Notice ID: 3b77bcc0903c8de91f59dae68d1342f7Award NoticeAwarded
24 Ton Pull Type Seed/Fertilizer Tender
Awarded on May 10, 2016. Full description on SAM.gov.
Awarded tounder AG-32SD-P-16-0305 (source: SAM.gov award notice)• $74.9K
Overview
- Posted
- May 11, 2016
- Notice type
- Award Notice
- NAICS
- 333111: Farm Machinery and Equipment Manufacturing
Notice details
- Place of performance
- USDA, ARS, PA, GRL 7207 W. Cheyenne Street, El Reno, 73036
- PSC
- 37: AGRICULTURAL MACHINERY AND EQPT
- Last updated
- Dec 4, 2025
- Award date
- May 10, 2016
- Award amount (SAM.gov award notice)
- $74.9K
Identifiers
- Solicitation number
- AG-32SD-RFQ-16-MD10
- Notice ID
- 3b77bcc0903c8de91f59dae68d1342f7
- Award number (PIID)
- AG-32SD-P-16-0305
Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. The solicitation number is AG-32SD-RFQ-16-MD10 and is issued as a request for quotation (RFQ). This solicitation document incorporates those provisions and clauses in effect through Federal Acquisition Circular 2005-87. The acquisition is a 100% Small Business Set-Aside. The NAICS code is 333111, business size standard is 500 Employees. The Government intends to issue a firm-fixed price purchase order for this requirement. The USDA, ARS, Grazinglands Research Laboratory, 7207 W. Cheyenne Street, El Reno, OK, 73036 has a requirement for one 24 Ton Pull Type Seed/Fertilizer Tender. Minimum Specifications-24 Ton Pull Type Seed/Fertilizer Tender: 1. Minimum 870 cubic ft., Stainless Steel Hoppers, (3) 8-Ton Modular Compartment Design 2. Belly and/or Rear Dump Capability 3. Hydraulic Hopper Doors 4. Hydraulic Clean Out Gates 5. Electric Control Panel 6. Hand Control Valves 7. Side Discharge 8. Safety Ports 9. Poly Cupped Augers on Stainless Steel Tube, or Conveyor System to Minimize Damage to Product 10. Tandem Axle, Tandem Dolly Jacks, A.B.S. Brakes, D.O.T. Light Package 11. (3) Electric Vibrators 12. Electric SRT-2 Roll Trap 13. Wet Line Model to Hook up to Truck Hydraulics, (No Self-contained Motor) 14. 2 Part Chemical Resistant Epoxy Primer and Urethane Top Coat 15. Hydraulic Raise, Lower and Swing with Remote Control QUOTES SHALL INCLUDE THE FOLLOWING: 1. Firm-Fixed Price to include delivery and setup (FOB Destination) to the USDA, ARS, Grazinglands Research Laboratory, 7207 W. Cheyenne St., El Reno, OK 73036. The schedule for delivery and setup for the equipment to the site is not later than July 15, 2016. Each quoter shall include their proposed delivery schedule as part of their quotation. Acceptance and FOB point are destination. 2. DUNS number for verification of SAM registration. (www.sam.gov) 3. Include literature sufficient to determine conformance of the equipment to meet or exceed the specifications. 4. Provide five (5) references supporting the ability to deliver and install the items on schedule and in quantities requested. Quoters are to provide: Customer; Contract/Task Order Number, Contract type, total contract value, description of work performed, and relevancy pertinent to this requirement, names, telephone numbers, and email address for point of contact. The Contractor must comply with the Farm Security and Rural Investment Act of 2002 (FSRIA), 7 U.S.C. 8102; the Food, Conservation and Energy Act of 2008 (FCEA), 7 U.S.C. 8102; the Federal Acquisition Regulation; Executive Order (EO) 13514, "Federal Leadership in Environmental, Energy and Economic Performance," dated October 5, 2009; EO 13423, "Strengthening Federal Environmental, Energy, and Transportation Management," dated January 24, 2007; and Presidential Memorandum, "Driving Innovation and Creating Jobs in Rural America through Biobased and Sustainable Product Procurement," dated February, 2012 to provide biobased products. The following clauses and provisions apply to this acquisition. 52.252-2 Clauses Incorporated by Reference; 52.212-4 CONTRACT TERMS AND CONDITIONS - COMMERCIAL ITEMS; 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS - COMMERCIAL ITEMS applies, with the following clauses 52.219-6 Notice of Total Small Business Set-Aside; 52.222-3, Convict Labor; 52.222-19 Child Labor-Cooperation with Authorities and Remedies; 52.222-21 Prohibition of Segregated Facilities; 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving; 52.225-13 Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer-System for Award Management; 52.223-1 Biobased Product Certification; 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE; 52.212-1 INSTRUCTIONS TO OFFERORS - COMMERCIAL ITEMS; 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS - COMMERCIAL ITEMS, with this offer; a copy of this provision may be obtained at www.acquisition.gov/far. Contractors intending to conduct business with the Federal Government MUST register with the System for Award Management (SAM) database prior to submitting quotation. The SAM is the Government repository, which retains information on Government contractors. You may register online at www.sam.gov. Any amendment and documents related to this procurement will be available electronically at the Internet site: http://www.fbo.gov. Potential offerors will be responsible for downloading their own copy of these documents (if any). It is the offerors responsibility to monitor the site for release of the solicitation and any related documents. Furnish quotations to Michael Douglas, Contracting Officer, no later than the response date and time listed in this solicitation. Quotations must be received in writing via facsimile, Email or mail to the contacts listed above.
