Notice ID: 581e6126e1e80806cc47faf55788ffedCombined Synopsis/Solicitation
OVERHEAD ROLLING DOORS
Archived on September 27, 2018. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 4:00 PM UTC−10:00
- Posted
- September 7, 2018
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 332321: Metal Window and Door Manufacturing
- Agency
- Department of CommerceNATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION
Notice details
- Office
- DEPT OF COMMERCE NOAA
- Place of performance
- TED STEVENS MARINE RESEARCH INSTITUTE 17109 PT LENA LOOP, Juneau, AK, 99801
- PSC
- 72: HOUSEHOLD/COMMERC FURNISH/APPLIANCE
- Last updated
- Jan 23, 2026
Identifiers
- Solicitation number
- ABL-18111
- Notice ID
- 581e6126e1e80806cc47faf55788ffed
Description
Please Notice: Only One Door Will Be Selcted........Selection of which door to purchase will be made a time of award. Purchase of multiple doors may be awarded. Vendor will supply all materials and labor for door installation as well as removal and disposal of existing door(s). ***************** This is a combined synopsis/solicitation for services in which the government intends to acquire in accordance with FAR Part 13, Simplified Acquisitions Procedures. Department of Commerce (DOC), National Oceanic & Atmospheric Administration (NOAA), National Marine Fisheries Service (NMFS), Alaska Fisheries Science Center, Auke Bay Laboratories has a requirement FOR OVERHEAD ROLLING DOORS. See attached Statement of Work for more information. All interested concerns must submit a quotation and documentation demonstrating the qualifications to provide services as described above within fifteen (15) days of the publication date of this notice. This announcement constitutes the only solicitation, quotations are being requested and a written solicitation has been issued. A firm-fixed order is anticipated to be issued in within 24 hours of closing date and time. All responses must be in writing and delivery to fax number (907)789-6004 attention to Heather Mahle, email to heather.mahle@noaa.gov, or provide to address indicated in solicitation. Faxed or Emailed Correspondence or Response to Solicitation should reference solicitation # ABL-18111, in the Subject line to ensure it is received successfully. This is a simplified acquisition with an estimated value of less than $150,000.00. The following provisions and clauses shall apply to this solicitation and resultant award. The provisions and clauses may be downloaded at http://www.acqnet.gov/far *** All contractors doing business with this Acquisition Office must be registered and active in the System for Award Management (SAM). No Award can be made unless Cotnractor/Vendor is registered and active in SAM. For additional information visit www.sam.gov. In order to register with SAM and to be eligible to receive an award from this acquisition office, all offerors must have a Dun & Bradstreet Number. A Dun & Bradstreet number may be acquired free of charge by contacting Dun & Bradstreet on-line at www.dnb.com/eupdate or by phone at (800) 333-0505. Official Solicitation, any Amendments, or updates can be found at www.fbo.gov, listed under solicitation # ABL-18111. SPECIFICATIONS Metal Door purchase for Subport Auke Bay Laboratories 250 Egan Drive Juneau, Alaska DELIVERABLE SCHEDULE: Delivery 60 days from date of award. Items offered or quoted must meet or exceed specifications below Vendor to provide two quotes: 1) One 12 x 15 non-insulated door 2) One 12 x 15 insulated door Selection of which door to purchase will be made a time of award. Purchase of multiple doors may be awarded. Vendor will supply all materials and labor for door installation as well as removal and disposal of existing door(s). OFFER TO INCLUDE DELIVERY TO SITE AND INSTALLATION at 250 Egan Drive, Juneau, AK 99801 NOMINAL SPECIFICATIONS: Non Insulated Door Specifications: Curtain: Galvanized Steel Slats, minimum 20 gauge. No windows. Equivalent to Cornell ESD10 or Amarr 4000 series door. Operator: Commercial grade jack shaft opener configured to close when close button is pressed and held. Insulated Door Specifications: Curtain: Galvanized Steel Slats, minimum 24 gauge. No windows. Equivalent to Cornell ESD20 or Amarr 4100 series door. Insulated slats to have nominal R value of 8.0. Operator: Commercial grade jack shaft opener configured to close when close button is pressed and held. This order will not require assignment of a user account and access to DOC data systems. This contractor will not need access to Government