GovChime
Notice ID: d3ab010f4dd34cafaecd7d9ab1b98a9aSolicitation

RFP-A27-0598 Induction heater with water chiller option

Active, responses due . Full description on SAM.gov.

Overview

Response deadline
4:00 PM CST
Posted
November 9, 2026
Notice type
Solicitation
Set-aside
No Set aside used

Notice details

Office
AMES LABORATORY - DOE CONTRACTOR
Place of performance
Iowa, 50011
Last updated
Nov 9, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
A27-0598
Notice ID
d3ab010f4dd34cafaecd7d9ab1b98a9a

Description

Ames National Laboratory (also referred to as the “Laboratory”), operated by Iowa State University (ISU) under Prime Contract DE-AC02-07CH11358, as amended, with the U.S. Department of Energy (DOE), is seeking to acquire an Induction heater with a water chiller option. Specifications for this system are listed in Appendix C.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (6)

  • Appendix E - Reps and Certs Supplemental.docx

    358 KBAdded in Solicitation version 1Posted
    Download
  • Appendix C - Specifications.pdf

    220 KBAdded in Solicitation version 1Posted
    Download
  • Appendix A - Term and Conditions for FP Commercial Products and Commercial Services dated 3-12-2024.pdf

    739 KBAdded in Solicitation version 1Posted
    Download
  • Appendix D-9 IPP (Commercial Supplies and Services Requiring Delivery of Data).pdf

    176 KBAdded in Solicitation version 1Posted
    Download
  • Appendix B - Work By Contractors at Ames Laboratory - Supplemental Conditions.pdf

    100 KBAdded in Solicitation version 1Posted
    Download
  • RFP A27-0598.pdf

    421 KBAdded in Solicitation version 1Posted
    Download

Lifecycle

  1. 1
    Version 1SolicitationCurrent

    RFP-A27-0598 Induction heater with water chiller option

    Notice d3ab010f4dd34cafaecd7d9ab1b98a9a on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Ames National Laboratory (also referred to as the “Laboratory”), operated by Iowa State University (ISU) under Prime Contract DE-AC02-07CH11358, as amended, with the U.S. Department of Energy (DOE), is seeking to acquire a Two-Zone Tube Furnace Integrated with Glovebox and Purification System. The specifications for this system are listed in Appendix C.
74%
Solicitation12/08/2026
Brand Name or Equal Teledyne Instruments Liquid Syringe Pump - Model 260x Pump Module (P/N: 681240830) - 2 Qty. per attached specifications along with the following items: 1. Continuous flow dual electric valve package (1/8 inch valves) for Syrixus 1000x, 500x and 260x (P/N: 601267015) - 1 Qty. 2. Electric Valve Controller for SyriXus pumps (P/N: 681240854) - 1 Qty. Amendment 0001: The purpose of this amendment is to provide question and answer as attached as of 11/10/2026. All other terms and conditions remain unchanged.
66%
Solicitation11/20/2026
Brand Name or Equal Across International 2R50f Dual-Jacketed Glass Filter Reactor - 110V (2R50f.110) per the attached specifications - 1 Qty.
66%
Solicitation11/25/2026
Brand Name or Equal NETZSCH Dilatometer DIL 502 Expedis Supreme with single measuring system (1 Qty.)
66%
Solicitation11/19/2026
Value Proposition: ThermaSpin, developed by scientists at Los Alamos National Laboratory, provides a reliable, cost-effective way to measure the flow behavior (viscosity) of extremely hot and reactive liquids, such as molten salts and metals, under realistic operating conditions. Unlike existing solutions that are expensive, complex or poorly suited for low-viscosity fluids, this enclosed high-temperature viscometer delivers high sensitivity, small sample requirements and precise atmospheric control, enabling accurate measurements without exposing materials to air or contamination. This capability is critical for industries such as advanced nuclear energy, thermal energy storage and high-temperature materials processing, where fluid properties directly impact system performance, safety and design. By making these measurements more accessible and practical, the ThermaSpin High-Temperature Viscometer reduces development risk, lowers testing costs and accelerates innovation in next-generation energy and industrial systems. The Challenge: Accurately measuring the viscosity of molten salts and other high-temperature liquids is extremely difficult because these materials exist under harsh conditions—temperatures approaching 1,000°C, high chemical reactivity and sensitivity to air and moisture. Traditional measurement techniques often lack the sensitivity needed for these low-viscosity fluids or require specialized, resource-intensive methods that are not widely accessible. In addition, many approaches demand large sample volumes, which can be impractical or hazardous when working with corrosive or toxic materials. Maintaining a controlled environment during testing further complicates measurements, as even minor contamination can alter results. Together, these challenges create a significant barrier to obtaining reliable data on fluid behavior in systems where precise performance understanding is essential. Problems Solved: ThermaSpin High-Temperature Viscometer addresses these challenges by providing a sealed, high-temperature measurement system that can operate reliably in extreme environments while maintaining strict control over sample purity. Its rotational design, coupled with a highly sensitive torsion-based measurement approach, enables accurate detection of the very low forces associated with low-viscosity molten fluids—something conventional instruments struggle to achieve. The enclosed architecture allows operation under inert or controlled atmospheres, preventing contamination from air or moisture, while also supporting smaller sample sizes to reduce risk and material constraints. By integrating temperature resilience, corrosion compatibility and precise mechanical measurement into a single platform, ThermaSpin overcomes the key technical and practical limitations that have historically restricted viscosity characterization in these demanding conditions. Key Advantages: Extreme temperature capability (~1000°C): Reliable operation for molten salts, metals and other high-temperature fluids High sensitivity for low-viscosity liquids: Accurately captures subtle flow behavior that conventional viscometers miss Sealed, controlled environment: Maintains sample purity by preventing exposure to air and moisture Handles corrosive and hazardous materials: Durable design compatible with chemically aggressive substances and smaller sample sizes No specialized infrastructure required: Eliminates dependence on costly, limited-access techniques like neutron imaging Versatile and integration-ready: Adaptable to multiple applications and compatible with inert atmosphere systems (e.g., glove boxes) Market Applications: Advanced Nuclear Energy: Molten salt reactors (MSRs), fusion systems and fuel cycle development Thermal Energy Storage & CSP: High-temperature heat transfer and storage fluids for renewable energy systems Metallurgy & Metal Processing: Molten metal monitoring in refining, casting and advanced manufacturing Chemical Processing: High-temperature and corrosive fluid handling in industrial chemical production Research & Development: National labs, academia and industry studying thermophysical properties of extreme-condition materials Defense & Government Applications: Controlled characterization of hazardous or sensitive molten materials in secure environments Development Status: TRL 3 US Patent pending LA-UR-26-26227 LANL Tech Partnerships: Unlock the Innovative Potential Los Alamos National Laboratory offers a wide range of cutting-edge technologies and capabilities that may provide your company with a competitive edge in the market and unlock the innovative potential that can enhance, refine, and revolutionize your products. LANL’s licensing program focuses on moving inventions developed by our researchers to commercial innovations. Patented and patent pending inventions and copyrighted software are available to existing and start-up companies through exclusive and non-exclusive licensing agreements. For specific discussions, please contact licensing@lanl.gov. Note: This is not a call for external services for the development of this technology. https://www.lanl.gov/engage/collaboration/feynman-center/partner-with-us/licensing-technology m.lanl.gov/tech-search
66%
Special Notice04/01/2027

Additional Details

Solicitation Number

A27-0598

Archive Date

Dec 17, 2026

Office Address

Ames, IA, 50011