GovChime
Notice ID: 62cfc4d02ac090118764a8ad22988a79Combined Synopsis/Solicitation

Brand name or equal Cropscan 3000H

Archived on June 7, 2016. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
9:30 PM UTC+02:00
Posted
May 10, 2016
Notice type
Combined Synopsis/Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
333111: Farm Machinery and Equipment Manufacturing
Agency
Department of AgricultureAGRICULTURAL RESEARCH SERVICE

Notice details

Office
USDA ARS PWA AAO ACQ/PER PROP
Place of performance
ROOM 243 JOHNSON HALL, WSU, Pullman, 99164
PSC
37: AGRICULTURAL MACHINERY AND EQPT
Last updated
Dec 5, 2025

Identifiers

Solicitation number
AG-0521-S-16-0006
Notice ID
62cfc4d02ac090118764a8ad22988a79

Description

USDA, ARS, Pullman, WA has a Brand Name or Equal requirement. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation is attached. The solicitation number is AG-0521-S-16-0006 and is issued as a request for quotation (RFQ). The acquisition is a 100% Small Business Set-Aside. The NAICS code is 333111, business size standard is 1250. This solicitation document incorporates those provisions and clauses in effect through Federal Acquisition Circular 2005-87. The Government intends to issue a firm-fixed price service contract for this requirement. The product that the USDA is attempting to procure is three (3) Cropscan 3000H units manufactured by NIR Technology Systems. This product was chosen specifically because it is the only known model where the sensor is located in the cab and away from vibrations, temperature variations, dust, and water. The CropScan 3000H On Combine Whole Grain Analyzer is the only make and model we have found where the light readings from each sample are collected through a fiber optic cable and transmitted to the NIT spectrometer located inside the cabin, converted to % protein, % oil and % moisture, and displayed on a Touch Screen PC in the cabin. Also, the spectrum range for crops is wide for the CropScan 3000H On Combine Whole Grain Analyzer (720-1100nm). Also the CropScan 3000H On Combine Whole Grain Analyzer has a sample cycle time approximately 7-11 seconds, depending on the grain. We require a grain analyzer that is both as accurate as possible, and can analyze samples in as little time as possible. The USDA is looking to find potential distributers of the mentioned or equivalent item that can meet the USDA's requirement. Please submit product specifications and pricing to the below contact for consideration. The following clauses and provisions apply to this acquisition. 52.252-2 Clauses Incorporated by Reference; 52.212-4 CONTRACT TERMS AND CONDITIONS - COMMERCIAL ITEMS; 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS - COMMERCIAL ITEMS applies, with the following clauses; 52.219-6 Notice of Total Small Business Set-Aside; 52.222-3, Convict Labor; 52.222-19 Child Labor-Cooperation with Authorities and Remedies; 52.222-21 Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Equal Opportunity for Workers with Disabilities; 52.223-9 Estimate of Percentage of Recovered Material Content for EPA-Designated Items; 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving; 52.225-1 Buy American-Supplies; 52.232-33, Payment by Electronic Funds Transfer-System for Award Management; 52.233-3, Protest after award; 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE; 52.212-1 INSTRUCTIONS TO OFFERORS - COMMERCIAL ITEMS; 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS - COMMERCIAL ITEMS, with this offer; a copy of this provision may be obtained at www.acquisition.gov/far. Contractors intending to conduct business with the Federal Government MUST register with the System for Award Management (SAM) database prior to submitting quotation. The SAM is the Government repository, which retains information on Government contractors. You may register online at www.sam.gov. All inquiries on this action can be submitted in writing via email to brian.fien@ars.usda.gov NO LATER THAN 23 March 2016 @ 11:30PM PST. All information shall be furnished at no cost or obligation to the Government.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:AG-0521-S-16-0006
  1. Combined Synopsis
  1. Combined SynopsisCurrentMay 10, 2016

    Brand name or equal Cropscan 3000H

    Notice 62cfc4d02ac090118764a8ad22988a79 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Solicitation Amendment 0002 for DK Boom spray rig for flat-bed truck
-Combined Synopsis11/13/2026
(1) Engine and Performance Min Requirements: (a.) Rated Engine Power: 180hp (b.) Maximum Engine Power: 195hp. (c.) Engine Configuration: 6.8 L, six-cylinder turbocharger. (d.) Turbocharger: Variable-geometry turbocharger. (e.) Intelligent Power Management: Up to 20ho boost for transport and non-stationary power take-off (PTO) applications. (f.) Selected Transmission: PowerQuad Plus; 20 forward / 20 reverse speeds. (g.) Maximum Transport Speed: 40 km/h (25 mph). (2) Wheel, Tire, and Axle Configuration: Designed with single front wheels for optimized turning radius, paired with dual rear wheels for maximum pulling traction. (a.) Rear Axle Setup: Dual (Double) Wheels. (b.) Rear Tire Size: 480/80R50 OR 480/80R46 (Duals on each side). (c.) Front Axle Setup: Single Wheels. (d.) Front Tire Size: 420-85R34 or 420/85R30 (single on each side). (e.) Rear Axle Dimension: R and P rear axle - 3.62 in. x 100. in. (f.) Front Axle Type: Unsuspended 4ED front axle or Triple Link Suspension (TLS) front axle (if available and required). (g.) Rear Rims: Adjustable cast wheels. (h.) Front Rims: Adjustable steel wheels. (3) Dimensions, Weight, and Ballasting: (a.) Wheelbase: 2,800 mm (110.2 in.) (b.) Drive Configuration: Mechanical front-wheel drive (MFWD)/4WD. (c.) Front Base Weight: 243 lbs. (d.) Additional Ballast: Quick attach and removal weights/ 1,706 lbs. total ballast. (4) Hydraulic, Hitch, and PTO Systems (min requirements): (a.) Hydraulic System: Pressure-and flow-compensated (PFC) closed-loop system. (b.) Hydraulic Pump Capacity: 114 L/min. (c.) Rear Selective Control Valves: As required for mission equipment. (d.) Rear PTO: Dual-speed 540/1,000 rpm. (e.) Rear Hitch: Category 3 3-point hitch. (f.) Center Link: Category 3 center link with ball end. (g.) Draft Links: Draft links with telescopic ball ends. (h.) Stabilizers: Stabilizer sway-control blocks. (5) Cab, Comfort, and Precision Ag Features: (a.) Cab Type: Enclosed cab with mechanical cab suspension. (b.) Operator Features: Passenger seat, 3-pin power socket, internal rear-view mirror, manually telescoping exterior mirrors, and rear-hitch remote control. (c.) Lighting Package: Economy lighting package with beacon light. (d.) Precision Agriculture Features: G5 Command Center display, StarFire receiver, and telematics connectivity (if required)
-Combined Synopsis11/24/2026
-AwardedOpen
The contractor shall provide Rotary Cutter mowing Units for Bonnet Carre Spillway as outlined in the Bidding Schedule and Material & Requirements Paragraphs. The contractor is responsible for purchasing and delivery of the units to the Bonnet Carre Spillway's project maintenance yard (16302 River Rd., Norco, LA).
-AwardedOpen
Amended to change NAICS code and repost. Disk Harrow
-Combined Synopsis09/15/2026

Additional Details

Solicitation Number

AG-0521-S-16-0006

Archive Date

Jun 7, 2016