hardware, application software, system software, and sensitive data. Suspension of Work and Government Shut Down In the case of a Government Wide Shutdown, this contract/order may be subject to a stop-work order. A stop-work order may be issued by writing by the Contracting Officer or Government Official. In accordance with FAR 42.13 - Suspension of Work, Stop-Work Orders, and Government Delay of Work is also made a part of this Acquisition. NOAA will not make payments to contractors for products or services not obligated before the funding lapse. If a contract or order has been issued and funded and productive work is possible then Contractor may continue to operate under your Contract during Laps on written approval of the contracting officer. However, depending on the duration of a funding lapse, the absence of available Federal employee oversight may lead an agency to reconsider whether the contract or grant activity should continue to be performed. Federal employees will not be available to make timely payments to the contractor or grantee in accordance with the contract. INVOICING In compliance with the Prompt Payment Act, the Financial Management Division will pay an invoice in accordance with the terms set forth in the contracts with vendors if a "proper invoice" is received. Contractor shall invoice for hours worked on a biweekly basis. A "proper invoice" (sample available upon request) includes: 1. Name of the vendor, invoice date, and sequential invoice number; 2. Purchase order number; 3. Description, price and quantity of property and services actually delivered or rendered; 4. Period of work performance invoiced; 4. Payment terms; 5. Other substantiating documentation, for example a waybill for shipping charges if freight is $100 or more, or other information as required by the contract; 6. Name, title, phone number, and complete mailing address of the responsible official to whom payment is to be made. Invoices are to be submitted to: DOC/NOAA/NMFS Auke Bay Laboratories Ted Stevens Marine Research Institute 17109 Point Lena Loop Rd Juneau, AK 99801 FEDERAL, STATE, AND LOCAL TAXES Except as may be otherwise provided in this contract price includes all applicable federal, state, and local taxes and duties in effect on the date of this contract but does not include any taxes from which the Government the Contractor or this transaction is exempt. Upon request of the contractor, the Government shall furnish a tax exemption certificate or similar evidence of exemption with respect to any such tax not included in the contract price pursuant to this clause. For the purpose of this clause, the term "date of this contract" means the date of the contractor's quotation or, if no quotation, the date of this Purchase Order. AWARD CRITERIA Award will be made to lowest price technically acceptable based on above listed specifications SUBMISSION OF QUOTES A response to this Request for Quote by interested parties shall consist of the following: • A quote containing detailed specifications for product offered; • Quote must include shipping FOB destination • Verification that the vendor is registered in SAM and has completed the OnLine Representations and Certifications or has otherwise included completed FAR 52.212-3 Representations and Certifications. All responses to this solicitations sent by email or fax should reference the Solicitation # ABL18111, to ensure proper receipt of your response.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Documents
Select documents to download
Showing 3 of 3 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
ABL-18111_Pictures.zip | Combined Synopsis/Solicitation | NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION | Sep 7, 2018 | - | ||
| Combined Synopsis/Solicitation | NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION | Sep 7, 2018 | - | |||
| Combined Synopsis/Solicitation | NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION | Sep 7, 2018 | - |
Lifecycle
Solicitation:
ABL-18111- Combined Synopsis
- 5×Combined SynopsisCurrentAug 29, 2018
OVERHEAD ROLLING DOORS
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
