerations, and the equipment ownership and servicing restrictions, the Contracting Officer has determined, as authorized at RFO 12.102(a), that only one source is reasonably available to provide continued rental and servicing of the installed system. Establishment of a Sole Source BPA with Evoqua Water Technologies, LLC represents the best value and is in the best interest of the Government.
This notice of intent is not a request for competitive quotations or proposals. However, interested parties may provide a capability statement with clear and convincing evidence identifying their ability to support this requirement as identified. Such parties must respond by Friday, 6 November 2026 by 1:00PM MST to Contracting Officer Patricia Murray at email: patricia.murray.6@us.af.mil or phone (520) 228-3095. Responses received will be evaluated; however, a determination by the Government not to compete the proposed action based upon responses is solely within the discretion of the Government.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Files (1)
- Download
Presolicitation_SS_27QA012_IWWT System.pdf
73 KBAdded in Presolicitation version 1Posted
Lifecycle
- 1Version 1PresolicitationCurrent
AMARG Wastewater Treatement System and Service
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Solicitation Synopsis Original Solicitation #: SPRDL1-26-R-0087 New Solicitation #: SPRDL1-27-R-A006 Item: Sensor Gimbal GS207 NSN: 5836-01-556-9112 MFPN: 7002925-7 5 Year Long-Term Contract, IDIQ Guaranteed Minimum Quantity: 43 EA *Guaranteed minimum quantity will be ordered on first delivery order, after award of base contract* Maximum Quantity: 154 Unit of Issue: EA FOB: Destination Delivery: 300 Days After Receipt of Order Place of Performance: CONUS Requirement Type: Firm Fixed Price (FFP) Restricted to: DRS Network & Imaging Systems, LLC (CAGE: 1JNU9) Additional Information (Special/Unique clauses and narratives): There is no TDP associated with this requirement. Engineering Change Proposal (ECP) documents will need to be submitted with the proposal to address obsolete parts. SOLE SOURCE: Offerors providing the part from the OEM (DRS Network & Imaging Systems, LLC), will be required to submit traceability with their proposal in order to be considered. EXPORT CONTROLLED Joint Certification Program (EXPORT CONTROL) You must be certified under the United States/Canada Joint Certification Program (JCP) (https://www.dla.mil/Logistics-Operations/Services/JCP/) to be granted access to the technical data (TDP) for this solicitation, via Contract Opportunities (www.sam.gov). To register, or to re-register, please select the DD Form 2345 link from the Joint Certification Program (JCP) Home page (https://www.dla.mil/Logistics-Operations/Services/JCP/) and follow the instructions for completion, noting the required documentation to submit with the form. Mail the Form 2345, along with the required documentation to to the address is provided on form; it CANNOT be faxed or emailed. The process should take no more than one week for you to be certified or denied for approval under the JCP. If you encounter problems, please contact JCP at 1-877-352-2255 or via email at JCP-ADMIN@DLA.MIL or dlacontactcenter@dla.mil. Your firm must request access to the TDP in Contract Opportunities (www.sam.gov) in addition to submitting the above form in order to be granted access to the TDP. Once these requirements have successfully been completed, you will be granted access to the TDP. If you do not have access to Contract Opportunities, recommend you register as soon as possible. | - | Pre-Solicitation | 11/18/2026 |
