GovChime
Notice ID: b6a1b2644f1644e2b7d2e709ea06d497Sources SoughtArchived

Atomic Force Microscope for use in a Scanning Electron Microscope

Archived on January 1, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM EST
Posted
December 4, 2025
Notice type
Sources Sought
NAICS
334516: Analytical Laboratory Instrument Manufacturing
Agency
Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY

Notice details

Office
DEPT OF COMMERCE NIST
Place of performance
Gaithersburg, Maryland, 20899
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
NIST-SS26-CHIPS-34
Notice ID
b6a1b2644f1644e2b7d2e709ea06d497

Description

NIST-SS26-CHIPS-34

PLEASE NOTE THIS A SOURCES SOUGHT NOTICE ONLY

Title: Atomic Force Microscope for use in a Scanning Electron Microscope

BACKGROUND

As part of the CHIPS Act, researchers at the National Institute of Standards and Technology (NIST) are engaged in metrology research and development to promote innovation and industrial competitiveness in U.S. semiconductor device manufacturing. NIST has identified seven Grand Challenges in metrology research and development that require critical attention. As part of efforts to advance metrology tools and measurement science for Metrology for Materials Purity, Properties, and Provenance (Grand Challenge 1), NIST requires instruments for measurement of semiconductor microelectronic devices and their constituent materials.

Pursuant to the CHIPS mission, the Grand Challenge 1 Program’s strategy is to develop measurement technologies, properties data, and standards focused on defect and contaminant identification to support uniform materials quality and traceability across the supply chain. One effort within this program aims to evaluate two-dimensional and wide bandgap materials to improve device reliability. This work is led by NIST’s Applied Chemicals and Materials Division, which characterizes and measures properties and structures relevant to industrially important materials.

The requested equipment comprises a compact atomic force microscope (AFM) that can be used inside and outside a scanning electron microscope (SEM) for the CHIPS Metrology 1.01 project “Evaluation of 2D and Wide Band Gap Material Quality: Towards Device Reliability.”    This equipment will enable live correlative imaging of 2-dimensional (2D) materials/devices in concert with numerous pertinent analytical modes at single- to sub-nanometer spatial resolution as the materials/devices degrade under electronic and other applied stresses.  The equipment will be used to quantify material/device performance, inform optimization efforts from material synthesis methods to device fabrication and performance. 

This equipment is critical to meeting the project objectives by providing information about devices under test including device failure initiation and progression as well as simultaneous changes in electrical and mechanical performance that can reveal failure mechanism root causes.  This combined SEM-AFM capability will enable grain orientation of 2D materials to be quantified without removing the material from a substrate (i.e., in a nondestructive manner), which is highly desirable throughout the semiconductor R&D industry.  Moreover, when combined, these techniques have the potential to significantly streamline material/device fabrication, optimization, and reliability measurements for next generation 2D materials-based devices.  It is critical that this purchase occur as soon as possible due to our collaboration with Intel R&D who are beginning to implement device optimization strategies, one of which involves grain orientation-based transport properties.

The work required under this contract is to supply, install, and provide introductory training to users on a compact AFM for use in an SEM for the Applied Chemicals and Materials Division. The Contractor shall deliver AFM instrumentation capable of being used both inside and outside an SEM, that includes all appropriate electrical interconnects and cabling, vacuum feedthroughs, control units, SEM adapter plate(s), probe holders and probes for measuring mechanical, electrical, electro-mechanical, and magnetic properties, software module activations to enable those measurements, an enclosure with camera and cabling to enable AFM measurements outside an SEM, inclusive of FOB destination delivery, installation, warranty and training, and option line items, if applicable.

These are the minimum requirements are as follows:

Line Item 0001:

Description:  Atomic Force Microscope (AFM)

