GovChime
Notice ID: 698133f493cd09ac26784b9ec5b9315cAward NoticeAwarded

CLOSED LOOP STEAM-INJECTON WATER HEATING/COOLING SYSTEMS

Awarded on October 6, 2011. Full description on SAM.gov.

Awarded tounder AG-5680-P-12-0006 (source: SAM.gov award notice)• $32.2K

Overview

Posted
October 6, 2011
Notice type
Award Notice
NAICS
333618: Other Engine Equipment Manufacturing
Agency
Department of AgricultureFOREST SERVICE

Notice details

Office
FOREST PRODUCTS LABORATORY
Place of performance
ONE GIFFORD PINCHOT DR., Madison, 53726
PSC
66: INSTRUMENTS AND LABORATORY EQPT
Last updated
Dec 5, 2025
Award date
Oct 6, 2011
Award amount (SAM.gov award notice)
$32.2K

Identifiers

Solicitation number
AG-5680-S-11-0012
Notice ID
698133f493cd09ac26784b9ec5b9315c
Award number (PIID)
AG-5680-P-12-0006

Description

Closed-loop steam-injection water heating/cooling systems Specifications: We are looking heating system for jacketed glass-lined reactors. The working volume of the reactor is 1000 gallons and will be filled with aqueous solutions. The reactor jacket has a volume is 162 gallons and has a heating area of 127 sq. ft. The heat transfer coefficient for the vessel is estimated at 55 BtU/hr ft2 F. The heating system must be capable of producing a jacket temperature of at least 230 F. However, for future capabilities, all components, with the exception of the circulating pump, must be capable of operating the circulating loop to at least 300 F and 90 psi. The heating system must be capable of heating 1000 gallons of stirred water in the reactor from ambient to 140 F within 60 minutes. The system must be controlled in a cascade configuration wherein the master control loop, using the internal reactor temperature, controls the set-point of the jacket control loop. The controller must be capable of receiving the master input as a 0 20 mA process signal (converted from reactor RTD). The circulating heating system must use a steam-injection heater as the heat source (steam up to 170psi is available). The steam to the injector must operate using a pneumatically controlled actuator. The circulating system must also be equipped with controlled cooling capabilities using municipal water as the cooling water source. The cooling water valve must operate using a pneumatically controlled actuator. The heating system must be equipped with a back pressure relief valve (BPRV) adjustable from 30 to 90 psig. Steam condensate and water released from the BPRV will be sent to drain. The circulating pump must be sized appropriately for the system heating and cooling requirements and must be capable of pumping water at appropriate flow rates to the jacket elevated 20 feet above the pump. Bidders must supply one quote for a fully operational turn-key skid with the specifications above. Bidders must also supply a second quote for only system components that includes: steam injector, pneumatic steam valve, pneumatic cooling water valve and back pressure relief valve that are sized and meet the operating criteria specified above.

Full description on SAM.gov

Award Overview

Award Number

AG-5680-P-12-0006

Award Amount (SAM.gov award notice)

$32.2K

Award Date

Oct 6, 2011

Awardee

Awardee UEI

HDVNB76PULK5

Original Solicitation

Notice ID: 698133f493cd09ac26784b9ec5b9315c

Posted Date: Oct 6, 2011

Original Response Deadline: Not specified

Contacts

Contracting Officer

Primary Contact

Susan A Davis
Fax: 608-231-9585

Documents

No documents available.

Lifecycle

Solicitation:AG-5680-S-11-0012
  1. Combined Synopsis
  2. Awarded

This opportunity has been awarded.

  1. Combined SynopsisSep 1, 2011

    CLOSED LOOP STEAM-INJECTON WATER HEATING/COOLING SYSTEMS

    Notice f1a49047ad00cb29a9aff8882ccf0898 on SAM.gov

  2. AwardedCurrentOct 6, 2011

    CLOSED LOOP STEAM-INJECTON WATER HEATING/COOLING SYSTEMS

    Notice 698133f493cd09ac26784b9ec5b9315c on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline

Additional Details

Solicitation Number

AG-5680-S-11-0012

Archive Date

Oct 21, 2011