Notice ID: ba93080c30c3430a93a2c3f7bde7038fCombined Synopsis/Solicitation
3D Foot Scanner for Boot Fitting
Responses closed . Full description on SAM.gov.
Overview
- Response deadline
- 6:00 PM EDT
- Posted
- September 16, 2026
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 339999: All Other Miscellaneous Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.MISSION INSTALLATION CONTRACTING COMMAND.419TH CSB.W6QM MICC-FT DRUM
- Place of performance
- Room 143, BLDG 10400Leaders Training Brigade10400 Tank Hill PkwyFort Jackson, SC 29207, 29207
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W911S226U4505
- Notice ID
- ba93080c30c3430a93a2c3f7bde7038f
Description
amended to change PSC Code and NAICS Bottom Line Up Front (BLUF)The Brigade requires the procurement of ten (10) commercial-off-the-shelf (COTS), brand-agnostic Automated 3D Digital Footwear Fitting Systems and associated annual technical service. This acquisition modernizes the Initial Entry Training (IET) Clothing Initial Issue Point (CIIP) across the Reception Battalions. It directly addresses initial issue throughput constraints, eliminates manual sizing inaccuracies, and mitigates preventable lower-extremity musculoskeletal injuries (MSKIs) among incoming trainees.Operational JustificationReception Battalions process thousands of trainees per cycle under stringent processing timelines. Traditional manual measurement devices are prone to significant operator error, fail to capture volumetric dimensions and arch compression under load, and regularly lead to improperly fitted combat footwear. Ill-fitting boots remain a primary driver of preventable sick call visits, cellulitis, severe blister friction, and training pipeline attrition during Basic Combat Training (BCT) and One Station Unit Training (OSUT). Implementing an automated digital system allows duty personnel to capture comprehensive foot dimensions in under 20 seconds per soldier, ensuring objective, repeatable fit accuracy that protects force health and training timelines.Salient CharacteristicsTo maintain full and open competition, the solicited systems must operate using non-invasive optical or sensor-based 3D surface scanning that measures standing volumetric foot dimensions under standard body weight. The units must capture dual-foot length, width, arch height, heel width, ball girth, and pressure distribution within a single scan cycle not exceeding 20 seconds. Systems must incorporate automated sizing algorithms that directly convert millimeter scan data into standard military combat boot sizing across all standard lengths and widths (Narrow, Regular, Wide, and Extra Wide). Additionally, each unit must feature a self-contained, ruggedized platform built for high-tempo daily recruit volume, an intuitive touchscreen interface for operators, and continuous software support and diagnostic calibration capability.Unit Distribution and Operational ContinuityThe ten requested systems will be allocated based on trainee reception volume and mission continuity requirements. The 120th Adjutant General (AG) Battalion will receive four (4) systems to support its high-volume throughput requirements. The 30th, 43rd, and 95th AG Battalions will each receive two (2) systems to outfit their primary CIIP processing stations. The final system will be assigned to the Brigade/LTB headquarters as an operational reserve float. This designated spare ensures that any unexpected hardware malfunction, maintenance cycle, or recalibration event at a subordinate reception battalion can be addressed immediately without disrupting intake schedules.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Documents
Links (4)
- PIEE Solicitation Module Link for W911S226U4505piee.eb.milPosted
- Web Based Training for the PIEE Solicitation Modulepieetraining.eb.milPosted
- Registration Instructions for the PIEE Solicitation Modulewww.acq.osd.milPosted
- Department of Defense Procurement Toolboxdodprocurementtoolbox.comPosted
Lifecycle
- 1Version 1Combined Synopsis/Solicitation
3D Foot Scanner for Boot Fitting
- 2Version 2Combined Synopsis/SolicitationCurrent
3D Foot Scanner for Boot Fitting
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Reason for update is to change the NAICS from 922160 to 339999 Balaclava, Hood Flame resistant. a. Arc Rating: 42 cal/cm2 b.CAT 3 c. Fabric/Material: 6oz OPF Blend Knit d. Double Layer Top and Bib, e. Full head and facial protection extends below neckline f. Designed for use with arc goggle g. Lightweight, durable and breathable h. Flat seams designed for comfort i. Inherently flame resistant, FR protection will not wash or wear out j. FR fabric will not melt, drip or ignite k. Size: One size fits all l. Color Olive Drab Green or Black, m. Gender: unisex n. Moisture wicking and quick drying | - | Combined Synopsis | 11/10/2026 |
amended to change NAICS code. Fire pump system | - | Combined Synopsis | 11/10/2026 |
amended to change NAICS code. Zippers | - | Combined Synopsis | 11/10/2026 |
amended to add set aside code and to change NAICS code. 6l capacity Autonomous Portable blood Refrigeration Unit | - | Combined Synopsis | 10/22/2026 |
567 Tar Shield Salient Characteristics for Matrix: The contractor shall furnish and deliver one (1) splash shield partition room meeting the following minimum salient characteristics: Metal Frame Tubing: 5 ft -0 inches W 2 inches x 4 inches. One tube for top and one tube for bottom. Metal Frame Tubing for Curtain Areas:16 ft -0 inches W 2 inches x 4 inches. One tube for top and one tube for bottom.16 ft -0 inches W 2 inches x 4 inches One tube for top and one tube for bottom. No Ceiling with the partition room. Angle-iron frame, finished with gray powder coating. Two doors each to be equipped with a keyed cylinder lock on door. FOR FULL PANELS Overall partition height of 8 feet, 5 inches with minimum 4-inch open clearance on the bottom of all panels except the doors. Each Panel shall be in width of no more or no less than: 1/4-inch-thick clear polycarbonate.2 ft 0 inches Panel5 ft 0 inches Top and Bottom Tube9 ft 0 inches Panel 10 ft 0 inches Panel3 ft 7 inches Door1 ft 9 inches Panel7 ft 6 inches Panel 7 ft 0 inches Panel8 ft 0 inches Panel 10 ft 0 inches Panel 10 ft 0 inches Panel6 ft 0 inches Panel5 ft 4 inches Panel 10 ft 0 inches Panel8 ft 11 inches Panel3 ft 7 inches Door Material shall be delivered to the Government-designated location. Government-furnished / not included: Industrial sliding curtains for the two Section #6 openings. Strip door for the Section #9 opening. Purchase only, no install requested. The cited vendor quote identifies the partition as a single room with polycarbonate panels and a door, with the above framing, finish, height, and lock requirements. | - | Combined Synopsis | 10/06/2026 |
Additional Details
Solicitation Number
W911S226U4505
Archive Date
Sep 16, 2027
Office Address
FORT DRUM, NY, 13602-5220