DLA Weapons Support - Mechanicsburg considering a solicitation and subsequent award for a five (5)-year Indefinite Delivery Indefinite Quantity (IDIQ) contract for the item described below. DLA is seeing sources capable of supplying the following items: NSN: 4610013195337 - NOM: DESALINATOR, HND, OP - P/N: MROD-35LL1 AMC Code – 3Z 3 - Acquire, for the second or subsequent time, directly from the manufacturer. Z - This part is a commercial/nondevelopmental/off-the-shelf item. Commercial item descriptions, commercial vendor catalog or price lists or commercial manuals assigned a technical manual number apply. DISCLAIMER: This Sources Sought Notice is for informational purposes only. This is NOT a Request for Proposal, Request for Quote, or Invitation for Bid. It does not constitute a solicitation and shall not be construed as a commitment by the Government. Responses in any form are not offers and the Government is under no obligation to award a contract as a result of this announcement. No funds are available to pay for preparation of responses to this announcement. Any information submitted by respondents to this technical description is strictly voluntary. | - | Market Research | 11/17/2026 |
This Request for Proposal (RFP) is for a one-time Firm-Fixed Price definite quantity purchase order. This procurement will be conducted under the procedures in FAR part 15 Contracting by Negotiation. This procurement is being solicited as other than Full and Open. The RFP is for the following Item: Nomenclature: CELL ASSEMBLY, OPTICAL INSTRUMENT NSN: 6650-01-676-1468 Accepted Part Numbers: 6439506-1 6439506 QTY: 80 The Approved Sources are DRS NETWORK & IMAGING SYSTEMS LLC CAGE code: 32865 Part Number 6439506-1 Raytheon Company CAGE code: 96214 Part Number 6439506. The statutory authority permitting other than full and open competition is 10 U.S.C. 3204(a)(1) as implemented by FAR 6.302-1. | - | Solicitation | 12/07/2026 |
ACTUAL IDQ WILL BE IN SOLICITATION ONCE POSTED. ACTUAL NSN's BELOW ARE SUBJECT TO CHANGE AFTER SOLICITATION. 7310-00-238-5163 PAN, STEAM TABLE A-A-50179 Style I, Model A, Size 2 7310-01-464-4587 PAN, STEAM TABLE A-A-50179 Style I, Model A, Size 4 7310-00-834-4482 PAN, STEAM TABLE A-A-50179 Style I, Model A, Size 7 7310-01-107-1140 PAN, STEAM TABLE A-A-50179 Style 1, Model A, Size 8 7310-01-107-1141 PAN, STEAM TABLE A-A-50179 Style I, Model A, Size 9 7310-00-147-2769 PAN, STEAM TABLE A-A-50179 Style 1, Model A, Size 10 7310-00-576-4613 PAN, STEAM TABLE A-A-50179 Style I, Model A, Size 11 7310-00-935-6678 PAN, STEAM TABLE A-A-50179 Style I, Model A, Size 13 7310-00-834-4485 PAN, STEAM TABLE A-A-50179 Style I, Model A, Size 15 7310-00-147-2770 PAN, STEAM TABLE A-A-50179 Style I, Model A, Size 16 7310-00-834-4480 COVER, STEAM TABLE PAN A-A-50179 PARA 3.1.1 FULL SIZED 7310-01-107-1282 COVER, STEAM TABLE PAN A-A-50179 PARA 3.1.1 HALF SIZE LONG 7310-01-419-0228 PAN, STEAM TABLE A-A-50179 Style I, Model B, Size 2 7310-01-390-2620 PAN, STEAM TABLE A-A-50179 Style I, Model B, Size 3 7310-00-835-4897 PAN, STEAM TABLE A-A-50179 Style I, Model B, Size 4 7310-01-547-9808 PAN, STEAM TABLE A-A59793 Type 2, Size 1 7310-01-547-9816 PAN, STEAM TABLE A-A-59793 Type 2, Size 3 7310-01-547-9852 PAN, STEAM TABLE A-A-59793 Type 3, Size 3 7310-01-547-9859 PAN, STEAM TABLE A-A-59793 Type 4, Size 1 7310-01-547-9863 PAN, STEAM TABLE A-A-59793 Type 4, Size 2 7310-01-547-9865 PAN, STEAM TABLE A-A-59793 Type 4, Size 3 | - | Pre-Solicitation | 11/11/2026 |
The Veterans Health Administration (VHA) Non-Expendable Equipment National Program has identified the Combi Oven product line as a candidate for a VA-wide (otherwise referred to as “national”) Requirements contract. Combi Ovens are thermally insulated chambers used in cooking for warming, cooking, and baking food, typically fueled by either natural gas or electricity. Food service ovens have thermostatic controls, which turn the oven on and off and select the temperature at which the oven will operate, and, usually, a timer. Food service ovens may have complex, computer-based controls allowing a wide variety of operating modes. They may be freestanding or countertop units. The Contractor must demonstrate the ability to meet all requirements for the solicitation. The objective is to provide Combi Oven to be used by cooks within the VA medical centers and facilities, Continental United States (CONUS) and Outside the Continental United States (OCONUS). The period of performance is for a base of 12-months with four 12-month option periods. Please see the RFP and attachments for more information. | - | Solicitation | 10/21/2026 |
Additional Details
Solicitation Number
FA487727QA012
Archive Date
Nov 21, 2027
Office Address
DAVIS MONTHAN AFB, AZ, 85707-3522