Notice ID: c192081f21c94091887bf34fda071888Combined Synopsis/Solicitation
Forced Ejection Scraper
Responses closed . Full description on SAM.gov.
Overview
- Response deadline
- 9:15 AM CST
- Posted
- January 8, 2026
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Total Small Business Set-Aside (FAR 19.5)
- NAICS
- 333120: Construction Machinery Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- AMC.ACC.MISSION INSTALLATION CONTRACTING COMMAND.419TH CSB.W6QM MICC-FT DRUM
- Place of performance
- Ft. Sill, Oklahoma, 73503
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
Identifiers
- Solicitation number
- W911S226U2405
- Notice ID
- c192081f21c94091887bf34fda071888
Description
Holcomb 1400N scraper is ideal for heavier applications such as industrial work. Other typical applications include terrace, land leveling, site preparation, ponds, water impoundment, sub division, farm, new and rebuilding work. Heaped capacity: 14 cubic yards, Struck capacity: 11 cubic yards, Width of cut: 108 inches, Tire size (front) 20.5 x 25 inches, weight: 14,000 pounds, Horsepower requirements: 200plus, Hydraulic outlets: at least 3, Hydraulic flow: 20 gallons per minute. With delivery
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
Links (4)
- PIEE Solicitation Module Link for W911S226U2405piee.eb.milPosted
- Web Based Training for the PIEE Solicitation Modulepieetraining.eb.milPosted
- Registration Instructions for the PIEE Solicitation Modulewww.acq.osd.milPosted
- Department of Defense Procurement Toolboxdodprocurementtoolbox.comPosted
Lifecycle
- 1Version 1Combined Synopsis/SolicitationCurrent
Forced Ejection Scraper
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
backhoe-loader | 74% | Combined Synopsis | 07/14/2026 |
**ADMEND NAICS CODE CHANGED **** Front End Wheeled Loader - Fort Bragg | 74% | Combined Synopsis | 07/10/2026 |
(1) Engine and Performance Min Requirements: (a.) Rated Engine Power: 180hp (b.) Maximum Engine Power: 195hp. (c.) Engine Configuration: 6.8 L, six-cylinder turbocharger. (d.) Turbocharger: Variable-geometry turbocharger. (e.) Intelligent Power Management: Up to 20ho boost for transport and non-stationary power take-off (PTO) applications. (f.) Selected Transmission: PowerQuad Plus; 20 forward / 20 reverse speeds. (g.) Maximum Transport Speed: 40 km/h (25 mph). (2) Wheel, Tire, and Axle Configuration: Designed with single front wheels for optimized turning radius, paired with dual rear wheels for maximum pulling traction. (a.) Rear Axle Setup: Dual (Double) Wheels. (b.) Rear Tire Size: 480/80R50 OR 480/80R46 (Duals on each side). (c.) Front Axle Setup: Single Wheels. (d.) Front Tire Size: 420-85R34 or 420/85R30 (single on each side). (e.) Rear Axle Dimension: R and P rear axle - 3.62 in. x 100. in. (f.) Front Axle Type: Unsuspended 4ED front axle or Triple Link Suspension (TLS) front axle (if available and required). (g.) Rear Rims: Adjustable cast wheels. (h.) Front Rims: Adjustable steel wheels. (3) Dimensions, Weight, and Ballasting: (a.) Wheelbase: 2,800 mm (110.2 in.) (b.) Drive Configuration: Mechanical front-wheel drive (MFWD)/4WD. (c.) Front Base Weight: 243 lbs. (d.) Additional Ballast: Quick attach and removal weights/ 1,706 lbs. total ballast. (4) Hydraulic, Hitch, and PTO Systems (min requirements): (a.) Hydraulic System: Pressure-and flow-compensated (PFC) closed-loop system. (b.) Hydraulic Pump Capacity: 114 L/min. (c.) Rear Selective Control Valves: As required for mission equipment. (d.) Rear PTO: Dual-speed 540/1,000 rpm. (e.) Rear Hitch: Category 3 3-point hitch. (f.) Center Link: Category 3 center link with ball end. (g.) Draft Links: Draft links with telescopic ball ends. (h.) Stabilizers: Stabilizer sway-control blocks. (5) Cab, Comfort, and Precision Ag Features: (a.) Cab Type: Enclosed cab with mechanical cab suspension. (b.) Operator Features: Passenger seat, 3-pin power socket, internal rear-view mirror, manually telescoping exterior mirrors, and rear-hitch remote control. (c.) Lighting Package: Economy lighting package with beacon light. (d.) Precision Agriculture Features: G5 Command Center display, StarFire receiver, and telematics connectivity (if required) | 62% | Combined Synopsis | 11/24/2026 |
tractor stump grinder | 62% | Combined Synopsis | 09/05/2026 |
UTV | 62% | Combined Synopsis | 09/04/2026 |
Additional Details
Solicitation Number
W911S226U2405
Archive Date
Jan 8, 2027
Office Address
FORT DRUM, NY, 13602-5220