GovChime
Notice ID: afda0f976f53487d8a25e7a06ec119f5Sources Sought

Manufacturing of AUMA Actuators for Allegheny River Lock and Dam 4

Responses closed . Full description on SAM.gov.

Overview

Response deadline
8:00 AM EDT
Posted
April 30, 2026
Notice type
Sources Sought
NAICS
333995: Fluid Power Cylinder and Actuator Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION GREAT LAKES AND OHIO.ENDIST PITTSBURGH.W072 ENDIST PITTSBURGH
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W911WN26Q1BN0
Notice ID
afda0f976f53487d8a25e7a06ec119f5

Description

DescriptionThe US Army Corps of Engineers (USACE), Pittsburgh District intends to award a sole source purchase order to AUMA Actuators, Inc., under the authority of Revolutionary FAR Overhaul (RFO) 12.102(a), restricting competition for acquisitions valued at or below the simplified acquisition threshold (SAT). This requirement is for sixteen (16) new actuators at Allegheny River Lock and Dam Four (4). Sole Source Justification The requirement is needed to replace all sixteen (16) AUMA actuators used for operating the filling and emptying valves in the single chamber at Lock and Dam No. 4 on the Allegheny River.AUMA shall manufacture sixteen SAR10.2/AC01.2 multi-turn electric actuators with remote mount actuator control units. These units must be functional equivalents to the original AUMA SA10.1-108 previously supplied to the project.A full Justification and Approval has been prepared in accordance with agency procedures and will be available upon request. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES However interested parties may identify their interest and capability to fulfill this requirement by submitting a capability statement no later than 27 April 2026 to the point of contact listed below.SUBMISSION AND CONTACT INFORMATION Responses must include Company name, UEI number, CAGE code, point of contact information, and a detailed capability statement addressing the requirement. Disclaimer Determination by the Government not to compete this proposed contract action based on responses to this notice is solely within the discretion of the Government.This notice is in accordance with RFO 5.101 and RFO 5.201 and fulfills the requirement for publicizing proposed contract actions.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Lifecycle

  1. 1
    Version 1Sources SoughtCurrent

    Manufacturing of AUMA Actuators for Allegheny River Lock and Dam 4

    Notice afda0f976f53487d8a25e7a06ec119f5 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Interested vendors are asked to please fill out the solicitation form titled W911WN26QA056. All questions should be emailed to isaiah.m.johnson@usace.army.mil. All questions will be answered in the form of a solicitation amendment. UPDATE 8/10/26 Please see Attachments 1a and 1b for pictures of the current actuators on site.
-Solicitation08/13/2026
The US Army Corps of Engineers, Pittsburgh District, is looking for a manufacturer to provide gate valve actuators. Please see document with specifications below. If your company is interested, please email the contract specialist, Isaiah Johnson, a capability statement for your company at isaiah.m.johnson@usace.army.mil.
-Market Research07/23/2026
The US Army Corps of Engineers intends to award the Kerry Company, Inc. with a purchase order to remanufacture the Miter Gate Actuators of Locks 4 and 5 on the Allegheny River. The contractor shall remanufacture both actuators simultaneously to their new and improved design. This contract does not include any modifications or improvements performed on the Cardanic Ring.The work includes disassembly of the motors, electrical testing and inspection of all components for wear and damage, steam cleaning, bake-out, sandblasting of required components, reassembly with two new bearings per actuator, final electrical testing, and painting. The contractor shall provide and install valve kits, approximately 60 gallons of food-grade hydraulic oil, re-hone the cylinders, furnish new pistons with updated seal designs, furnish new glands with updated seal designs, and provide complete seal kits for both the cylinders and hydraulic power units.The contractor shall sandblast and repaint the actuators using Macropoxy 646 at a dry film thickness of 4.0 to 6.0 mils, followed by an Acrolon 218 HS topcoat at a dry film thickness of 2.0 to 4.0 mils in the original factory color. The work also includes repair and re-chroming of the thrust rods, replacement of two bronze bushings in each cylinder trunnion, and furnishing stainless-steel tubing, fittings, and hardware as required.Additional components to be furnished and installed include a quick-disconnect manifold, reservoir end plate, two pressure tubes, two suction strainers, a P3AAN3040 bi-rotational hydraulic gear pump, and a complete set of pump-to-motor couplings and spider assemblies.THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES However interested parties may identify their interest and capability to fulfill this requirement by submitting a capability statement no later than 07 July 2026 to the point of contact listed below.SUBMISSION AND CONTACT INFORMATION Responses must include Company name, UEI number, CAGE code, point of contact information, and a detailed capability statement addressing the requirement. DisclaimerDetermination by the Government not to compete this proposed contract action based on responses to this notice is solely within the discretion of the Government.This notice is in accordance with 41 U.S.C. 3304(a)(1) and fulfills the requirement for publicizing proposed contract actions.
-Sole Source / J&AOpen
Nickajack Lock Hydraulic Cylinder Replacement
-Solicitation08/19/2026
*************** PIEE SYSTEM IS EXPERIENCING TECHNICAL DIFICULTIES. IF YOU CANNOT SUBMIT YOUR QUOTES THROUGH THE PIEE SYSTEM. PLEASE EMAIL THEM TO MATTHEW RHOADS- MATTHEW.T.RHOADS@USACE.ARMY.MIL AND DOMENIC SESTITO - DOMENIC.L.SESTITO@USACE.ARMY.MIL********************************* This Solicitation, W912BU26QA007, is issued as a Request for Quotation (RFQ), per the below: The intent of this procurement action is to procure a replacement Pentair Aurora Model 423 fire pump for the Dredge McFARLAND. This pump is a direct OEM replacement for the existing pump. Non-OEM replacement pumps are not acceptable. Delivery: The pump shall be delivered to the destination within 20 weeks of the contract award date. Solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06, published 26 August 2025. Clauses and Provisions are available online at www.acquisition.gov. This solicitation is set aside 100% for small business under NAICS Code 333998 - All Other Miscellaneous General Purpose Machinery Manufacturing, the small business size standard is 700 employees. Quotes shall be submitted through PIEE no later than 2:00 PM EST on Tuesday, 20 January 2026. Quotes shall include pricing information, vendor CAGE code, and Unique Entity identification number (UEI). All vendors must be registered and active in SAM.gov. Please contact the Contract Specialist, Matthew Rhoads, at Matthew.T.Rhoads@usace.army.mil for questions regarding this Solicitation. Award will be made based on the lowest quote meeting the technical requirements.
-Solicitation01/20/2026

Additional Details

Solicitation Number

W911WN26Q1BN0

Archive Date

Apr 30, 2027

Office Address

PITTSBURGH, PA, 15222-4198