STATEMENT OF WORK / REQUEST FOR QUOTE A. INTRODUCTION: 1. The Federal Bureau of Prisons (FBOP), FCC Lompoc, 3901 Klein Blvd., Lompoc, CA 93436, is seeking quotes from qualified vendors for the supply and delivery of nine (9) complete fire escape door assemblies, including doors, frames, and all required hardware. The doors are for a prison facility application and must meet all relevant local, state, and federal fire and life safety codes. 2. "Equal or Better" Product Substitution: Proposals must meet or exceed the specified product quality. If an alternative product or component is offered, the vendor must submit all technical documentation, certifications, and test results for consideration. 3. Government's Right of Final Technical Acceptance: The government retains the sole and final authority to determine technical acceptance for all submitted products, based on the provided documentation and compliance with stated standards. B. SCOPE OF WORK: 1. The vendor shall provide all materials as specified below. All components must be new, U.L. Listed or labeled by a recognized testing agency acceptable to the Authority Having Jurisdiction (AHJ) and conform to the standards referenced herein. C. TECHNICAL SPECIFICATIONS: TABLE 1: COMPONENTS: All units shall be identical unless otherwise noted. Component Requirement Quantity 9 Complete Door Assemblies Door Size 36" wide x 80" high x 2" thick Door Material Hollow Metal Door, minimum 12 Gauge galvanneal steel Core Ribbed and Insulated (mineral core for fire rating is acceptable/preferred) Fire Rating Rating must be compatible with the wall's fire resistance rating, typically 75% of the wall's rating. See required fire rating for correctional facilities on Table 2 Handing 4 Left Hand Outswing, 5 Right Hand Outswing. Frame Material Minimum 12 Gauge galvanneal steel, fire-rated and labeled Frame Type Knock-down (KD) for drywall/unit masonry or welded for masonry. Frames are to be prepared for 80 series lock, keyed 2 sides strike, surface pull on both sides and prepped for PA closer. Finish Factory primed for field painting TABLE 2: FIRE RATING: The complete door assembly (door, frame, and all hardware) shall be 90 minutes fire rated. This rating must be compatible with the fire-resistance rating of the specific wall assembly in which the door will be installed, as dictated by the building's fire safety plan and local code requirements. Category Requirement Description Applicable Standards & Agencies Listing & Labeling All components must be listed and labeled by a recognized third-party testing agency acceptable to the Authority Having Jurisdiction (AHJ). Underwriters Laboratories (UL), Intertek (WH), Factory Mutual (FM) Testing Standard Assemblies shall be tested under positive pressure conditions. NFPA 252, ANSI/UL 10C Labeling Visibility A permanent, legible fire rating label must be affixed to both the door and the frame and remain visible after installation for inspection purposes. N/A Code Compliance Vendor must confirm that all components, when installed as an assembly, comply with relevant building and safety codes for correctional facilities (Group I-3 Occupancies, IBC). NFPA 80 (Standard for Fire Doors and Other Opening Protectives) International Building Code (IBC) TABLE 3: HARDWARE SPECIFICATIONS: All hardware must be "listed" or "labeled" for use on a fire-rated assembly, compatible with the specified fire rating, and factory-prepped for ANSI/BHMA Grade 1 standards. Item Requirement Quantity per Door Notes Hinges Heavy-duty steel ball bearing hinges, UL Listed 3 Exit Device Panic Hardware/Fire Exit Hardware (rim or mortise type) self-latching 1 set Must be a crossbar or touch bar device, operable with an applied force of 15 lbs or less. Locking Must be openable from the egress side at all times without special knowledge or tools. Keyed access from the exterior is permitted. 1 set 80 series lock, keyed 2 sides strike, surface pull on both sides and prepped for PA closer. Door Closer Heavy-duty, adjustable, surface-mounted, UL Listed 1 unit Must be self-closing and ensure positive latching. Seals Smoke and draft control gasketing/seals 1 set Required for a complete smoke-rated assembly. Threshold [Specify if required, e.g., 1/2" beveled aluminum, non-combustible] 1 unit (if required) D. CODE AND STANDARD REQUIREMENTS: 1. All supplied materials and the complete assembly must comply with the latest editions of the following codes and standards (or local equivalents as adopted by the AHJ): NFPA 80: Standard for Fire Doors and Other Opening Protectives NFPA 101: Life Safety Code International Building Code (IBC) International Fire Code (IFC) OSHA requirements for exit routes UL 10C or NFPA 252: Standard for positive pressure fire testing of door assemblies UL 1784: Standard for Air Leakage Tests of Door Assemblies (if smoke rating is required) 2. Vendors must confirm that all components, when installed as an assembly, will bear a permanent, legible label from a recognized third-party testing agency (e.g., UL, Intertek/WH, FM). E. SUBMISSION REQUIREMENTS: 1. Itemized pricing for doors, frames, hardware, and any included accessories. 