Quantity:  1

  1. Technical Specifications
    1. An atomic force microscope scan head capable of operating in an SEM vacuum chamber and at atmospheric pressure, with automatic multidimensional correlative imaging enabling simultaneous acquisition of AFM and SEM data.  The AFM measuring head shall be compatible with, and interchangeable among SEMs from different vendors (as specified below) without SEM modification.  The AFM shall be capable of operational modes that provide mechanical, electrical, electro-mechanical, and magnetic property measurements as described below.  Additional specifications include:
      1. AFM scan range shall be larger than (x, y, z) = (75, 75, 10) mm for open and closed loop operation modes with spatial resolution at least (x, y, z) = (0.2, 0.2, 0.05) nm.
      2. Shall accommodate samples having dimensions up to (x, y) = (50, 50) mm and height z = 8 mm. 
      3. Shall include electrical feedthroughs for:
        1. Zeiss Gemini 300 VP SEM and
        2. Thermo Fisher Scios 2 Dual Beam FIB-SEM
      4. Shall include SEM stage adaptors for:
        1. Zeiss Gemini 300 VP SEM and
        2. Thermo Fisher Scios 2 Dual Beam FIB-SEM
      5. Probe holder(s) for all measurement modes compatible with the instrument described in this SoW.
      6. Tools required to mount and dismount the scan head from SEM stage(s).
    2. A Control Unit to operate the AFM scan head and interface with the user and SEM:
      1. Power supply shall be configured for 110 V operation.
      2. Shall enable 125 MHz minimum sampling frequency
      3. Shall provide two (2) lock-in amplifiers with DC range up to 2 MHz
      4. Shall provide at least five (5) auxiliary analog input channels.
      5. Shall provide analog signal outputs for preamplifier, sample bias, current.
      6. Shall include port for communication with PC via Ethernet LAN.
      7. Control unit shall be accessible and programmable through ethernet connection.
      8. Control software shall be included for all standard and optional AFM modes included in these specifications.
      9. Kelvin Probe Force Microscopy (KPFM) / Piezoresponse Force Microscopy (PFM) module shall be activated.
      10. Scanning Spreading Resistance Microscopy module shall be activated.
      11. Shall include software user interface for controlling measurement parameters and measurements, drift correction, basic post-processing of acquired data.

    1. Accessories
      1. An enclosure for using the AFM scan head at ambient pressure outside the SEM that also enables using the AFM in various controlled gas atmospheres (i.e., N2, Ar, etc.).  The enclosure shall include passive mechanical damping.
      2. A digital camera with a stand to enable locating sample features of interest to be analyzed by the AFM in the ambient pressure enclosure indicated above.
      3. Cable adapter and appropriate cabling for use with the ambient pressure enclosure to connect the scan head to the controller.
      4. A sample rotation module that enables multiple samples to be mounted simultaneously and rotated into position for analysis with the scan head. 
      5. The following test reference samples shall be included:
        1. A test reference sample for calibration of KPFM mode (i.e., a sample consisting of arrays of aluminum and gold lines of different pitch deposited on oxide-covered silicon).
        2. A test reference sample for calibration/optimization of PFM mode.
        3. A test reference sample for phase imaging, energy dissipation, and F-z modes.
        4. A test reference sample for magnetic force microscopy (MFM)
        5. Calibration grating for topography and image correlation. 
      6. Probe sets including
        1. Ten (10) sets (1 set = 10 probes) of Akiyama self-sensing and self-activating probes.  Shall be compatible with the scan head and include appropriate probe holder.
        2. Ten (10) sets (1 set = 10 probes) of probes for conductive AFM measurements.  Shall be compatible with the scan head and include appropriate probe holder for conductive AFM measurements. 
        3. Ten (10) sets (1 set = 6 probes) of piezo-resistive sensing active probes for piezo-resistance AFM measurements.  Shall be compatible with the scan head and include appropriate holder for PFM measurements.
        4. Ten (10) sets (1 set = 10 probes) of probes for magnetic force microscopy (MFM) measurements.  Shall be compatible with the scan head and include appropriate holder for MFM measurements.
    2. Training
      1. The contractor shall provide basic training comprising one and a half (1) day of initial training that includes device installation, probe and sample preparation, software setup, basic measurements of tapping mode topography, energy dissipation, AFM-SEM image correlation
      2. The contractor shall provide a half day (0.5 day) training on the conductive AFM (cAFM) operation mode including methods used to record and display current-voltage (I-V) measurements/curves.
    3. Acceptance
      1. Site acceptance: At the NIST site the contractor shall acquire data with each module on contractor supplied test specimens. 
      2. The contractor shall provide personnel that meet government requirements to be on site for site acceptance. 
    4. Safety
      1. All components supplied by the contractor shall meet industry standards for safety, including those related to electrical components, mechanical components, and optical components.

Line Item 0002:  Warranty

The contractor shall warranty the entire system for a period of a minimum of 1 year and shall be in accordance with terms in FAR 52.212-4. Warranty shall commence upon acceptance of the system by the Government and at a minimum shall include return-to-vendor service.  Warranty does not apply to consumable parts or normal wear and tear.

HOW TO RESPOND TO THIS NOTICE

In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response.  Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact listed at the bottom of this notice as soon as possible, and preferably before the closing date and time of this notice.