Award Overview
Award Number
AG-32SD-P-16-0305
Award Amount (SAM.gov award notice)
$74.9K
Award Date
May 10, 2016
Awardee
Awardee UEI
MQWESKT83BS5
Original Solicitation
Notice ID: 3b77bcc0903c8de91f59dae68d1342f7
Posted Date: May 11, 2016
Original Response Deadline: Not specified
Contract Details
No FPDS record matches this award number at the same department yet
Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
Solicitation:
AG-32SD-RFQ-16-MD10- Combined Synopsis
- Awarded
This opportunity has been awarded.
- Combined SynopsisApr 11, 2016
24 Ton Pull Type Seed/Fertilizer Tender
- AwardedCurrentMay 11, 2016
24 Ton Pull Type Seed/Fertilizer Tender
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Purchase of tractor implement 3 point no-till seed drill. | - | Solicitation | 06/18/2026 |
Solicitation Amendment 0002 for DK Boom spray rig for flat-bed truck | - | Combined Synopsis | 11/13/2026 |
(1) Engine and Performance Min Requirements: (a.) Rated Engine Power: 180hp (b.) Maximum Engine Power: 195hp. (c.) Engine Configuration: 6.8 L, six-cylinder turbocharger. (d.) Turbocharger: Variable-geometry turbocharger. (e.) Intelligent Power Management: Up to 20ho boost for transport and non-stationary power take-off (PTO) applications. (f.) Selected Transmission: PowerQuad Plus; 20 forward / 20 reverse speeds. (g.) Maximum Transport Speed: 40 km/h (25 mph). (2) Wheel, Tire, and Axle Configuration: Designed with single front wheels for optimized turning radius, paired with dual rear wheels for maximum pulling traction. (a.) Rear Axle Setup: Dual (Double) Wheels. (b.) Rear Tire Size: 480/80R50 OR 480/80R46 (Duals on each side). (c.) Front Axle Setup: Single Wheels. (d.) Front Tire Size: 420-85R34 or 420/85R30 (single on each side). (e.) Rear Axle Dimension: R and P rear axle - 3.62 in. x 100. in. (f.) Front Axle Type: Unsuspended 4ED front axle or Triple Link Suspension (TLS) front axle (if available and required). (g.) Rear Rims: Adjustable cast wheels. (h.) Front Rims: Adjustable steel wheels. (3) Dimensions, Weight, and Ballasting: (a.) Wheelbase: 2,800 mm (110.2 in.) (b.) Drive Configuration: Mechanical front-wheel drive (MFWD)/4WD. (c.) Front Base Weight: 243 lbs. (d.) Additional Ballast: Quick attach and removal weights/ 1,706 lbs. total ballast. (4) Hydraulic, Hitch, and PTO Systems (min requirements): (a.) Hydraulic System: Pressure-and flow-compensated (PFC) closed-loop system. (b.) Hydraulic Pump Capacity: 114 L/min. (c.) Rear Selective Control Valves: As required for mission equipment. (d.) Rear PTO: Dual-speed 540/1,000 rpm. (e.) Rear Hitch: Category 3 3-point hitch. (f.) Center Link: Category 3 center link with ball end. (g.) Draft Links: Draft links with telescopic ball ends. (h.) Stabilizers: Stabilizer sway-control blocks. (5) Cab, Comfort, and Precision Ag Features: (a.) Cab Type: Enclosed cab with mechanical cab suspension. (b.) Operator Features: Passenger seat, 3-pin power socket, internal rear-view mirror, manually telescoping exterior mirrors, and rear-hitch remote control. (c.) Lighting Package: Economy lighting package with beacon light. (d.) Precision Agriculture Features: G5 Command Center display, StarFire receiver, and telematics connectivity (if required) | - | Combined Synopsis | 11/24/2026 |
The contractor shall provide Rotary Cutter mowing Units for Bonnet Carre Spillway as outlined in the Bidding Schedule and Material & Requirements Paragraphs. The contractor is responsible for purchasing and delivery of the units to the Bonnet Carre Spillway's project maintenance yard (16302 River Rd., Norco, LA). | - | Awarded | Open |
Amended to change NAICS code and repost. Disk Harrow | - | Combined Synopsis | 09/15/2026 |
Additional Details
Solicitation Number
AG-32SD-RFQ-16-MD10
Archive Date
May 25, 2016