2. Proposed lead time for manufacturing and delivery to FCC Lompoc 3. Confirmation of compliance with all referenced codes and standards. 4. Cut sheets/product data for all proposed items. F. DELIVERY OF MATERIALS: 1. Deliveries shipped directly to FCC LOMPOC can only be received between 7:30 a.m. and 2:00 p.m., Monday through Friday, excluding Federal Holidays. 2. POC: Mr. Fernando Pena, BOP Engineering Technician, FXPena@bop.gov, or 805-735-2771 3. FBOP will be responsible for receiving or signing deliveries. 4. FCC LOMPOC will provide resources for loading and unloading materials or equipment upon arrival. | - | Combined Synopsis | 11/16/2026 |
Proposed procurement for NSN 5340014107057 CLEVIS,ROD END: Line 0001 Qty 38 UI EA Deliver To: By: 0113 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 1. The Guaranteed Minimum quantity will be 5. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically. | - | Combined Synopsis | 11/23/2026 |
THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE. To be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation) **Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement. Must identify and provide information to contracting officer on bid during solicitation period** Please read the contract in its entirety. If you are able to provide a quote be sure to provide the following information in the sections provided below: Page 1 BLK 17a. Provide Contractor's info and cage code. Section A. A1 – 1. Enter The Contractor's POC Section B. – Enter your Quote and any other info we should know. Please quote FOB Destination BREMERTON, WA. Section B. K21 – Check the appropriate box and provide the Manufacturer’s Name, Address and the Country of Manufacturing Section F. – Provide the Lead Time and/or Delivery Date. Section K. - 52.204-24 (d)(1) and (2) Check the applicable boxes Section K. - 52.209-11 (b)(1) and (2) Check the applicable boxes Page 1 - Read box 28 and sign boxes 30 a, b, and c. Return the signed and filled out solicitation with your quote by SUNDAY, 28 SEPTEMBER 2025 7AM FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL. EMAIL: karl.lindley@dla.mil Please be advised that all communications regarding this requirement are governed by the Procurement Integrity Act. In accordance with FAR 3.104, no proprietary bid information, pricing data, or source selection-sensitive metrics may be exchanged or solicited outside of authorized contracting channels. Thank you for your cooperation in maintaining a fair and ethical procurement process." | - | Solicitation | 11/09/2026 |
Proposed procurement for NSN 5999014355968 CONTACT ASSEMBLY,ELECT: Line 0001 Qty 652 UI EA Deliver To: DLA DISTRIBUTION WARNER ROBINS By: 0408 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: DLA DISTRIBUTION WARNER ROBINS By: 0210 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically. | - | Combined Synopsis | 11/16/2026 |
The U.S. Army Corps of Engineers, Memphis District has a requirement for garage doors. The solicitation number is W912EQ27QA006 and is being issued as a Request for Quote (RFQ). This is a total small business set-aside procurement. The associated NAICS code is 332321. Response to this solicitation must be received via email by date and time indicated on solicitation; regardless of method of delivery, it is the offerors responsibility to ensure receipt of quote by the time and date stated therein. Quotes should be marked with solicitation number W912EQ27QA006 addressed to Rochelle Ross, Phone (901) 544-3619, email: Rochelle.Ross@usace.army.mil or Kirk A. Middleton, Phone (901) 544-0786, Kirk.A.Middleton@usace.army.mil. Vendors not registered in System for Award Management Registration (SAM) database prior to award will not be eligible for award. Vendors may register for SAM by registering online at www.sam.gov. In accordance with FAR 52.204-7, all vendors shall be registered in System for Award Management (SAM) prior to award, during performance and through final payment of any contract. North American Industry Classification System (NAICS) Code applicable (332321) to this acquisition must be in vendors SAM registration. | - | Solicitation | 12/16/2026 |
Additional Details
Solicitation Number
ABL-18111
Archive Date
Sep 27, 2018
Office Address
KANSAS CITY, MO, 64106