•           Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company’s Unique Entity ID (UEI).

•           Details about what your company is capable of providing that meets or exceeds NIST’s minimum requirements.

•           Whether your company is an authorized reseller of the product or service being cited and evidence of such authorization.

•           Identify any aspects of the description of the requirements in the BACKGROUND section above that could be viewed as unduly restrictive or create unnecessary barriers that adversely affect your firm’s ability to fully participate in a procurement for such services and explain why.  Please offer suggestions for how the requirements could be organized or structured to encourage the participation of small businesses.

•           For the NAICS code

o          Indicate whether your company is (a) a small business or (b) other than small business.  See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information.

o          If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement.

•           If your firm has existing Federal Supply Schedule contract(s) or other contracts for products or services against which the Department may be able to place orders, identify the contract number(s) and other relevant information.

•           Describe your firm’s experience (as a prime, subcontractor, or consultant) providing the products or services described in Background section.

•           Provide any other information that you believe would be valuable for the Government to know as part of its market research for this requirement.

•           Please let us know if you would like to engage to get a better understanding of the requirement or need additional information about the Government’s requirement for the products or services described in the Background section.

QUESTIONS REGARDING THIS NOTICE

Questions regarding this notice may be submitted via email to the Primary Point of Contact listed in this notice. Questions should be submitted so that they are received by 5:00 p.m. Eastern Time on December 17, 2025.  Questions will be anonymized and answered via sources sought notice amendment following the question submission deadline.

IMPORTANT NOTES

The information received in response to this notice will be reviewed and considered so that the NIST may appropriately solicit for its requirements in the near future. 

This notice should not be construed as a commitment by the NIST to issue a solicitation or ultimately award a contract. 

This notice is not a request for a quotation. Responses will not be considered as proposals or quotations.

No award will be made as a result of this notice. 

NIST is not responsible for any costs incurred by the respondents to this notice.

NIST reserves the right to use information provided by respondents for any purpose deemed necessary and appropriate.

Thank you for taking the time to submit a response to this request.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

  1. 3
    Version 3Sources SoughtArchivedCurrent

    Atomic Force Microscope for use in a Scanning Electron Microscope

    Notice b6a1b2644f1644e2b7d2e709ea06d497 on SAM.gov

  2. 6
    Version 6Combined Synopsis/SolicitationArchived

    Type changed from Sources Sought to Combined Synopsis/Solicitation

    Atomic Force Microscope for use in a Scanning Electron Microscope

    Notice 9665f77e810d47b6b0429db1a86d0563 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
84%
Market Research11/20/2026
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.
84%
Market Research11/28/2026
74%
Market Research12/05/2026
74%
Market Research12/03/2026
THIS IS A NOTICE OF INTENT TO SOLE SOURCE, NOT A REQUEST FOR A QUOTE (RFQ). A RFQ WILL NOT BE ISSUED AND QUOTES WILL NOT BE REQUESTED. Naval Surface Warfare Center Indian Head Division (NSWC, IHD), intends to award a firm fixed price contract on a noncompetitive basis to TA Instruments-Waters LLC, to provide the following service: Differential Scanning Calorimeter and Thermal Gravimetric Analyzer This action is to be undertaken in accordance with FAR 12.102 (a) Soliciting from a single source, on the basis that the vendor is the only known source capable of meeting the government’s requirements The North American Industry Classification System (NAICS) for this requirement is 334516. The FSC code is 6640. The resulting contract will be a firm fixed price contract. Negotiation being conducted using other than full and open competition procedures pursuant to authority of 41 USC 1901. This Notice of Intent is NOT a request for quotes. Interested parties may identify their interests and capability to respond to this requirement by November 16, 2026 at 10AM (EST). Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Information received will be considered solely for the purpose of determining whether or not to conduct a competitive procurement. The determination not to compete this proposed contract action is solely within the discretion of the Government. The Government will not be responsible for any costs incurred by responding to this notice. Responses to this electronic notice must be made by 16 November 10:00am EST on 2026. Interested vendors must be registered in the System for Award Management (SAM) at https://www.sam.gove/portal/public/SAM. Oral communications are not acceptable in response to this notice. Interested parties shall e-mail all statements and capabilities to Marjorie Gray, via email: marjorie.m.gray2.civ@us.navy.mil and must provide clear and concise documentation indicating a vendor's bona fide capability.
73%
Special Notice11/16/2026

Additional Details

Solicitation Number

NIST-SS26-CHIPS-34

Archive Date

Jan 1, 2026

Office Address

GAITHERSBURG, MD, 20899